Jalopy installation problem with JDeveloper

I've followed the installation steps for Jalopy.
1. unzipped file (got lib and doc dir)
2. copied all jars under lib to JDev/lib/ext
3. restarted JDev
However, I don't see the format menu on the navigation bar nor from Tools->Preferences.
Is there another setting or plug-in installation that I need to do?
Thanks for your help
Ariela

at a guess you only need jalopy-jdeveloper-1.1.1 in the ext directory, two version are probably causing confusion
I'm happily using 1.1.1 with no problems. However 1.1.1 is a new version for jdeveloper v9.3, and may not work
for earlier versions
Regards

Similar Messages

  • Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system

    We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
    Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
    Using console, after installation we obtain following errors:
    Installing Siebel Enterprise Server. Please wait...
    unable to launch: "ksh export
    LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
    MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
    "236"(SBL-STJ-00152)
    LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
    REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
    error code: "236"(SBL-STJ-00152)
    LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
    LANG=ENU MODE=LIVE
    MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
    "236"(SBL-STJ-00152)
    Running command :
    ./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
    Infinite loop of following error pops out:
    An error occurred during wizard bean change notification:
    java.lang.NoClassDefFoundError
    at ConfigInitialize.execute(ConfigInitialize.java:21)
    at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
    Is there any clue how this error can be solved??
    Thanks in advance!!
    Gordon
    Message was edited by:
    user605023

    I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
    /net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
    -bash-3.00$ ./setuplinux -is:javaconsole -console
    Initializing InstallShield Wizard........
    Initializing InstallShield Wizard........
    Launching InstallShield Wizard........
    0% 25% 50% 75% 100%
    Welcome to the InstallShield Wizard for Siebel Enterprise Server
    The InstallShield Wizard will install Siebel Enterprise Server on your
    computer.
    To continue, choose Next.
    Siebel Enterprise Server
    Siebel Systems
    Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
    Siebel Enterprise Server Install Location
    Please specify a directory or press Enter to accept the default directory.
    Directory Name: [siebel] /slot/ems1115/appmgr/20405
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Please select the products you wish to install.
    [ ] 1 - Gateway Name Server
    [ ] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]: 1
    [X] 1 - Gateway Name Server
    [ ] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]: 2
    [X] 1 - Gateway Name Server
    [X] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]:
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Configuring uninstallers. Please wait...
    0% 25% 50% 75% 100%
    Choose the setup type that best suits your needs.
    [X] 1 - Typical
    [ ] 2 - Compact
    [ ] 3 - Custom
    To select an item enter its number, or 0 when you are finished: [0]
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Please select the languages you wish to install.
    [X] 1 - enu - English (American)
    [ ] 2 - fin - Finnish
    [ ] 3 - kor - Korean
    [ ] 4 - cht - Chinese (Traditional)
    [ ] 5 - ita - Italian (Standard)
    [ ] 6 - esn - Spanish (Modern)
    [ ] 7 - deu - German (Standard)
    [ ] 8 - chs - Chinese (Simplified)
    [ ] 9 - tha - Thai
    [ ] 10 - dan - Danish
    [ ] 11 - heb - Hebrew
    [ ] 12 - fra - French (Standard)
    [ ] 13 - nld - Dutch (Standard)
    [ ] 14 - ptb - Portuguese (Brazilian)
    [ ] 15 - csy - Czech
    [ ] 16 - jpn - Japanese
    [ ] 17 - ptg - Portuguese (Standard)
    [ ] 18 - ara - Arabic (Sa`udi)
    [ ] 19 - sve - Swedish
    To select an item enter its number, or 0 when you are finished: [0]
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    {color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
    selected configuration. Please free up "766446" KB on drive
    *"/slot/ems1115/appmgr/20405" before continuing.*{color}
    -bash-3.00$ pwd
    /slot/ems1115/appmgr/20405
    -bash-3.00$ df -h .
    Filesystem Size Used Avail Use% Mounted on
    sdc1002nap-vlan1:/vol/ems_39426_1115
    71G 55G 17G 77% /slot/ems1115

  • HT4623 How can i solve installation problem with iOS 6.

