J2EE fails to connect to the ABAP backend system

We have J2EE 640 Sp16 Abap+Java. As we configured this node in high-availability, we applied note Oss 757692 to the J2EE.
Anyway the J2EE does not come up.
Into the std_server0.out we see the following:
  Service dbpool started. (1503 ms).
May 25, 2006 3:44:09 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_25] Fatal: User Management Engine
(com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to connect to the ABAP backend system. Check that connectio
n data are correct and the backend system is available. Error message: "User not authorized (session closed)". Connection data (
obtained from properties of UME service in section "ume.r3.connection.master.": "{
  passwd=********
  receiverid=master
  sysnr=00
  client=100
  poolmaxsize=10
  user=SAPJSF
  receiverid_guest=master
  ashost=sap3
  snc_mode=0
We double checked the set6tings of note 757692 and all of them seems to be correct.
We changed also the psw of SAPJSF in the ABAP stack and also in Global server configuration by mean of the configtool for the ume.r3.connection.master.psswd item
Neverthless we continue to recive this error.
What's wrong ?
Regards

Could it be because you tried to do this in an AS Java + AS ABAP installation? The note 757692 says quite distinctly, "This note covers the procedure for the j2ee engine only!" The statement does not make it clear if this note refers to only a standalone AS Java.
My saying so is not very helpful, but the note also goes on to say, "Should you wish to change the host name of a server in a test !!! !!! system, you should do so only with the assistance of an SAP!!! !!! consultant.!!!

Similar Messages

  • Error while connecting to an OData Feed from Excel 2013 PowerPivot . Error: Failed to connect to the server. Reason: The payload kind 'BinaryValue' of the given data feed is not supported

    I am trying to connect to a Odata Data feed from Excel 2013 Power Pivot
    The datasource is in sharepoint site eg: https://sitename/Shared%20Documents/datafeed.atomsvc
    getting below error
    Error message:
    Failed to connect to the server. Reason: The payload kind 'BinaryValue' of the given data feed is not supported.
    ============================
    Call Stack:
    ============================
       at Microsoft.Data.DataFeedClient.DataFeedODataReader.ValidatePayloadKind(ODataPayloadKind payloadKind, ODataMessageReader odataMessageReader)
       at Microsoft.Data.DataFeedClient.DataFeedODataReader.InterceptODataException(Action action)
       at Microsoft.Data.DataFeedClient.DataFeedODataReader..ctor(IODataResponseMessage responseMessage, Int64 maxReceivedMessageSize)
       at Microsoft.Data.DataFeedClient.DataFeedODataReader.CreateReader(IWebResponse webResponse, Int64 maxReceivedMessageSize, Boolean applySlashUpdatingBaseUriResolver)
       at Microsoft.Data.DataFeedClient.ODataHelper.GetCollectionsFromServiceDocumentUrl(Uri serviceDocumentUrl, DataFeedConnection connection)
       at Microsoft.Data.DataFeedClient.DataFeedConnection.Open()
       at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.InitializeConnectionObject(String connectionIdentifier)
       at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.InitializeConnectionObject(String connectionIdentifier)
       at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.Open(String& connectionIdentifier)
       at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.Open()
       at Microsoft.AnalysisServices.Common.DataSourceBasic.ClickTestConnection(Object progressControl)
    Appreciate suggestions/answers
    NOTE: The error is showing only while using Excel 2013 powerpivot
    its working good with Excel 2010 powerpivot

    Anita,
    Please look into using Power Query to use OData as a source in Power Pivot.
    Thanks!
    Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • PowerPivot Error "Failed to connect to the server. Reason: Unspecified error" when importing other files

    I have been getting the error below on a regular basis when attempting to import Excel, Text, or Access files.
    I'm running Office 2010 (SP1), and PowerPivot (SP1). After reading a similar thread I reinstalled PowerPivot. It worked until I closed Excel. Now it recuses to allow import or update of these files. I really need it to work. Anyone have an solution or even
    something to try - other than uninstalling and reinstalling PowerPiviot everytime I need to import or refresh files?
    Thanks,
    ============================
    Error Message:
    ============================
    Unspecified error
    Failed to connect to the server. Reason: Unspecified error
    ============================
    Call Stack:
    ============================
       at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
       at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
       at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at System.Data.OleDb.OleDbConnection.Open()
       at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.InitializeConnectionObject(String connectionIdentifier)
       at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.InitializeConnectionObject(String connectionIdentifier)
       at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.Open(String& connectionIdentifier)
       at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.Open()
       at Microsoft.AnalysisServices.Common.DataSourceBasic.TestConnection()
       at Microsoft.AnalysisServices.Common.DataSourceBasic.ClickTestConnection(Object progressControl)
    ============================

