IWeb not publishing edited "top" and "bottom" page backgrounds

I have edited the page background for the "Layered Paper" theme to fit an 800px space (up from 700px). The backgrounds display correctly in iWeb, but in Safari, only the middle image is the correct 800px format. The top and bottom both display the old 700px image as a "tile."
I have emptied Safari's cache and deleted the original 700px images from the iWeb theme folder. This also occurs under IE8. Any ideas?
site: carl.stoneh.am

Yes. I edited those files directly (after backing up the originals in case something went wrong).
I did discover a tutorial online that suggested just dragging the "new" header footer into iWeb, so I tried that out. If you visit the "CV" age, you'll see that the header works just fine (I left the footer alone for testing purposes). I guess that will do as a stopgap, but I'm still curious as to why iWeb used the correct image file in the program but published it to MobileMe using a 700px width. Is this perhaps something that's just hard-coded in the program, and changing the width of a page doesn't "correctly" publish larger images for the header and footer (unless they're just gradients, etc)?

Similar Messages

HP PSC 1610xl All in One - when printing it seems to not print the top and bottom of document on eac

Ex: when I print out a mailing label, the top and the bottom of the label are either faded out or non existent.
Please advise.
Thank you.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Shift not working with top and bottom rows of keys

I have an odd thing happening with my Macbook. I tried making a new account, but that didn't fix it. The problem is that when typing, the top rows of keys QWERTYUIOP and the bottom row of letters ZXCVBNM don't type anything when you combine them with the shift key. I'm not sure what happened to cause this or what to do to troubleshoot it. Any ideas would be appreciated.

Any time that you force Windows to stop instead of letting it shut down normally (sometimes you have to shut it off), you may have lost clusters of data that interfere with the proper operation of Windows. So I suggest you start up and run scandisk and make sure you check the box for fixing problems. The other box doesn't need to be checked unless you suspect bad sectors on the hard drive and it takes a long time so I recommend only checking the one box for finding and fixing errors.
Let us know if this worked and the problem is fixed.
Good luck.

MimeMessage top and bottom boundaries

I am writing a MimeMessage to an outputstream using the writeTo method. The outputstream is being sent over an HTTP connection. I am building a RosettaNet webservice. The problem is, my Mime messages look different than my trading partners. Their messages have a matching boundary on the top and bottom. Examples pasted below. The Boundaries marked in bold are the lines I want, but can't seem to get it to happen. Any suggestions?
THEIRS:
--314088.1142286539000.JavaMail.b2badm@boat
Message-ID: <27425331.1142286539000.JavaMail.b2badm@boat>
Mime-Version: 1.0
Content-Type: multipart/related; type="application/xml";
     boundary="----=_Part_4_4718331.1142286539000"
------=_Part_4_4718331.1142286539000
Content-Type: Application/XML
Content-Transfer-Encoding: quoted-printable
Content-Location: RN-Preamble
Content-ID: <5074091.1142286539000.JavaMail.b2badm@boat>
[xml document]
------=_Part_4_4718331.1142286539000
Content-Type: Application/XML
Content-Transfer-Encoding: quoted-printable
Content-Location: RN-Delivery-Header
Content-ID: <18447056.1142286539000.JavaMail.b2badm@boat>
[xml document]
------=_Part_4_4718331.1142286539000
Content-Type: Application/XML
Content-Transfer-Encoding: quoted-printable
Content-Location: RN-Service-Header
Content-ID: <30288319.1142286539000.JavaMail.b2badm@boat>
[xml document]
------=_Part_4_4718331.1142286539000
Content-Type: Application/XML
Content-Transfer-Encoding: quoted-printable
Content-Location: RN-Service-Content
Content-ID: <1501615.1142286539000.JavaMail.b2badm@boat>
[xml document]
------=_Part_4_4718331.1142286539000--
--314088.1142286539000.JavaMail.b2badm@boat--
MINE:
Message-ID: <27425331.1142286539000.JavaMail.b2badm@boat>
Mime-Version: 1.0
Content-Type: multipart/related; type="application/xml";
     boundary="----=_Part_4_4718331.1142286539000"
------=_Part_4_4718331.1142286539000
Content-Type: Application/XML
Content-Transfer-Encoding: quoted-printable
Content-Location: RN-Preamble
Content-ID: <5074091.1142286539000.JavaMail.b2badm@boat>
[xml document]
------=_Part_4_4718331.1142286539000
Content-Type: Application/XML
Content-Transfer-Encoding: quoted-printable
Content-Location: RN-Delivery-Header
Content-ID: <18447056.1142286539000.JavaMail.b2badm@boat>
[xml document]
------=_Part_4_4718331.1142286539000
Content-Type: Application/XML
Content-Transfer-Encoding: quoted-printable
Content-Location: RN-Service-Header
Content-ID: <30288319.1142286539000.JavaMail.b2badm@boat>
[xml document]
------=_Part_4_4718331.1142286539000
Content-Type: Application/XML
Content-Transfer-Encoding: quoted-printable
Content-Location: RN-Service-Content
Content-ID: <1501615.1142286539000.JavaMail.b2badm@boat>
[xml document]
------=_Part_4_4718331.1142286539000--

I'm sorry if that wasn't clear. I am using JavaMail. I add BodyPart objects of type Application/XML to a MimeMultipart object. I set the multipart on the MimeMessage. Then I use use MimeMessage.writeTo(outputstream) method to send the message to my trading partner. Their system is rejecting the message. The theory at the moment is because the message does not have these top and bottom boundaries. The weird thing is, my code can read the messages just fine. I'm using JavaMail to read it aswell. Maybe there is a property I need to set? Or maybe since I'm not sending it over SMTP, do I need to subclass Transport?

