IWEB does not delete old pages on  .mac account when changes are made.

I deleted one "movie" page and added a different one via IWEB. I changed the name of the site. I saved it to a folder on my drive and updated the .mac account.
When I checked my .mac folder, WEB>Sites>IWeb contains a folder with the new site name. That folder contains each of the pages and associated folders, html's.
However, using a previously saved .html, I can still access the old named web site which contains the un-desired deleted page. That deleted page and the entire site funtion as though it was never removed.
This "removed site" and all its pages does not appear any place in the .mac account's file listings.
What is happening that I can't remove a page using the procedure listed in the IWEB documentation?
Anyone have any thoughts?

However, using a previously saved .html, I can still
access the old named web site which contains the
un-desired deleted page.
Was the old site also produced by iWeb? Why are you "saving to a folder on your drive and updating the .mac account" instead of publishing directly into .Mac?
That deleted page and the
entire site funtion as though it was never removed.
This "removed site" and all its pages does not appear
any place in the .mac account's file listings.
Are you sure they are not in the Sites folder used by Homepage? What is the url?
If they really are not anywhere on your iDisk, then perhaps they are being cached somewhere and will eventually disappear.

Similar Messages

  • Account assignment not updated in SRM's shopping cart when changes are made in ERP's PO - Classic Scenario

    Hello!
    A customer has classic scenario and creates shopping carts using only cost center as account assignments in SRM.
    When the PO is created in ERP's backend, sometimes a purchaser changes the account assignment to Asset("A").
    The account assignment changed in ERP is not reflecting in the shopping cart and the result is that the requester can not make a goods receipt in SRM because the account assignment does not match the PO.
    Does anybody knows what shall be done so the account assignment in SRM is updated according to ERP?
    Shall I use BBP_DOC_CHANGE_BADI?
    Thanks in advance!
    Best regards,
    Karin

    Hi Karin,
    As Mithun rightly said, the changes made to the PO will not be reflected in the SC not just in Classic but in Extended Classic Scenario as well.
    We create a Confirmation against a PO and not against SC, so it is not necessary that the SC needs to be updated.
    Is the system allowing the creation of the Confirmation or is the error coming up when the confirmation is being posted on the backend system?
    Can you check the SLG1 in SRM for the error that it is triggering when the PO is changed?
    Regards

  • The new 5.0.1 version does not open new pages in new tabs when the feature is checked in options\tabs. How do I fix it?

    When I check the feature in Tools\Options\Tab
    "Open new windows in a new tab instead" it does not do so. New windows are launched in the existing tab.

    If images are missing then check that you aren't blocking images from some domains.
    See:
    * http://kb.mozillazine.org/Images_or_animations_do_not_load
    * Check the permissions for the domain in the current tab in Tools > Page Info > Permissions
    * Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    * Check the exceptions in Tools > Options > Content: Load Images > Exceptions
    * Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images)
    There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Pam.conf does not use ldap for password length check when changing passwd