    How can i solve installation problem with iOS 6. I've tried to install it on my iPhone 4 but nothing turned out. Thanks in advance!!!!

    can you connect your device to Tiunes and check to see if there are any files in
    OSX: ~/Library/Logs/Crashreporter/Mobiledevice/<Devicename>/
    Windows: %appdata%\Apple Computer\Logs\Crashreporter\MobileDevice\<Devicename>
    specifically named OTA......
      Also for the failed itunes restore please attach the contents of the latest log in
    OSX:   ~/Library/Logs/<iphone or ipod or ipad> updater logs
    Windows: C:/User/ Appdata/Roaming/iTunes/<iphone or ipod or ipad> updater logs

  • Software Installation Problems with Media Source and Nomad Explo

    Hello Creative Users,
    recently I had to reinstall my operating system on the PC. I have an IBM Thinkpad R30 with a Sitecom USB2.0 pccard. I am running WinXP Pro SP2 with all latest updates.
    I have a Nomad Jukebox Zen Xtra with Firmware .20.08 and an update harddri've of 80GB.
    As long as I was running the software on my previous installation everything worked fine.
    I installed the driver .26.02. This recognized the Jukebox. Musicmatch is able to communicate to the Jukebox and recognizes all files on it.
    When I installed Nomad Explorer I got an error ctregserv failed because ctin...dll is not found.
    When I tried to install Media Source from the original disk it showed an error after 30% Media Source not found. Install Media Source before continuing.
    This is what I received now with all verisons of Media Source and Noamd Explorer incl. .30.0.
    Can someone help me as synchronizing with Musicmatch is a pain.
    Thanks
    Rolf

    Hi everyone,
    as I saw many questions regarding installation problems with Mediasource or Nomad Explorer
    in this forum I will answer my own question right here. I was pointed to the answer by a friend with a similar problem on some other software.
    When trying to install the Creative software under WinXP SP2 I happens that the registration does not work. the reason are missing write attributes to the keys for
    Creative software. To correct that go to: Start, Run and enter regedit. Hit ok and you are in the registration editor.
    Find the Creative location unde HKEYS_SOFTWARE. Click right mouse button and choose
    properties.
    Check full access for your user as well the system user. click on advanced and mark both all the users you want to install from. Check the lower box below the user window sayin something about roghts being propagetd to lower folders etc. Cklick conform and ok, click confirm on previous screen and close regedit.
    Now you should be ok and able to install.
    Regards
    Rolf

  • MOVED: Installation Problems with PM8M2-V

    This topic has been moved to Intel P4 & Celeron P4 based board.
    Installation Problems with PM8M2-V

    port 1. I did try it on port 2. The odd thing is that this mobo is the first that I have seen where SATA is not recognized in the BIOS setup.
    I did solve the problem, though. I bought a Via chipset mobo from a different manufacturer. I was tired of spending hours on this project and the fact that MSI tech support told me that it was Microsoft's problem was no help. I didn't want to create a separate drive image of this one mobo. The fact is that MSi created a mobo that required loading additional drivers for SATA to be recognized- I have not worked with any other manufacturer who required additional drivers loaded to work with SATA (a drive standard). 
    The new mobo fired right up, recognized the SATA, and I was able to Sysprep the PC in no time. Case solved!

  • Problem with  Jdeveloper Embedded OC4J  XML parsing

    Hi all,
    I am having a problem getting jdeveloper to work well. If I use jdeveloper to build the WAR file for my app and I deploy to Tomcat, the app runs fine with no error.
    However, if I try to run my app within the jdeveloper, I get this error -
    08/06/10 19:11:10 com.ibatis.dao.client.DaoException: Error while configuring DaoManager. Cause: java.lang.RuntimeException: XML Parser Error. Cause: oracle.xml.parser.v2.XMLDOMException: invalid character [ in name
    Caused by: java.lang.RuntimeException: XML Parser Error. Cause: oracle.xml.parser.v2.XMLDOMException: invalid character [ in name
    08/06/10 19:11:10 at com.ibatis.dao.engine.builder.xml.XmlDaoManagerBuilder.buildDaoManager(XmlDaoManagerBuilder.java:112)
    08/06/10 19:11:10 at com.ibatis.dao.client.DaoManagerBuilder.buildDaoManager(DaoManagerBuilder.java:47)
    I have tried to turn off XML parsing within Jdeveloper but no luck. I don't understand why jdeveloper will be trying to implicitly parse the XML doc, and wont even do it well.
    Is there a way I can turn off Embedded OC4J XML parsing ? and let it just use the parser in the application ? I mean Tomcat works fine with this application.
    Please help !

