Jabber Client for Windows video not working with ManyCam

Hi everyone.  We've been kicking around the Cisco Jabber client and I've noticed a small issue when it comes to video.  I use a software package called ManyCam (http://www.manycam.com/) which creates a web cam that allows me to put effects on my actual web cam's video feeds.  Primarily I use it when I'm in a remote office and have a video stream back to the main office I can put effects on the screen like "On a conference call" and such so people won't get upset when they approach me and I fail to respond to them.  I use it with other applications just fine but with Cisco Jabber (v9.2.0 Build 496) when I attempt to set it the ManyCam camera as the video source in the video configuration of Cisco Jabber the preview doesn't appear.  As well when I connect to another Cisco Jabber user they do not see my video stream.
Anyone else notice this?  Or does anyone else have a link to some similar software that will give me equivalent functionality to ManyCam that works with Cisco Jabber?
Thanks!

Only if they are on a Mac using iChat(gmail account).
Have a look at http://mail.google.com/videochat

Similar Messages

  • Directory Caching issue with Cisco Jabber client for Windows

    Hi ,
    I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
    Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
    Is there any automated way to remove the cache file? 
    Here is the detail of CUCM,Presence and Jabber.
    CUCM version: 9.1.x
    Presence          : 9.1.X
    Jabber              : 10.5 and 10.6

    Hello
    On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
    Network Device Enrollment Service.
    Our certificate for the CUPS were generated on this Certification Authority too.
    I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
    Enterprise Trust store for the users.
    But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
    I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
    Our partner left us alone with that unfortunately.
    Florent
    EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

  • No Jabber client for Windows Phone 8.1

    Can you advise on when a Jabber client for Windows Phone 8.1 will be released?

    Roadmap questions cannot be addressed here, either ask in a partner forum, or reach your SE/AM for this.

  • HT1338 why is the video not working with skype on this os

    why is the video not working with skype on this os

    Try this:
    Quit Skype.
    Click on the desktop so Finder is active. Hold the option key down and click on Go in the menu bar.
    In the drop down, select Library.
    Open the Library folder and scroll down to Preferences.
    In that folder, there is a file called com.skype.skype.plist. Trash that file.
    Now try Skype.

  • HP B500 Wireless Bluethooth Adapter for HP Printer Not Working With Windows 8.1

    I have been using the HP BT500 bluetooth Wireless adapter to print wirelessly to my HP Officejet Pro 8500 printer.  I have been using Windows Vista, but recently upgraded to Windows 8.1.  I learned after the upgrade that the HP B500 wireless bluetooth adapter is not compatable with Windows 8.1.  I have attempted to find a driver upgrade for the B500, but there does not appear to be one available.  I have also searched the HP site and other sites in an attempt to locate an alter wireless blotth adapter to replace the B500, but have again been unable to locate one. 
    Is there a wireless bluetooth apter that will allow me to print wirelessly to my HP Office Pro 8500 from my laptop?

    Hi @Raider83,
    Welcome to the HP Forums!
    I noticed that your HP B500 wireless bluetooth adapter for your HP Officejet 8500 is not working with Windows 8.1. I am sorry to hear this but happy to look into this for you!
    I am not sure if you are using a 32-bit or 64-bit Operating System. But sometimes with Windows 8.1 you can use compatibility mode to install an older version of the driver. Which might help the situation. Here is a link to some other Windows drivers, HP bt500 Bluetooth USB 2.0 Wireless Adapter Drivers.
    Once you got a driver downloaded, follow this guide, Make older programs compatible with this version of Windows, on how to install it using compatibility mode.  It is not guaranteed to work, but it is worth a try!
    If you still need me to look for other bluetooth adapters, please respond with your printer's Product/Model Number. To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number. As there are multiple HP Officejet 8500 printers.
    Thank you for posting, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • My operating system windows XP not working with photoshop cloud, why not?

