Jampack and keyboard connection questions

2 questions:
1. I have just bought GB Jampack (the one with lots of extra loops), but can't seem to notice any difference. How do I know that the disc has downloaded OK? Can't remember how many loops were there in the first place!
2. I'm trying to connect an Roland SK-50 Soundcanvas keyboard. Do I need some sort of interface or drivers before it will work?
Very basic questions, I know, but hey, that's what this discussion group is for isn't it?!
Regards
Mark

How do I know that the disc has downloaded OK?
If you bought the JamPack DVD you didn't download anything. Did you run the installer on the JamPack DVD?
To see just loops from your JamPack disc, open the Loop Browser and click on the top bar where it likely says "Loops" with a double arrow, and select "JamPack 1". Then only loops from the JamPack will show in the loop browser.
Re: the Keyboard
What kind of conection doesd it have? All I could find was " complete with direct Mac or PC connection" and "Connections: MIDI In, MIDI Out, MIDI Thru, Line In (LR), Line Out (LR), Computer port, and 1/8" stereo headphones jack."
"Computer Port" isn't very specific. Is it a USB connection? You might need to find a driver for it. Does the Manual say anything about installing software to make it work?
--HangTime [Will Compute for Food] B-)>

Similar Messages

Windows 8.1 and Apple Bluetooth Mouse and Keyboard connection

I recently upgraded to Windows 8.1 from Windows 8.0 Home and as a result I'm experiencing the following problems:
Apple Bluetooth Mouse - randomly dis/connects or freezes where I cannot move the mouse or it's very jerky or very slow.
Apple Bluetooth Keyboard - the keys will stick or freeze causing the redundent key presses (eg. yyyyyyyyeeeeeee).
I've done the following to fix the problem with no success:
Reinstall Boot Camp 5.0.5033 drivers
Reinstalled Bluetooth drivers from Boot Camp 5.0.533 individually
Unistalled both devices on OS X and reinstall them only on Windows 8.1
Reinstalling both on OS X and reinstalling them on Windows 8.1
Uninstalling all the drivers from the Device Manager and reinstalling them
One thing I have noticed is that under Devices and Printers I have two new devices (HID-compliant mouse and HID Keyboard Device) that were not there under Windows 8.0 in addition to my bluetooth devices. I have tried removing the new devices but they keep reinstalling themselves.
I have USB mouse that's connected and I've been able to use that without problems so I think there's a problem with the Apple driver or the Windows 8.1 bluetooth drivers.
Has anyone fixed this?
Thanks!

Just to point out the "Bluetooth Collaboration" setting I've found this:
Bluetooth Collaboration enables general purpose input/output transmit suppression protocol between the IEEE 802.11 media access control (MAC) and an external Bluetooth chip to minimize transmit interference. Bluetooth Collaboration is enabled by default.
And it is not enabled by default on some devices like on mine!
http://chasms.com/wireless_utilities/broadcom/props.htm#toc_51

Keyboard connection question

I just got a yamaha MO8 keyboard, and i was wondering how i could play the sounds from the keyboard on to logic, i know how to use it MIDI, but thats what i am not looking for. If anyone can help me out i would appreciate that very much.....

Hi,
You need to physicaly connect the audio output of your synth, and then create a new track to record this audio into Logic.
This is what is called "recording audio", there's a whole chapter dedicated just for this...
Cheers

ViewObjectImpl and db connection question

I will be populating the ViewObjectImpl's RowSet from a web service.
For simplicity, I create the ViewObjectImpl from an SQL query. There is no Entity Object involved.
My question is if I remove the SQL statement from the View.xml file, will the ViewObjectImpl try to connect to the database and throw an error?
Thank you.
Richard Catlin

In the best case you setup your application server to make a connection pool, and let the app-server do the connecting. You just grab a DataSource from your app-servers environment... Besides, I wouldn't want to have a db connection in my JSP's. I would let a bean handle that, and write the output of the bean to the page....

