Java AS 700 post install error
I am getting an error after install of the java AS 700 when I am trying to run the JSPM. It's telling me it cannot locate the DBINFO.XML file.
I'm sure I've missed a step somewhere but I cant find any note or anything with DBINFO.XML in it.
The SDM, http etc are all running fine.
TIA,
M
SOLUTION:
Turns out that my %JAVA_HOME% variable was point to the JRE from the initial install. I never changed it to the JDK path.
I discovered this because the logs were telling me that that it didnt support the cp850 bin2. A quick search on that turned up a note explaining that this variable was pointing in the wrong place.
M.
Similar Messages
-
Post-Install Error on EBS 12 - Login Page Error RW-50016 on Linux
Hi All,
Post-Install Error on EBS 12 - Login Page Error RW-50016 on Linux
Thanks in advance.set hostnme correctly
-
5.2 Patch 2 Post-Install Error
Jay,
I am installing patch 2 for IMS 5.2 today and got the following
errors during the Post-install: (imsimta test -rewrite -debug postmaster)
(can you take a look and comment ?) maybe this is because LDAP (directory server) was not running?
I changed the company domain in the output below:
5.2p2 has been installed successfully.
Running Post-install procedures.
/var/iplanet/ims52/msg-mailsvr2/imsimta chbuild
/var/iplanet/ims52/msg-mailsvr2/imsimta cnbuild
[05/Jan/2005:11:13:10 -0600] mailsvr2 [3422]: General Warning: could not get server configuration in ldap, using cached configuration information
/var/iplanet/ims52/msg-mailsvr2/imsimta cleandb
/var/iplanet/ims52/msg-mailsvr2/imsimta counters -delete
11:13:11.79: Exit code = 0 (2) - IMTA__NO, basic NO, log_delete_sections error
/var/iplanet/ims52/msg-mailsvr2/imsimta version
SunOS mailsvr2 5.8 Generic_117350-10 sun4u sparc SUNW,Ultra-60
iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)
libimta.so 5.2 Patch 2 (built 19:30:12, Jul 14 2004)
/var/iplanet/ims52/msg-mailsvr2/imsimta test -rewrite -debug postmaster
Initializing mm_.
Initializing mm_ submission.
Checking identifiers.
*** Debug output from initializing MM for submission:
11:13:12.33: mmc_winit('l','[email protected]','[email protected]') called.
11:13:12.33: Queue area size 48882178, temp area size 48882178
11:13:12.33: 12220544 blocks of effective free queue space available; setting disk limit accordingly.
11:13:12.33: Rewriting: Mbox = "postmaster", host = "mailsvr2.xyz-company.com", domain = "$*", literal = "", tag = ""
11:13:12.33: Rewrite: "$*", position 0, hash table -
11:13:12.33: Found: "$E$F$U%[email protected]"
11:13:12.33: Rewrite failed, not forward.
11:13:12.33: Rewrite: "$*", position 1, hash table -
11:13:12.33: Failed.
11:13:12.33: Rewrite: "$*", position 0, rewrite database -
11:13:12.33: Failed
11:13:12.33: Rewriting: Mbox = "postmaster", host = "mailsvr2", domain = "mailsvr2.xyz-company.com", literal = "", tag = ""
11:13:12.33: Rewrite: "mailsvr2.xyz-company.com", position 0, hash table -
11:13:12.33: Found: "$U%[email protected]"
11:13:12.33: New mailbox: "postmaster".
11:13:12.33: New host: "mailsvr2.xyz-company.com".
11:13:12.33: New route: "mailsvr2.xyz-company.com".
11:13:12.33: New channel system: "mailsvr2.xyz-company.com".
11:13:12.33: Looking up host "mailsvr2.xyz-company.com".
11:13:12.33: - found on channel l
11:13:12.33: Routelocal flag set; scanning for % and !
11:13:12.33: Rewriting: Mbox = "postmaster", host = "mailsvr2.xyz-company.com", domain = "$*", literal = "", tag = ""
11:13:12.33: Rewrite: "$*", position 0, hash table -
11:13:12.33: Found: "$E$F$U%[email protected]"
11:13:12.33: Rewrite failed, not forward.
11:13:12.33: Rewrite: "$*", position 1, hash table -
11:13:12.33: Failed.