    I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
    Please help
    Roy

    Do you have the latest version of iTunes?  If not, get it at:
    http://www.apple.com/itunes

  • Firefox for aol dose not work with aol emails.Why

    Since the email inter face changed I can no longer send email attachments, even items embeded in the email body come out blank at the other end. I use Firefox configured for AOL but that dose not make any difference. I had no problems untill this change is there anyway to reset it. AOL say the problem must be with your software. They sujested that I try using IE 9, I would rather stay with Firefox as I find it is a much better browser.

    ''ralphieboy [[#question-1022015|said]]''
    <blockquote>
    for some reason firefox does not work with the new Email window on yahoo.com All the other browsers work with yahoo mail just fine!! Are you working on a fix???
    </blockquote>
    I have had the problem of Yahoo! mail freezing (my computer freezing) with Firefox right after I boot up my computer and sign into my Yahoo! mail account. I have to either shut down my computer or use Control + Alt and press Delete to eventually bring up the Task Manager option. Then, once the choice for Task Manager comes up, I can click on cancel and Yahoo! mail and my computer have "un-frozen." I have followed all the recommendations for updating Firefox, clearing caches, checking if an Add-On is the problem, etc., as well as all the recommendations on Yahoo! help pages. Nothing has improved the situation to date. Firefox info says the problem is with Yahoo! Yahoo! says it is a browser problem. I just want the problem to be fixed.

  • Safari for Windows is NOT compatible with Unicode 3.1 CJK characters!

    This is an "old" problem since Safari for Windows was initially released. In the meantime, the problem is still not fixed in the latest version 4.0.3 (531.9.1).
    Not only Safari (for Windows) does not properly show homepages that contain Unicode 3.1 CJK characters, but it also fails to show Unicode 3.1 CJK characters (it shows "squares" instead) in the whole application, such as Search box and all dialog boxes. Will this be fixed in the next release?
    By the way, it is strange that Safari 4 for Mac is Unicode 3.1 compatible.

    To speak more precisely, the Safari for Windows doesn't support CJK characters of Unicode CJK Unified Ideographs Extension B.
    The following test illustrates the incompatibility of Safari for Windows:
    1. Sample text displayed in Firefox 3.0.2 on Fedora 9.
    http://farm4.static.flickr.com/3020/3002743180_e026d5c84b.jpg
    2. Sample text displayed in Safari 3.x/4.x on Windows XP with "MingLiu Ext-B" (an Ext-B font provided by Microsoft) installed.
    http://farm4.static.flickr.com/3224/2971019999_1c113109a9.jpg

  • Is there a jabber client for windows users that's working?

    hello all,
    i've just deployed os x server 10.5 (standard configuration, upgraded to 10.5.3) and i have some users that are using ms windows. i can't seem to get google talk or any other windows jabber clients to successfully connect to the ichat server. i've tried to use the same server settings that i'm using when i create a new jabber account in ichat with google talk and a few others with no success. am i missing something? does anyone know of a windows jabber client that is currently working? if so, can you also share with me your findings (the settings or best practices for setting up this windows jabber client). the os x server ichat docs state several times that google talk should work. but after some research here, it looks as if it doesn't current work. any insight would be greatly appreciated.
    thanks,
    tsul
    Message was edited by: tsul

    I think Pidgin is the solution for you. It's quite easy to configure and seems quite reliable! It works well for me. I have use a portable version of it to connect from Windows XP/2000 to a 10.5.3 Server.
    http://www.pidgin.im/

  • Driver for OfficeJet J4580 Not Working with Windows 7 Profession​al

    I am trying to install the driver on a new Toshiba laptop but the driver keeps failing.  I have tried the Basic and Comprehensive drivers.  After downloading, I get a prompt to extract the driver, then I get an error message that says the file is corrupt, cannot extract. I get the same error message with both drivers.   I am downloading the drivers from the HP website. I am using Windows 7 Professional 64-bit.  I do not have the printer plugged in (it's plugged into my very old Windows XP laptop and works fine there).   I have left e-mail messages to Support through the HP site and have not gotten an answer.  Is this printer just too old for my new computer?  Do many of the HP printers have problems with Windows 7?  Any assistance is appreciated.  Thank you!