    Hi San,
    What's the version of your PowerPivot? Please refer to the article to check the version of PowerPivot for Excel:
    http://powerpivot-info.com/post/89-q-how-can-i-check-what-version-of-powerpivot-for-excel-is-installed-on-my-machine
    We can download the latest PowerPivot for Excel version from:
    http://www.microsoft.com/en-us/download/details.aspx?id=29074
    In addition, please help to collect windows events log information to us for further investigation. If you cann't import Excel, TEXT or Access data into PowerPivot data model, you can try to directly copy your data into it.
    Regards,
    Elvis Long
    TechNet Community Support

  • My iphone 5 won't make a call when i fail to connect to the internet via 3g

    My iphone 5 won't call when i fail to connect to the internet via 3g.
    At work i dont have wifi i have 3g, if i launch say the sky go app,or the iplayer, sometimes they work and everything is fine...sometimes they wont load as 3g for whatever reason cant get a connection at that particular time........ if i then try and make a call the call will fail. I've experimented 25 + times and this is definately the cause.
    (note: when the 3g connection does work, the phone has absolutely no problem calling people)
    Anyone had this problem?
    Even better has anyone got a solution?
    Thanks,
    Nick.

    Are you sure that the carrier's signal is strong where you are having this problem? Certain building structures and locations have poor cellular signal strength and this often results in the "No Service" indication. Are other users able to get service in the same locations where you have problems?

  • When replying to an add on Craig's List, for example, it goes back to my old email address I had with IE, and fails to connect with the ad's author and I'd like to know how to make it use my gmail address with Firefox instead.

    When replying to an ad, via email, posted on Craig's List , for example, it attempts to use my old email address I had with IE, then fails to connect with the ad's author. How do I get it to only use my gmail address with Firefox?
    == This happened ==
    Every time Firefox opened

    See https://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

  • "Failed to connect to the service manager" when I try to add nodes to a cluster on Windows Server 2008 R2

    Hello,
    I get the following error message everytime I try to add a node to an existing cluster "Failed to connect to the service manager".
    I'm running Windows Server 2008 R2,
    Any ideas?

    Hi saeedawadx,
    Please run the cluster validation and post the error or warning information, in normal scenario the “Failed to connect to the service manager” issue often caused by the firewall
    or AV soft block the others node connect, please try to disable the firewall and AV soft then try again.
    The following related article will give more helpful tips,
    The case of the server who couldn’t join a cluster – operation returned because the timeout period expired
    http://blogs.technet.com/b/roplatforms/archive/2010/04/28/the-case-of-the-server-who-couldn-t-join-a-cluster-operation-returned-because-the-timeout-period-expired.aspx
    Trouble Connecting to Cluster Nodes? Check WMI!
    http://blogs.msdn.com/b/clustering/archive/2010/11/23/10095621.aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Distribution manager failed to connect to the distribution point

    After upgrading my distribution point to windows server 2012 standard I can't distribute content to my distribution point.
    I see the following error.
    source: SMS Server
    Component: SMS_DISTRIBUTION_MANAGER
    message id 2391
    Distribution Manager failed to connect to the distribution point Check your network and firewall settings.
    The firewall is not enabled. 
    wbemtest is able to connect to the remote server that has the distribution point role installed.
    The network access account is working.
    How do I fix this?

    but why does it most of the time work? I did inplace upgrade at least 6 times from 2008 R2 to 2012 R2 and every DP except one works fine.
    I'm not completely sure, but I think, my faulty one, that I'm trying to get working, was working correctly after the inplace upgrade. But as I said, that is only a theory, I'm just curious if that's possible.
    I have the same issue as described above.
    The IT guys from LukOIL

  • Addon has failed to connect to the DI API. Service Not found

    Hi
    I've upgraded database B1 8.8 SP0 PL11 to B1 8.8 SP0 PL15.
    Addon was complied on B1 8.8. SP0 PL11 envrionment.
    I've error message when I started addon.
    Addon_Name addon has failed to connect to the DI API.
    Error Details:
    Service not found.
    DI API was uninstalled and re installed.
    And I deleted SM_OBS_DLL directory.
    But I can not resolve this issue.
    Please help me,
    Joanne

    Hi Joanne,
    I had exactly the same problem with patch 15 after an upgrade from 8.8 patch 13. The SBO client didn't automatically update so I had to use Add/Remove programs to remove the old client and DI API and then the new client install failed from the B1_SHR folder with a 1158 error (no description).
    What I did to correct it was install the DI API from the <servername>\B1_SHR\B1DIAPI folder and then run the client install afterwards. This time the client install worked fine and I can run addons that use the DI API. I think there was some registry entry issues, maybe with the upgrader or the client installer.
    Kind Regards,
    Owen

  • To find No.of JCO connections in the ABAP stack

    HI gurus!
    How can we find the no of JCO connections in the ABAP stack ! is there any possibilty to find this .........its an urgent and solutions rewarded with points
    regards,
    S.Rajeshkumar

    Hi Rajesh,
    You can not find no. of JCO connection fron ABAP Stack ......you have to login into JAVA Stack.
    <b>
    If useful ,Reward Points .</b>
    Thanks,
    Prashant.