    I think maybe you use wrong adf lib when deploying your project to the OC4J.
    You can update your oc4j in the jdev.[JDEV->Tools->ADF Runtime Installer-> Standalone OC4J].
    Good luck
    Hart

  • Installation problem with NW'04 SR1: database connection failed

    Hi all,
    while installing NW '04 SR1 on Windows Server 2003 SP1 and MS SQL Server 2000 SP4 I ran into an error related to the database connection. While performing the step "Load Java Database content" SAPinst crashes with the message
    com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
    The connection to the SLQ Server with e.g. the Query Analyzer is OK. I had a problem with this installation setup before (have a look at the corresponding <a href="https://forums.sdn.sap.com/thread.jspa?threadID=338638&tstart=0">thread</a> ), the JDBC drivers where missing on the installation master but after copying them in the right direction the installation went on with no problem up to this point...
    Has anybody an idea what could have happened here? Is this maybe a problem connected to the one I recently had
    Below I attached the sapinst.log and jload.log with more detailed messages.
    sapinst.log ###########
    INFO 2007-03-12 22:06:24
    Working directory changed to C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST.
    INFO 2007-03-12 22:06:24
    Output of D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' is written to the logfile C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST/jload.java.log.
    WARNING 2007-03-12 22:06:26
    Execution of the command "D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'" finished with return code 1. Output:
    java version "1.4.2_13"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
    Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
    12.03.2007 22:06:25 com.sap.inst.jload.Jload main
    INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
    12.03.2007 22:06:26 com.sap.inst.jload.Jload main
    SCHWERWIEGEND: couldn't connect to DB
    com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
    ERROR 2007-03-12 22:06:26
    CJS-20065  Execution of JLoad tool 'D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'' aborts with returncode 1. Check 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' and 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.java.log' for more information.
    jload.log ###########
    12.03.07 22:06 com.sap.inst.jload.Jload main
    INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
    12.03.07 22:06 com.sap.inst.jload.Jload main
    SEVERE: couldn't connect to DB
    com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
    Best regards,
    Bernd

    Hello Kairat,
    Please follow the below mentioned guide to install it.
    Check all the parameters to set and run pre requisite checker before starting installation.
    Keep in mind that before starting any SAP installation you should always run prerequisite checker.
    https://websmp205.sap-ag.de/instguides --> SAP Netweaver -->SAP Netweaver 7.0 -- > Installations --> EHP2
    Regards,
    Amit Barnawal

  • Hyperion planning installation(Problem with application server deployment)

    Hi There:
    I am new to hyperion planning.I am trying to install planning.I got problem with Hyperion Configuration utility while configuring application server deployment.Its show message failed.Please guide me how to fix this.If it is possible can you please send me any personal documentation on installation.I am trying this for past 4 day's.Below is the error its showing in configtool
         ... 10 more
    (Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, INFO, Validating dependencies...
    (Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel$5, DEBUG, Product: Planning; Dependencies: []
    (Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, DEBUG, task to execute: HspDBPropertyLocation
    (Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, DEBUG, task to execute: applicationServerDeployment
    (Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.PanelEventDispatcher, DEBUG, constructor
    (Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, AppServerSelectionPanel in queryEnter
    (Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: WebLogic 8.1; deployment type = both
    (Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: WebSphere 5.1; deployment type = both
    (Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: Tomcat 5.0.28; deployment type = both
    (Mar 09, 2008, 08:26:08 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, AppServerSelectionPanel in queryExit
    (Mar 09, 2008, 08:26:08 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, DEBUG, AppServer selected: WebLogic 8.1
    (Mar 09, 2008, 08:26:08 PM), com.hyperion.cis.config.wizard.ProductCustomInputPanel, ERROR, Error:
    java.lang.NullPointerException
         at com.hyperion.cis.config.wizard.ProductCustomInputPanel.queryEnter(ProductCustomInputPanel.java:88)
         at com.installshield.wizard.awt.AWTWizardUI.currentBeanChanged(Unknown Source)
         at com.installshield.wizard.swing.SwingWizardUI.currentBeanChanged(Unknown Source)
         at com.installshield.wizard.StandardWizardListener.currentBeanChanged(Unknown Source)
         at com.installshield.wizard.Wizard$RunThread.run(Unknown Source)
    (Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.AppServerDeployer, DEBUG, Starting WebLogic 8.1 deployment...
    (Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.AppServerDeployer, DEBUG, pre-Deploy: Planning
    (Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.AppServerDeployer, DEBUG, Deploy: Planning
    (Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
    java.lang.NullPointerException
         at com.hyperion.cis.config.AppServerDeployer.initContexts(AppServerDeployer.java:628)
         at com.hyperion.cis.config.AppServerDeployer.deploy(AppServerDeployer.java:548)
         at com.hyperion.cis.config.AppServerDeployer.deploy(AppServerDeployer.java:526)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDeployerTask(RunAllTasksWizardAction.java:251)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:156)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    (Mar 09, 2008, 08:26:13 PM), com.hyperion.cis.config.wizard.CustomSummaryPanel, DEBUG, CustomSummaryPanel in queryExit
    Please help me.Email id:[email protected]
    Thanks
    Harsha.
    Message was edited by:
    user603943