    I have already posted this in the directory server forum but since it is to do with pam not using ldap I thought there might be some pam experts who check this forum.
    I have dsee 6.0 installed on a solaris 10 server (client).
    I have a solaris 9 server (server) set up to use ldap authentication.
    bash-2.05# cat /var/ldap/ldap_client_file
    # Do not edit this file manually; your changes will be lost.Please use ldapclient (1M) instead.
    NS_LDAP_FILE_VERSION= 2.0
    NS_LDAP_SERVERS= X, Y
    NS_LDAP_SEARCH_BASEDN= dc=A,dc= B,dc= C
    NS_LDAP_AUTH= tls:simple
    NS_LDAP_SEARCH_REF= FALSE
    NS_LDAP_SEARCH_SCOPE= one
    NS_LDAP_SEARCH_TIME= 30
    NS_LDAP_SERVER_PREF= X.A.B.C, Y.A.B.C
    NS_LDAP_CACHETTL= 43200
    NS_LDAP_PROFILE= tls_profile
    NS_LDAP_CREDENTIAL_LEVEL= proxy
    NS_LDAP_SERVICE_SEARCH_DESC= passwd:ou=People,dc=A,dc=B,dc=com?one
    NS_LDAP_SERVICE_SEARCH_DESC= group:ou=People,dc=A,dc=B,dc=C?one
    NS_LDAP_SERVICE_SEARCH_DESC= shadow:ou=People,dc=A,dc=B,dc=C?one
    NS_LDAP_BIND_TIME= 10
    bash-2.05# cat /var/ldap/ldap_client_cred
    # Do not edit this file manually; your changes will be lost.Please use ldapclient (1M) instead.
    NS_LDAP_BINDDN= cn=proxyagent,ou=profile,dc=A,dc=B,dc=C
    NS_LDAP_BINDPASSWD= {NS1}6ff7353e346f87a7
    bash-2.05# cat /etc/nsswitch.conf
    # /etc/nsswitch.ldap:
    # An example file that could be copied over to /etc/nsswitch.conf; it
    # uses LDAP in conjunction with files.
    # "hosts:" and "services:" in this file are used only if the
    # /etc/netconfig file has a "-" for nametoaddr_libs of "inet" transports.
    # the following two lines obviate the "+" entry in /etc/passwd and /etc/group.
    passwd: files ldap
    group: files ldap
    # consult /etc "files" only if ldap is down.
    hosts: files dns
    ipnodes: files
    # Uncomment the following line and comment out the above to resolve
    # both IPv4 and IPv6 addresses from the ipnodes databases. Note that
    # IPv4 addresses are searched in all of the ipnodes databases before
    # searching the hosts databases. Before turning this option on, consult
    # the Network Administration Guide for more details on using IPv6.
    #ipnodes: ldap [NOTFOUND=return] files
    networks: files
    protocols: files
    rpc: files
    ethers: files
    netmasks: files
    bootparams: files
    publickey: files
    netgroup: ldap
    automount: files ldap
    aliases: files ldap
    # for efficient getservbyname() avoid ldap
    services: files ldap
    sendmailvars: files
    printers: user files ldap
    auth_attr: files ldap
    prof_attr: files ldap
    project: files ldap
    bash-2.05# cat /etc/pam.conf
    #ident "@(#)pam.conf 1.20 02/01/23 SMI"
    # Copyright 1996-2002 Sun Microsystems, Inc. All rights reserved.
    # Use is subject to license terms.
    # PAM configuration
    # Unless explicitly defined, all services use the modules
    # defined in the "other" section.
    # Modules are defined with relative pathnames, i.e., they are
    # relative to /usr/lib/security/$ISA. Absolute path names, as
    # present in this file in previous releases are still acceptable.
    # Authentication management
    # login service (explicit because of pam_dial_auth)
    login auth requisite pam_authtok_get.so.1 debug
    login auth required pam_dhkeys.so.1 debug
    login auth required pam_dial_auth.so.1 debug
    login auth binding pam_unix_auth.so.1 server_policy debug
    login auth required pam_ldap.so.1 use_first_pass debug
    # rlogin service (explicit because of pam_rhost_auth)
    rlogin auth sufficient pam_rhosts_auth.so.1
    rlogin auth requisite pam_authtok_get.so.1
    rlogin auth required pam_dhkeys.so.1
    rlogin auth binding pam_unix_auth.so.1 server_policy
    rlogin auth required pam_ldap.so.1 use_first_pass
    # rsh service (explicit because of pam_rhost_auth,
    # and pam_unix_auth for meaningful pam_setcred)
    rsh auth sufficient pam_rhosts_auth.so.1
    rsh auth required pam_unix_auth.so.1