    Hi @OrdinaryHPUser,
    Welcome to the HP Forums!
    I noticed that you cannot install the driver for your HP Officejet J4580 on Windows 7. I am happy to help!
    Full feature software and drivers, are available for this printer on Windows 7. So the printer is compatible. I would recommend to try the following steps:
    Uninstall the software. Uninstalling the Printer Software. (Only if the software is partially installed, otherwise you can skip this step.)
    Clean boot the computer. How to perform a clean boot in Windows.
    Disable any Antivirus programs. Disable Antivirus software.
    Disable any firewall programs. Turn Windows Firewall on or off.
    Create a new user account. Managing User Accounts and Logins (Windows 7).
    Reinstall using the HP Printer Install Wizard for Windows.
    Hope this will solve the issue, and have a good day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Air Display for Windows 7 not working

    I recently installed Air Display v1.6.1 for my iPad 2 and Air Display for Windows.
    Both my laptop and iPad are connected to the same WiFi.
    Whenever I click on my iPad's name in Air Display on my laptop, nothing happens. My iPad's screen still stays on the Air Display instruction screen with no flashing of the screen as I see on YouTube videos. Any help would be appreciated .

    dwinpenny wrote:
    Hi,
    Have a new IMac and am trying to get Isight working in a Parallels Windows 7 VM environment.
    Isight works fine in Mac OS (Skye, Oovoo, etc).
    Tried to install the drivers from the Mac OS disk (appleisightinstaller.exe) and they appear to be installed okay.
    BUT, while the device exists, I cant see any picture or when I click on settings get no settings to change. Additionally, the Isight led on the device never comes on.
    Anyone got any ideas as to what I should do.
    I have tried:
    1. De-installing the driver and reinstalling
    2. Have edited the registry in Windows to delete all references
    The reason I would like to get this working is I am trying to use Polycom PVX video conferencing software (I need it for work) and so my idea was to run it in a Parallels VM as its only available for Windows.
    Hope you can help
    Cheers
    Dave W
    Welcome to Discussions, Dave (dwinpenny)
    I don't use Windows®, but here are a couple things to consider if you have not already done so and do not get better help here.
    (1) Does this help you? http://kb.parallels.com/5028
    (2) Consider XMeeting as a possible OSX alternative for connecting to your work's Polycom system:
      http://xmeeting.sourceforge.net/pages/index.php
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
    LED Cinema Display  G4 PowerBook 1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

  • Cisco Jabber Client for Windows 9.7 Can't Connect to Other IPSec VPN Clients Over Clustered ASAs

    Environment:
    2 x ASA 5540s (at two different data centers) configured as a VPN Load Balancing Cluster
    Both ASAs are at version 8.4(5)6
    IPSec VPN Client version: 5.0.07.440 (64-bit)
    Jabber for Windows v9.7.0 build 18474
    Issue:
      If I am an IPSec VPN user…
       I can use Jabber to another IPSec VPN user that is connected to the same ASA appliance.
       I can’t use Jabber to another IPSec VPN user that is connected to the different ASA appliance that I am connected to.
    In the hub-and-spoke design, where the VPN ASA is a hub, and the VPN client is a spoke; if you have two hubs clustered together, how does one spoke communicate with another spoke on the other hub in the cluster? (How to allow hairpinning to the other ASA)

    Portu,
    Thanks for your quick reply.
    Unfortunately, I do not have access to the ASA logs nor would I be permitted to turn on the debug settings asked for above.  I might be able to get the logs but it will take awhile and I suspect they wouldn't be helpful as this ASA supports thousands of clients, therefore, separating out my connection attempts from other clients would be difficult.
    I can, though, do whatever you want on the Linux router.  Looking over the firewall logs at the time of this problem, I don't see anything that looks suspicious such as dropped packets destined for the Windows client.
    As I said in my original post, I'm not a networking expert - by any means - but I am willing to try anything to resolve this.  (But I might need a bit of handholding if I need to set up a  wireshark andor tcpdump.)
    Thanks again.

