Java Communication error:Error while opening an RFC connection
Hi,
I am getting Java Communication error:Error while opening an RFC connection when i try to run a query from Bex analyser.
please let me know how to resolve this
Thanks
Bala Duvvuri
This error usually comes when the java stack is not upgraded.
when you upgrade yourABAP stack, simultaneously you have to upgrade the java stack also.
Please co-ordinate with your basis team to inform EP team to upgrade the java stack when basis team do ABAP stack upgrade.
Hope this would help you.
Similar Messages
-
SLD Configuration : Error opening an RFC Connection
Hi All,
I am working on EP6 SP19 and trying to configure SLD.
I was trying to check the data collection with the transaction RZ70,and I got the following error:
Data collected succesfully
Used RFC Destination: SLD_NUC
RFC call failed: Error opening an RFC Connection
Existing periodic jobs removed, number: 1
Program scheduled: 20070327
Event controlled job already exists,scheduling not necessary
I performed the follloewing steps:
I have imported CRContent.zip succesfully.
I have configured the data supplier bridge with following parameters.
Update local SLD (sld/active): TRUE
RFC Gateway:
Server : <host name of J2EE server>
Service : <The SAP gateway service port> (here I gave sapgw00)
This gateway service is installed while installing WAS Java.
Please clarify if I can use the same or Do I need to install standalone gateway instance?
I restarted the Data supplier bridge it is running.
I have created RFC destinations through visual administrator with
JCO RFC provider and used the same name for the program id
in RFC destination of SM59
Once the above steps are done,I am getting the error.(Error opening RFC)
Please give me a clue of wat else do I need to do?
Regards,
SanthoshHi,
check the following once.
How to configure the R/3 system as technical system into portal is follows.
U need to add some properties in VA.
Then only it will works.
U can goto the VA and in SLD data supplier add some properties like this.
1)HTTP settings: host = poratl host , port=50000 ,user = portal username , pwd=give thepwd.
2)RFC settings : Gateway host= poratl host and Gatewayservice=sapgw00
3)CIM client generation settings :host and port are the same as above and user and PWD same above
After this u need to check the Cimclicnt and that shows success.
And finally u need to go to the SLD add ur r/3 system properties and and ip address and host name in the host file of ur windows.
and finally add message server host in the services file in ur windows.
Have you checked the JCo destinations And SLD connetions.
If all are correct then u can add the properties in the Application server
Host file add the IP address and alias name
C:\WINDOWS\system32\drivers\etc\host
in services file add the <Messageserverhost> 3600/tcp.
C:\WINDOWS\system32\drivers\etc\services.
Then it might helps you.
Thanks,
Lohi. -
Hi,
I'm getting the below error for reports.
The report terminated with error:
REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File test2. cannot be opened. .
When checked Environment using url 'http://host:port/reports/rwservlet/showenv?server=your_repserver_name"
found below
==================================================
Reports Servlet Environment Variables 11.1.1.4.0
Security Mode Non-secure
HTTP Environment Variables 11.1.1.4.0
SERVER_NAME 09.14.4.41
SERVER_PORT 8888
SCRIPT_NAME /rwservlet
SERVER_PROTOCOL HTTP/1.1
SERVER_SOFTWARE undefined
GATEWAY_INTERFACE undefined
SERVER_PORT_SECURE undefined
ACCEPT image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
REQUEST_METHOD GET
REMOTE_HOST test-wam-app
REMOTE_ADDR 09.14.4.41
REMOTE_USER undefined
AUTH_TYPE undefined
PATH_INFO showenv
QUERY_STRING server=RptSvr_test-wam-app_wamtest
PATH_TRANSLATED undefined
CONTENT_LENGTH undefined
CONTENT_TYPE undefined
AUTHORIZATION undefined
USER-AGENT Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.2; Trident/6.0; .NET4.0E; .NET4.0C; .NET CLR 3.5.30729; .NET CLR 2.0.50727; .NET CLR 3.0.30729; InfoPath.3; MS-RTC LM 8)
REMOTE_IDENT undefined
REFERER undefined
Oracle Reports Services - Servlet Environment Variables Select to jump to the top of the page Return to Top
KeyMapFile /u03/apptest/FMW_11.1.1/user_projects/domains/WamTest/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/cgicmd.dat
DBAUTH /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwdbauth.htm
SYSAUTH /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwsysauth.htm
server rep_wls_reports_test-wam-app_wamtest1
DIAGNOSTIC yes
ERRORTEMPLATE /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwerror.htm
SERVER_IN_PROCESS yes
COOKIEEXPIRE 30
ENCRYPTIONKEY reports9i
DIAGHEADTAGS undefined
DIAGBODYTAGS undefined
HELPURL undefined
RELOAD_KEYMAP undefined
IMAGEURL http://09.14.4.41:8888/reports/rwservlet
SINGLESIGNON no
Oracle Reports Services - Server and Engine Environment Variables Select to jump to the top of the page Return to Top
PATH /u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/java/jdk1.6.0_23/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
DISPLAY
LD_LIBRARY_PATH /u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/../lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/opmn/lib:/u01/wamtest/FMW_11.1.1/apphome/lib
ORACLE_HOME /u01/wamtest/FMW_11.1.1/apphome
TNS_ADMIN /u01/wamtest/FMW_11.1.1/instance1/config
NLS_LANG AMERICAN_AMERICA.WE8ISO8859P1
USER_NLS_LANG
RW /u01/wamtest/FMW_11.1.1/apphome/reports
REPORTS_PATH /u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:/u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:
REPORTS_TMP /tmp
REPORTS_TAGLIB_URI /WEB-INF/lib/reports_tld.jar
java.class.path /u01/wamtest/FMW_11.1.1/apphome/reports/jlib/rwrun.jar
sourceDir
tempDir
useDataCache
ignoreDataParameter
=========================================================================
ORACLE_HOME is on mount point u03, checked config.properties but no mention of mount point /u01.