TS3899 I am unable to access my mail account. I press the mail icon, the page refreshes to the mail format page - blue bar top and bottom, white text space in the middle.... and that is as far as it goes. It does not list my email accounts or offer any.

I am unable to access my mail account on my iphone, which I have been able to do previously. I press the mail icon, the page refreshes to the mail format page - blue bar top and bottom, white text space in the middle.... and that is as far as it goes. It does not list my email accounts or offer any.

Close the mail app, double tap the home button and completely close out of the app.
then do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

Why when almost completed editing a video on imovie have half the clips developed narrow screen aspect exhibiting grey band top and bottom of each clip?

Why when almost completed editing a video on imovie, have almost half the clips developed narrow aspect - the rest is still widescreen? The faulty clips have developed grey bands top and bottom.

Tried to duplicate the situation.
Most probably I got it wrong but when adding in
• a photo in 16x9 then I get a black letterbox-ing
• an 16x9 video taken from a small compact digital Camera and in wrong frames per seconds (30fps) in a PAL (25fps) project - I get this gray banding too. Strange
May be it has to do with matching different fps in same project - never liked to do that as quality usually suffers and it goes jumpy.
I use JES_Deinterlacer to get all my material into the same standard first - not letting iMovie or iDVD do that conversion as that gives ME BAD RESULT.
Someone with clear knowledge on this - Please feel free to fill in and correct.
Yours Bengt W

Hi, Just switched from CS6 to PS CC. I am used to using ACR in CS6 with it's preview checkbox in the upper right-hand corner. I do not see that checkbox in PS CC. I see that they have added side-by-side, right and left and top and bottom before and after

Hi,
Just switched from CS6 to PS CC. I am very comfortable using ACR in previous versions. I liked to use the preview checkbox located in the upper right-hand corner to see before and afters. That checkbox is no longer in my version of PS CC. I see that they have side-by-side, top and bottom and right and left before and after options in the lower right-hand corner in this version. Is there anyway to get that legacy preview checkbox back so that I can use it?

Hi Warunicorn,
Thank you very much. I just could not find it on my own. I will have more questions as I get into it.
Jim

Button Top and Bottom - one displays other not

I created a report region and added a button to it:
Create a button in a region position
Button name: SUBMIT
Label: Submit
Button Type: Image
Image Name: #COMPANY_IMAGES#lisa.gif
Position: Top and Bottom of region
Then I viewed the page - the top image displays correctly, but the bottom one doesn't. So viewing page source I saw, that Top image src attribute is
wwv_flow_file_mgr.get_file?p_security_group_id=505603948315924&p_fname=lisa.gif
whereas the Bottom image had src of
/i/wwv_flow_file_mgr.get_file?p_security_group_id=505603948315924&p_fname=lisa.gif
Looks like a bug to me :-/
I'll create two buttons now (one for top and other for bottom button), no worries, but I thought you should know.

Kaja,
Yes it's a bug. Thanks for letting us know.
Scott

What are the boxes that appear when I scroll over them at the top and bottom of a Pages document, and how do I get rid of them?

While types a blank document on pages, there are "invisible" boxes at the top and bottom of each page, and they only appear when I scroll over them. Does anyone know what these boxes are, and how i can get rid of them from my paper?

Those are the Header and Footer spaces. You remove them using the Document Inspector. Uncheck the "Headers" and "Footers" checkboxes shown checked here:
Regards,
Barry

HT204088 Using my ipad 3, with ios6, I can access the itunes store and the App store when I press the icons, but the viewing pages are blank. I can see the toolbars at the top and bottom. The pages are blank for every tab. Help. The ipad works fine, other

Using my ipad 3, with ios 6.0, I can access the itunes store and app store by pressing the icons, but the screens are all blank pages, I have tool bars at the top and bottom of the viewing screen, but when I touch the individual tabs, the viewing screen is either white or dark grey...nothing else appears. Help.

Having the same issue, can someone please enlighten us?

I have an 11" Macbook Air. When I use Garageband it opens in a window so large that the bottom corner is not accessible so I can't decrease the window so that I can see the top and bottom of the window at the same time. Any suggestions?

When I use Garageband the window is so large that I can't reach the bottom corner to decrease the window to fit inside the display so that I can see the top and bottom of the window at the same time.
Any suggestions?

You can reduce the window by grabbing any edge or corner. You don't have to use the bottom right anymore.
You could also temporarily move the dock to the left/right so you can reach the bottom.

