J1IEX, error while posting Excise Invoice

Dera Gurus,
While posting the excise invoice for the invoice which has already been captured at the time of MIGO, I am getting the error message " All Part I entries have been canceled for excise invoice 5810 2009"
I have checked the PO history and found that the GR has also not been canceled and moreover the entries are being posted in RG23A Part 1 table. The movemet type 101 has also been maintained for the updation of RG23A part 1
The only thing that I have found suspicious is while displaying the Excise invoice is that Quantity available for CENVAT credit is Zero. I think this field needs to populated. How does this this field gets populated.
Regards
Prabhjot Singh
Edited by: Prabhjot Singh Nayyar on Jun 15, 2009 10:11 AM

Dear All,
I have already checked the table for the Part 1 entry, the Part 1 register is getting updated but it is now allowing me to post the Excise Invoice. As soon as I try to post the Excise Invoice, it gives me the error message " All Part I entries have been canceled for excise invoice 5810 2008 "
Regards
Prabhjot Singh

Similar Messages

Error while posting Excise Invoice

Hi Experts,
I have captured incoming excise invoice for an Import PO of Asset material.
GR has been made.
Also partial payment to vendor has been done through MIRO.
During check it do not show any ERROR message
While posting Excise invoice , error message is displayed "ACCOUNTING DOCUMENTS NOT GENERATED"
and immediately current session is closed
How to solve the problem?
Regards
Jai

Hi,
Import cycle :-
1. MIRO-Bill of Entry
2. Excise Invoice capture
3. Goods Receipt
4. Excise Invoice posting
5. MIRO -Vendor settelement
Tcode you used for capturing excise invoice - j1iex
posting the excise invoice. j1iex
Thanks
jai

CIN - Error while posting excise sales invoice in J1IIN

Dear All,
Getting below error while posting excise invoice for factory Sales.
"No account is specified in item 0000000001"
Please guide where to maintain GL
Regards,
Rakesh

Hi,
Import cycle :-
1. MIRO-Bill of Entry
2. Excise Invoice capture
3. Goods Receipt
4. Excise Invoice posting
5. MIRO -Vendor settelement
Tcode you used for capturing excise invoice - j1iex
posting the excise invoice. j1iex
Thanks
jai

Assign CO object error while cancelling excise invoice

Dear Gurus,
I am getting following error, while cancelling excise invoice. I was able to post the excise documents without this error.
Account N870 requires an assignment to CO object. Message no.KI235
Kindly help me to resolve this issue.
Regards
Ranga

If you click on the long text of your error message, you will see an explanation of how to fix the error there.
Or just put an entry into table OKB9 for the GL Account N870

Error while creating Excise Invoice

Hi All,
Can any one help me on CIN?
I am getting one error while creating "Excise Invoice [T.code J1ILN]" i.e. "System failure during locking GL account Cocode by 13113910"
Regards
Chowdary

Dear Raghavendra
Please make a try with the following but I am not sure whether it will solve your problem.
Go to FS00, give the G/L account which has the problem and select "Control Data" tab. Here punch as asterisk in the field "Tax category" and save.
Now try to create the excise invoice.
Thanks
G. Lakshmipathi

8I 681 Error While Creating Excise Invoice

Dear All,
Am getting error 8I 681 error while creating excise invoice,when i analysed since in the document flow the delivery document is not there, only J delivery will be allowed in creating excise invoice.
Our client wants item level milestone,so in oder to activate that i have assigned the billing plan in the item category.But when i assighn the billing plan the system will not allow to put the billing relavance delivery relavant.So i made oder relavan in the billing relavance.So i create an oder and with that reference delivery.But when i create billing i have to refer the oder number,since in the item ctegory i have made oder relavant billing.So the result is in the billing document flow the delivery document is not flowing.Henceforth i could not be able to create J1IN.
But this was not happening in the sand box,but only in the quality since it is superior.when we debugged we found only J(Delivery) is allowed to create excise invoice.
Please help me to solve this issue,is there any possiblity to make the delivery document flow in the billing document.If it is done it 100%possible to create the excise invoice.
Please share your ideas to solve this issue.....
Best Regards,
Venugopal

Dear Lakshmi,
Thanks for your Prompt reply...
In our case delivery is there,but when we create the invoice the delivery document is not flowing,since in the itemcategory oder relavant billing.We have billing milestone at the item level,for activating that i have to make the billing relavance as I.Other wise the system is not allowing me to select delivery relavant and billing plan.Please help me to make the delivery document flow in the billing document.Then this 8I error will be solved.
I have alsochecked the update document flow,everything is perfect.
Regards,
Venugopal

Cess not calculating while posting excise invoice

Hi,
while posting excise invoice cess(2% & 1 %) is not calculating on BED account.
pls tell what r the settings required to calculate cess on BED while posting.
Regards
Sunil