  • SSRS: Failure sending mail: The transport failed to connect to the server.

    I run SSRS and email reports using SMTP service on a Windows Server 2008 R2 box. This has been working for months and stopped today around noon.
    I have checked all SMTP settings and verified they are correct. I can send an email from SQL Server Management Studio, using SMTP service with no trouble.
    Now in SSRS I am getting this message:
    Failure sending mail: The transport failed to connect to the server.
    I have read every link when I google this message or type it into bing.com; yet cannot find a reason why SSRS has suddenly stopped emailing my reports.
    I have restarted the server in question, I have changed account names, I have changed passwords, yet nothing is working.
    I even approached our senior dba about it and he has never seen this happen.
    Has anyone else experienced this issue?
    Thank you,
    Jessica

    Thank you JJordheim.
    IDS is not an issue. Neither is the Windows Firewall on the server. I actually turned it off while troubleshooting to make sure it was not causing the issue.
    SSRS and my SMTP Virtual service are on the same server. I am running the SMTP service through IIS. I even created a new SMTP Service to test with. No luck.
    My rsreportserver.config file looks fine, or at least it does to me. Posted below:
    <Configuration>
     <Dsn>AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAoroltqyZFk6Vi+2kNEmsQAQAAAAiAAAAUgBlAHAAbwBy
    AHQAaQBuAGcAIABTAGUAcgB2AGUAcgAAABBmAAAAAQAAIAAAALMXYz8ommSjoJt2CZCuZmzmS+bo
    5d4pT033TPn7WZoiAAAAAA6AAAAAAgAAIAAAAEmwCgTd0Xo4ssE0WGSo7KC3+nsOZd2sR/PT6hUQ
    5SR44AAAAL4ReAnyjUBENbH63/qM8orgHrcG3s/MyNdjuBnfKhwlqauRfxwcNgjd7PtXLvS8gnBq
    kTji38EuQHBOJ63rklEclaejzkcA45rAbzLqWBi7oftw1SwHahZQvp+zxFdKVuAGnhEjiKvcrgzl
    ebfWNTjY/pjyJ9bwvF7vReIXrRXecPTjbE6wOiYFggY6pVCXvJCRvoUNMiLJC3PCIi58LOqVjPUO
    juyIZUrNqTPZlhswNU0M+mM7W6YRqPtF+xXx1FBSe0PShD+29IgBOYBRFFfDbW93tbnw5nj5/xpk
    I2GlQAAAAJoNASVS7KABbUZke+huE5HzjaXk1o7Sq9REu4Svlry1INKqJfo+dbGDWUAKEwbClVoO
    RNs8QwPFYNIXyq6vDD0=</Dsn>
     <ConnectionType>Default</ConnectionType>
     <LogonUser></LogonUser>
     <LogonDomain></LogonDomain>
     <LogonCred></LogonCred>
     <InstanceId>MSRS10_50.MSSQLSERVER</InstanceId>
     <InstallationID>{e93dd46f-7646-44e2-9997-acc3cb001828}</InstallationID>
     <Add Key="SecureConnectionLevel" Value="0"/>
     <Add Key="CleanupCycleMinutes" Value="10"/>
     <Add Key="MaxActiveReqForOneUser" Value="20"/>
     <Add Key="DatabaseQueryTimeout" Value="120"/>
     <Add Key="RunningRequestsScavengerCycle" Value="60"/>
     <Add Key="RunningRequestsDbCycle" Value="60"/>
     <Add Key="RunningRequestsAge" Value="30"/>
     <Add Key="MaxScheduleWait" Value="5"/>
     <Add Key="DisplayErrorLink" Value="true"/>
     <Add Key="WebServiceUseFileShareStorage" Value="false"/>
     <!--  <Add Key="ProcessTimeout" Value="150" /> -->
     <!--  <Add Key="ProcessTimeoutGcExtension" Value="30" /> -->
     <!--  <Add Key="WatsonFlags" Value="0x0430" /> full dump-->
     <!--  <Add Key="WatsonFlags" Value="0x0428" /> minidump -->
     <!--  <Add Key="WatsonFlags" Value="0x0002" /> no dump-->
     <Add Key="WatsonFlags" Value="0x0428"/>
     <Add Key="WatsonDumpOnExceptions" Value="Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException"/>
     <Add Key="WatsonDumpExcludeIfContainsExceptions" Value="System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException"/>
     <URLReservations>
      <Application>
       <Name>ReportServerWebService</Name>
       <VirtualDirectory>ReportServer</VirtualDirectory>
       <URLs>
        <URL>
         <UrlString>http://+:80</UrlString>
         <AccountSid>S-1-5-19</AccountSid>
         <AccountName>NT Authority\LocalService</AccountName>
        </URL>
       </URLs>
      </Application>
      <Application>
       <Name>ReportManager</Name>
       <VirtualDirectory>Reports</VirtualDirectory>
       <URLs>
        <URL>
         <UrlString>http://+:80</UrlString>
         <AccountSid>S-1-5-19</AccountSid>
         <AccountName>NT Authority\LocalService</AccountName>
        </URL>
       </URLs>
      </Application>
     </URLReservations>
     <Authentication>
      <AuthenticationTypes>
       <RSWindowsNegotiate/>
       <RSWindowsNTLM/>
      </AuthenticationTypes>
      <RSWindowsExtendedProtectionLevel>Off</RSWindowsExtendedProtectionLevel>
      <RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
      <EnableAuthPersistence>true</EnableAuthPersistence>
     </Authentication>
     <Service>
      <IsSchedulingService>True</IsSchedulingService>
      <IsNotificationService>True</IsNotificationService>
      <IsEventService>True</IsEventService>
      <PollingInterval>10</PollingInterval>
      <WindowsServiceUseFileShareStorage>False</WindowsServiceUseFileShareStorage>
      <MemorySafetyMargin>80</MemorySafetyMargin>
      <MemoryThreshold>90</MemoryThreshold>
      <RecycleTime>720</RecycleTime>
      <MaxAppDomainUnloadTime>30</MaxAppDomainUnloadTime>
      <MaxQueueThreads>0</MaxQueueThreads>
      <UrlRoot>http://abraham/Reports</UrlRoot>
      <UnattendedExecutionAccount>
       <UserName></UserName>
       <Password></Password>
       <Domain></Domain>
      </UnattendedExecutionAccount>
