Jabber voice mail for some users.

Dears,
J4W voicemail works perfect with default config.xml file for some of the users and for some of the users it shows the attached when clicked on voicemail tab. I have create 2 no's of sevice profile, the voice mail credential set  for both service profile is Unified CM IM and presence.
I can understand the prompt as it is asking for voicemail password for that reason i have to create a custom config.xml file and i have to upload in TFTP server, But my concern is why it is working for some of the users without config.xml file and for some users it is prompting for username and password.
Thanks

Dears,
the profile are different, but if i put the the other users working profile also it is not working.
The voice mail server is showing not connected in jabber,
Any hints.
Thanks

Similar Messages

  • Unity 3.1(5) prblm retrieving voice mail for single user

    I have a customer with one user who cannot retrieve their voice mail new / saved. When she logs into via their extension it prompts for option 1 new 2 saved. Taking option 1 and it loops back to the begining. I have refreshed and sync MWI and also checked the TSP settings and also the Exchange server. Have rebooted Unity and still the issue remains. Any ideas or possible resolves?

    Did you check the phone? is it same from any phone? re create the mail box and see another option.
    Baseer.

  • Voice mail for one user with two extensions

    Environment:
    Cisco Unified CM Administration System version: 7.1.3.30000-1
    Cisco Unity Connection Administration Version 7.1.3.10000-68
    We have a user this year that will be wearing two hats and will have offices in two different locations. I have both extensions as a line on each phone. Now I just need to point both extensions to the same voicemail box or give the user two mail boxes. It seems that CM Administration only supports one voicemail box per user. I think it would be easier for the user to only have to check one mail box by having both extensions point to the same VM. How can I accomplish this?

    Hi Andy,
    Let's say the user has numbers 7005 & 8450 but we want only one mailbox
    @ 7005. There are a couple of ways to do this.
    In CUCM go to> Feature> Voicemail> Voicemail Profile and  create a new Profile called XXXX (whatever name you want) with a  Description called "XXXX username Mailbox" the Voice Mail Box Mask will be 7005> Save
    Then  via CUCM go to the Users Phones> under Directory Number Config for 8450> Voicemail Profile and change to XXXX (created previously in  above steps)>Update>Reset
    Now when a call routes via forward to Unity Connection it will reach the Mailbox @ 7005.
    Or in Unity Connection set up Alternate Extension so that 8450 is an Alternate Extension for 7005 etc.
    Cheers!
    Rob
    "I don't know how, I don't know when
    But you and I will meet again " 
    - Tom Petty

  • Unity: Voice-mail for non-Exchange subscribers

    Hi everyone!
    I have this issue: customer wants to enable voice-mail for non-Exchange users, I've created them as Internet subscribers for using with auto attendant, but I can't enable voice-mail for these extensions, basically the customer does not want for this users to receive the messages in their mail just only check it on IP phones. Is there a possible way???
    Thanks in advance for your help

    To add to Hailey's comment, here's the documentation that explains the behavior/limitations of Internet Subscribers in case you're interested in checking it out:
    http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/networking/guide/ex/5xcunet040e.html#wp1050583
    Hope that helps,
    Brad

  • Outlook Anywhere not working for some users

    Hi All,
    I am having a strange issue today with a customer -
    Outlook Anywhere has been enabled on their Exchange 2010 environment, but it doesn't work for some users.
    Using the ExRCA I have been able to identify the following error on the users who are unable to connect:
    "Testing the MAPI Mail Store endpoint on the Exchange server."
    "Attempting to log on to the mailbox"
    Mailbox logon returned ecLoginPerm 1010. You don't have the correct permissions to log in to the mailbox.
    EMSMDB Status: ecLoginPerm 1010
    Elapsed Time: 225 ms.
    On users that are able to connect it goes through the ExRCA without any issues.
    Any help would be much appreciated.
    Cheers,
    Jack
    Testing the MAPI Mail Store endpoint on the Exchange server.
    An error occurred while testing the Mail Store.
    Additional Details
    Elapsed Time: 333 ms.
    Test Steps
    Attempting to ping the MAPI Mail Store endpoint with identity: outlook.mg.com:6001.
    The endpoint was pinged successfully.
    Additional Details
    Attempting to log on to the Mailbox.
    An error occurred while logging on to the Mailbox.
    Additional Details
    Mailbox logon returned ecLoginPerm 1010. You don't have the correct permissions to log in to the mailbox.
    EMSMDB Status: ecLoginPerm 1010
    Elapsed Time: 225 ms.