    I think the installation of planning on Vista is difficult. As some of the files doesn't support even i am tired of doing that.
    But tell me one thing have you installed all other products , I mean Essbase, (server, client) , AAS and Shared services.
    Are they working good .
    I have formatted my system to XP and installed everything , but the problem is when i install planning it prompts me that IIS 5 should be greater other wise EPM will not install...
    there are lot of things with planning 1) i can't datasource as it is not highlighting when we configure with Shared services
    2) It does not create product instance .
    If any one can fix this thing by giving me a suggestions.
    Advance Thanks

  • IDES installation problem with DDIC password

    Hello everybody,
    After hours of searching and trying..
    I have here a problem during a local installation of IDES ECC 6.0 on Windows Server 2008 with MAXDB. The installation stops in phase 27 of 29 u201Ccheck DDIC passwordu201D - test logon to SAP system failed, with the error message FRF-00007 "Unable to open RFC connection" in sapinst.
    The MMC shows in the process list that the following processes stands oon "green": igswd, mag_Server and disp+work are running. The message of servers connection is OK, acts dialogue queue time is 0.00 sec.
    I have already searched the forum, but I am not able to logon as user SAP* with u201C060. u2026u201D or as user DDIC with the password u201C199. u2026u201D to change the DDIC password to my password set during the installation (transaction -S000 / SU01). The login fails over the MMC as well as over the SAP GUI 7.10. I have tried this on the client 000, 001 and 800. The error message is u201CSAP Logon Failed - connection closed without message (CM_NO_DATA_RECEIVEDu201D). The SAP GUI gets down with "Work process restartet, session terminated".
    What can help to solve the problem? Can it be a problem with the ms loop adaptor? Which static address IP must assign to the loop adaptor? Did i have to update the kernel of the data bank or is this not necessary? Can the information from dev_w help?
    Can this link help me: BI 7.0 Installed but errored out during DDIC password check !!!!!!!
    Thanks in advance
    Lenvy
    Edited by: Lenvy Gee on Sep 6, 2009 2:30 AM
    Edited by: Lenvy Gee on Sep 6, 2009 2:34 AM

    Good Morning everybody,
    I started a next try, the mmc is running on green, the login starts up and......failed.
    So the network setting seems to be correct.
    The log files included following:
    ..........................................(just the last lines).............................

    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server BASIS_A23_00 on host BASED (wp 0)
    M  *  ERROR       ThSigHandler: signal
    M  *
    M  *  TIME        Mon Nov 26 08:06:26 2009
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          11
    M  *  MODULE      thxxhead.c
    M  *  LINE        10688
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************