      <PolicyLevel>rssrvpolicy.config</PolicyLevel>
      <IsWebServiceEnabled>True</IsWebServiceEnabled>
      <IsReportManagerEnabled>True</IsReportManagerEnabled>
      <FileShareStorageLocation>
       <Path>
       </Path>
      </FileShareStorageLocation>
     </Service>
     <UI>
      <ReportServerUrl>
      </ReportServerUrl>
      <PageCountMode>Estimate</PageCountMode>
     </UI>
     <Extensions>
      <Delivery>
       <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider,ReportingServicesFileShareDeliveryProvider">
        <MaxRetries>3</MaxRetries>
        <SecondsBeforeRetry>900</SecondsBeforeRetry>
        <Configuration>
         <FileShareConfiguration>
          <ExcludedRenderFormats>
           <RenderingExtension>HTMLOWC</RenderingExtension>
           <RenderingExtension>NULL</RenderingExtension>
           <RenderingExtension>RGDI</RenderingExtension>
          </ExcludedRenderFormats>
         </FileShareConfiguration>
        </Configuration>
       </Extension>
       <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider,ReportingServicesEmailDeliveryProvider">
        <MaxRetries>3</MaxRetries>
        <SecondsBeforeRetry>900</SecondsBeforeRetry>
        <Configuration>
         <RSEmailDPConfiguration>
          <SMTPServer>192.168.11.210</SMTPServer>
          <SMTPServerPort></SMTPServerPort>
          <SMTPAccountName>
          </SMTPAccountName>
          <SMTPConnectionTimeout>
          </SMTPConnectionTimeout>
          <SMTPServerPickupDirectory>
          </SMTPServerPickupDirectory>
          <SMTPUseSSL>
          </SMTPUseSSL>
          <SendUsing>2</SendUsing>
          <SMTPAuthenticate>
          </SMTPAuthenticate>
          <From>[email protected]</From>
          <EmbeddedRenderFormats>
           <RenderingExtension>MHTML</RenderingExtension>
          </EmbeddedRenderFormats>
          <PrivilegedUserRenderFormats>
          </PrivilegedUserRenderFormats>
          <ExcludedRenderFormats>
           <RenderingExtension>HTMLOWC</RenderingExtension>
           <RenderingExtension>NULL</RenderingExtension>
           <RenderingExtension>RGDI</RenderingExtension>
          </ExcludedRenderFormats>
          <SendEmailToUserAlias>True</SendEmailToUserAlias>
          <DefaultHostName>
          </DefaultHostName>
          <PermittedHosts>
          </PermittedHosts>
         </RSEmailDPConfiguration>
        </Configuration>
       </Extension>
       <Extension Name="Report Server DocumentLibrary" Type="Microsoft.ReportingServices.SharePoint.SharePointDeliveryExtension.DocumentLibraryProvider,ReportingServicesSharePointDeliveryExtension">
        <MaxRetries>3</MaxRetries>
        <SecondsBeforeRetry>900</SecondsBeforeRetry>
        <Configuration>
         <DocumentLibraryConfiguration>
          <ExcludedRenderFormats>
           <RenderingExtension>HTMLOWC</RenderingExtension>
           <RenderingExtension>NULL</RenderingExtension>
           <RenderingExtension>RGDI</RenderingExtension>
          </ExcludedRenderFormats>
         </DocumentLibraryConfiguration>
        </Configuration>
       </Extension>
       <Extension Name="NULL" Type="Microsoft.ReportingServices.NullDeliveryProvider.NullProvider,ReportingServicesNullDeliveryProvider"/>
      </Delivery>
      <DeliveryUI>
       <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailDeliveryProviderControl,ReportingServicesEmailDeliveryProvider">
        <DefaultDeliveryExtension>True</DefaultDeliveryExtension>
        <Configuration>
         <RSEmailDPConfiguration>
          <DefaultRenderingExtension>MHTML</DefaultRenderingExtension>
         </RSEmailDPConfiguration>
        </Configuration>
       </Extension>
       <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareUIControl,ReportingServicesFileShareDeliveryProvider"/>
      </DeliveryUI>
      <Render>
       <Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.DataRenderer.XmlDataReport,Microsoft.ReportingServices.DataRendering"/>
       <Extension Name="NULL" Type="Microsoft.ReportingServices.Rendering.NullRenderer.NullReport,Microsoft.ReportingServices.NullRendering" Visible="false"/>
       <Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering"/>
       <Extension Name="ATOM" Type="Microsoft.ReportingServices.Rendering.DataRenderer.AtomDataReport,Microsoft.ReportingServices.DataRendering" Visible="false"/>
       <Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer,Microsoft.ReportingServices.ImageRendering"/>
       <Extension Name="RGDI" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.RGDIRenderer,Microsoft.ReportingServices.ImageRendering" Visible="false"/>
       <Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false"/>
       <Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering"/>
       <Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering"/>
       <Extension Name="RPL" Type="Microsoft.ReportingServices.Rendering.RPLRendering.RPLRenderer,Microsoft.ReportingServices.RPLRendering" Visible="false" LogAllExecutionRequests="false"/>
       <Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageRenderer,Microsoft.ReportingServices.ImageRendering"/>
       <Extension Name="WORD" Type="Microsoft.ReportingServices.Rendering.WordRenderer.WordDocumentRenderer,Microsoft.ReportingServices.WordRendering"/>