    Hi,
    I notice that this issue only impact "some users".
    I suggest double confirm whether the Outlook Anywhere configuration set correctly on Outlook client. Pic as blow:
    Thanks
    Mavis Huang
    TechNet Community Support

  • Like voice mail for iPhone, when are we going to be able to leave Face Time messages when a called party doesn't answer. Seems logical...

    Like voice mail for iPhone, when are we going to be able to leave Face Time messages when a called party doesn't answer. Seems logical...

    I used to be a Telecom technical person for healthcare and legals markets, managing 10s of thousands of voice mail apps and users requests. 
    I wonder where the "suggestion box" is at Apple? 

  • Sharepoint Foundation - search working for some users (or computers), but not others

    Hi all,
    We have doozy of a search problem with SharePoint Foundation 2010 that I'm hoping someone can help with.
    We have an application that is listening on port 14197 and search is working just fine, but only for one or two users.
    If I do a search while logged in using the account we set the application up with then the search works fine and it returns records as expected.
    If I use a different account - one that has full control over the app, then the exact same search fails with the following message:
    We did not find any results for 06BSL.
    Suggestions:
    Ensure words are spelled correctly.
    Try using synonyms or related searches.
    Try broadening your search by searching from a different site.
    Additional resources:
    Get additional search tips by visiting Search Help
    If you cannot find a page that you know exists, contact your administrator.
    We've done everything we can think of, including several procedures to create new search accounts, replace databases, etc.
    Nothing has helped and all of the info we can find online is in relation to getting search working when it doesn't work at all.  In our case it is working, but only for some users.  We thought it might have been a permissions issue, but not matter
    what permissions we seem to give to test accounts they still don't work.  We've set up a test account, for example, that is a member of the 'application owners' group, but cannot produce any search results with it.
    The SharePoint Foundation server is running on Windows 2008 Server Foundation, with a separate SBS 2003 DC.  
    Any help most appreciated.

    Hi Alex, thanks for your response and apologies about the late reply - didn't realise someone had responded until now!
    Agreed that this looks like a permissions issue, but we're stumped as to what it could be.  The 'test' account displays this problem - if we try and search on 06BSL
    we get no results, but it does appear that this account has full control over this document (see below).
    Note that the 'Manage Permissions' page presents a comment 'This list item inherits permissions from its parent. (Customer QA & Product Management)' which is what we're
    expecting.
    The indexing schedule is set to 5 minutes. 
    Appreciate your help with this, as we've spent a huge amount of time on this problem but don't seem to be any closer to a resolution.
    Cheers,
    Damian
    Check permissions result (this result is the same for the list or for the document itself):
    Permission levels given to test (DOMAIN\test)
    Full Control
    Given through the "QA Application Owners" group.
    Design, Contribute, Read
    Given through the "QA Application Members" group. 

  • Adobe Premiere Pro CC launches for some users, but crashes for others.

    I am troubleshooting an issue in a college computer lab. Adobe Premiere Pro CC launches perfectly for some users, but crashes for others. All computers are joined to a domain. The program launches successfully under faculty and admin accounts. It launches under my student account and will launch for some students in the class. There are, however, some students who cannot get the program to launch. Each time it fails when attempting to load ImporterQuickTime.prm.
    For these students, the following error appears:
    Adobe Premiere Pro CC has stopped working
    Check Online for a solution and close the program (Tried this nothing seems to come of it)
    Close the program
    I clicked View problem details
    Problem Event Name: APPCRASH
    Application Name: Adobe Premiere Pro.exe
    Application Version: 7.2.2.33
    Application Timestamp: 532c3999
    Fault Module Name: dvaui.dll
    Fault Module Version: 7.2.2.33
    Fault Module Timestamp: 532bed86
    Exception Code: c0000005
    Exception Offset: 00000000002d31c1
    OS Version: 6.1.7601.2.1.0.256.48
    Locale ID: 1033
    Additional Information 1: 3272
    Additional Information 2: 32722596c6b4441ac0840ed9743cbfbb
    Additional Information 3: 3e22
      Additional Information 4: 3e2260f0a53760c20f23c7e2675c1736
    I did check Quicktime and it is not updated to the most recent version. However, if it was a result of Quicktime not being up to date, why can some accounts launch the program while others cannot. I have also updated the graphics driver on one computer. No change. I compared my student Active Directory account to that of one student who could not launch the program. They are in exactly the same place in AD and therefore have the same permissions on the domain. This is a puzzling issue and the instructor is getting frustrated. Any help or suggestions with this matter would be greatly appreciated.
    -Barb