    # PPP service (explicit because of pam_dial_auth)
    ppp auth requisite pam_authtok_get.so.1
    ppp auth required pam_dhkeys.so.1
    ppp auth required pam_dial_auth.so.1
    ppp auth binding pam_unix_auth.so.1 server_policy
    ppp auth required pam_ldap.so.1 use_first_pass
    # Default definitions for Authentication management
    # Used when service name is not explicitly mentioned for authenctication
    other auth requisite pam_authtok_get.so.1 debug
    other auth required pam_dhkeys.so.1 debug
    other auth binding pam_unix_auth.so.1 server_policy debug
    other auth required pam_ldap.so.1 use_first_pass debug
    # passwd command (explicit because of a different authentication module)
    passwd auth binding pam_passwd_auth.so.1 server_policy debug
    passwd auth required pam_ldap.so.1 use_first_pass debug
    # cron service (explicit because of non-usage of pam_roles.so.1)
    cron account required pam_projects.so.1
    cron account required pam_unix_account.so.1
    # Default definition for Account management
    # Used when service name is not explicitly mentioned for account management
    other account requisite pam_roles.so.1 debug
    other account required pam_projects.so.1 debug
    other account binding pam_unix_account.so.1 server_policy debug
    other account required pam_ldap.so.1 no_pass debug
    # Default definition for Session management
    # Used when service name is not explicitly mentioned for session management
    other session required pam_unix_session.so.1
    # Default definition for Password management
    # Used when service name is not explicitly mentioned for password management
    other password required pam_dhkeys.so.1 debug
    other password requisite pam_authtok_get.so.1 debug
    other password requisite pam_authtok_check.so.1 debug
    other password required pam_authtok_store.so.1 server_policy debug
    # Support for Kerberos V5 authentication (uncomment to use Kerberos)
    #rlogin auth optional pam_krb5.so.1 try_first_pass
    #login auth optional pam_krb5.so.1 try_first_pass
    #other auth optional pam_krb5.so.1 try_first_pass
    #cron account optional pam_krb5.so.1
    #other account optional pam_krb5.so.1
    #other session optional pam_krb5.so.1
    #other password optional pam_krb5.so.1 try_first_pass
    I can ssh into client with user VV which does not exist locally but exists in the directory server. This is from /var/adm/messages on the ldap client):
    May 17 15:25:07 client sshd[26956]: [ID 634615 auth.debug] pam_authtok_get:pam_sm_authenticate: flags = 0
    May 17 15:25:11 client sshd[26956]: [ID 896952 auth.debug] pam_unix_auth: entering pam_sm_authenticate()
    May 17 15:25:11 client sshd[26956]: [ID 285619 auth.debug] ldap pam_sm_authenticate(sshd VV), flags = 0
    May 17 15:25:11 client sshd[26956]: [ID 509786 auth.debug] roles pam_sm_authenticate, service = sshd user = VV ruser = not set rhost = h.A.B.C
    May 17 15:25:11 client sshd[26956]: [ID 579461 auth.debug] pam_unix_account: entering pam_sm_acct_mgmt()
    May 17 15:25:11 client sshd[26956]: [ID 724664 auth.debug] pam_ldap pam_sm_acct_mgmt: illegal option no_pass
    May 17 15:25:11 client sshd[26956]: [ID 100510 auth.debug] ldap pam_sm_acct_mgmt(VV), flags = 0
    May 17 15:25:11 client sshd[26953]: [ID 800047 auth.info] Accepted keyboard-interactive/pam for VV from 10.115.1.251 port 2703 ssh2
    May 17 15:25:11 client sshd[26953]: [ID 914923 auth.debug] pam_dhkeys: no valid mechs found. Trying AUTH_DES.
    May 17 15:25:11 client sshd[26953]: [ID 499478 auth.debug] pam_dhkeys: get_and_set_seckey: could not get secret key for keytype 192-0
    May 17 15:25:11 client sshd[26953]: [ID 507889 auth.debug] pam_dhkeys: mech key totals:
    May 17 15:25:11 client sshd[26953]: [ID 991756 auth.debug] pam_dhkeys: 0 valid mechanism(s)
    May 17 15:25:11 client sshd[26953]: [ID 898160 auth.debug] pam_dhkeys: 0 secret key(s) retrieved
    May 17 15:25:11 client sshd[26953]: [ID 403608 auth.debug] pam_dhkeys: 0 passwd decrypt successes
