IWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

iWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

There's no reason you can't go on using iWeb for this - with iWeb '08 you have to publish to a local folder (i.e. on your Mac) and then upload the contents of the folder (not the folder itself) to your hosting service: and you have to make sure you enter the new URL in the Publish information or the feed won't work properly; this done, an iWeb podcast should work fine.
Of course there is still the problem that iWeb is not supported and sooner or later a system upgrade may break it. You could look at RapidWeaver: you can make podcasts with that, though the last time I looked into that - which was admittedly some time back - I didn't feel it was ideal for this. There are lots of other podcast creation programs or services around. WordPress is OK but it may be a bit of a steep learning curve: Libsyn is an online service that seems to work reliably. Blogger writes messy feeds but does usually work. Podcast Maker used to work well - I used it myself a few years back - but it rather looks as if it's gone moribund and it may not be reliable with Lion/Mountain Lion, so you would want to check into that.

Similar Messages

HT4946 My sound is not working for Siri, voice mail, Itunes,and ringer tones... the only sound that works is the buzzer. I was told at Verizin to try and update my I tune app off my Home computer and that might make the sound , will this help or is the sp

Sound is not working for Siri, voice mail, ringer tones, movies or music. I was told by verizon that the speaker maybe out, but that i might want to try and reload or update my itunes by plgging into my home computer... will this help and if so how do I do this?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

I can not sync my ipod with my itunes library unless i do a restore. When I begin the restore, I'm told that all my data will be erased. Will I be able to backup my data first, then, after the restore, can I reload my old data?

If I restore my ipod, will it prompt me to backup my existing data? When I begin the restore process, it tells me that all data will be erased. I'm trying to download my library to a different ipod.

It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
Use your backup copy of your computer to put everything on the new one.
It sounds like you have failed to do this, which is not good at all.
You will have to transfer your itunes purchases from your iphone. Authorize your computer for your itunes account
About iTunes Store authorization and deauthorization
Open itunes, plug in iphone, do NOT sync, click File>Transfer Purchases
When you do sync you will lose your pics ( photo library - synced from your old computer), your itunes content ( music, apps, videos,etc) , your contacts and your calendars. So do NOT sync yet. This is why a backup copy is so important.
Enter one unique contact and calendar entry on your computer.
When you first sync, you should get the option to merger the data. Choose it.
If you want your pics, then you will need to e-mail them to yourself before you sync. They will not be of the original quality as they are reduced when synced to iphone.
When all is as goos as it can be, then backup your computer, and always maintain the backup.

I brought an album from the iTunes Store, edited it, and put it onto my iPhone, but the only thing is, is that the featuring artists on the song are not showing, only the album artist, ive tried wipping my phone but no changes still, help me please

Basically I brought a album of the iTunes Store, Depzman - 2 Real, specifically, edited the album features, such as, artists and put the featuring artists, which before I edited it was placed in brackets at the end of the song title like most iTunes songs, but when i put it on my iPhone which is on manually handle music and videos, the artist which i removed from the song title do not appear, only the album artists, I have reset my iPhone completely using the delete all settings and content in the hope of it being the iPhones fault and it has not changed, urgh, what a waste of time / effort, now I have now gotten to the point of fed up cos I feel like I've tried everything, ive re-downloded them and done it all again, still nothing, so now I'm puzzled and don't understand why it wont appear the same on my iPhone as it does in my iTunes library, please can someone help me solve this pain in the ***, I'm OCD when it comes to music and if it doesn't appear the way it should i get annoyed / frustrated -.-
anyway thank you

Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

Triger extract is not working for USERDETAILS object.

Dear MI experts,
I am doing custom client integration. In that we have faced a problem.
Trigger extract is not working for USERDETAILS object in SWCV SAP BASIS 7.10.
1. I have assign the SWCV SAP BASIS 7.10, user define SWCV to device.
2. I have checked the SMQR all queues(extract queues) are in register mode.
But if I delete the users and reassign the same user, then it is sending deletes and insert to the outbound queue.
please help to resolve the issue.
Regards
lakshman balangu

Dear ananth,
Thanks for ur replay.
Actually as soon as the device is registered, automatically the USERDETAILS and USER_AUTHORIZATION Objects should
go to the Outbound queue from the pending extract
I have tried what you have suggested.
1.I have taken device which is in initial state and I have assigned the 'user' and 'user define SWCV'.
2.I have register the devices with my custom client. After that also SWCV SAP BASICS 7.10 not become operational and automatic extract not happend for USERDETAILS.
my doubt is, any thing i need to send from client to make SWCV SAP BASICS 7.10 operational?
(or) is it problem with system?
Regards
lakshman balanagu

When i type the wesite in the address bar and hit ENTER, it seems to be not working for me; anybody knows how to resolve this issue?

