Japanese Character displaz in SAP editer SE38

Hello All,
In the SAP system I am able to logon to Japanese language. But if ii do so all the charters are displayed in strange form not in Japanese language.
I am using XP and activated Japanese language setting in the control panel. Even through i am not able to display the Japanese charters .
Please let me know what i should do, Is there any thing i need to install on my system? or any settings need to be do at GUI level to display the Japanese charters?
Thanks,
Feroz.

This problem is solved by installing the Japanese language fonts in the XP environment.
Thanks,
feroz.

Similar Messages

Sending Japanese Character From XI to SAP 4.6C

Dear Expert,
I have a requirement here to send Japanese character from web application --> XI --> IDOC(in 4.6C).
However, it always fail, and I could only see garbage character.
I have tried the suggestion to put the logon language as JA in the RFC destination, but it is not working.
Please kindly help with your suggestion.
Thank you very much.
Best Regards,
Y

Please check this How to read oracle database contain Chinese Character ?
I have done scenario JDBC ---> XI -
> ABAP Proxy. All the data in oracle database is in chinese character.
Regards
Ferand
Edited by: Fernand Lesmana on Jul 22, 2010 11:04 AM

How to display greek character in adobe digital edition using urf-8

how to display greek character in adobe digital edition using urf-8

when i tried to open below link
https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/bobj_download/main.htm
It's not opening & displaying access denied message as below.
403 Access denied
You do not have the permissions to access this resource
Error is logged with Tag:
Just want to know, Is it possible to display japanese characters on report using crystal report 8.5?
We've constraint to use only CR 8.5
Regds,
Kaushal

Japanese character

Hi All,
Is there is any way to display the japanese character in the application.We have made a smart sync application which is working fine for English language but when we use the application for Japanese user for japanese data..the data is coming in garbage form like "Éìs¯a@ " what settings needs to be done either in mobileengine config file or on to the server side to enable the support for unicode characters on to the client.
The MI server configuration
a) Operation system version AIX
b) OS 32 bit or 64 bit? 64 bit
c) Unicode or Non-Unicode Unicode
R/3 one SAP system configuration
a) Operation system version AIX
b) OS 32 bit or 64 bit? 64 bit
c) Unicode or Non-Unicode Non Unicode
Thanks in advance.
Regards
Devendra kumar

Hi Devendra
Have you used the Multi Language Feature made available with MI 2.5 SP18 or MI7.0 SPS09? Please refer to the note 1029594 for more information on this. If no, then request to you implemente this feature. If yes, I feel the problem you are facing is directly related to you backend being a Non Unicode system and MI Server being a Unicode system. If you read the word document attached to the note mentioned, there is an indication referring to such a combination <i><b>In a Multi language scenario, if the backend is Unicode based then the middleware must also be Unicode based. The Unicode languages get converted to junk characters when they are transferred from the backend to the middleware. In such scenarios replication may fail or data may not get downloaded to the client</b></i>. Just FYI, Please refer to the replies in thread Re: Unicode to Japanese characters which might be useful to you.
Best Regards
Sivakumar

Problem displaying japanese character set in shopping cart smartform

Hi All,
whenever users are entering some text in Japanese character set while creating a shopping cart in SRM, the smartform print output is displaying some junk characters!! even though the system is unicode compatable, did any one have problem ??
Thanks.

Hi,
May be there is some problem with UNICODE conversion.
See the foll links;
Note 548016 - Conversion to Unicode
http://help.sap.com/saphelp_srm50/helpdata/en/9f/fdd13fa69a4921e10000000a1550b0/frameset.htm
Europe Languages work in Non- Unicode System
Re: Multiple Backends
Re: Language issue
Standard Code Pages in Non-Unicode System
Re: Upgrade from EBP 4.0 to SRM 5.0
http://help.sap.com/saphelp_srm50/helpdata/en/e9/c4cc9b03a422428603643ad3e8a5aa/content.htm
http://help.sap.com/saphelp_srm50/helpdata/en/11/395542785de64885c4e84023d93d93/content.htm
BR,
Disha.
Do reward points for useful answers.