11:13:12.33: Rewrite: "$*", position 0, rewrite database -
11:13:12.33: Failed
11:13:12.33: Rewriting: Mbox = "postmaster", host = "mailsvr2", domain = "mailsvr2.xyz-company.com", literal = "", tag = ""
11:13:12.33: Rewrite: "mailsvr2.xyz-company.com", position 0, hash table -
11:13:12.33: Found: "$U%[email protected]"
11:13:12.33: New mailbox: "postmaster".
11:13:12.33: New host: "mailsvr2.xyz-company.com".
11:13:12.33: New route: "mailsvr2.xyz-company.com".
11:13:12.33: New channel system: "mailsvr2.xyz-company.com".
11:13:12.33: Looking up host "mailsvr2.xyz-company.com".
11:13:12.33: - found on channel l
11:13:12.33: Routelocal flag set; scanning for % and !
11:13:12.33: Mapped return address: [email protected]
*** Debug output from rewriting a forward header address:
11:13:12.33: Rewriting: Mbox = "postmaster", host = "xyz-company.com", domain = "$*", literal = "", tag = ""
11:13:12.33: Rewrite: "$*", position 0, hash table -
11:13:12.33: Found: "$E$F$U%[email protected]"
11:13:12.33: Rewrite failed, not envelope.
11:13:12.33: Rewrite: "$*", position 1, hash table -
11:13:12.33: Failed.
11:13:12.33: Rewrite: "$*", position 0, rewrite database -
11:13:12.33: Failed
11:13:12.33: Rewriting: Mbox = "postmaster", host = "xyz-company", domain = "xyz-company.com", literal = "", tag = ""
11:13:12.33: Rewrite: "xyz-company.com", position 0, hash table -
11:13:12.33: Found: "$U%[email protected]"
11:13:12.33: New mailbox: "postmaster".
11:13:12.33: New host: "xyz-company.com".
11:13:12.33: New route: "mailsvr2.xyz-company.com".
11:13:12.33: New channel system: "mailsvr2.xyz-company.com".
11:13:12.33: Looking up host "mailsvr2.xyz-company.com".
11:13:12.33: - found on channel l
11:13:12.33: Routelocal flag set; scanning for % and !
11:13:12.33: Rewrite rules result: [email protected]
11:13:12.33: Checking reverse URL cache for: [email protected]
11:13:12.33: Applying reverse URL pattern ldap:///$V?mail?sub?$Q to: [email protected]
11:13:12.34: URL generation failed, status = 0
forward channel =
backward channel = l
header To: address = [email protected]
header From: address = [email protected]
envelope To: address = (route (reprocess-daemon-error,reprocess-daemon-error)) (host xyz-company.com)
envelope From: address = [email protected]
name =
mbox = postmaster
Extracted address action list:
[email protected]
Extracted 733 address action list:
[email protected]
Address list expansion:
-13 expansion total.
*** Debug output from submitting an envelope address:
11:13:12.34: mmc_wadr(0x00060450,'postmaster','postmaster') called.
11:13:12.34: Copy estimate before address addition is 1
11:13:12.34: Parsing address postmaster
11:13:12.34: Rewriting: Mbox = "postmaster", host = "xyz-company.com", domain = "$*", literal = "", tag = ""
11:13:12.34: Rewrite: "$*", position 0, hash table -
11:13:12.34: Found: "$E$F$U%[email protected]"
11:13:12.34: Match, pattern = "xyz-company.com", current = "(*domaincheck*)"
11:13:12.34: old state = not checked.
11:13:12.34: Performing domainMap check on xyz-company.com.
11:13:12.34: domain check failed with temporary error 91.
11:13:12.34: Temporary lookup failure, using fallback rewrite reprocess-daemon$Mtcp_local$1M$1~-error$4000000?Temporary lookup failure
11:13:12.34: Match, pattern = "tcp_local", current = "l"
11:13:12.34: old state = succeeded.
11:13:12.34: new state = succeeded.
11:13:12.34: New mailbox: "postmaster".
11:13:12.34: New host: "xyz-company.com".
11:13:12.34: New route: "reprocess-daemon-error".
11:13:12.34: New channel system: "reprocess-daemon-error".
11:13:12.34: New error message: "Temporary lookup failure".
11:13:12.34: Looking up host "reprocess-daemon-error".
11:13:12.34: - Not found
11:13:12.34: Copy estimate after address addition is 1
Submitted address list:
Address list error -- 4.0.0 Temporary lookup failure: postmaster
Submitted notifications list:
Checking installed version string.
New Installed Version is 5.2 Patch 2
Please consult the README.txt file for post-installation instructions.