      </Render>
      <Data>
       <Extension Name="SQL" Type="Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
       <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.DataExtensions.SqlAzureConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
       <Extension Name="SQLPDW" Type="Microsoft.ReportingServices.DataExtensions.SqlDwConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
       <Extension Name="OLEDB" Type="Microsoft.ReportingServices.DataExtensions.OleDbConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
       <Extension Name="OLEDB-MD" Type="Microsoft.ReportingServices.DataExtensions.AdoMdConnection,Microsoft.ReportingServices.DataExtensions"/>
       <Extension Name="ORACLE" Type="Microsoft.ReportingServices.DataExtensions.OracleClientConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
       <Extension Name="ODBC" Type="Microsoft.ReportingServices.DataExtensions.OdbcConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
       <Extension Name="XML" Type="Microsoft.ReportingServices.DataExtensions.XmlDPConnection,Microsoft.ReportingServices.DataExtensions"/>
       <Extension Name="SHAREPOINTLIST" Type="Microsoft.ReportingServices.DataExtensions.SharePointList.SPListConnection,Microsoft.ReportingServices.DataExtensions"/>
       <Extension Name="SAPBW" Type="Microsoft.ReportingServices.DataExtensions.SapBw.SapBwConnection,Microsoft.ReportingServices.DataExtensions.SapBw"/>
       <Extension Name="ESSBASE" Type="Microsoft.ReportingServices.DataExtensions.Essbase.EssbaseConnection,Microsoft.ReportingServices.DataExtensions.Essbase"/>
       <Extension Name="TERADATA" Type="Microsoft.ReportingServices.DataExtensions.TeradataConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
      </Data>
      <SemanticQuery>
       <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
        <Configuration>
         <EnableMathOpCasting>False</EnableMathOpCasting>
        </Configuration>
       </Extension>
       <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
        <Configuration>
         <EnableMathOpCasting>False</EnableMathOpCasting>
        </Configuration>
       </Extension>
       <Extension Name="SQLPDW" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQLADW.MSSqlAdwSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
        <Configuration>
         <EnableMathOpCasting>False</EnableMathOpCasting>
        </Configuration>
       </Extension>
       <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
        <Configuration>
         <EnableMathOpCasting>True</EnableMathOpCasting>
         <DisableNO_MERGEInLeftOuters>False</DisableNO_MERGEInLeftOuters>
         <EnableUnistr>False</EnableUnistr>
         <DisableTSTruncation>False</DisableTSTruncation>
        </Configuration>
       </Extension>
       <Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
        <Configuration>
         <EnableMathOpCasting>True</EnableMathOpCasting>
         <ReplaceFunctionName>oREPLACE</ReplaceFunctionName>
        </Configuration>
       </Extension>
       <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.QueryExecution.ASSemanticQueryCommand,Microsoft.AnalysisServices.Modeling"/>
      </SemanticQuery>
      <ModelGeneration>
       <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
       <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
       <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
       <Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
       <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.Generation.ModelGeneratorExtention,Microsoft.AnalysisServices.Modeling"/>
      </ModelGeneration>
      <Security>
       <Extension Name="Windows" Type="Microsoft.ReportingServices.Authorization.WindowsAuthorization, Microsoft.ReportingServices.Authorization"/>
      </Security>
      <Authentication>
       <Extension Name="Windows" Type="Microsoft.ReportingServices.Authentication.WindowsAuthentication, Microsoft.ReportingServices.Authorization"/>
      </Authentication>
      <EventProcessing>
       <Extension Name="SnapShot Extension" Type="Microsoft.ReportingServices.Library.HistorySnapShotCreatedHandler,ReportingServicesLibrary">
        <Event>
         <Type>ReportHistorySnapshotCreated</Type>
        </Event>
       </Extension>
       <Extension Name="Timed Subscription Extension" Type="Microsoft.ReportingServices.Library.TimedSubscriptionHandler,ReportingServicesLibrary">
        <Event>
         <Type>TimedSubscription</Type>
        </Event>
       </Extension>
       <Extension Name="Cache Refresh Plan Extension" Type="Microsoft.ReportingServices.Library.CacheRefreshPlanHandler,ReportingServicesLibrary">
        <Event>
         <Type>RefreshCache</Type>
        </Event>
       </Extension>
       <Extension Name="Cache Update Extension" Type="Microsoft.ReportingServices.Library.ReportExecutionSnapshotUpdateEventHandler,ReportingServicesLibrary">
        <Event>
         <Type>SnapshotUpdated</Type>
        </Event>
       </Extension>
      </EventProcessing>
     </Extensions>
     <MapTileServerConfiguration>
      <MaxConnections>2</MaxConnections>
      <Timeout>10</Timeout>
      <AppID>(Default)</AppID>
      <CacheLevel>Default</CacheLevel>
     </MapTileServerConfiguration>
    </Configuration>