When i type the wesite in the address bar and hit ENTER, it seems to be not working for me; anybody knows how to resolve this issue? i have to click on the green arrow button to continue.

Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

DACP commands are not working on Ipv6 enabled Airplay ITune service on MAC book.

DACP commands are not working on Ipv6 enabled Airplay ITune service on MAC book.
As we have gone through the source code(Airplay
Audio POSIX receiver v190.9.p6) in dnssd_clientshim.c file and in API DNSServiceGetAddrInfoResponse has provided the implementation for ipv4 only.
The test setup to test the DACP over IPV6 is by disabling the IPV4
from MAC book and only enabling the Ipv6 .
We are not sure if the test procedure is correct, please clarify the same.

Hi,
It is because of the license. In WS-C3750X-48P-L, you have a LANBASE license whereas in WS-C3750X-24P-S you have an IPSERVICES license.
FDR_SW#show version
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(55)SE5, RELEASE SOFTWARE (fc1)
License Level: lanbase
License Type: Permanent
Next reload license Level: lanbase
In a LANBASE license, ip routing and ip multicast commands are not supported.
Hope this helps.
Thanks,
Arun

CALLER ID not working for International incoming calls

Hi,
I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
Any clue?

yashshankar wrote:
Hi
I recently purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
Regards
Yash
You didn't mention what country your Online Number is in. Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages. If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way. Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page. You'll see a screen that would include your current Caller ID settings, and a link to change that. If your Online Number is from one of those countries I referenced above, just select it and you're done.
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

Auto resolve not working for cached outlook

We recently migrated from Exchange 2007 to 2010. One thing we have noticed is that auto resolve (to alias name) is not working for Outlook in cached mode. Not in cached mode or via owa, it seems to work fine.

Hi,
Does the issue happen to all users or some specific users?
Please check whether the issue happens in Outlook Online mode. If the issue only happens in Cached mode but not in Outlook Online mode, please create a new Outlook profile to have a try.
If it doesn't work, please restart Microsoft Exchange File Distribution service in Exchange 2010 and Exchange 2007 then click Send/Receive > Send/Receive groups > Download Address Book to have a try.
Regards,
Winnie Liang
TechNet Community Support

Wifi is not working for me but woking for everyonne else in my house

Hi my wifi on my ipod5 is not working I am the only one it is not working for.. also I turned off my imessage because I noticed it was taking a very long time to send the message and it made me sign in like normal and i was not able to sign in because i didn't have wifi. PLEASE HELP!!!

open settings, wifi and find the network name. Does it connect? Does it prompt for a password? What happens?

Incoming Email not working for one web app, but IS working for others in same farm.

I have enabled incoming email in a large multi-web application farm running SharePoint 2013 SP1 and the Feb 2015/March 2015 CUs that were pushed down in Windows Updates. It works just fine for two web applications, but it will not work for one particular
web application. I see the email land in the /drop folder. If I remove the email address from the library in http://nonworkingapp web
application and use it on a library in a http://working web application, then the email is processed successfully. Conversely,
if I take an address from a library in http://working and move it to a library inhttp://nonworkingapp it
does not work. I've tried multiple site collections on http://nonworkingapp. This rules out any SMTP issues, etc. and means
the issue is bound to this web application. Permissions are the same between the "non-working" and "working" locations: domain users are members on the site, and the library inherits permissions from the site. The App Pool and Timer
Service accounts have rights to the folder and to the library.
The error in the ULS log is the typical error processing message, but it gives no additional information even though I have enabled Verbose logging.
The Incoming E-Mail service has completed a batch. The elapsed time was 00:00: 00.0156294. The service processed 2 message(s) in total. Errors occurred processing 2 message(s): Message ID: Message
ID:
Typically, you see "alias not found" or some permissions or quota issue here, but this issue is NOT the same as those. In this case NO additional information is provided in ULS.
Edit: running stsadm.exe -o refreshdms -url http://one/failing/site fixed some similar issues where "Unknown alias" was
reported even though the list did have an alias (see here:http://blogs.technet.com/b/vinitt/archive/2009/07/15/e-mail-enabled-list-alias-information-is-not-synchronized-between-configuration-database-and-content-database.aspx).
This did not fix the issue for the case mentioned above.
What could possibly be the issue preventing incoming email from working on this one web application?