Hi
Ensure that you have maintained the excise defaults for Ecsess( Against ECS AP) and Shecess condition type( AP AT1 Cond) in
SPRO-Logisitcs general-Taxes on goods movement- India -Basic settings- Determination of Excise Duty- Maintain Excise defaults
Also check in PO the ECS and SHEcess values are non Zeroes
Regards
Sandeep
Edited by: sandeep13 on Nov 25, 2009 9:45 AM

Error while posting vendor invoice in F-43

Hi experts,
while posting vendor invoice with Tax code , i am getting the following error:
Posting is only possible with a zero balance; correct document
Message no. F5060
Here tax line item is not yet all displaying in simulation.
If I posted with tax code with ZERO percentage it is posting correctly.
where as same transaction I am able to post through transaction code FB60.
What could be the reason?
regs,
ramesh b

Hi
Please check and correct the respective line items , because your selecting incorrect GL account with respective posting keys
Example : You have exp gl a/c at first line items against vendor invoice posting's, normaly this vendor will post in first line item with posting key is 31 with vendor a/c and second line item 40 with exp GL a/c and same you will check any required inputs have missed out from this transactions.
Regards
CHOWDARY

Error while Posting Excise JV

Hi,
While Posting Excise JV through J1IH,J2IUN, transaction code we are getting following error
"Error in FI Document create"
Thanks in advance
Samir Joshi

Check the posting date whether it is open or not....then also check note 1434628
Regards,
Indranil

Error while making excise invoice

Hi
When i post excise invoice then i receive error
No matching record found 'G/L accounts'(OACT)(ODBC-2028)
i have given accounts to all excise formulas ie A/ptax account and A/Rtax account of BED,Cess and Vat.
how to solve?
Thanks

Hi Krishna,
Actually this the incoming and outgoing cenvat clearing account is a offset account. You will have the balance in these accounts nullified when you create an Invoice.
Like..
for an out going excise invoice the clearing account is debited by the total tax amount(Excise) and when you create the AP Invoice the account is credited by the same amount. so the baance at the end is 0.
the same is reversed for incoming excise transactions.
So you can create twoo accounts one in the asset drawer and one in liability in correspondence to the tax accounts for Excise(BED,cess,H.Edu cess).
I hope I am clear.
Regards,
Raj

Error while saving Excise Invoice in J1IIN Transaction.

Hi All,
While saving Excise Invoice in J1IIN Transaction, am getting the following errors.
1.Balance in Transaction Currency.
2.System failure during locking G/L account 7000 by 61110.
Pls provide me the solution.
Regards,
Sasi.

Hi SASIKANTH,
Go thru the below issues, hope would be helpful.
1. Balance in Transaction Currency
Balance in transaction currency
Re: Balance in Transaction Currency
2.System failure during locking G/L account 7000 by 61110
System failure during locking GLaccount (the Company Code) by (GLaccount no
System failure during locking GL 401000
System failure during locking GLaccount 1000 by 43000130
Thanks,
Swamy H P

Error while creating excise invoice cancellation thru J1IS(J1IEX Invoice)

Dear All,
While creating cancel of purchase excise invoice with reference to J1IEX Internal Invoice No. system is throwing a error
"Error updating table J_1IEXCHDR"
Message no. 8I308
Suggest me asap,.
Thanks & Regards,
Radhika

Hi Radha,
Check the ETT Table (Excise accounts assignment table) in the config have assigned the relevant gl accounts for TType - CEIV Update all the gl accounts in the table.
Verify the node--> Specify Excise Accounts per Excise Transaction --- debit and credit account names to the TType -- CEIV
Credit -- CENVAT Suspence
Cr         RG23 AT1
Cr         RG23 BED,RG 23 ECS,
Dr         CENVAT Clearing
Dr         PLA BED, PLA AED, PLA SED
Dr         RG23 AED, BED, SED
Same should be assigned for Sub-Transaction Type '01' for CEIV Type.
Thanks,
padmaja

Error in Posting Excise Invoice - Accounting document not generated !