Character Strings in Sap Script

Hi,
how to create character strings in Sap Script?
thanks,
fractal

Hi,
Defining Character Formats Character formats in forms determine how text is formatted within paragraphs. They are a refined form of text layout.
1. Choose Goto  Character strings. This takes you to the request screen for standard attributes of character strings. 2. Choose Edit  Create element. A dialog box appears. 3. Enter a character tag and description. The character tag is created. The system sets all standard attributes to * . You can overwrite this setting. 4. Choose Attributes  Font to define the font attributes for the character format. Font attributes provide a more detailed definition. 5. Enter values in the input-enabled fields. The fields Bold, Italics, and Underlined are automatically displayed with * . You can overwrite this with your entry. 6. Repeat the definition of character tags and their standard and font attributes until all required character formats have been defined. 7. Save the character formats
for more info, check this link:
http://wiki.ittoolbox.com/index.php/HOWTO:Sap_script
regards,
keerthi.

How to Display Japanese character in Crystal Report 8.5

Hi,
I've some data stored in japanese language in sql server 2005 database using nvarchar datatype.
When i execute store proc in sql server, it's showing japanese character properly in sql server. However, when i'm trying to display data in crystal report 8.5, it's showing ????? character.
I've tried to change font to 'Arial Unicode MS (Japanese)',MS Gothic, MS UI Gothic, MS Mincho (Japanese) as per the search result available in google. But not had any luck.
Can anyone please provide any solution for this?
Many Thanks.
Kaushal

when i tried to open below link
https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/bobj_download/main.htm
It's not opening & displaying access denied message as below.
403 Access denied
You do not have the permissions to access this resource
Error is logged with Tag:
Just want to know, Is it possible to display japanese characters on report using crystal report 8.5?
We've constraint to use only CR 8.5
Regds,
Kaushal

Character length of an editable fields

hi frnz,
I have created an editable field in an ALV report.My client wants the character length of this editable field as 1000.I have made the data type as 'STRINGS' and length as '1000', but still in this editable field i am able to feed only upto character length of 128 not beyond this value.The text which my client wants to feed is of 950 characters. Could anyone give some solution for this
Thanks
Praveen

Hi, i think you have to give intlen and outputlen in field catalog
FIELDCAT-INTLEN = 1000.
FIELDCAT-OUTPUTLEN = 1000.
Please check the doc of field catalog
[http://help.sap.com/saphelp_erp2004/helpdata/en/ff/4649a6f17411d2b486006094192fe3/content.htm]
Regards,
Ben

Japanese character while export..

Hi,
In my table for a column there are Japaneese character is lying..I have written some select statement and when i am going to export the result in excel at that time the japanese character are chaged to some typical character..
Please help how i can get the Japanese character while export...
Thanks,
HP..

Check on MOS/metalink:
Japanese Data Not Displayed Correctly Using Excel And Oracle Odbc Driver [ID 563244.1]
This forum might be a better place:
Globalization Support
Edited by: oradba on 15.04.2011 12:24

Some japanese character encoded to "?". Please help me..

My system is below listed.
J2SE 1.4.1
MySql Ver 11.18 Distrib 3.23.52,
Resin 2.1.4
Java application load html document encoded 'SHIFT_JIS' using HtmlURLConnection.
And read the document in 'SHIFT_JIS'.
Almost it appears properly but some of characters printed in '?'.
hm....
I will show my source code.
private String readDocument(URL url) {
String METHOD_NM = ".readDocument()";
try {
HttpURLConnection URLCon = (HttpURLConnection)url.openConnection();
BufferedReader in = new BufferedReader( new InputStreamReader(url.openStream(), "SJIS"));
String inputLine;
On my web server, input the character(printed '?') on textbox in IE6(japanese language pack). and submit. then the character translated the code(ex> #4575; )
The code inserted DB. select from DB the tuple.
and display the IE6. it's ok.
but loaded from japanese html. It's inserted to DB '?'.
and displayed '?' on IE6.
I want to translate the character to code(ex> #5455;).
OK?
Please reply...
p.s I'm sorry my poor english..

Thank you for reply.
but I've already tried that.
I have tried all japanese encoding of "Supported Encodings" from java.
http://java.sun.com/j2se/1.3/docs/guide/intl/encoding.doc.html
I want to convert that.
ex)
?fe? => & # 4532; fe & # 3456; => original charcater is removed blank
This is convert '?' to code number.
In this case '?' is Japanese character.
Please let me know the way..