    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
    M  TrThHookFunc: called for WP dump
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  ThrSaveSPAFields: save spa fields
    M  Entering ThSetStatError
    M  ThIErrHandle: incomplete previous roll out, do a full roll out
    M  ThRollOut: roll out T17/U25/M0/I0 (level=7, short_roll_out=0)
    M  ThRollOut: call rrol_out (1)
    M  ThRollOut: act roll state = DP_ROLLED_OUT
    M  ThRollOut: roll level <> 0, don't call ab_rollout
    M  ThRollOut: full roll out of U25 M0 I0 (Level 7) ok
    M  ThIErrHandle: prv_action of W0: 0x8
    M  ThCallDbBreak: use db_sqlbreak
    C  CANCEL rejected, because there is no SQL statement active
    M  ThIErrHandle: don't try rollback again
    M  ThIErrHandle: call ThrCoreInfo
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    M  ThContextId: context_id = >0001700020019C010D31F2D5BD12D1714B103838<
    M  ThContextId: context_id_uuid = {29019C01-7F24-F235-BD12-D1714B103838}
    M  ThGetTransId2: got trans id (spa) >29019C017F24F239BD12D1714B103838< (32)
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    M  RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 000000000F67D3C8/0000000000000000/0/0/1
    M  RmCleanUpResources3: no resources registered
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RABAX: end RX_RETURN
    M  ThIErrHandle: ThrCoreInfo o.k.
    M  ThIErrHandle: Entering ThReplyToMsg
    M  ThIErrHandle: Entering ThErrHdlUser
    M  ThErrHdlUser: set th_errno (11)
    M  ThErrHdlUser: save context
    M  ThEmContextDetach2: detach T17/M0 from em memory (em_hdl=0, force=0)
    M  ThEmContextDetach2: reset local em info
    B  Disconnecting from ALL connections:
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       YES YES NO  000 255 255 20401126 080533 BASIS          
    C  Disconnecting from connection 0 ...
    C  Now I'm disconnected from SAP DB
    B  Disconnected from connection 0
    B  statistics db_con_commit (com_total=4, com_tx=0)
    B  statistics db_con_rollback (roll_total=1, roll_tx=0)
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 816) [dpnttool.c   327]
    M  return from clean-up function ...
    and:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      00
    sid        A23
    systemid   562 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    144
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        2928
    Mon Nov 26 08:03:01 2009
    kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 2928) [dpxxdisp.c   1243]
         shared lib "dw_xml.dll" version 144 successfully loaded
         shared lib "dw_xtc.dll" version 144 successfully loaded
         shared lib "dw_stl.dll" version 144 successfully loaded
         shared lib "dw_gui.dll" version 144 successfully loaded
         shared lib "dw_mdm.dll" version 144 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    Mon Nov 26 08:03:10 2040
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 9 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5371]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >BASIS_I23_00                            <
    DpShMCreate: sizeof(wp_adm)          25168     (1480)
    DpShMCreate: sizeof(tm_adm)          5652128     (28120)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    DpShMCreate: sizeof(comm_adm)          552080     (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1864)
    DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000D800050, size: 6348592)
    DpShMCreate: allocated sys_adm at 000000000D800050
    DpShMCreate: allocated wp_adm at 000000000D802150
    DpShMCreate: allocated tm_adm_list at 000000000D8083A0
    DpShMCreate: allocated tm_adm at 000000000D808400
    DpShMCreate: allocated wp_ca_adm at 000000000DD6C2A0
    DpShMCreate: allocated appc_ca_adm at 000000000DD72060
    DpShMCreate: allocated comm_adm at 000000000DD73FA0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 000000000DDFAC30
    DpShMCreate: allocated gw_adm at 000000000DDFACB0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 000000000DDFACE0
    DpShMCreate: allocated wall_adm at 000000000DDFACF0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    <ES> Info: em/initial_size_MB( 4093MB) not multiple of em/blocksize_KB( 4096KB)
    <ES> Info: em/initial_size_MB rounded up to 4096MB
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 1023 blocks reserved for free list.
    ES initialized.
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1633]
    ***LOG Q0K=> DpMsAttach, mscon ( BASIS) [dpxxdisp.c   11822]
    DpStartStopMsg: send start message (myname is >BASIS_I23_00                            <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    Mon Nov 26 08:03:11 2040
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 144
    Release check o.K.
    Mon Nov 26 08:03:17 2040
    MBUF state ACTIVE
    DpModState: change server state from STARTING to ACTIVE
    Mon Nov 26 08:04:26 2040
    SoftCancel request for T17 U18 M0 received from IC_MAN
    SoftCancel request for T19 U20 M0 received from IC_MAN
    ERROR => DpWpKill(3092, SIGUSR2) failed [dpxxtool.c   2496]
    Mon Nov 26 08:04:30 2040
    ERROR => DpHdlDeadWp: W0 (pid 3200) died [dpxxdisp.c   14532]
    Mon Nov 26 08:04:31 2040
    ERROR => DpHdlDeadWp: W1 (pid 3220) died [dpxxdisp.c   14532]
    DpHdlDeadWp: restart wp (pid=3092) automatically
    ERROR => DpHdlDeadWp: W3 (pid 3296) died [dpxxdisp.c   14532]
    DpHdlDeadWp: restart wp (pid=3268) automatically
    ERROR => DpHdlDeadWp: W10 (pid 2032) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W15 (pid 3312) died [dpxxdisp.c   14532]
    Mon Nov 26 08:04:45 2040
    ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c   6971]
    Mon Nov 26 08:05:10 2040
    ERROR => DpHdlDeadWp: W4 (pid 3260) died [dpxxdisp.c   14532]
    Mon Nov 26 08:05:30 2040
    ERROR => DpHdlDeadWp: W0 (pid 3788) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W1 (pid 2108) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W6 (pid 3108) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W15 (pid 464) died [dpxxdisp.c   14532]
    Mon Nov 26 08:05:33 2040
    ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c   6971]
    The kernel is not patched. I just (try) to install the kernel files from the sap market place
    IDES download destination. The install kernel file was: 51033508_7 - NW7 SR3 Kernel 7.00 for Windows / LNX X86_X64. I got an update / upgrade file, which is called: 51033508_8 - NW7 SR3 Kernel .... Upg ABAP.
    Can anybody give me an adwise by reading those logfiles? Is the file ok for updating the kernel?
    How do I upgrade the kernel by having no .exe - file?  May the installation go on after patching the kernel?
    Thanks you really much
    Lenvy