Thanks for your reply. Incoming E-Mail was running on all 3 WFE, however I do not think this was the cause. As noted, _other_ emails send to http://workingapp are working just fine. I can send two emails - one to a library on http://workingapp
and another on http://notworkingapp. The email to http://notworkingapp will sit in the drop folder, while the one to http://workingapp will be processed correctly. In addition, the ULS log on WFE1 indicates an attempt to process the file fails.
So clearly, the timer job on WFE1 is running and attempting to process the file. For kicks, I disabled the service on WFE2 and WFE3, but with no change in the behavior.
WRT to #1, I have done this already (as noted in the original post). I can remove an alias from http://workingapp and place it on http://nonworkingapp and it is not processed. If I return it to http://workingapp it is processed. In other
words, I go into Library Settings -> Incoming Email for a working library, and copy the alias, then disable incoming email for that library. I then go to Library Settings -> Incoming Email for a non-working library, enable incoming email, and paste
the alias. Once done, emails sent to the alias are not processed. I then do the reverse, and it works again.
On #2, I have already tried multiple libraries on http://nonworkingapp (also as noted in the original post).
In my environment, incoming email does not work for any library on http://nonworkingapp, but does work for any library on http://workingapp. Troubleshooting listed above has ruled out any problem with basic mail server configuration or library settings
- the problem is bound to http://nonworkingapp
I'm not sure what you mean by "steps to reproduce the issue". If I knew that, I would probably be able to solve the issue. The best I could come up with to describe the situation would be:
Set up SP 2010 in a three-node configuration with multiple web apps
Enable incoming email and confirm it works
Migrate to a SP2013 SP1 farm in a three node configuration.
Enable a new email alias for a library
Observe that it doesn't work for one web application.
Obviously, it's pretty unlikely that attempting that in a lab would actually have the same result.

Imessage is not working for one person

My imessage is not working for one person.
Its been like this for about 2 days
I have an iphone 5
imessage is on
both phones reset network settings,deleted and remade contact, etc.

Does the other person have iMessage on, too? Is the specific phone number/address you are trying to reach them at show up for them in Settings > Messages > Send & Receive?

Out of office replies in Exchange 2013 not working for external recipients

Hi,
Few days ago a couple of company workers went to vacation. They set up OOF automatic replies in OWA 2013. However automatic replies are not working for external recipients (outside of company). Internal users (company users) receive OOF notification.
I'm using smart host in sender connector configuration (SMTP server of internet provider) to deliver emails. Any clues about this problem ? Please find below part of the transaction log. For testing purposes i set up administrator account
to be on vacation.
HARED... SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
RECEIVE SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
DROP     ROUTING
[email protected]
{[email protected]}             Automatic reply: vacation test
AGENT... AGENT    [email protected]
{[email protected]}             Automatic reply: vacation test
HARED... SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
RECEIVE SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
AGENT... AGENT    [email protected]
{[email protected]}             Automatic reply: vacation test
TRANSFER ROUTING [email protected]
{[email protected]}             Automatic reply: vacation test
FAIL     SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test

Hi Informus,
Please check if it is allowed in AllowedOOFType of the Remote Domain *
In Exchange 2013, the only way to see or change the current configuration for automatic replying and forwarding to the Internet is via the Exchange Management Shell (EMS) with PowerShell commands.
To get the currently configured Remote Domains, use:
Get-RemoteDomain
Name                           DomainName
AllowedOOFType
Default                        *
External
Get-RemoteDomain Default | fl AllowedOOFType, AutoReplyEnabled, AutoForwardEnabled
AllowedOOFType     : External
AutoReplyEnabled   : False
AutoForwardEnabled : False
To change the settings, use the Set-RemoteDomain command.
Enable automatic replies
Set-RemoteDomain -AutoReplyEnabled $true
Enable automatic forwards
Set-RemoteDomain –AutoForwardEnabled $true
Enable OOF for Outlook 2003 and previous (for Exchange 2007 and 2010 support)
Set-RemoteDomain –AllowedOOFType $ExternalLegacy
To change all these properties at once, you can use:
Set-RemoteDomain Default -AutoReplyEnabled $true –AutoForwardEnabled $true –AllowedOOFType $ExternalLegacy
Note:
Valid settings for the AllowedOOFType property are:
External
This is the default and only allows for the new style OOF messages as introduced in Outlook 2007.
ExternalLegacy
This settings allows for both the new style and old style OOF messages and needs to be set if you want to enable external OOF support for Outlook 2003 as well.
None
This setting doesn’t allow for the use of OOF messages at all (both internal and external).
InternalLegacy
This setting only allows for internal OOF messages to be sent for all Outlook versions.
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

My icloud mail has not worked for 2 days. the tech support people say they dont even know there is a problem.

My mail has not worked for two days - in the US. The tech support people on the phone claim they don't even know there is a proplem. Anyone know whats going on?

http://www.apple.com/support/icloud/systemstatus/
People reading this forum are just other users like you (who frankly already know there are a lot of frustrated users out there and cannot tell you anything you won't see in the above link). Send your feedback to http://www.apple.com/feedback/icloud.html

IWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

Similar Messages

Maybe you are looking for