Mouse and keyboard connection issue

hello everyone
since a couple of month we have an imac snow leopard.
sometimes the keyboard cannot turn on the imac and the mouse has no connection either. we checked the bluetooth connection and batteries are ok, too.
we went trough the apple help file http://support.apple.com/kb/TS2662?viewlocale=de_DE but no improvement. the problem shows up again after a wile.
thanks for your help
greets louis

Hello:
Try resetting the PRAM and SMC (instructions in knowledge base articles).
Barry

Read-only connection and other connection questions

Apologies if this is a FAQ (and if it is please point me to them if this is the case) but I've just made the transistion from Toad to SQL Developer and struggling to find the equivelent of a couple of very useful features.
1 ) Read-Only connection: In Toad it is possible to set a connection to read-only via a checkbox. This meant for most of the time you would browse the live DB but when required you could uncheck the box and perform updates i.e. no seperate user required.
2) Colour Coded Connections: In Toad is is possible to assign a colour to your connection and all windows you opened for that connection would inherit the colour. Typically Red for Live, Green for Dev etc.
3) Hide tabs for non active connections: When you have multiple connections open you only saw tabs for the current connection. All others were hidden until their connect was selected.
I've had a look around SQL Dev and cant see these options but may have missed them. Are there similiar options in SQL Developer?

There are feature requests for points 1 and 2 but AFAIK they are not yet implemented.
I dont remember any feature request for point 3, but maybe i've missed it.

Another "edit in photoshop" and keyboard shortcut question

I have both PSCS6 32 bit and 64 bit installed on my computer (usual default installation). When I next installed LR4, it automatically picked PSCS6 64 bit as the default external editor without asking my preference.
I always use PSCS6 32 bit and not the 64 bit version.
While I can add the PSCS6 32 bit program as an "additional external editor" and access it from a right click contextual menu for editing an image from LR4, I cannot use the convenient Ctrl + E keyboard shortcut since that will always launch the unwanted PSCS6 64 bit program.
Is there a way to reestablish this keyboard shortcut convenience for my 32 bit program?
Thanks in advance!
OS: Windows 7 professional

Scott,
There is a registry hack you could try:
http://helpx.adobe.com/x-productkb/multi/edit-photoshop-command-missing-photoshop.html
That's for making PS show up when it doesn't show up at all, but there's a place to add the path to the executable that you could modify to point to the 32-bit version. You might want to do a checkpoint for System Restore before you start.
Hal

Secured and Unsecured connection question

I was dealing with a customer when she asked me a question about her wrt54g wireless router. She said that when she goes into view available wireless networks it shows one network, Secured. And the same network name, unsecured. They are both her name (she has an obscure name so i doubt anyone in the area named their network the same).
My question is, how do you disable the unsecured network? I would assume it's a profile in the router (windows only has her secured network listed in the profiles).

The router can only generate one wireless network, so the "extra network" is not coming from the router.
On some systems, the wireless adapter software will show two entries for your own wireless network if "SSID Broadcast" is set to "disabled". One entry is the wireless network without its SSID, and it will be shown correctly as either being encrypted or unencrypted. The second entry is the same wireless network with its SSID, and it too will be shown correctly as either being encrypted or unencrypted. This is not exactly what you described, but may be the cause for the confusion.
Another possibility is that the unencrypted network is somehow poping up from her list of "preferred networks", and that it got into that list before she encrypted the network. In this case, either "Refresh" the list of available networks, or delete the listing for the unencrypted network from the list of "preferred networks".
Another possibility is this: Someone else in her household has their wireless card set to "Ad-hoc" mode, and it is generating the unencrypted network. (Yes, this does happen! )
Another possibility is this: Someone in the neighborhood has copied her SSID. In this case, change the SSID, disable SSID broadcast, and encrypt the network with a strong password.
If it is none of the above, then download and install the latest driver for the wireless card.
Message Edited by toomanydonuts on 04-17-200703:38 PM
Message Edited by toomanydonuts on 04-17-200703:39 PM
Message Edited by toomanydonuts on 04-17-200703:41 PM

New Apple TV and wireless Connection Question?

My son lives in Russia and works for the State Dept. He want an Apple TV. The problem is that he is not tech savvy. Does the Apple TV need to connect wired or wireless to the router or just to the laptop to stream. He has a wireless connection for the laptop but if he has to go through set up and connect it to a router, I will never be able to walk him through it from 10,000 miles away. I have the old Apple tv and have it connected to the router with a wired connection. But I guess my IMAC synchs with the old Apple TV to send programs whether it is hardwired to a router or not. I hope this makes sense.

New AppleTv will connect via ethernet or wi-fi as before.
You could more than likely just connect it directly to the laptop with ethernet to stream locally stored content,but you'd need to set up some kind of internet sharing for it to access any internet or itunes store features.
AppleTV could also be set to work with an ad hoc wireless network from laptop but again internet connection would have to be shared over this, and it might be a bit fiddly too if router setup is going to be fiddly.
Simplest would be to connect both to router with ethernet. Have you considered mains powerline ethernet adapters if running cables is impractical?