TS3989 Since I unloaded os7 and started using I cloud, the photos taken are smaller. when you look through the viewer of the I phone, I have lines top and bottom. In short, the pictured I'm now taking are smaller with not as much content. Any one have any

Since I unloaded OS7 and started using I cloud, the photos taken are smaller. The picture doesn't take up the whole viewer of the I phone. Therfe is a line,top and bottom. Any suggestions?

Hi shldr2thewheel,
it has been a while since we have last spoke, I would like to let you know, I am still working on getting used to the switch from windows to a Mac/Apple system. I do have a new question for you, I did purchase In Design CS5.5 through journeyed.com through Cuyahoga Community College of which I attend as a student, is there a way to purchase an online book through iTunes to learn that as well? Also, you know me, the struggling student, I would also, when and if the book can be purchased through the iTunes, would need to know if you do know of a much easier book for struggling students like myself and at a reasonable price as well for the In Design CS5.5 program. Our campus bookstore had closed early, and, so did the colleges library and our local library here where I do live, so, I cannot go to either place to purchase a book or to take out a book, plus cash funds are low at this moment as well but, I do have money left on the iTunes account to use, if it can be used. So, can it be used, the iTunes money, towards finding a low priced online book? I am in great need of assistance as I have a project due for my one course for this Tuesday, September 4, 2012.
Sincerely in need of help once again,
Kim

Preview pdf shows different borders/ top and bottom

in iphoto, made a book, the preview pdf is not matching the book created, in a way that some top and bottom borders are NOT bleeding off the page, however in the iphoto book layout the entire photo is bleeding off the page. any ideas on pdf? I'm wondering if the pdf is showing the trim and bleed crops.

Hi,
Thanks for the advice. Here's the latest with my 'black borders top and bottom in iMovies' problem:
I found out that if I converted the .VOB files into .DV files (using MPEG Streamclip) instead of converting them to Quicktime files, then when I import these .DV files into iMovies the black borders are no longer there. So it seems like the problem was something to do with Quicktime files in iMovies.
But then there was another problem:
After waiting quite a while for MPEG Streamclip to finish it's work of converting the .VOB files into .DV files, and then waiting a bit longer to import the .DV files into iMovies, I was ready to work on editing the clips. But whenever I added either a fade in or fade out to a clip, I saw that during the time of the fade in or out, the picture was all distorted with thin vertical lines running through the entire picture.
So I had to do more trouble shooting:
I went back to MPEG Streamclip to have a little play around in there. When I made the .DV files before I used the compressor setting DVC Pro 50, so I changed this to the DVC Pro 25. I made a short .DV clip using this compressor and tried it out in iMovies and there was no problem with the vertical line distortion. Just to make sure I made another small .DV clip using DVC Pro 50 as before, imported that into iMovies and again, during the fade in/out effects this distortion came back again. So it seems like I sorted that problem out too.
Ian.

Firefox upon opening an image in a new tab, centers the image from top and bottom and surrounds the image with a grey frame. Just started having the problem today, searched Google to no avail.

Firefox upon opening an image in a new tab, centers the image from top and bottom and surrounds the image with a grey frame. Just started having the problem today, searched Google to no avail.

Oh wow, looks like a new feature.
The "page" links in a stylesheet with the address "resource://gre/res/TopLevelImageDocument.css". If you remove that reference, then the image displays in the old style.
'''''Edit: Please skip the rest of this post and check out the next one.'''''
There might be a more elegant solution than that, but you could use a bookmarklet to strip out that link when you want to view the page in its old style. A bookmarklet is a snippet of JavaScript you save on the Bookmarks toolbar for quick access.
First, copy the following code to the clipboard (it's all one long line):
<br>javascript:var ssheet=document.querySelector('link[href="resource://gre/res/TopLevelImageDocument.css"]'); if(ssheet)ssheet.parentNode.removeChild(ssheet); void 0;
Next, if you are not displaying the Bookmarks Toolbar, use View > Toolbars > Bookmarks Toolbar to display it. (If you aren't using the classic Menu bar, press Alt+v to call up the old View menu. Right-clicking the gray area just below the page address also allows you to display the Bookmarks Toolbar.)
Right-click on the Bookmarks Toolbar (or Mac equivalent of right-click!) and choose New Bookmark.
Paste the code into the Location box (the second box).
Then type a useful name in the Name box (e.g., Oldstyle Picture) and click Add.
Now, when you want to tweak the image display, click the button to run the script.
Manual clicking is a hassle, so it might make sense to look into other solutions. (Greasemonkey didn't seem to work; I think it might not run on .jpg files.)

Centering flash movie top and bottom in dreamweaver?

Hi all, I'm a novice user of dreamweaver.
I've placed a flash movie in dreamweaver and centered it left
and right but how can I center it top and bottom so it
floats?

Not too sure what you mean exactly by "so it floats." But
I'll hazard a
guess that you want your video to appear inside a
semi-transparent lightbox
that appears to float over the page content beneath it. If
so, have a look
at FloatBox.
http://randomous.com/tools/floatbox/
Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
www.twitter.com/altweb
www.alt-web.blogspot.com/

IWeb not publishing edited "top" and "bottom" page backgrounds

Similar Messages

Maybe you are looking for