  • Installation problems with Solaris 8 on Intel

    Howdy,
    I am having some problem with my installation of Solaris 8 on Intel. I am installing the system on a P133 (Asus TX97 motherboard). When I first start the installation and perform the system scan I get the following error:
    The PnP ISA: IDE Controller programable device was unable to be programmed.
    This could be caused by two possible reasons:
    - Lack of resouces available
    - There is a conflict with the following already-existing device: 8086,7111 - Bus Mastering IDE Controller
    When I bring up the View/Edit device settings and I scroll to the IDE controller there is an ! mark beside the PCI IDE controller. The controler is specifying: Bus 0, device: 1, function: 1 port 1F0-1F7, 3F6, 170-177, 376, E000-E00F, 0 IRQ 14, 15
    Does anyone have any suggestions on how to resolve this conflict? I tried removing the PCI IDE interface and then installing a ISA IDE interfact (for IRQ: 14, IRQ 15 automatically put a PnP IDE controller there). This seemed to resolve the conflict but then I received a: No Bootable devices have been found.
    If anyone can help out with how to resolve the conflict, or what the No Bootable Devices have been found error it would be greatly appreciated.
    Currently there is a partition set up with NT on it, but I wish to basically get rid of everything on the HD and install Solaris on it. FYI, when I check the HD's in NT it mentions I/0: 1F0-1F7 IRQ 14 and also I/O 170-177 IRQ 15.
    Any help would greatly be appreciated.
    Regards,
    S.

    When I close down Solais in the CDE I am taken back to the logon screen
    and I turn the PC off.Don't do that. If you simply turn off the PC, the OS has no chance to
    write back cached / modified disk data back to the HDD - this is also the
    reason why solaris has to check the filesystems on the next boot and apparently
    has to repair filesystem defects.
    What you have to do is shutdown the machine, before you can power it off.
    Login as user "root" and use the command
    init 5
    or
    halt
    "init 5" will shutdown system services, by executing commands from
    /etc/rc0.d/K* with argument "stop". Then it'll sync all modified disk blocks to
    the HDD, kills all remaining processes and unmounts all filesystems. In this
    state it's safe to power off the machine!
    "halt" is a quick-and-dirty shutdown. It does not stop system services (the
    /etc/rc0.d/K* commands are not run). But, it syncs all modified disk blocks
    to the HDD, kills all processes and unmounts all filesystems. "init 5" is preferred,
    especially if you have services like a database server running on the machine,
    which needs to be cleanly shutdown. On the other hand, with a default solaris
    installation and no extra services, a simple "halt" should be OK.
    Btw. if multiple users are logged in on the machine, you should also have a look
    at the shutdown(1M) command. "shutdown" sends warnings to the logged in
    users that the machine is about to be shut down, ...