PowerBook and iTunes Connect question

Hi,
I am a newby to the world of App development. I have an App Developer account and have built an App--but cannot run the App Loader from iTunes Connect. I am using a PowerBook with OS 10.5.8.
Is there some other step I am missing? I was told that as long as the OS was better than 10.4 that I should be able to develope on an Apple computer... If I cannot upload on this computer, my employer will most likely upload our App on the Android market instead.
Any thoughts? Ideas?

Hello,
from what I understand you need an Intel based Mac to produce applications for iOS devices. This means anything from Xcode 4.0 upward on Snow Leopard. (Mac OS X 10.6)
You may get a better responce in the developers froum here:
https://discussions.apple.com/community/developer_forums
Best of luck

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

Kowhai wrote:
Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

TS4456 New Mac mini and older wireless keyboard connect, but don't pair

In setting up my brand new Mac mini, the wireless mouse paired with no problem, but I'm having trouble with the keyboard. I am using an older mouse and keyboard from my previous mini, which is completely shut down. The keyboard shows as being connected to the computer, but when I enter the code and press Return, the code disappears and nothing else happens. After a while the code reappears and I repeat the process with the same results. After several attempts, nothing else happens. I've tried rebooting twice, checked the keyboard batteries, made sure the keyboard light is blinking to show it's discoverable, but I can't move past this screen. I don't know what else to try. Please help!

Hi, it isn't paired to another device is it?
Might see this...
http://www.christopher-parsons.com/blog/technology/solved-bluetooth-devices-not- connecting-to-osx/

TS3048 turned off my desktop mac, now both my mouse and keyboard are not connected. i am not logged in yet as well, dont know what to do ?

turned off my desktop mac, now both my mouse and keyboard are not connected. i am not logged in yet as well, dont know what to do ?

Try resetting the SMC (no peripherals required).
Barry

Design question ... Remote control and keyboard

Hey i am building a system that should support remote control input and keyboard input
the system is a addons based any user could build any addon he wishes
i have now two main input events types
KeyEventand
RemoteControlEventi wish to use only one type of event
i am thinking of 2 options.
1) Map
RemteControlEventto
KeyEventif this why is the best what happens i a situation that i mapped J key to the RECORD button
how a specific addon should know that a RECORD operation is pressed or it's just a J button
2) Write a new events that contains
KeyEventactions and
RemteControlEventactions
thanks allot

thanks for your replay
i am sharing my thoughts with you ,cause i relay want to do it the best way.
when i mention remote control i meant using a TV/VCR/MCE Remote Control.
(i am usingJLIRC ( LIRC ) )
and i have decided .
i will listen to all keyboard event using "dispatchKeyEvent"
and will map Remote control keys to keyboard keys
here is another question to make sure i understand fully .
the application that i am writing is an add-on based
every programmer that will like to create an add-on
will extend the "Screen" object for is main panel (Screen exnteds JPanel)
so i was thinking when dispatchKeyEvent called i should call dispatchKeyEvent in the current displayed screen
(if the screen dispatchKeyEvent returns false.
the main dispatchKeyEvent should continue.
case true the main dispatchKeyEvent will return true)
then in the screen implementation the user can ask if this key is an Spacial Key
if yes he can get the spacial key attached to this keyboard key
i just wrote an example of how it's suppose to be
public MP3PLayer implemants Screen {
public boolean dispatchKeyEvent(KeyEvent e){
    boolean isSpeacial = RemoteComtrolKey.getInstance().isSpeacialKey(e.getKeyCode);
    if(isSpeacial){
        int mappedKey = RemoteComtrolKey.getInstance().getSpeacialKey(e.getKeycode());
        if(mappedKey == RemoteComtrolKey.REC){
          //do the record
           return true;
    return false;
}georgemc thank you very much

Wireless mouse and keyboard won't connect.

I have a windows 7 computer and a wireless keyboard and mouse which connect to one usb receiver.
I was on the computer and suddenly both my mouse and keyboard stopped working.
The mouse lights up a red light but doesn't work. The computer says it can't recognize the receiver.
The usb receiver doesn't have a connect button. Perhaps the button is a sensor type, but it doesn't seem to make a light turn on.
Perhaps it doesn't work because i touched it with my foot. Please help

It would help me greatly if you identified your TouchSmart PC.
How to identify an HP TouchSmart PC.
Had you considered temporarily connecting a USB mouse and keyboard to enable you to install the original drivers from the Recovery Manager?
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Jampack and keyboard connection questions

Similar Messages

Maybe you are looking for