#Yes. "All iMS services" means running stop-msg, and making sure all processes that started from that are done. Specifically:
tcp_smtp_server
tcp_smtp_client
ims-master
imapd
popd
mshttpd
dispatcher
job_controller
things not included:
slapd
admin-serv
web servers
etc. -
Java card cap file install error in jcop tools
When i try to run java card applet in real java card it gives this error.i used jcop tools and java version 1.5 and eclipse 3.2.when i run the applet in simulater it works fine.i saw some document it says allocate memory for the installation process.i don't know how to do that.
/term "winscard:4|SCM Microsystems Inc. SCL010 Contactless Reader 0"
--Opening terminal
> /card -a a000000003000000 -c com.ibm.jc.CardManager
resetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B 8A 80 01 4A 43 4F 50 33 31 56 32 33 32 7A ;...JCOP31V232z
ATR: T=0, T=1, Hist="JCOP31V232"
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(23807 usec)
<= 6F 65 84 08 A0 00 00 00 03 00 00 00 A5 59 9F 65 oe...........Y.e
01 FF 9F 6E 06 47 91 73 51 2E 00 73 4A 06 07 2A ...n.G.sQ..sJ..*
86 48 86 FC 6B 01 60 0C 06 0A 2A 86 48 86 FC 6B .H..k.`...*.H..k
02 02 01 01 63 09 06 07 2A 86 48 86 FC 6B 03 64 ....c...*.H..k.d
0B 06 09 2A 86 48 86 FC 6B 04 02 15 65 0B 06 09 ...*.H..k...e...
2B 85 10 86 48 64 02 01 03 66 0C 06 0A 2B 06 01 +...Hd...f...+..
04 01 2A 02 6E 01 02 90 00 ..*.n....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 AC B1 90 01 BF 2D 24 A0 00 .P........-$..
(49906 usec)
<= 00 00 91 18 01 39 93 95 05 59 FF 02 00 2C BE 39 .....9...Y...,.9
5E A5 07 55 87 B8 C3 A8 A6 93 66 2B 90 00 ^..U......f+..
Status: No Error
cm> ext-auth plain
=> 84 82 00 00 10 0C AE 50 3E C8 7E 1D 92 29 E2 59 .......P>.~..).Y
08 D9 DA 02 16 .....
(57276 usec)
<= 90 00 ..
Status: No Error
cm> delete 060504030201
=> 80 E4 00 00 08 4F 06 06 05 04 03 02 01 00 .....O........
(40041 usec)
<= 6A 88 j.
Status: Reference data not found
jcshell: Error code: 6a88 (Reference data not found)
jcshell: Wrong response APDU: 6A88
Ignoring expected error
cm> delete 010203040506
=> 80 E4 00 00 08 4F 06 01 02 03 04 05 06 00 .....O........
(17392 usec)
<= 6A 88 j.
Status: Reference data not found
jcshell: Error code: 6a88 (Reference data not found)
jcshell: Wrong response APDU: 6A88
Ignoring expected error
cm> upload -d -b 250 "Cap File location"
=> 80 E6 02 00 13 06 01 02 03 04 05 06 08 A0 00 00 ................
00 03 00 00 00 00 00 00 00 .........
(32303 usec)
<= 00 90 00 ...
Status: No Error
=> 80 E8 00 00 FA C4 81 F2 01 00 23 DE CA FF ED 02 ..........#.....
02 04 00 01 06 01 02 03 04 05 06 12 68 6D 73 2F ............hms/
6A 61 76 61 63 61 72 64 2F 68 65 6C 6C 6F 02 00 javacard/hello..
21 00 23 00 21 00 0A 00 0B 00 1E 00 0E 00 3D 00 !.#.!.........=.
0A 00 0B 00 00 00 4D 01 BE 00 00 00 00 00 00 01 ......M.........
01 00 04 00 0B 01 02 01 07 A0 00 00 00 62 01 01 .............b..
03 00 0A 01 06 06 05 04 03 02 01 00 08 06 00 0E ................
00 00 00 80 03 00 FF 00 07 01 00 00 00 1C 07 00 ................
3D 00 01 10 18 8C 00 05 7A 05 30 8F 00 00 3D 8C =.......z.0...=.
00 01 18 1D 04 41 18 1D 25 8B 00 02 7A 02 21 18 .....A..%...z.!.
8B 00 03 60 03 7A 19 8B 00 04 2D 1A 04 25 73 00 ...`.z....-..%s.