  • Failed to connect to the server, specify a valid server name and ID and pw

    I am trying to install business one on a clients application server, where their sql server software is installed on a different server. When I get to the point of the installation where it asks for connection information: sql type, sql server name, logon and password, it fails after entering the correct info. I have double checked this info, typed it repeatedly and correctly and I continue to receive the following error: Failed to connect to the server, specify a valid server name and ID and password and try again. Can anyone lead me in the right direction to determine what my issue is? I can connect to sql server with the sa logon, on the sql server and I can access/ping the sql server from the application server, I just can't connect to sql server through the installation. I checked the sql server settings that I know of, so I don't know if it is an issue there or if it is a port issue or what.
    Thanks for any help.

    Following is whjat the customers IT team reported they did to get the install running:
    RIGHT!  Worked it out!    It wasn't firewall in the end at all, it was that the SAP B1 installation isn't aware of SQL Server 2008 R2 (version 10.50.x.x).
    The vbscript was looking for the presence of SQL Server 2008 (version 10.0.x.x) in the registry and not by scanning ports or suchlike.
    If you use the autorun installation from this folder; E:\BusinessEvolution\Software\SAP_Extract_via_WINZIP it should work fine - I've modified the checksql.htm to look for SQL 2008 R2 and now autorun goes past that first problem.
    Not sure if that will be any help to you? In that instance I think we were installing 8.8 PL17...
    The upgrade frpm there to 8.81 PL07 worked fine

  • Mac RDP Client (v8.0.10 on 10.10.1): HTTPEndPointException: 4, The non-proxy http connection failed to connect with the message: 404 Not Found