  • Cisco Jabber Client for Windows 9.7 Can't Connect IPSec VPN Clients over two ASAs

    Environment:
    2 x ASA 5540s (at two different data centers) configured as a VPN Load Balancing Cluster
    Both ASAs are at version 8.4(5)6
    IPSec VPN Client version: 5.0.07.440 (64-bit)
    Jabber for Windows v9.7.0 build 18474
    Issue:
      If I am an IPSec VPN user…
       I can use Jabber to another IPSec VPN user that is connected to the same ASA appliance.
       I can’t use Jabber to another IPSec VPN user that is connected to the different ASA appliance that I am connected to.
    In the hub-and-spoke design, where the VPN ASA is a hub, and the VPN client is a spoke; if you have two hubs clustered together, how does one spoke communicate with another spoke on the other hub in the cluster? (How to allow hairpinning to the other ASA)

    Portu,
    Thanks for your quick reply.
    Unfortunately, I do not have access to the ASA logs nor would I be permitted to turn on the debug settings asked for above.  I might be able to get the logs but it will take awhile and I suspect they wouldn't be helpful as this ASA supports thousands of clients, therefore, separating out my connection attempts from other clients would be difficult.
    I can, though, do whatever you want on the Linux router.  Looking over the firewall logs at the time of this problem, I don't see anything that looks suspicious such as dropped packets destined for the Windows client.
    As I said in my original post, I'm not a networking expert - by any means - but I am willing to try anything to resolve this.  (But I might need a bit of handholding if I need to set up a  wireshark andor tcpdump.)
    Thanks again.

  • Isight drivers for WIndows 7 - not working?

    Hi,
    Have a new IMac and am trying to get Isight working in a Parallels Windows 7 VM environment.
    Isight works fine in Mac OS (Skye, Oovoo, etc).
    Tried to install the drivers from the Mac OS disk (appleisightinstaller.exe) and they appear to be installed okay.
    BUT, while the device exists, I cant see any picture or when I click on settings get no settings to change. Additionally, the Isight led on the device never comes on.
    Anyone got any ideas as to what I should do.
    I have tried:
    1. De-installing the driver and reinstalling
    2. Have edited the registry in Windows to delete all references
    The reason I would like to get this working is I am trying to use Polycom PVX video conferencing software (I need it for work) and so my idea was to run it in a Parallels VM as its only available for Windows.
    Hope you can help
    Cheers
    Dave W

    dwinpenny wrote:
    Hi,
    Have a new IMac and am trying to get Isight working in a Parallels Windows 7 VM environment.
    Isight works fine in Mac OS (Skye, Oovoo, etc).
    Tried to install the drivers from the Mac OS disk (appleisightinstaller.exe) and they appear to be installed okay.
    BUT, while the device exists, I cant see any picture or when I click on settings get no settings to change. Additionally, the Isight led on the device never comes on.
    Anyone got any ideas as to what I should do.
    I have tried:
    1. De-installing the driver and reinstalling
    2. Have edited the registry in Windows to delete all references
    The reason I would like to get this working is I am trying to use Polycom PVX video conferencing software (I need it for work) and so my idea was to run it in a Parallels VM as its only available for Windows.
    Hope you can help
    Cheers
    Dave W
    Welcome to Discussions, Dave (dwinpenny)
    I don't use Windows®, but here are a couple things to consider if you have not already done so and do not get better help here.
    (1) Does this help you? http://kb.parallels.com/5028
    (2) Consider XMeeting as a possible OSX alternative for connecting to your work's Polycom system:
      http://xmeeting.sourceforge.net/pages/index.php
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
    LED Cinema Display  G4 PowerBook 1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

  • HP Help Number for Windows 7 not working

    I have a problem with my Windows 7 upgrade.  The instructions from HP say that in the US to call 1-888-447-0150.  That number answers, there is a beep and the line is cut off.
    Why is the number given in the HP instructions not working?

    Yes, it doesn't work for me either. It connects, then a very short music blip plays and it's then transferred to nowhere and disconnects.
    HP has gone to the dogs!
    My install of Windows 7 got to the last item on the list, about three quarters of the way through the install (the green bar) and has hung for about 10 hours now without a  sign of movement, and HP is nowhere to be found to help.

Maybe you are looking for