09 00 00 00 00 00 0F 11 6D 00 8D 00 06 7A 08 00 ........m....z..
0A 00 00 00 00 00 00 00 00 00 00 05 00 1E 00 07 ................
01 00 02 00 06 00 00 01 03 80 03 02 03 80 03 03 ................
03 80 0A 01 06 80 03 00 06 80 07 01 09 00 0B 00 ................
00 00 07 05 06 04 0A 07 07 13 0B 00 4D 01 00 00 ............M...
(764519 usec)
<= 6A 80 j.
Status: Wrong data
jcshell: Error code: 6a80 (Wrong data)
jcshell: Wrong response APDU: 6A80
Unexpected error; aborting executionThanks ReNa
i am using nxp jcop 31 contact-less card.and it will support for java card 2.2.1 and global-platform card specification 2.1.1 .so i am using nxp jcop training 2007 tools and it has java card 2.2.1 and global-platform card specification 2.1.1.Inside my project there are three jar files these are jc221.jar and gp211.jar and bio10.jar
i will appreciate your help
Thanks -
Flash Player 11.7.700.169 install errors 1722 Action NewCustomAction1
Hi,
Yet again on mass deployment of Flash updates we are seeing problems. We update all Flash agents via SCCM and SCUP and have recently published the 11.7 update.
A very high proportion of the machines (Windows 7 x64) fail with this in the event viewer:
Product: Adobe Flash Player 11 ActiveX -- Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Windows\TEMP\InstallAX_11_7_700_169.exe, command: -install -msi
You are then left with no version of Flash as it has already removed 11.6.
Based on previous versions with problems I tried deleting any keys related to Flash from HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products and also all of the "Safe Versions" keys. Even after doing this the problem still exists.
Looking for a solid, remote solution as I've got about 8,000 machines to work on. The relevant parts of the flashinstalllog are below:
?=O====== M/11.7.700.169 2013-04-22+08-46-23.494 ========
0000 [I] 00000010 "C:\Windows\TEMP\InstallAX_11_7_700_169.exe" -install -msi
0001 [F] 00001041
=X====== M/11.7.700.169 2013-04-22+08-46-23.852 ========
2013-4-22+8-46-37.471 [error] 1226 1062
?=O====== M/11.7.700.169 2013-04-22+08-46-28.501 ========
0000 [I] 00000010 "C:\Windows\TEMP\InstallPlugin_11_7_700_169.exe" -install -msi
0001 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/Version 2
0002 [W] 00001036 Software\Macromedia\FlashPlayerPlugin/PlayerPath 2
0003 [I] 00000011 1
0004 [I] 00000020 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0005 [W] 00001037 SOFTWARE\MozillaPlugins\@adobe.com/FlashPlayer/ 2
0006 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player Plugin/ 2
0007 [W] 00001036 Software\Mozilla\Firefox\extensions/Plugins 2
0008 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0009 [W] 00001036 Software\Opera Software/Last CommandLine 2
0010 [W] 00001036 Software\Opera Software/Last CommandLine 2
0011 [W] 00001036 Software\Opera Software/Plugin Path 2
0012 [W] 00001036 Software\Opera Software/Plugin Path 2
0013 [I] 00000014 C:\Windows\SysWOW64\Macromed\Flash\NPSWF32_11_7_700_169.dll
0014 [I] 00000015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_11_7_700_169_Plugin.exe
0015 [I] 00000024 C:\Windows\SysWOW64\Macromed\Flash\plugin.vch
0016 [I] 00000017 C:\Windows\SysWOW64\Macromed\Flash
0017 [I] 00000022 C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerPlugin_11_7_700_169.exe
0018 [I] 00000019 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl
0019 [W] 00001024 C:\Windows\SysWOW64\FlashPlayerCPLApp.cpl 183
0020 [W] 00001024 C:\Windows\SysWOW64\FlashPlayerApp.exe 183
0021 [I] 00000021 C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerUpdateService.exe
0022 [W] 00001106
0023 [W] 00001106
0024 [W] 00001024 C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerUpdateService.exe 183
0025 [I] 00000012
=X====== M/11.7.700.169 2013-04-22+08-46-41.948 ========Hi,
For those regarding iSpring user, we spent a lot of time in debugging that too.
here are the pieces we got and hope it helps.