    May 17 15:25:11 client sshd[26953]: [ID 327308 auth.debug] pam_dhkeys: 0 secret key(s) set
    May 17 15:25:11 client sshd[26958]: [ID 965073 auth.debug] pam_dhkeys: cred reinit/refresh ignored
    If I try to then change the password with the `passwd` command it does not use the password policy on the directory server but the default defined in /etc/default/passwd
    bash-2.05$ passwd
    passwd: Changing password for VV
    Enter existing login password:
    New Password:
    passwd: Password too short - must be at least 8 characters.
    Please try again
    May 17 15:26:17 client passwd[27014]: [ID 285619 user.debug] ldap pam_sm_authenticate(passwd VV), flags = 0
    May 17 15:26:17 client passwd[27014]: [ID 509786 user.debug] roles pam_sm_authenticate, service = passwd user = VV ruser = not set rhost = not set
    May 17 15:26:17 client passwd[27014]: [ID 579461 user.debug] pam_unix_account: entering pam_sm_acct_mgmt()
    May 17 15:26:17 client passwd[27014]: [ID 724664 user.debug] pam_ldap pam_sm_acct_mgmt: illegal option no_pass
    May 17 15:26:17 client passwd[27014]: [ID 100510 user.debug] ldap pam_sm_acct_mgmt(VV), flags = 80000000
    May 17 15:26:17 client passwd[27014]: [ID 985558 user.debug] pam_dhkeys: entered pam_sm_chauthtok()
    May 17 15:26:17 client passwd[27014]: [ID 988707 user.debug] read_authtok: Copied AUTHTOK to OLDAUTHTOK
    May 17 15:26:20 client passwd[27014]: [ID 558286 user.debug] pam_authtok_check: pam_sm_chauthok called
    May 17 15:26:20 client passwd[27014]: [ID 271931 user.debug] pam_authtok_check: minimum length from /etc/default/passwd: 8
    May 17 15:26:20 client passwd[27014]: [ID 985558 user.debug] pam_dhkeys: entered pam_sm_chauthtok()
    May 17 15:26:20 client passwd[27014]: [ID 417489 user.debug] pam_dhkeys: OLDRPCPASS already set
    I am using the default policy on the directory server which states a minimum password length of 6 characters.
    server:root:LDAP_Master:/var/opt/SUNWdsee/dscc6/dcc/ads/ldif#dsconf get-server-prop -h server -p 389|grep ^pwd-
    pwd-accept-hashed-pwd-enabled : N/A
    pwd-check-enabled : off
    pwd-compat-mode : DS6-mode
    pwd-expire-no-warning-enabled : on
    pwd-expire-warning-delay : 1d
    pwd-failure-count-interval : 10m
    pwd-grace-login-limit : disabled
    pwd-keep-last-auth-time-enabled : off
    pwd-lockout-duration : disabled
    pwd-lockout-enabled : off
    pwd-lockout-repl-priority-enabled : on
    pwd-max-age : disabled
    pwd-max-failure-count : 3
    pwd-max-history-count : disabled
    pwd-min-age : disabled
    pwd-min-length : 6
    pwd-mod-gen-length : 6
    pwd-must-change-enabled : off
    pwd-root-dn-bypass-enabled : off
    pwd-safe-modify-enabled : off
    pwd-storage-scheme : CRYPT
    pwd-strong-check-dictionary-path : /opt/SUNWdsee/ds6/plugins/words-english-big.txt
    pwd-strong-check-enabled : off
    pwd-strong-check-require-charset : lower
    pwd-strong-check-require-charset : upper
    pwd-strong-check-require-charset : digit
    pwd-strong-check-require-charset : special
    pwd-supported-storage-scheme : CRYPT
    pwd-supported-storage-scheme : SHA
    pwd-supported-storage-scheme : SSHA
    pwd-supported-storage-scheme : NS-MTA-MD5
    pwd-supported-storage-scheme : CLEAR
    pwd-user-change-enabled : off
    Whereas /etc/default/passwd on the ldap client says passwords must be 8 characters. This is seen with the pam_authtok_check: minimum length from /etc/default/passwd: 8
    . It is clearly not using the policy from the directory server but checking locally. So I can login ok using the ldap server for authentication but when I try to change the password it does not use the policy from the server which says I only need a minimum lenght of 6 characters.
    I have read that pam_ldap is only supported for directory server 5.2. Because I am running ds6 and with password compatability in ds6 mode maybe this is my problem. Does anyone know of any updated pam_ldap modules for solaris 9?
    Edited by: ericduggan on Sep 8, 2008 5:30 AM