Dont know from where /u01 came. Could you please help me re configuring the env pointing to /u03.
Reports server is up though without any issues.
Regards,
DjayEnsure that the report name is correct. Also ensure that the report exist in REPORTS_PATH environment variable. Otherwise run the report including the reports path.
E.g.
report=<reports directory>/test2.rdf -
Hi,
We update the BW landscape for version 7.4 suppport package 4 (whitout HANA).
We use a external system connection to extract data from a SQLServer database (Microsoft Connector 1.1 for SAP/BW)
In the previous version (BW 7.0.1 SP 10) run correctly, but now is in error.
Below the BW error log:
Error: COMMUNICATION_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target system SQLIS.
Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679 Transaction program not regist).
Error log of Integrations Services
[SAP BI Destination 1 [476]] Error: Microsoft.SqlServer.Dts.SapBw.Connectivity.ERPException: An error occurred during the dispatch of the incoming function. The last return code was "RFC_FAILURE".
em Microsoft.SqlServer.Dts.SapBw.Components.SapBwSourceBWLoader.ProcessInput(Int32 inputID, PipelineBuffer buffer)
em Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100 wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SAP BI Destination 1" (476) failed with error code 0x80131500 while processing input "SAP BI Destination Input" (491). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I checked the topic and notes below, but without success
CPIC Return Code 679 - Transaction Program not Registered - ABAP Connectivity - SCN Wiki
Note 1480644 - gw/acl_mode versus gw/reg_no_conn_info.
Note 353597 - Registering RFC server programs
Regards,
BrunoHi Bruno,
We were able to resolve the issue. SAP RDS is assisting us with our upgrade and one of their consultants gave us this fix/workaround.
Edit and add an entry into P:\usr\sap\<SID>\DVEBMGS00\data\reginfo.dat on your BW host server.
Below is the entry I added.
P TP=<NAME OF PROGRAM ID> HOST=<remote hostname where you creating the RFC to> CANCEL=<remote hostname> ACCESS=*
P TP=CTSAPNPSCI_PORTAL_FPS HOST=ctsapnpsci CANCEL=ctsapnpsci ACCESS=*
Then in BW system goto smgw > goto > Expert Funtions > External Security > ReRead ACL (N) & Globally
I hope that this works for you.
Regards
James -
Error when opening an RFC connection in IDT
Hi Experts,
I m trying to create a relational connection (JCO) from IDT to BW 7.4, and I m getting the following error:
Error when opening an RFC connection (CPIC-CALL: ' ThSAPOCMINIT', communication
I searched this error in Internet and I found many discussions about it ...And I think it's about autorizations in BW system that by default dosen't allow external servers to connect to it.
So, I changed the values for the following parameters in RZ11 t-code:
gw/acl_mode = 0
gw/reg_no_conn_info = 0
But I still get the same error ...When I checked the SM59 t-code I found that IDT create an entry in TCP/Ip connections ...
Can you guide me to solve this issue...
BW server is 7.4 version on AIX OS
BO server is 4.1 SP05 on windows system
Thank's a lot for your help.
Abdess,Hi,
test the RFC connection in sm59.If it is sussecfull then try to create conneciton otherwise see the error message.
Amit -
Dear all,
i am test the report to show "No Data Found" world, but, when i preview to PDF, i got the message :An error occurred while opening the file, you can not open this file because it does not page.
i try to load the other xml file that have data, and report work,no error.
i don't know where is the problem, so i need some help....