The audio would got cut off once you tried to unload as2 swf. According to the SwfLoader doc, it would try to cut off all resources if possible (including audio object...). And it seems that their new flash player 11.7 would try to forcefully clear out stuffs that it shouldn't
Our hackaround is to call the netstream.seek() to trigger the sound again. Playing sound object doesn't work
Please adobe!! help us to keep our job here. It would be poor for us by just releasing a player without knowing which part of the backward compatibilities that it is about to break but just post a note on the page to say it may break something old.
Thanks,
Venant -
Java SCS add-in install Error: role ORA_SID is not created yet.
Greetings,
I'm trying to get the Java add-in installed on a recently upgrade BI 7.0 system (ABAP WAS) - NON-Unicode.
I'm erroring in SAPinst at "Defining the environment for user _______"
I have applied the changes recommended in note 921595 and continue to get the error.
Any seen this? I've opened a OSS note. However, they're no longer timely in thier replies......
Details:
Error - from the log
Account 200 already exists.
INFO 2006-12-22 17:01:56 [syuxccuren.cpp:543]
CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroup)
Effective group id set to 200.
INFO 2006-12-22 17:01:57 [syuxccuren.cpp:543]
CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroup)
Effective group id set to 206.
ERROR 2006-12-22 17:01:57 [iaxxinscbk.cpp:271]
abortInstallation
CJS-00030 Assertion failed: in
function (role) {
NWUsers.trace("NWUsers.getAccountData(", role, ")");
this._initAccountData();
ASSERT(arguments.callee, this.haveAccountData(role), "role " + role + " is not created yet.");
var ad = this._readAccountDataFromKeydb(role);
ad = this._readAccountData(ad);
var masterpwd = this.getMasterPassword();
if (ad.password == "" && this._useMasterPasswordForAccountData(ad) && ad.type == "USER" && masterpwd !== undefined && role != NWUsers.roles.J2EEGuest && !ad
.locked) {
ad.password = masterpwd;
NWUsers.trace("NWUsers.getAccountData(): ", dump_properties(ad));
return ad;
role ORA_SID is not created yet.
ERROR 2006-12-22 17:01:57
CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text
undefined.
ERROR 2006-12-22 17:01:57 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step setUserEnvironment with step key |NW_Addin_SCS|ind|ind|ind|i
nd|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0|setUserEnvironment was executed wi
th status ERROR .
INFO 2006-12-22 17:03:12 [iaxxgenimp.cpp:787]
showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Addin_SCS|ind|
ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0|setUserEnvironment".
iauxsysex.c:316: child 254136 has crashed. Executable directory is /usr/sap/put/
SCS/sapinst_exe.770326.1166835275. Contact Support.
iaextract.c:814: child has signaled an exec error. Keeping directory /usr/sap/pu
t/SCS/sapinst_exe.770326.1166835275
Kernel:
disp+work
disp+work information
kernel release 700
kernel make variant 700_REL
compiled on AIX 2 5 005DD9CD4C00
compiled for 64 BIT
compilation mode Non-Unicode
compile time Oct 29 2006 20:38:45
update level 0
patch number 83
source id 0.083
supported environment
database (SAP, table SVERS) 700Resolved - password only 6 characters - changed to 8 and good to go
-
8,1,1 post-install error message
Upon launching a document post-8.1.1 install, the following error message titled "AcroRd32.exe Application error" pops up:
The instruction at "0x2d830cbc" referenced memory at "0x00000008". The memory could not be "read".
What's my issue? HW? OS?Refer to Release Notes for 8.1.6, there are good instructions about JRE related installation problems.
-
SUN Java WebServer on Linux install error
Hi All
I am trying to install SUN JavaWebServer 6.1 SP2 on linux.
My environment is
Red Hat Enterprise Linux ES release 3 (Taroon Update 6)
Kernel 2.4.21-37.ELsmp on an i686
I am logged in as root.
I got the software sun-webserver61-rh72[1].tar.gz from sun site, after extracting when run using
./setup
After I pass through
1. accepting license
2.express install option,
3. /opt/SUNWwbsvr as location
4.install all components [1. Sun ONE Web Server, Enterprise Edition (2)] screens
I get thie error
ERROR: AdminSysUser not specified in install cache [tmp/fileACNAs8]
ERROR. Failure installing Server Core. Do you want to continue [n]?
and the installer terminates.
Can someone plese tell me the problem here.
Regards
bibI could install it in a different machine (linux). However on the machine it failed, it never asked me to enter the user name. Where do I enter it.