    My office is setting up a new gateway server.  I can connect to the old one just fine, but the new one is not allowing me to connect.  I can connect from my Windows VM, but not my Mac Client.  
    This is the log:
    2014-Nov-26 16:09:10] RDP (0): Final rdp configuration used: gatewayhostname:s:gat1.gibbscam.com
    screen mode id:i:0
    use multimon:i:0
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    audiomode:i:2
    username:s:Gibbs\JeremyS
    disable wallpaper:i:0
    disable full window drag:i:0
    disable menu anims:i:0
    disable themes:i:0
    alternate shell:s:
    shell working directory:s:
    authentication level:i:2
    connect to console:i:0
    gatewayusagemethod:i:1
    disable cursor setting:i:0
    allow font smoothing:i:1
    allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
    bookmarktype:i:3
    use redirection server name:i:0
    [2014-Nov-26 16:09:10] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 16:09:10] RDP (0): correlation id: d8afdeb7-ce3a-ceff-a6e8-51a5d5b40000
    [2014-Nov-26 16:09:10] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
        User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
    PC, and then try again.
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 16:09:15] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Nov-26 16:09:15] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 16:09:15] RDP (0): correlation id: 3d81bcf6-8d0e-fba8-b75e-bd2a247c0000
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
    [2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
    [2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 305
        User Message : HTTPEndpointException: 4, The non-proxy http connection failed to connect with the message: 404 Not
    Found
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 16:09:16] RDP (0): ------ END ACTIVE CONNECTION ------
    And here's a log for server that I can connect to:
    [2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used: gatewayhostname:s:gato.gibbscam.com
    screen mode id:i:0
    use multimon:i:1
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    audiomode:i:2
    username:s:Gibbs\JeremyS
    disable wallpaper:i:0
    disable full window drag:i:0
    disable menu anims:i:0
    disable themes:i:0
    alternate shell:s:
    shell working directory:s:
    authentication level:i:2
    connect to console:i:0
    gatewayusagemethod:i:1
    disable cursor setting:i:0
    allow font smoothing:i:1
    allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
    bookmarktype:i:3
    use redirection server name:i:0
    [2014-Nov-26 15:52:20] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 15:52:20] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 15:52:20] RDP (0): correlation id: 3bea4411-4b23-c197-9b52-63f948a10000
    [2014-Nov-26 15:52:20] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 15:52:25] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
        User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
    PC, and then try again.
    [2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 15:52:25] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Nov-26 15:52:25] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 15:52:25] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 15:52:26] RDP (0): correlation id: 509122b5-d9b1-60f0-a0ac-b75a8dc20000
    [2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
    [2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
    [2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
    [2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
    [2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolInactive(4)
    [2014-Nov-26 15:52:28] RDP (0): Server supports RAIL
    [2014-Nov-26 15:52:28] RDP (0): Protocol state changed to: ProtocolActive(5)
    [2014-Nov-26 15:52:29] RDP (0): Server hides cursor
    [2014-Nov-26 15:52:31] RDP (0): Server shows cursor
    [2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 15:52:35] RDP (0): ------ END ACTIVE CONNECTION ------
    Any suggestions on what I can ask my IT department to change on the server so I can connect would be greatly appreciated. 

    Hi Jeremy,
    Thank you for posting in Windows Server Forum.
    From the error and other description it seems that there is some misconfiguration with setup. You need to provide the FQDN name of the server as might server name is not resolving its name properly and so facing issue. As seems from below details:
    [2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used:gatewayhostname:s:gato.gibbscam.com
    screen mode id:i:0
    use multimon:i:1
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    Configuration used and full address name both appears different so please verify configuration accordingly.
    Please check the DNS record, check certificate whether it match FQDN name of the server with certificate name, also try to check to connect with IP address and see what result you can find.
    You can follow below guide to configure RD Gateway and after that verify the result.
    1. Deploying Remote Desktop Gateway RDS 2012
    2. How To Work with RD Gateway in Windows Server 2012
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • FRM-99999: Failed to connect to the Server / UNIX