  • Installation Problem with APEX 3.1 on 11g

    Hey,
    I've a big problem with apex3.1 on 11g. Yesterday i wanted to install the new version, which i've downloaded from the oracle server. Furthermore i have followed the instructions by the documentation.
    i executed:
    1. apexins.sql FLOW_1 USERS TEMP /i/ Is that correct?
    2. apxconf.sql
    Do i have do remove the old version (3.0)?
    Thanks for your help
    Best Regards,
    Andi

    Hi Andrea,
    I tried to reproduce this and could not.
    I created a new 11.1.0.6 database on Oracle Enterprise Linux with character set WE8MSWIN1252. I even did this with an OS locale of Italian (and trust me, it was a struggle, as my Italian is about as weak as my German). The only thing that is different between my test and your configuration is the server OS.
    I then installed APEX 3.1, tried it in browser language 'it' and 'en-us', but I could not reproduce the issue.
    Can you think of anything atypical in your configuration, installation, or database parameter settings?
    Joel

  • Oracle 9i installation problem with RedHat 7.2 (segmentation violation)

    I have try to installation 9i with RedHat 7.2 by x windows.
    when i use xwin to run the "./runInstaller, i got the error
    (segmentation) as below:
    i have already try to follow the installation procedure in
    http://staff.in2.hr/denis/oracle/901install_rh72_en.html#1 but
    still got this error.
    Can anyone help me??
    Regards
    Chris Sung
    =================================================================
    ===============
    oracle install
    Connecting 192.168.1.3 via TELNET
    Thursday, December 13, 2001 1:04:06
    Red Hat Linux release 7.2 (Enigma)
    Kernel 2.4.7-10 on an i686
    login: oracle
    Password:
    Last login: Thu Dec 13 00:46:39 from apple
    [oracle@orange oracle]$ (/home/oracle/Disk1/runInstaller -
    display 192.168.1.2:0
    -name "oracle install" &)
    [oracle@orange oracle]$ Initializing Java Virtual Machine
    from /tmp/OraInstall/jre/bin/jre. Please wait...
    SIGSEGV 11* segmentation violation
         stackbase=0xbffff298, stackpointer=0xbffff160
    Full thread dump:
    "Finalizer thread" (TID:0x4276d210, sys_thread_t:0x4d0bfe0c,
    state:R) prio=1
    "Async Garbage Collector" (TID:0x4276d258,
    sys_thread_t:0x4d09ee0c, state:R) prio=1
    "Idle thread" (TID:0x4276d2a0, sys_thread_t:0x4d07de0c,
    state:R) prio=0
    "Clock" (TID:0x4276d088, sys_thread_t:0x4d05ce0c, state:CW)
    prio=12
    "main" (TID:0x4276d0b0, sys_thread_t:0x80d6fe8, state:R)
    prio=5 *current thread*
         java.lang.System.initializeSystemClass(System.java)
    Monitor Cache Dump:
    Registered Monitor Dump:
    Thread queue lock: <unowned>
    Name and type hash table lock: <unowned>
    String intern lock: <unowned>
    JNI pinning lock: <unowned>
    JNI global reference lock: <unowned>
    BinClass lock: <unowned>
    Class loading lock: <unowned>
    Java stack lock: <unowned>
    Code rewrite lock: <unowned>
    Heap lock: <unowned>
    Has finalization queue lock: <unowned>
    Finalize me queue lock: <unowned>
    Dynamic loading lock: <unowned>
    Monitor IO lock: <unowned>
    Child death monitor: <unowned>
    Event monitor: <unowned>
    I/O monitor: <unowned>
    Alarm monitor: <unowned>
         Waiting to be notified:
         "Clock" (0x4d05ce0c)
    Monitor registry: owner "main" (0x80d6fe8, 1 entry)
    Thread Alarm Q:

