Jabber and Voicemail Access

Hello,
I've configured CUCM and IM&P v9.1 and jabber client 9.2(1), the  chat and the calls work fine but when I try to log in Phone Accounts -> Voicemail I get an error about the credentials, I have all integrated with Active Directory and the user and password that I'm using for voicemail is the same that I use to log in the jabber client wich worked fine.
Here I attached the error screen.
What do you think can be causing this??
Thanks in advance.

Hi every body,
I have some problems but not with all the users, is only working with 3 users and the rest of them don't work, I attached the errors that I get when I try to log in Telephony Accounts in the Jabber, I used the Jabber of one User, and from here I introduce my credentials (user and password) and I can get the voice mails (only from de 3 users that is woriking fine), but when I introduce the credentials of the other user I get the error and Can't get the voicemails.
The 127.23.0.7 is the IP address of the Cisco Unity Connection.
Please Help Me I'm stuck with this!

Similar Messages

  • Jabber and Voicemail Notifications

                       Hello guys!
    Is it possible to receive voicemail notification on both jabber and desk phone at the same time? For example, if a user has a desk phone as primary extension on CUCM 8.6, the Unity use that extension for VM. But if the user has also a jabber client version 9.x for Windows and wants to receive voicemail on jabber, what is the best design option? Assign the same DN to both jabber and desk phone?
    Also, I set up visual voicemail for jabber but left a voicemail in jabber and no notification appeared, where should i look into? The voicemail server and profile with users were added in CUP.
    Note: The scenario is a BE6000 platform with CUCM8.6, CUCxN,8.6, CUP8.6 and CUPM8.6.
    Thanks in advanced!

    Why would you have different extensions on desk phone vs. jabber? Normally this is not desired for user to manage 2 different numbers.
    If however that is a requirement you can always define alternate extension on Unity Connection.
    For VM configuration did you configure all the service in CUPS server, i.e. mailstore?
    HTH,
    Chris

  • Cisco Jabber and Voicemail

    Hi
    I have CUPS, CUC and CUCM in HQ. And rest of my Branches have SRST routers which have local cisco unity express for voicemail;s but ip phone numbers are from cucm in hq.
    Now HQ users get to see their voicemail messages in their Windows Jabber, but branch users dont get to see their voicemail on windows jabber.
    Although voice mail ports are configured on cucm for branch cisco unity express, and voice mail works fine for branches but how do we integrate cisco unity express with presence server.
    Now on cucm, under user management-> user setting->service profile, only profiles which are there are for cisoc unity connection.
    Can somebody tell me how do we get voicemail of cisco unity express users on windows jabber.
    Thanks and regards
    Vibha

    Hi Vibha,
    Unity express is not supported for voicemail integration for jabber. You can refer the below:
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/10_5/rn/JABW_BK_J559CFFB_00_jabber-windows-release-notes-10-5/JABW_BK_J559CFFB_00_jabber-windows-release-notes-10-5_chapter_01.html#JABW_RF_SB575AAA_00
    Regards

  • Cannot login to Cisco Jabber 10.5.1 over Mobile and Remote Access

    Hi,
    We have deployed sucessfully VCS Expressway-C and VCS Expressway-E with only 1 zone which is "Unified Communication Traversal" and is for Mobile and Remote Access only. VCS-C and VCS-E are communicating and in statuses everything is active and working. Also VCS-C can communicate with CUCM and CUP (both version 10.5).
    Problem is when I deploy Cisco Jabber 10.5.1 on computer outside of LAN and without VPN it start communicating with VCS-E, ask me for accepting certificate (we have certificate only intenally generated on Windows CA) and after that it is trying to connect and after few seconds it will tell me that it can't communicate with server.
    Did any of you had same problem or can you advice how to troubleshoot? In Jabber logs there is only something like "Cannot authenticate" error message, but when I startup VPN I can authenticate without any problems.
    Thanks

    On Expressway-C are your HTTP Allow Lists setup properly?  By default, and auto discovered CUCM and IMP should be listed via IP and Hostname, but if not, you'll need to insert manually.
    Also, you can look at the config file your Expressway-E would be handing out to Jabber via this method.
    From the internet, browse to:
    https://vcse.yourdomain.com:8443/Y29sbGFiLmNvbQ/get_edge_config?service_name=_cisco-uds&service_name=_cuplogin
    Where:
    vcse is your Expressway-E hostname (or CNAME/A record)
    yourdomain.com is your own domain
    The first directory is your Base64 encoded domain name, remove and trailing equal signs (=)
    The XML returned is basically the DNS SRV record information available as if internal for _cisco-uds and _cuplogin
    TFTP DNS SRV is optional if you configured TFTP in IMP for your Legacy Clients.