    I have no idea, other than what I said about the program's design requirement for an Admin account and "sometimes" problems on any other account
    About the only thing I can suggest is a "remote control" chat session... when a student with a non-working account is having problems
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Restrict the posting period opening and closing for some users

    Dear SAP gurus,
    I want to restrict some users to open the posting period and for some users close posting periods. I knew that these can be done through authorization group. Pls explain how to create authorization groups and how to use those?  Anybody can help me out?
    Regards,
    Venkata Reddy

    Dear Venkatareddy,
    There are two sets of period in OB52. The first set of "From" and "To" is for the authorised group and second set is for the non authorised group. In the "Authorisation Group" (last column) give some 4 charecters name. Say "FICO".
    Now ask the basis to attach the object "FICO" for the users who are authorised say user1, user 2 and user3.
    Now in the first set of period you can maintain say 1 2008 to 16 2008 and in the second set 1 2008 to 1 2008.
    So except user1,2 and 3, all the others can post only in 1 2008. Whereas users 1,2 and3 can post in all the periods of 2008.
    Assign points if useful
    regards
    Venkatesh

  • MAM application is not working for some users

    Hi All,
    Tha MAM application is not working for some users.Different users have different workcenters other than that I dont see any other change. When I run MAM30_090_GETLIST in the backend I can see the no of customized users.But I cant see same no of users in the MEREP_207 table for the Syncbo MAM30_090 and strcture id TOP in the middleware. There is a data when I checked under worklist monitor for that user. But neither the MAM application nor MAM data is downloading to that device.
    If I use different user on the same device I can see the MAM application and MAM data.
    What could be the wrong in this case. Any help would be highly appreciated.
    Mobile Client:MI 70 SP 15 Patch 0 Build 200802280918
    Middleware:SAP NetWeaver 2004s with Patch leve 15
    Backend:SAP ECC 6.0
    Application:MAM 3.0
    Thanks and Regards,
    Ameer.

    Hi,
    from your description the source of your issue is quite obvious: some of the MAM users configured in spro are not configured properly.
    For T01 SyncBos the number of TOP records in merep_207 MUST be the same as number of headers returned by an appropriate getList FM in the backend.
    You need to solve this before you can go any further.
    Reason why a record is not recorded in MEREP_207 - getdetail failed for whatever reason. So execute MAM30_ML_getdetail for each of the users that is not replicated in the middleware and check if there are errors in RETURN table. If there is no error - one of the common reason for replication fail is when there are records in item tables that have duplicate primary keys.
    Regards,
    Larissa Limarova

  • How to Block Account member in input reporting for some users?

    Hi experts, i need to know if is possible to block input of values for some Users in the Account Dimension so that some users can input value in the report but other user cant do it.
    I try to do this from "member access profile" but this option only allow you to define access right for one specifict parent o member.
    I mean, is posible to asigned to Account Dimension a Propertie type "OWNER" like ENTITY?
    For example: one user must to input value for the Account member "CASH", but other user dont, however i have to show the same input reporting for both users.
    I hope understand the question, im sorry about my english
    thank you in advance
    Ignacio Vazquez

    I would think you could do one of the following:
    Either set account as a secured dimension.  You would then define security profiles for all account groups and assign those to your users / teams as appropriate.  Would take a while to setup initially, but if your users don't change that much it shouldn't be too difficult to manage once it's done.
    Setup different input templates that only showed the accounts you wanted each group of users to see.  Put the templates in different site folders and assign access to those sites as required.  users would then only have access to open the template applicable to them.  Would require that you basically make duplicate copies or your current template, modify and save to different site folders which could become a pain if the template requires changes (since you would now have to make the same change multiple times).
    Setup a macro in the current template so that you need to enter a password to unlock the send commands for the respective accounts.  I don't know if it can be setup to support multiple passwords - assuming it can, password 1 would unlock all accounts, password 2 would only unlock CASH accounts, password 3 would only unlock LIABILITY accounts, etc.  You then distribute the passwords to the users as appropriate.
    Hope that helps.