    Strange, but yesterday I nter in Oracle9i install, open
    gnome-terminal window as oracle user and simply type
    /tmp/Disk1/runInstaler
    the DISPLAY enviroment variable was set,
    using RedHat 7.2 , kernel 2.4.16-0.9, glibc-2.2.4-19
    Segmentation violation 11 may mean RAM problem, sometimes
    incorrect program pointer.So I think it must work (runIstaler)

  • Flash player 11.0.1.152 installation problem with Windows Vista 64-Bit

    Hello,
    I just can't get Flash Player to install on my computer with Windows Vista 64-Bit - doesnt matter if I try with Firefox, Opera or IE (I usually use Firefox).
    The download isn't a problem, but when I start the downloaded .exe, this file just disappears from my download folder and nothing happens - besides starting a process called install_flashplayer11x32_mssd_aih_3.exe, which does nothing. The usual installation popup never appears. After that I can't try starting the installation again, until disabling the process via task manager ("Only a single instance of this application may run"). Doesn't matter if I try the download and installation with or without "McAffe Security Plus" btw - same result.
    I never had such a problem before - Flash Player 10.3 was and is no problem to install and use.
    I have tried all the measures suggested in the troubleshooting section on the official site, including the advanced troubleshooting measures (uninstall old version, run as administrator, disabling software firewalls, disabling virus scanner etc.). Nothing helps.
    I don't got those problems with my laptop running Windows 7 - just my desktop computer with Vista 64-Bit.
    Any help would be greatly appreciated.

    Try using the installers from the links in http://forums.adobe.com/thread/909550
    P.S. topic moved to the Installation section of the forum.

  • Installation problems with Windows

    Hi,
    I have the windows 7 beta and have been trying to reinstall it on my boot camp partition, however the installation continually reports a corrupt CD. I know that the CD is not corrupt because i have successfully installed Win7 beta on a boot camp drive before and on other computers. I have even tried on VMware and had the same error. The things that strikes me the oddest problem is that it always has the error at the same point of the installation e.g. 97% of expanding files. I have also tried installing a working Vista OS on boot camp and WMware and still had the same error. This leads me to believe a problem with the iMac's SuperDrive. I have run tests using tech tool pro and drive genius and had no anomalies. Any further steps to diagnose or a solution would be helpful, thank you.

    I don't know about using Windows 7 Beta with Boot Camp. You may want to post that question in the category for Boot Camp.
    http://discussions.apple.com/category.jspa?categoryID=237
    However, I have messed around with using Windows 7 Beta under VMware Fusion. It works, with some graphical anomalies when the virtual machine is starting up. When I install a new OS into a VMware Fusion virtual machine, I always use the option to install from a disk image file, instead of a physical disc. That would avoid any issues you have there with your physical disc.
    To do so, click the New button and then +Continue without disk+. Then +Use operating system disk image file+ and select the disk image file. In your case, that would be the Window 7 Beta .iso file that you downloaded. I told the VMware Fusion I was installing Windows Vista.
    (Incidentally, I am using the 64-bit version. If your iMac is Core 2 Duo, you can. Don't know if that you make a difference in the Beta working or not working.)
    To test the drive itself, you may want to start up from your Mac OS X installation disc and get to the Installer. From there, you can try running Disk Utility from the Utilities menu. While you are there in Disk Utility booted off another system, you might as well run a +Repair Disk+ in your startup volume. Then restart normally and try playing a DVD movie. If everything works, the optical drive is probably OK.

  • Installation Problems with v9

    I originally tried to install the Acrobat 9.0 Prof but had problems with
    that also. It kept telling me that I needed to verify the original serial
    number for the upgrade, but I've never had the full acrobat on this
    laptop. So I decided that perhaps the reader was interfering and
    uninstalled it. Not only did it still not let me install the full Acrobat,
    now I can't get the reader to install.
    The download gets 50% through and stops. A screen comes up asking to
    Please choose the extraction location and shows
    c:\users\myname\local\reader\setup files\
    I click ok, but nothing happens. I've tried browsing for other places to
    extract, but still nothing happens.
    Someone in one of the forums mentioned using Microsoft Windows Installer,
    but Microsoft says not to use this if you are using Office 2007.
    My laptop has Vista and Office 2007.
    Marilyn

    If you have difficulties with the download manager, try to download the reader from this location http://download.adobe.com/pub/adobe/reader/win/9.x/9.0/enu/AdbeRdr90_en_US.exe

Maybe you are looking for