  • Jabber and Gmail Don't Work on my iChat

    Hello! I bought my Mac in August 2009. When I first bought it, gmail and Jabber worked iChat. But shortly after, it stopped working. It hasn't worked since then. Whenever I would try to create a Jabber or Gmail account on iChat, the words Jabber and Gmail would be grayed out and un-clickable. I recently upgraded to software version 10.6.6 and Jabber and Gmail still don't work on iChat. They're not grayed out anymore, they're just not there! Aim, Bonjour, MobileMe, and Mac.com accounts all work on my iChat.
    Additionally, I took my Mac to the Genius Bar and they couldn't fix it!
    Does anyone know how to fix my problem?
    Thanks!!

    Hi,
    Welcome to the    Discussions
    Sounds like you have Parental Controls turned On for the Mac User Account you are using.
    I take it you are not seeing 5 choices in the iChat Menu > Preferences > Accounts > + Button > New account Pane ?
    The Start Up Screens do have the AIM login options (AIM, @Mac.com and MobileMe) on one pane/Screen and then the Bonjour option and the Jabber/Google options on another Screen/pane.
    IF you are not logged on the Computer as the Admin Account the Mac User Account can have Parental Controls activated.
    (System Preferences > Accounts - the account will be listed as "Managed"
    Limiting iChat in Parental Controls stops you adding any Buddy List (Setting up a new account).
    In iChat 4/OS 10.5.x Jabber and Bonjour are disabled completely (Just Bonjour in iChat 5/OS 10.6.x)
    Your symptoms as described, if we are talking about the iChat Preferences way of Adding a New Account, does not seem to quite match the scenario I have described about Parental Controls, as you seem to still have access to setting up a new AIM name.
    Did the Tech guy delete the .plists for iChat ?
    Did he/she delete them 'En Masse' or one at a time with an iChat Restart in between ?
    7:26 PM Thursday; January 20, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Jabber and Google Talk Issues

    I use a Google Talk account, and I was delighted to see that iChat was compatible with it. However, one day it stopped working and I saw my account was deleted. I went to re-create it and Jabber and Google Talk are no longer choices I can choose from. I can see them, but I can't actually select them. Any help would be great, because a lot of my friends are Google Talkers.

    Have you Enable Parental Controls on this Mac User Account ?
    Have you set Parental Controls on another User Account and set iChat up with the same ID ?
    (Have you used the same ID/Screen Name on another computer that has Parental Controls ?)
    If you have and you have not allowed the Jabber Buddies to be listed or have not set the iChat part up in the first place you will have issues as Jabber (and therefore Googletalk) and Bonjour can be Blocked.
    This more effects Leopard than it does Snow Leopard but that was why I hinted at other computers because it blocks the Buddies by Flagging them on the Server (this does not explain why you cannot access the choice in the current iChat)
    4:41 PM Saturday; October 3, 2009

  • Jabber and webex integration

    Hello everyone,
    We're trying to integrate meeting place and webex with our presence service to allow Jabber and CUP users to use all of the available features we have.
    We're having some issues to get webex up and running because we're getting a "The WebEx meeting account is invalid" message everytime we try to access from jabber.
    If I go to meeting center I can successfully log in using the same credentials I'm using on jabber so I don't understand why it says the account is invalid.
    This issue happens for all of the users. Have anyone seen this behaviour already?
    Thanks!!

    We use Meeting Center rather than Meeting Place but I think the authentication is similar. The problem I had was since we use Meeting Center (cloud WebEx) and do not use SSO the accounts are different. Once the Not Set "Source for Web Conferencing" was configured, I was able to goto the client (Mac Jabber 8.6.2 in this case) and enter my credentials in Preferences -> Accounts -> Meetings

  • Firefox is using large amounts of CPU time and disk access, and I need to know how to shut down most of this so I can actually use the browser.