Japanese character is not displaying properly in JDialog

Hi All,
Japanese character are shown in parent window but not displaying properly JDialog window.
Even JDialog Title bar is showing in Japanese properly but JLabel's and JButton text are not showing properly in Japanese.
Anybody knows why Japanese characters are not showing properly in JLabel and JButton of JDialog window.
Thanks,
-Mani

Specified font on that objects, that's why Japanese character doesn't shown.

Problem with Japanese character Codes

I have been working for a company which got a product to support the sms activities. We are developing a new feature which supports Japanese language as of now along with english. We developed a new character set called PDC which is a combination of the following Japanese character sets JIS + SHIFT- JIS+ KATAKANA + ASCII.
I am using Java API Charsets.jar to convert the bytes using the respective character sets to a STRING and presenting the converted STRING on a JSP.
The Problem is I am able to see the Jap Chars which belong to JIS + ASCII but not for KATAKANA and SHIFT-JIS.
I am using the below page tag in JSP.
<%@ page contentType="text/html; charset = JIS " %>
I couldn't find any other tag specifically which supports all the character sets. Could some one please help me?
Pradeep.

Okay... you developed a new character set... that's great. How's the browser supposed to know anything abou it?
Maybe just use UTF-8 which should support all of that and other languages as well and stop boxing yourself into a fixed charset.

In RoboHelp,we can't able to input japanese character in search box while english is able to type?

Hi
Our Application having multilanguage support(Localization) which using adobe RoboHelp
we can't able to input japanese character in search box while english is able to type and get result.please help us if anybody having knowledge for these issue.
Thanks,
Sunil

Hi Anybody,
Our Application developed in Adobe Air with multiple language support ,When user click on help menu, It will Open Adobe AIR's Window component which Render Adobe RoboHelp 8 's xyz.html file which shows Help detail.
In Help Window there is search functionality , When user login with english language , user can able to type english keyword in search box while in Japanese language, user cannot able to type Japanese keyword.
Also,When user login in japanese language then user also set it's region language japanese from Control panel of Window XP.
But I User cannot able to type in Seach box in help window which having . html Adobe RoboHelp File. This is whole story.
Please Reply if anybody can have good answer. i am waiting for that.
Thanks,
Sunil

Japanese character in WLS7.0

Hello,everyone:
I got such a problem,It's about japanese character in WLS7.0.
Let me describe my envirment first,
OS:windows 2000 pro (japanese)
WLS:Weblogic Sever 7.0 (english)
When i write in a japanese character in a form contained by a jsp
webpage,then submit
this form to WLS7.0,the Weblogic server should display the character
originally,but the
return value is confusion.
alternatively,when i submit this form to weblogic server 6.1,the
original and return value
is the same.
Does the Weblogic Server 7.0 english version not support Japanese
character inputting?
thank you for readding!
liu gang

I am using Oracle OC4J Standalong Server v10.1.3.
Its kind of weird because after I have successfully logged in, the japanese characters are correctly displayed. It is only at the login page that the header text displays improperly. Below shows the details:
header-layout.jsp (this is the jsp that has a problem in the display)
before login:
login.jsp ---> this imports the header-layout.jsp. other japanese texts within the login.jsp file are correctly displayed but the japanese text in the header-layout.jsp is not properly displayed.
after login:
list.jsp --> this uses the same header-layout.jsp but specifies it using tiles-defs.xml

Japanese character appear rotated when applying a Formula on the field

We have a problem where the japanese character appear well on the report when
simply drag and drop a field that contained japanese data from the database
BUT it display the japanese character rotated horizontally when we apply a simple
formula on it. The formula don't change any style or rotation.
I think it's a bug. Is anyone had this problem before?

we are using BO XI release 1 SP4 and the application use these components.
but I also created a small project with the Visual Studio 2008 with the latest crystal report 2008 embedded components and both return the same result.
Japanese character appear well but (each character are rotated 90 degrees) on the field where a formula field is set and my formula don't do nothing except setting the field itself :
Here is the formula:
formula = {buyer_index_alphabetical_FR;1.alt1name}
alt1name is a field that contain japanese
and the field data appear well on the report but with each character rotated.
if we map on a textfield, the field alt1name directly without this formula
the text appear normally
I didn't use formatting formulas
that 's why my conclusion is that it's a bug.
But I am surprised that nobodyelse mentioned that.

Japanese Character displaz in SAP editer SE38

Similar Messages

Maybe you are looking for