    Upon invoking
    http://hostname.domainname:1080/web_html/olftest.htm
    I am getting the following error:
    FRM-99999: Failed to connect to the Server:
    hostname.domainname:9000
    We are using the following:
    =========================
    Server:
    Unix : Sun Solaris 2.5.1
    Oracle Application Server 4.0.7 and Oracle Developer 6 Server
    are on the same machine
    Oracle Server 8.0.5
    Client machine:
    Windows NT 4 Workstation with SP3,
    Internet Explorer 4.0.1 SP1 with Jinitiator - 1.1.7.11
    We tried following commands to get the Developer 6 Server up and
    running on port 9000 under Unix:
    $ f60ctl start port=9000
    port=9000
    Choosing default pool 1 for this process...
    1
    Forms environment:
    ORACLE_HOME = /opt/oracle/805
    PATH =
    /opt/oracle/805/bin:/opt/oracle/805/ows/4.0/bin:/opt/oracle/805/o
    rb/4.0/admin/cgi:/opt/oracle/805/orb/4.0/bin:/opt/oracle/805/ots/
    1.0/bin:/opt/oracle/805/ows/4.0/jdk/bin:/opt/oracle/805/bin:/usr/
    bin:/usr/ucb:/usr/ccs/bin:/etc:/usr/sbin:/usr/openwin/bin:/usr/lo
    cal/bin:/opt/oracle/805/bin:/opt/bin:/usr/ccp/bin
    LD_LIBRARY_PATH =
    /opt/oracle/805/lib:/opt/oracle/805/orb/4.0/lib:/opt/oracle/805/o
    ws/4.0/lib:/opt/oracle/805/ots/1.0/lib:/opt/oracle/805/lib:/opt/o
    racle/805/lib:/usr/x11r5/lib:/usr/openwin/lib
    FORMS60_PATH = /opt/oracle/805/forms60/html:
    Forms listener started on port 9000.
    $ f60webm
    $ f60srvm
    Failed to bind Launcher to port 9000
    A Developer 6 Server under Windows NT is working fine.
    The Windows NT 4 workstation contains registry settings
    corresponding to this previous Developer Forms Server 6
    configuration on Windows NT. We configured the Developer 6
    Server under Windows NT using the tutorial in %
    ORACLE_HOME%/tools/devdem60/web/readme.htm.
    From a discussion with the Unix DBA team we concluded that this
    tutorial is Windows NT specific.
    Does anyone happen to have a tutorial on deploying Oracle Forms
    to the Web specifically for Developer 6 Server and OAS4 under
    UNIX.
    Which Unix Developer 6 Server environment variables do I have to
    set under Unix for deployment of forms 6.0 on the web?.
    olftest.htm
    <HTML>
    <HEAD>
    <TITLE>Oracle Developer Server and Oracle JInitiator</TITLE>
    <X-CLARIS-WINDOW TOP=25 BOTTOM=608 LEFT=4 RIGHT=927>
    </HEAD>
    <BODY BGCOLOR="#FFFFFF" BACKGROUND="web_bkgd.jpg">
    <TABLE BORDER=0>
    <TR>
    <TD WIDTH=234>
    <IMG SRC="web_anim.gif" WIDTH=230 HEIGHT=300
    ALIGN=bottom></P>
    </TD>
    <TD>
    <OBJECT classid="clsid:9F77a997-F0F3-11d1-9195-
    00C04FC990DC"
    WIDTH=700
    HEIGHT=550
    codebase="http://hostname.domainname:1080/web_html/Jinit.exe#Vers
    ion=1,1,7,11">
    <PARAM NAME="CODE"
    VALUE="oracle.forms.engine.Main" >
    <PARAM NAME="CODEBASE" VALUE="/web_code/"
    <PARAM NAME="ARCHIVE" VALUE="f60all.jar" >
    <PARAM NAME="type"
    VALUE="application/x-jinit-applet;version=1.1.7.11">
    <PARAM NAME="serverPort" VALUE="9000">
    <PARAM NAME="serverArgs"
    VALUE="module=/opt/oracle/805/tools/devdem60/web/start60.fmx
    userid=scott/tiger">
    <PARAM NAME="serverApp" VALUE="default">
    <COMMENT>
    <EMBED SRC="""
    PLUGINSPAGE="http:/hostname:1080/web_html/jinit_download.htm"
    WIDTH=700
    HEIGHT=550
    type="application/x-jinit-
    applet;version=1.1.7.11"
    java_code="oracle.forms.engine.Main"
    java_codebase="/web_code/"
    java_archive="f60all.jar"
    lookAndFeel="oracle"
    colorScheme="teal"
    serverport="9000"
    serverargs="module=start60.fmx
    userid=scott/tiger"
    serverapp=default>
    <NOEMBED>
    </COMMENT>
    </NOEMBED></EMBED>
    </OBJECT>
    </P>
    </TD>
    </TR>
    </TABLE>
    </P>
    </BODY>
    </HTML>
    Any help on this issue will be greatly appreciated,
    Erik
    null

    "NoRouteToHostException" => This looks like routing issues through the proxy server.
    You can involve network admin to take care of the settings at proxy , to allow connections through the proxy server.
    Cheers
    Rahul

  • Failed to connect to the applications engine.....

    Hi, Using PS Elements 8.0 on a PC.  When trying to edit now keep getting message 'failed to connect to the applications engine'.  Any ideas how to fix this?  Really appreciate some help.
    Thanks
    Gordon

    Hi Ashley,
    You can use Network Monitor and run it on the remote DP at the time ConfigMgr is attempting to install the DP role to capture more information on what may be causing the issue.
    Here is the download link to NetMon -
    http://www.microsoft.com/en-us/download/details.aspx?id=4865
    And here are some how to's on using NetMon just in case:
    http://support.microsoft.com/kb/812953/en-us
    http://blogs.technet.com/b/netmon/p/usagevideos.aspx
    Best of Luck,
    -Matt

  • 8.0.1 fails to connect to the web AT ALL when Internet Explorer can

    8.0.1 has failed to connect to the web persistently since updating to this new version - Internet Explorer has no problem at present.

    See http://kb.mozillazine.org/Firewalls

Maybe you are looking for

  • Addition of new fields to existing Infotype: Error in Quality Server.

    Hi Experts, I have added new fields by adding custom include to Infotype 4000 using t-Code PM01.  It is working perfectly fine in DEV. But, in QLT, the custom Include is not attached to the P4000 structure. Independently, CI_P4000  exists in QLT. I h

  • Index not being used in Select statement

    Friends I have the following SQL statement: SELECT a.acct, a.date_field, UPPER(b.feegroup) feegrp, SUM (a.fee1) fee1, SUM (a.fee2) fee2, SUM (a.fee3) fee3 FROM table1 a, table2 b WHERE 1 = 1 AND a.fee_id = b.fee_id GROUP BY a.acct, a.date_field, b.fe

  • Time Recording & Reports

    Hi All, We have a scenario of - Ve management where In/Out timings only get recorded. Here we have created an BDC program for uploading the timings. After uploading the information, we need to take a report on daily n monthly basis, which will includ

  • Itunes cannot display chinese characters

    itunes cannot display my songs in chinese character.

  • IOS Data Protection

    When setting an App ID for my DPS App in the iOS Developer account I have the choice to set Data Protection. Do I set this on or off and if on what level of Sharing and Permissions do I use?