    Firefox is a very busy piece of software. It's using large amounts of CPU time and disk access. It puts my usage at low priority, so I have to wait for some time to be able to use my pointer or keyboard. I don't know what it uses all that CPU and disk access time for, but it's of no use to me. It often takes off with massive use of resources when I'm not doing anything, and I may not have use of my pointer for several minutes. How can I shut down most of this so I can use the browser to get my work done. I just want to use the web site access part of the software, and drop all the extra. I don't want Firefox to be able to recover after a crash. I just want to browse with a minimum of interference from Firefox. I would think that this is the most commonly asked question.

    Firefox consumes a lot of CPU resources
    * https://support.mozilla.com/en-US/kb/Firefox%20consumes%20a%20lot%20of%20CPU%20resources
    High memory usage
    * https://support.mozilla.com/en-US/kb/High%20memory%20usage
    Check and tell if its working.

  • How to find out list of users and their access on Sharepoint

    Hello Everyone
    How can i find out list of users and what access they have on SharePoint site? I want to create table with list of the users and their access?
    Thanks

    you can get the report using below powershell scripts. first one gives list of users in a site collection level.
    The second link generates the permissions reports for each user.
    http://techtrainingnotes.blogspot.com/2010/12/sharepoint-powershell-script-to-list.html
    https://sp2010userperm.codeplex.com/
    My Blog- http://www.sharepoint-journey.com|
    If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

  • I lived in the US for a few years, spent a fortune on iTunes [my then local Apple ID account].  Now I live in South Africa and want to use Match.  I have a local credit card but how do I use my new / 2nd Apple ID and gain access to all my US music??

    I lived in the US for a few years, spent a fortune on iTunes [my then local Apple ID account].  Now I live in South Africa and want to use Match.  I have a local credit card but how do I use my new / 2nd Apple ID and gain access to all my US music??

    You have to be in a country to use its store - you will need to be in the US and have a US billing address on your account to be able to use the US store (that applies to buying and redownloading).
    You can use iTunes Match in South Africa, do you not have a backup copy of all of your US iTunes purchases so that you can subscribe to it and upload those that aren't in the South African store to it ?

  • Jabber and O365 integration

    Hello,
    Do we need any additional licenses from Cisco or Microsoft to make a full possible integration between O365 and Jabber ?
    For example features like :
    Single Inbox Unified Messaging with SpeechView transcriptions,  Microsoft Word Click to Call, SharePoint Presence & Click to Call,  Jabber video calling and desktop sharing, and WebEx on desktop and iPad,
    Thank you for your help
    Best Regards,
    Tomasz

    Tomek,
    There is no direct integration between Jabber and Office 365, except for Exchange Gateway integration on IMP server side which is not supported with Office 365. All other Jabber integrations do not go to Office 365, calendar client integrations are done with Outlook, and UM integration is between Office 365 and Unity Connection, which does not affect Jabber.
    HTH,
    Chris (Krzysiek) :-)

  • Jabber and Desk Phone Integration

    When stting up "Desk Phone Integration" on cisco Jabber on a test iPhone, Jabber loops forever when verifying account information saying just "verifying...". It never display an error message. It will eventually stop, the "Desk Phone Integration" staying "Not Configured"
    CUCM version : 8.6(2)
    iPhone iOS : 6.0.1
    Jabber client : 9.0.2.20078
    I followed the instructions in the "Administration Guide for Cisco Jabber for iPhone Release 9.0.1" to setup the call manager.
    I created a dedicated SIP profile,
    created the TCTTEST "Cisco Dual Mode for iPhone" phone according to the documentation
    and edit my phone and user settings according to the "Enable Active Call Transfer Between Cisco Jabber and Desk Phone" section of the documentation
    despite all that, it doesn't work
    I tried with other accounts/mobiles and the result is the same.
    Jabber does register to the CUCM and I can get my extension on the Jabber client and place/receive calls using my desk extension. But the "desk phone integration" doesn't work
    What I noticed is that :
    on the TCTXXXX "Cisco Dual Mode for iPhone" phone device setting page, there is no "Sign In Feature" option as described in the documentation
    because we use Extension mobility the "Owner User ID" feature is disable on the desk phone device settings. I temporarily uncecked the "extension mobility" checkbox on the device, setup my ID as the "Owner User ID" and re-checked the "extension mobility" checkbox but the result is the same.
    I searched the web and couldn't find anyone with similar issue...help will be appreciated