    you can try passwd -r ldap for changing the ldap passwds...

  • How to not retriggered output type when changes are made in Purchase Order

    Hi All,
    Could you let me know how can I resolve this one?
    We have a custom output type. Now this output type should NOT be automatically retriggered if a change is made to the document/purchase order. Currently the system automatically repeating the output type for every change made to the document/purchase order. But there is still an option for the user to be able to manually repeat the output.
    TIA

    Hi,
    1.In order to restrict the output type to trigger you need to write the requirement routine in transaction
       VOFM> requirements>output control.
    2. create the requirement routine in application EF and write the required logic and pass the sy-subrc EQ 4 if you not require to trigger the output type and pass sy-subrc equal 0 to trigger the output type.
    3. assign this requirement routine to custom output type.

  • Ios7 does not delete old pop server

    My company has recently changed servers for our email accounts. I have deleted the old account and SMTP server from my iphone. I added the new pop account with the new server and have SSL activated. I can receive email just fine. However, when I try to send or reply to an email a message comes up that says "Cannot Send Mail, The user name or password for "old server" is incorrect". This "old server" was deleted, so when trying to access the settings option on this message, it takes me to the new account. Checking the SMTP server the name is correct, as this SMTP account is on as the primary server. Why will ios7 not accept the new server name, and why is it trying to use the "old server" name as the SMTP outging server?

    Apparently, Mail sometimes fails to remove messages from the server when Remove copy from server is set to Right away -- don’t know why.
    I can only guess Mail sometimes has problems communicating with the server, and precisely because the setting is Right away, never tries again. I’d try changing the setting to After one day or When moved from Inbox, and see whether that makes a difference.
    Also, go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list.
    Have you checked whether Thunderbird does remove the messages from that server?
    BTW, woodie is wrong. It’s true that Gmail ignores any requests to delete messages from the server made by a POP client, but it doesn’t let the same messages to be downloaded more than once via POP either. Gmail just doesn’t work like a normal POP server would.

  • IWeb does not open the pages I made

    This may be a silly question--new to Mac and to web pages.
    But anyway, I made two web sites and "published" them to .Mac. But now when I open iWeb it always behaves as if I am starting a "new" web site; I can't see or edit the ones I already made.
    Why?
    I know they are there, casue I can see them on my iDisk.

    Welcome to the discussions MarkInKyoto.
    You created two sites with iWeb and published them?
    What's the URL for the published sites?
    The iWeb information is stored on your computer in
    the username/Library/Application Support/iWeb
    directory in a Domain file. If you bring up iWeb
    under a different user on that computer OR from a
    different computer, then you won't see the sites you
    created.
    Thanks. I reckon my problem is this: Somehow, inadvertently, I must have created a second "user" and the iWeb stuff I did is under the original "user," to which I do now how to return. I think this happened when I was tried to make my usernames uniform or several different purposes. I wish I knew how to describe what happened! But do you have any advice as to how I can make sure that my computer has one user (me) and one use only? (I am the only who who uses it anyway! This is perhaps compicated by the fact that I would like to be able to edit my web pages using iWeb from both home and offfice computers.