On the machine where I was succesfull, i was prompted to enter admin user name.
Thanks
bib -
Flash player 11.7.700 post install issues
installed Adobe flash player thru mozilla firefox, my os is windows XP , when I go online new tabs open telling me to install flash player even tho I already did. How do I make it stop opening these tabs?
It would really be helpful to see a screenshot. We've found in some cases these notifications aren't driven by Flash Player at all.
How do I capture and post a screenshot or video? -
BIP Desktop installation "java runtime environment not installed"
I keep getting the "java runtime environment not installed" error when I try to install BIP desktop.
I have JRE both as part of the BIP Enterprise Edition install and also because I installed (and reinstalled) SUN Java SDK.
Any help would be appreciated.I reinstalled JDK with the JRE. That seemed to do the trick.
-
Java Install error 1603 on Java 8u45
I am having issues getting Java to Install on a Windows 7 Pro PC in a stand alone environment.
Error Code 1603. Java is needed on this PC to be able to print shipping labels from FEDEX.com. I am trying to install using the administrator account. I have removed previous versions of Java. I have removed the MS updated KB2918614.
The java uninstall tool doesn't run because Java is required to run the java uninstall tool. I have run multiple Microsoft Fixit Tools. This is the second PC I have had this error with in this office. Does anyone have any thing more to offer that
might assist me. I have "Google'd" this error for 2 weeks now. Help would be greatly appreciated, Thank You!Hi,
According to official site of Oracle, This is a known issue with Microsoft KB2918614The root causes of these errors are under investigation. If this error still persists after uninstalled this update.
You could try following zooeyhall’s suggestion to download and install a previous version of Java or try creating a new administrative user account and install Java with the new account.
https://social.technet.microsoft.com/Forums/windows/en-US/78ac199b-316b-4fbc-8b2b-2c90e5425ff0/java-install-errors
Regarding to JAVA installation error, I’d suggest that we post at JAVA forum for further support. There you can get more effective suggestion by other experts who familiar with it. Your understanding is highly appreciated.
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
XML Publisher post-processing error 'java.io.FileNotFoundException'
Hi,
We are getting following XML Publisher post-processing error while running XML Publisher report.
It was working earlier but suddenly its erroring out.
[9/07/10 9:00:17 PM] [OPPServiceThread1] Post-processing request 559655.
[9/07/10 9:00:18 PM] [39177:RT559655] Executing post-processing actions for request 559655.
[9/07/10 9:00:18 PM] [39177:RT559655] Starting XML Publisher post-processing action.
[9/07/10 9:00:18 PM] [39177:RT559655]
Template code: XXHPOXPRRFLR
Template app: XXH
Language: en
Territory: 00
Output type: PDF
[9/07/10 9:00:18 PM] [UNEXPECTED] [39177:RT559655] java.io.FileNotFoundException: /apps/oracle/DEV/inst/apps/DEV_hlt439erplap001/logs/appl/conc/out/o559655.out (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:274)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:173)
[9/07/10 9:00:18 PM] [39177:RT559655] Completed post-processing actions for request 559655.
Please help me out to resolve this issue.
Thanks & Regards,
SagarikaHi,
java.io.FileNotFoundException: /apps/oracle/DEV/inst/apps/DEV_hlt439erplap001/logs/appl/conc/out/o559655.out (No such file or directory)Most probably this file is not created (since no changes have been done recently, so definitely it is not a permission issue), and if there are any log files generate at the client side it should help in investigating the issue.
Thanks,
Hussein -
Getting error while running command java -jar oc4j.jar -install
java -jar oc4j.jar -install
ON RUNNING The above command getting below error , is it because Java home is not set?
Warning: -jar not understood. Ignoring.
Exception in thread "main" java.lang.NoClassDefFoundError: oc4j.jar
at gnu.gcj.runtime.FirstThread.run() (/usr/lib/libgcj.so.5.0.0)
at JvThreadRun(java.lang.Thread) (/usr/lib/libgcj.so.5.0.0)
at JvRunMain(java.lang.Class, byte const, int, byte const, boolean) (/usr/lib/libgcj.so.5.0.0)
at __gcj_personality_v0 (/oracle/u01/app/oracle/product/10.2.0/db_1/oc4j/j2ee/home/java.version=1.4.2)
at __libc_start_main (/lib/tls/libc-2.3.4.so)
at JvRegisterClasses (/oracle/u01/app/oracle/product/10.2.0/db_1/oc4j/j2ee/home/java.version=1.4.2)
navisdb.igglobal.com(express)$ javac
ksh: javac: not found
ENVIORNMENT DETAIL : RED HAT LINUX ENTERPRISE EDITION
Extracted OC4J_extended.zip file at oracle 10g installation location.does this command work?