Hi,
We have done the GR using MIGO-Only Part I, captured in the Excise Invoice using J1IEX and these two transactions are OK.
While we are trying to post the Excise Invoice, the system is displaying the following error:
Accounting document not generated!
Message no. 4F186
Please guide.
Please note that we are running the transaction in the Pre-production server for the very first time.
Also would like to know what all reports I should run related with Excise. Someone told me that I should run the T Code J1I5 & J2I5 to update the RG23 register the next day of the transaction the entry related with excise is not updated on the same day. I think the updation of register should be automatic
Regards,

Hi,
I am repeating my Process/Question:
We have Created a Purchase Order with Tax Code (JMOP) related with Excise (Cenvatable).
We did the Goods Receipt (MIGO-> Only Part 1)
We did the Capture Invoice (J1IEX).
Till here every thing is OK.
While Posting the Excise Invoice (J1IEX), the system is giving the follwoing error:
Accounting document not generated!
Message no. 4F186
On Simulation window, the System is displaying the following CENVAT Posting:
24820020           Dr.      1,058.00
24820000           Dr.      105,840.00
24820010           Dr.      2,117.00
13113920           Dr.     109,015.00
But when we click on the Post CENVAT Button, the system is displaying the message "Accounting document not generated !" and exits.
Please guide.
Please note that we are running this Transaction on the Pre-production Server; On the Development Server it is working fine.
Regards,

Error while saving Excise Invoice

Hi,
   I am getting an error while saving an excise invoice. It is as follows :
    BED : Debit = 1,400.00 Credit = 392.00 Diff =1,008.00
    Message no. 8I312
please help....
Thanks & Regards,
S.Rajeswari

Hi,
I am getting the following error while saving the Excise invoice.
Balance in transaction currency
    Message no. F5702
Diagnosis
    A balance has occurred in transaction currency 'INR' with the following
    details:
    Exchange rate '00', amount '            28.00' and currency key 'INR'.
    The data in the transaction currency were transferred from the calling
    application.
System Response
    Your data cannot be processed in FI.
Procedure
    The error is probably in the calling application.
Thanks & Regards,
Ramya

Tax error while posting an invoice in SRM

We are using SRM 5.5 SP4, ECS and ECC 6.0. We are using vertex for tax caluculation and we configured the tax calculation to always occur in ECC.
One more important point is, client has decided to use invoicing in SRM. Now the problem is we ran in to so many tax related issues and we opened OSS messages for this but SAP did not help. Let me explain the problem in detail.
1) We used to get "Tax jurisdiction code could not be determined" error while creating shopping cart, but we implemented note 436760 and hardcoded a value and got rid of that error.
2) When we create a SC, the copy of PO is created in ECC and vertex is called for tax calculation and tax is calculated properly based on the tax hierarchy except when you use the Shipping Address (external), so when I used the delivery address other than plant, it should calculate based on that address but it was not doing that, its calculating based on the cost object's jurisdiction code. For this problem, we have implemented ME_ADDRESS BADI in ECC, but with this BADI, it is always taking delivery address's jurisdiction code, which is also wrong.
The tax jurisdiction determination should be from 1) Delivery address if its different from plant, else it should look in to the cost object, else storage location then plant.
So we implemented the above logic in that BADI and there is no problem with PO taxes.
3) When we create an invoice with reference to PO, the invoice verification program is always determining the tax jurisdiction code from plant even though the taxes on PO are calculated based on cost object, hence the IDOC is erroring out by saying there is a difference in tax.
So we implemented the user exit and used the same logic of tax determination and its fixed now.
4) Finally, we are trying to create invoices without PO's in SRM, here no tax calculation is happending in SRM, but when we try to post the invoice in to ECC, we are getting the following error
"SAX processing failed on input stream#SAX processing failed when attempting to add child element to parent. (parent element=com.vertexinc.tps.common.domain.LineItem, child element=com.vertexinc.tps.x.."
So I am not sure how to fix this, we are at the dead end now out of ideas, so trying to get some help from experts like you about looking at this problem in a different angle. Now there are a couple of questions I can ask you
1) Did we do something wrong by selecting R/3 as the tax calculation system, if not is it difficult to fix this error and move forward?
2) What if we need to change the design and start calculating the taxes in SRM by connecting SRM to Vertex, will there be any new challenges? and do you have any config doc for this? Also we are implementing this rollout for US, Canada and Mexico companies.
I would really appreciate if you can reply me with your valuable input. You can also email me if @ [email protected]
Thanks a lot,
Sreedhar

Hi
It's recommended to have the same Tax related configuration data replicated in SRM system from R/3 as well.
I don't recommeded you to go with Hard-coding of tax codes.
We have faced similar issues with Delivery address and we have to solve it using our custom logic inside the BBP_DOC_CHANGE_BADI and BBP_CREATE_PO_BACK BADIs.
Anyways, send the detailed business requirements to my mail which are already having with you. )
I will definitely help you out.
Please refer to following threads as well.
sales tax gurus
How to display country related tax codes in SRM
e-Invoice tax calculation.
Tax code T1 does not exist for jurisdiction code error in shopping basket
Drill down facility not working for Tax codes ....Urgent!!!!!
Tax Issue
Tax Calculation
Tax setting in Extended Classic Scenario
Withholding Tax in SRM5.0
IDOCS for Tax Information
Taxes in Bid Invitation
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

J1IEX, error while posting Excise Invoice

Similar Messages

Maybe you are looking for