    Aaron,
    Thanks for you answer.
    I have followed all the requirements explained in the "Administration Guide for Cisco Jabber for iPhone Release 9.0.1" including the one you mentioned :
    the user is a member of  'Standard CTI Enabled'
    CTI Controlled is allowed on the DN, the end user account and the desk phone
    the end user is associated to both the desk phone and the TCT phone
    And 'Allow End User Configuration Editing' is set to disable on the TCTxxxx device
    Despite all that the "desk phone integration" doesn't work

  • Jabber and Messages: error with cert

    Hi all,
    Since upgrading to Mavericks, I'm not able to connect to my company's Jabber server. I get a cert error, even after I've trusted the cert. All Mavericks users at our company are having the same problem, so the problem isn't just on my computer. I've enclosed a screen shot of the error.
    Is anyone else having the same problem? The same setup - Jabber and Messages - works fine in Mountain Lion and previous OS versions.
    Thanks!

    Hi,
    Look at item 4 in this article
    http://support.apple.com/kb/TS3970
    Some people deliberately alter this file to prevent some apps from "phoning home"
    If I am reading this Cert info correctly you are one of the companies that someone might block.
    9:58 pm      Monday; November 4, 2013
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Jabber and AIM/.Mac contacts in ONE window

    I would like to have a single iChat window that combines the Jabber and AIM/.Mac buddies. That way I can log on to AIM directly from iChat (and use video/audio) and also be able to log on to google chat MSN via jabber gateways. I hate having two different windows for each buddy list.
    I there a way of doing this with Leopard's iChat?

    Hi,
    I use several including GoogleTalk.
    It is not about whether the server can do Audio or Video as Most Jabber Servers can not
    iChat invokes it's A/V protocols whichever Buddy list it is in which do not use the same ports as any of the Buddy List's logins.
    The A/V side is independent of the Text based side.
    I have found that the Green icons show up.
    This seems independent of whether the Jabber Server supports it.
    8:15 PM Sunday; November 25, 2007

  • Jabber and Yahoo gateways

    Having a problem using Jabber and a Yahoo gateway. I set up an account (using Psi) and that was successful. I can chat with others using Psi just fine. But when I set up iChat to do this it recognizes my account, logs me in but when I open a chat with a Yahoo buddy I see them typing but the message never appears. My Yahoo Messenger and Psi work just fine but iChat is a no go I've tried creating a new Jabber account (with Psi) same results. Tried it on 2 different computers - iBook G4 and 933 mhz QuickSilver G4. Same results. Anyone have any ideas?

    Strange.
    I'm still having the same problem with the server you recommended. I'm wondering if there is something that I'm not configuring correctly in Psi or iChat.
    Just to reiterate the issue:
    I can sign up for a Jabber account,
    configure it using Psi (loading the yahoo and msn gateways),
    Log out of Psi,
    Register the Jabber account in ichat and log in,
    What works:
    The contacts appear in my iChat Jabber list,
    Those that are online appear online
    I can send a message out to the contact
    What doesn't work:
    Receiving incoming chats from buddies
    Receiving replies to chats that I've initiated
    Actions I've taken so far:
    Enabled port 5222 and 5223 on UDP and TCP
    I've tried with SSL activated and deactivated
    Any other ideas or recommendations for servers that are working?
    Thanks,
    ...Jamie

Maybe you are looking for

  • Error while signing a document using API

    Hello. I'm using API functions to add a digital signature to a PDF document. While signing this document, I receive an error which looks like: com.adobe.livecycle.signatures.client.types.exceptions.PDFOperationException: ALC-DSS-303-001 Could not sig

  • Xorg layout still doesn't work (almost)[SOLVED]

    Hi, After struggling to enable keyboard layout after the latest upgrage, I managed to do the following: I enabled Hotplugging, and configured it to work. In the KDM login screen (prior to login), everything works fine: I got both layouts I want, and

  • Real Racing 3?

    Hi guys its me again and i was wondering if i should go ahead and update my iPhone because i heard the iPhone 5 is faster than the iPhone 4 and my question was does real racing 3 lag on the iPhone 5 if so how do i stop it?

  • Check the number assignment is External or Internal based on Account group?

    I want to validate in my program whether the given account group in vendor creation XK01 will accept External number or internal number range. Scenario: I want to create some vendor's with SAP internal number range and some vendor's with external num

  • ISE 1.3 Internal CA

    Hi,      I am looking for some assistance on the new local CA. My client provisions and launches the Cisco Network Setup Assistant but once I hit start, the client fails. Tail logs off the ISE node produce the following.. 2015-01-09 16:00:00,155 WARN