/home/oracle:MCSE>gij --showversion
gij (GNU libgcj) version 3.4.6 20060404 (Red Hat 3.4.6-11) -
Errors During Post Install Check on Ubuntu 12.04
Hello Gurus,
I'm trying to install EBS R12(12.1.1) on Ubuntu 12.04 64-Bit. I patched the HTTP server with 6078836 (Copied libdb.so.2 to /usr/lib).
I did the md5sum check before starting the install. I completed the kernel settings as per the note below:
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
Contents of /etc/hosts
127.0.0.1 localhost.localdomain localhost
192.168.1.101 erpbeginner.dyndns.org erpbeginner
Installation went smooth till the Post install checks where it fails for the following:
HTTP
JSP
Login Page
Help Page
Virtual Directory
Contents of the log file:
command: /d01/stage/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /d01/r12/VIS/db/tech_st/11.1.0/VIS_erpbeginner.env APPS/APPS
riwTDBup.sh started at Tue Oct 16 07:30:46 EDT 2012
Parameters passed are : /d01/r12/VIS/db/tech_st/11.1.0/VIS_erpbeginner.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /d01/r12/VIS/db/tech_st/11.1.0
ORACLE_SID : VIS
TWO_TASK :
PATH : /d01/r12/VIS/db/tech_st/11.1.0/perl/bin:/d01/r12/VIS/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/d01/r12/VIS/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/d01/stage/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:.
LD_LIBRARY_PATH : /d01/r12/VIS/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/r12/VIS/db/tech_st/11.1.0/lib:/usr/dt/lib:/d01/r12/VIS/db/tech_st/11.1.0/ctx/lib
Executable : /d01/r12/VIS/db/tech_st/11.1.0/bin/sqlplus
riwTDBup.sh exiting with status 0
Database ORACLE_HOME connection test has succeeded
command: /d01/stage/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /d01/r12/VIS/inst/apps/VIS_erpbeginner/ora/10.1.2/VIS_erpbeginner.env APPS/APPS
riwTDBup.sh started at Tue Oct 16 07:30:47 EDT 2012
Parameters passed are : /d01/r12/VIS/inst/apps/VIS_erpbeginner/ora/10.1.2/VIS_erpbeginner.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /d01/r12/VIS/apps/tech_st/10.1.2
ORACLE_SID :
TWO_TASK : VIS
PATH : /d01/r12/VIS/apps/tech_st/10.1.2/bin:/usr/bin:/usr/sbin:/d01/r12/VIS/apps/tech_st/10.1.3/appsutil/jdk/jre/bin:/usr/bin:/d01/stage/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
LD_LIBRARY_PATH : /d01/r12/VIS/apps/tech_st/10.1.2/lib32:/d01/r12/VIS/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/r12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386:/d01/r12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/d01/r12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads:/d01/r12/VIS/apps/apps_st/appl/sht/12.0.0/lib
Executable : /d01/r12/VIS/apps/tech_st/10.1.2/bin/sqlplus
riwTDBup.sh exiting with status 0
sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
Apps ORACLE_HOME connection test has succeeded
Configuration Upload
uploading config file at /d01/r12/VIS/db/tech_st/11.1.0/appsutil/conf_VIS.txt
AppsConfig : 'config.txt' uploading...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : erpbeginner
sDbDomain : dyndns.org
sDbPort : 1521
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@erpbeginner.dyndns.org:1521:VIS
Connection obtained
-------------------ADX Database Utility Finished---------------
Successful upload of config file at /d01/r12/VIS/db/tech_st/11.1.0/appsutil/conf_VIS.txt
Environment File
Database ORACLE_HOME environment file passes instantiated variables test:
File = /d01/r12/VIS/db/tech_st/11.1.0/VIS_erpbeginner.env
Apps ORACLE_HOME environment file passes instantiated variables test:
File = /d01/r12/VIS/inst/apps/VIS_erpbeginner/ora/10.1.3/VIS_erpbeginner.env
iAS ORACLE_HOME environment file passes instantiated variables test:
File = /d01/r12/VIS/inst/apps/VIS_erpbeginner/ora/10.1.2/VIS_erpbeginner.env
APPL_TOP environment file passes instantiated variables test:
File = /d01/r12/VIS/apps/apps_st/appl/VIS_erpbeginner.env
ADOVARS environment file passes instantiated variables test:
File = /d01/r12/VIS/apps/apps_st/appl/admin/adovars.env
APPSCONFIG passes instantiated variables test:
File = /d01/r12/VIS/apps/apps_st/appl/admin/adconfig.txt
DBC File
DBC file passes instantiated variables test:
File = /d01/r12/VIS/inst/apps/VIS_erpbeginner/appl/fnd/12.0.0/secure/VIS.dbc
HTTP
checking URL = http://erpbeginner.dyndns.org:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Help Page
checking URL = http://erpbeginner.dyndns.org:8000/OA_HTML/help
RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Virtual Directory
RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP
checking URL = http://erpbeginner.dyndns.org:8000/OA_HTML/jtfTestCookie.jsp
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Login Page
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
When I search for the library "libclntsh", I found 3 matches to libclntsh.so.11.1,libclntsh.so.10.1 and libclntsh.so.