  • PE 13 Does Not Delete Files From SDCARD or Camera When Importing

    I recently updated from PE 12 to PE 13.  Now, when I import pictures, even though I use the option to Verify and Delete files, it never asks and never deletes any files.  I tried changing the setting and changing it back but that doesn't help.
    If you are responding, please don't tell me not ot use this option.  I have been using it since PE 1 and never lost anything.  I know how to recover from any problems that may crop up.  I know many of you don't trust PE and always save the SD card until you have verified the contents of the library and backed it up but that's way too much trouble for me.

    This quote is from MS Outlook 2003 for Windows, Outlook is now available for Mac, I think you have to purchase Offiice though.
    If you don't mind that it may still be available in Outlook for Mac. you would need to check. Sorry about the font, just copied and pasted. Look under POP3 accounts
    http://office.microsoft.com/en-gb/outlook-help/leave-e-mail-messages-on-your-e-m ail-server-HA001150793.aspx
    Quote "
    Remove from server when deleted from 'Deleted Items'     E-mail messages are downloaded to your computer but also remain on the e-mail server indefinitely until you delete the e-mail message in Outlook and empty the Deleted Items folder. Just deleting the message doesn't remove the message from the e-mail server.

  • Find and replace in files does not refresh when changes are made

    Using RH10, I search for a term with the Find and Replace Options pod. I use the Find Results list as a reference only, and open each file from the Topic List. I do this instead of opening the topics from the Find Results tab because I want to see the WYSIWYG changes. Anyway, I make my edits and delete the search term from each topic. Then, to make sure I have done all the work, I run the search again. I expect to see no or at least fewer matches than before, but I still get some or all of the same results as before, even though I double-check the Design and HTML views of the topics and even check the source of a topic separately in Notepad, all indicating that the search term is gone from the topic.
    There is some ridiculous lingering or echo going on. I make sure to select Look in: <Current Project>, and the paths of all the Find Results files are fine. How do you refresh the search so that this echo doesn't occur?
    Also, I close the Find and Replace Options pod, reopen it and start the search again, and the same results are there.
    Message was edited by: DMilkes

    Hi there
    To avoid the message about the file being modified, close all topics in the editor before commencing with any find and replace operations. The message is produced because you have the aforementioned topics open in the editor.
    As you mention "Find and replace in files", I'm guessing you are referring to version 8. I just opened version 8 and performed a find and replace to confirm. There is a button allowing you to clear all.
    On the clicking and dragging to create a link, it's never worked that way. You simply cannot drag from the Topic List pod to do it. But you can from the Project Manager pod. Perhaps you should consider submitting a Wish Form to ask for the ability to click and drag from the Topic List pod to create links.
    As far as rearranging your topics into different folders, as long as you do it from inside RoboHelp you shouldn't be destroying any links. RoboHelp will update references for you as you move things around. The only issue is if you are automatically creating your TOC structure based on the project structure. But usually that's a one time shot. From there forward you just manage things using the TOC editor.
    Hopefully this helps... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • AUTO POPUP OF NOTE CREATION WHEN CHANGES ARE MADE TO CUSTOMER/VENDOR

    Hi,
    When you change Customer/Vendor by VD02/XD02/MK02/XK02 there is the Object Services Toolbox for Object functions next to the title. I'd like the 'Create note' screen to popup as soon as the Vendor or Customer change is being saved. Can you help me?
    Rgrds,
    Gyurka

    Hi,
    When you change Customer/Vendor by VD02/XD02/MK02/XK02 there is the Object Services Toolbox for Object functions next to the title. I'd like the 'Create note' screen to popup as soon as the Vendor or Customer change is being saved. Can you help me?
    Rgrds,
    Gyurka

  • Since iLife '11 upgrade, iWeb does not update/publish my website.

    It shows progress and says it publishes, but when I go to the website after iWeb confirms the site has completed publishing, none of the changes are made. Please help.

    Here's what I've gathered so far....It publishes to the FTP just fine. I can preview the pages from the FTP accurately as a local file. I use the exact same path from the local file to pull up the second page on the site, and it pulls up the old page. BUT, when I use the home page (or index) path to pull it up online, it says "Not Found".
    I gather that for some reason the site is not publishing accurately, as it did before. All the files show up on the remote ftp site, but something is wrong.