  • How to restrict access to views for some users in the app?

    Hi SDN!
    I have an WD application wich embedded in the portal. Appication has 2 iViews (and 2  pages respectively). These iViews consist several views connected with each other (e.g. one view provide list data, second view is add/edit form for this data). I need to restrict access for some users for view with add/edit form. I can't make separate page for this view.
    What I've done:
    1) create yet another UIContainer for this view in main window and embed view to this container. It was be done for create separate iView for form.
    2) in the portal I create iView for this form but don't embedd in any page.
    When I try to call my form from list data (that is one iView from another) I get exception:
    <b>com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: duplicate usage of view .MyCarRentalAddCity</b>
    Is there a way to get needed functional?
    Thanks,
    Lev

    Hi,
    do you need to remove the IView from the portal menu or do you just want to make a View container in your WD application invisible if the user doesn't have the rights to see it.
    If so, you could create your own roles on the app server:
    You need to create a new class that extends NamePermission like:
    import com.sap.security.api.permissions.NamePermission;
    public class ApplicationAccessPermission extends NamePermission {
               * @param name
              public ApplicationAccessPermission(String name) {
                   super(name);
               * @param name
               * @param action
              public ApplicationAccessPermission(String name, String action) {
                   super(name, action);
    Also, you have to create an Action.XML file that looks like this:
    <BUSINESSSERVICE
         NAME="com.vendor.administration">
         <DESCRIPTION
              LOCALE="en"
              VALUE="actions view usage"/>
         <ACTION
              NAME="View Permission">
              <DESCRIPTION
                   LOCALE="en"
                   VALUE="Show view"
                   />
              <PERMISSION
                   CLASS="com.vendor.utilities.ApplicationAccessPermission"
                   NAME="ShowView"
                   />
         </ACTION>
    </BUSINESSSERVICE>
    If you have created these to files in your packages, you can access this function like:
    IUser user ;
    try {
              user = WDClientUser.getCurrentUser().getSAPUser();
              if(user.hasPermission(new ApplicationAccessPermission("Show view"))){
                   wdContext.currentV_UIElement().setViewVisibility(WDVisibility.VISIBLE);
              }else{
                   wdContext.currentV_UIElement().setViewVisibility(WDVisibility.NONE);
         }catch (WDUMException e1) {
              wdContext.currentV_UIElement().setViewVisibility(WDVisibility.NONE);
                    e1.printStacktrace();
    You have to bind the ViewVisibility attribute of the context to the View Container you want to hide.
    The applicationAccessPermission you defined in the XML File will be visible in the UME Manager of you J2EE engine. With this action you can create a new role and group that you can map to the users that should see you view.
    But, the exception you get is because you have embedded one view twice, which is not possible.
    Hope this helps.
    Regards,
    Dennis

  • Special characters in SBWP dynamic columns are not showing for some users

    Hi experts,
    We have set up a dynamic columns for business workplace. One of the field displays the comments entered by the user. Some users are able to see the values entered perfectly. But for some users, if we enter special characters like @gopal, it is not displaying the value in dynamic column.
    Are there any workflow/user settings need to be changed.
    Thanks
    Gopal

    I had the same issue, you should check the link between AD and CRM, so you could make a new user in AD and connect your CRM account with it, then you should return the old AD account back. It worked for me, try it :)

  • PPT unable to open in browser for some users

    PPT unable to open in sharepoint browser for some users? 

    Hi,
    If the issue only occurs to some users not all, I’d recommend you check client issue and permission issue. For client issue, you could try compatibility view in IE.
    If there is more than one WFE servers in your environment, then please ensure SharePoint Shared Services is started on all WFE servers.
    Here is a link which provides solution to similar issue, for your reference:
    http://support.microsoft.com/kb/2028346/en-us
    If it doesn’t work, please provide more specific information about error message to narrow down the issue.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Deactivate Attachment List in ME22N for some users

    Hi,
    we are adding some documents for the standard PO in ME22N. Our director's command is :
    These attachments can't be seen to some of users. So for some users I have to deactivate the Attachmnent List menu button in ME22N. How can I do it?

    Is there any other way? Can I use a BADI and which and how? I study classes CL_GOS_MANAGER and CL_EX_ME_PROCESS_PO_CUST with some their methods. But I can't find th exact solution to my problem.

Maybe you are looking for