Only libclntsh.so.11.1 is a file and rest are symbolic links to this file which seem to be broken.
So I tried to redo the symbolic links and did a retry for the post install checks which failed again.
Can somebody please shed some light on this?
Best Regards,
RichieI'm trying to install EBS R12(12.1.1) on Ubuntu 12.04 64-Bit. Please note that this OS is not certified.
sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directoryPlease see the suggested solution in (Installing R12.0.4 Ebuisines Suite Autoconfig Fails With: sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory [ID 579254.1]). Also, please make sure you have all RPMs installed as per (Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4) for Linux (64-bit) [ID 416305.1]) and follow all post installation steps.
Thanks,
Hussein -
Hi
I have VS 9 installed and was wanting to install LightSwitch so downloaded the ISO(VSLS2011_ENU.iso) and burnt to disk ran
setup.exe and received the this message.
"Setup could not install the following component:
Microsoft ApplicationError Reporting"
The log shows..
[02/09/15,13:52:02] Microsoft Application Error Reporting: [2] CMsiComponent::Install() expects the setup file for Microsoft Application Error Reporting, but the file failed verification.
[02/09/15,13:52:03] setup.exe: [2] ISetupComponent::Pre/Post/Install() failed in ISetupManager::InternalInstallManager() with HRESULT -2147467259.
[02/09/15,13:52:04] SimpleUI: [2] DepCheck indicates Microsoft Application Error Reporting is not installed.
[02/09/15,13:52:05] SimpleUI: [2] DepCheck indicates VC 9.0 Runtime (x86) was not attempted to be installed.....
.NetFramework 3.5
C:\Users\xxxxxx>Winmgmt /verifyrepository
WMI repository is consistent.
PC is win 7 pro 64bitHi ghw123,
Welcome to Lightswitch forum.
According to the error message above, this issue is related to verification. For this issue, you need make sure that you download VSLS2011_ENU.iso from Microsoft official site, see:
http://download.microsoft.com/download/8/0/0/80047AD9-1D3E-46EB-8CF8-DFDA59E7799D/VSLS2011_ENU.iso
In addition, if you want to learn LightSwitch, I'd like to suggest you to download VS2012 or VS2013, many new features are added to them. see:
http://www.visualstudio.com/en-us/downloads
You need select the Lightswitch option when you install VS2012/VS2013.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
When I try to enter text in any text-entry box, i.e, in the url , search, or on a website, the virtual keyboard doesn't activate. I have to manually activate and deactivate it. It works for Google Chrome, but sadly not for firefox, my preferred brows
-
Can I get my money back? (UK)
Hi all, I'm hoping for advice here. I live in the UK, so I could do with knowing what my rights are here. Anyway, here is the situation: I own an Apple Cinema Display 20. It is less than a year old. I really dislike it, and I would like my money back
-
Hi, I have to connect Oracle form with MS Access database. I have used ODBC to connect but failed and got error Ora-03121. Can someone help me to do it. Regards, Muazzam
-
Open the excel spreadsheet in Excel.
Hi, I am outputing data as an excel spreadsheet via jsp, but there are no toolbars etc available (for sorting, etc) when displayed within the browser. Is it possible to always open the excel spreadsheet in the Excel-application (even if the user/clie
-
How can i upgrade from os 10.5.8
I need to upgrade from 10.5.8. What is the easiest way to do that?