  • Deleting mail on pop server does not delete mail on phone

    I have two Andoid phones:
    1. My Personal Samsung Galaxy Note/AT&T
    2. My Employers Motorola Droid RAZR/Verizon
    They are both running Android 4.0.4. I have set up pop mail on both. My personal ISP is X/O and a pop3 account. I typically have it deliver mail to Outlook at my home and turn off Outlook to read mail when away. The first phone correctly reconciles the delete of the mails delivered to Outlook and no longer on the server. The Verizon Droid does not delete the mail from the phone when it is gone from the server. I deleted and readded the pop account and experience the same behavior. How do I get the phone to delete the mail that has been removed from the server?
    Since it is a company phone but a personal e-mail account I am not sure where to get support.

    I found that there was a slight time lapse from when I managed a message on my iPhone (with .Mac) to when it showed the same status on my Mail.app (.Mac). For example, I deleted a message directly from my Inbox (iPhone) and it moved to trash. But it took about 2 minutes for that same message to show up in my trash on my machine. It just sat as a new, unread message on my laptop and then suddenly during the next send/receive interval it was put into the trash (still marked as unread, though).
    Have you allowed any sort of time lapse? Or are you viewing the webmail view of your .Mac account simultaneously as your actions on the iPhone?

  • Deleting OU in OIM does not delete OU in OID

    I have only one Resource that is OID which I am managing from OIM. When I delete a user in OIM from the User Edit Form, it deletes the user from OIM and also from OID.
    But when I delete the OU from OIM, it does not delete the OU from OID. When I delete it from the Process Form of this resource, the OU gets deleted from OID fine, but I want to avoid 2 steps process and delete it directly from the OU Edit Form.
    Will appreciate quick help on this.

    The task is already created for Delete OID OU but that does not execute with(just after) the "Delete" button of OU from OIM. I have to do the two step process of first deleting the OU from OID using "Resource Profile" and "Delete OID OU" Process Task and then come back to the OIM and delet the OU. I am looking for one step "Delete" process for OU from OIM and OID.

  • Deleted email from my iphone it does not delete from Outlook 2007

    My friend has an iphone 3GS and when she deletes email from the phone it does not delete from her Outlook 2007 account. She has to manually delete it.  Outlook2007 is setup to permanantely delete from the server.  Any suggestions?  Thank you.

    Gelz68 wrote:
      Any suggestions? 
    Tell your friend to get an IMAP or Exchange mail account. From what you describe, your friend has a POP account, and that's the way POP accounts work.

  • HT201250 what do I do if my passport for mac does not delete the old files when the disc is full

    What do I do  if the time machine does not delete the oldest files on my passport for mac. I get the message backup failed not enough disc space available

    See Pondini's TM FAQs, for starters.

Maybe you are looking for

  • Getting the row and column number from the caretposition

    Howdy peeps Does anyone know how to find out the Line number and column in a JTextPane by using the caret position (you know like in text editors where it says 100:4 [line number:character position on row]) is there a simple way of doing this in a JT

  • Parameter Transaction

    Hi All, I have created a Parameter transaction for SM30 by which I am able to maintain entries in my user-defined table. But, I would like to restrict the entries displayed (not using the conditions in SM30) by creating the selection screen where onl

  • Safari sometimes goes nuts

    Safari sometimes seems to loose the page formating, especially on the Apple pages, causing the whole page to look like un-formated junk. Is this a Safari bug, or are the Apple Discussion pages going bonkers at times? Once it happens, it seems that th

  • Adobe Reader Security (API)

    Hi, I am looking to put some pdf documents onto our intranet web server. Is it possible to control permissions by disabling or enabling buttons on the toolbar accordingly. Some users will have full access to documents, others read only and if possibl

  • I have lost my itunes library

    My old laptop died on me and i lost everything from itunes library can anyone think of a way to get my itunes library back on my new laptop and my new download of itunes as its all on my iphone. i can recover my purchases but not the thousands of tra