Thanks in advance for your response.
my rtf report:
<?call:header?>
<?if:count(PLAN_CODE)>0?>
<?for-each@section:G_PLAN_CODE?>
<?template:Header?>
<?for-each:G_PURPOSE?>
<?end for-each?>
<?end template?>
<?for-each:G_PLAN_SUBSQL2?>
<?end for-each?>
<?end for-each?>
<?end if?>
<?if:count(PLAN_CODE)=0?>
====================No Data Found ===================
<?end if?>
about xml:
if no data query back:
<?xml version="1.0"?>
<!-- Generated by Oracle Reports version 6.0.8.27.0 -->
<NARLGLR005>
<LIST_G_PLAN_CODE></LIST_G_PLAN_CODE>
<CF_START_DATE>102.3</CF_START_DATE>
<CF_END_DATE>102.3</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>
if have data:
<?xml version="1.0"?>
<!-- Generated by Oracle Reports version 6.0.8.27.0 -->
<NARLGLR005>
<LIST_G_PLAN_CODE>
<G_PLAN_CODE>
<PLAN_CODE>03101C3003</PLAN_CODE>
<PLAN_NAME>03101C3003_test</PLAN_NAME>
<PLAN_EM>John</PLAN_EM>
<PLAN_START_DATE>101.09.01</PLAN_START_DATE>
<PLAN_END_DATE>102.08.31</PLAN_END_DATE>
<PLAN_HOSTS>abc_super</PLAN_HOSTS>
<LIST_G_PURPOSE>
<G_PURPOSE>
<PURPOSE_CODE>11600000</PURPOSE_CODE>
<PURPOSE_NAME>Pre-Pay</PURPOSE_NAME>
<LIST_G_PURPOSE_CODE>
<G_PURPOSE_CODE>
<BUDGET_AMOUNT>0</BUDGET_AMOUNT>
<REAL_BUDGET_AMOUNT>0</REAL_BUDGET_AMOUNT>
<TEMP_RECEIPT_AMOUNT>0</TEMP_RECEIPT_AMOUNT>
<REAL_PAY_AMOUNT>0</REAL_PAY_AMOUNT>
<TEMP_PAY_AMOUNT>-83006</TEMP_PAY_AMOUNT>
<TEMP_PAY_FINAL_AMOUNT>83006</TEMP_PAY_FINAL_AMOUNT>
<TOTAL_AMOUNT>83006</TOTAL_AMOUNT>
</G_PURPOSE_CODE>
</LIST_G_PURPOSE_CODE>
<CS_BUDGET_AMOUNT>0</CS_BUDGET_AMOUNT>
<CS_REAL_BUDGET_AMOUNT>0</CS_REAL_BUDGET_AMOUNT>
<CS_TEMP_RECEIPT_AMOUNT>0</CS_TEMP_RECEIPT_AMOUNT>
<CS_REAL_PAY_AMOUNT>0</CS_REAL_PAY_AMOUNT>
<CS_TEMP_PAY_AMOUNT>0</CS_TEMP_PAY_AMOUNT>
<CS_TEMP_PAY_FINAL_AMOUNT>0</CS_TEMP_PAY_FINAL_AMOUNT>
<CS_TOTAL_AMOUNT>0</CS_TOTAL_AMOUNT>
</G_PURPOSE>
</LIST_G_PURPOSE>
<LIST_G_PLAN_SUBSQL2>
<G_PLAN_SUBSQL2>
<GL_DATE>31-07-12</GL_DATE>
<NARL_DOC_NUMBER>0310107311004</NARL_DOC_NUMBER>
<AP_UNAPP></AP_UNAPP>
<PLAN_NAME1>03101C3003_101-102</PLAN_NAME1>
<PLAN_CODE1>03101C3003</PLAN_CODE1>
<PLAN_EM1>Elly</PLAN_EM1>
<PLAN_START_DATE1>2012/09/01 00:00:00</PLAN_START_DATE1>
<PLAN_END_DATE1>2013/08/31 00:00:00</PLAN_END_DATE1>
<PLAN_HOSTS1>KIC-Supp</PLAN_HOSTS1>
<REAL_RECEIPT_AMOUNT>0</REAL_RECEIPT_AMOUNT>
<DESCRIPTION>101 year</DESCRIPTION>
<CF_GL_DATE>101.7.31</CF_GL_DATE>
</G_PLAN_SUBSQL2>
</LIST_G_PLAN_SUBSQL2>
<CF_START_DATE1>99.1</CF_START_DATE1>
<CF_END_DATE1>102.11</CF_END_DATE1>
<CF_TITLE_NAME1>TCS Company</CF_TITLE_NAME1>
<CF_OU_NAME1>IT Department</CF_OU_NAME1>
<CF_SOURCE_CODE1>plan</CF_SOURCE_CODE1>
<CF_PRINT_DATE1>102.11.19 17:12:19</CF_PRINT_DATE1>
<CS_T_BUDGET_AMOUNT>517524</CS_T_BUDGET_AMOUNT>
<CS_T_REAL_BUDGET_AMOUNT>517524</CS_T_REAL_BUDGET_AMOUNT>
<CS_T_TEMP_RECEIPT_AMOUNT>289294</CS_T_TEMP_RECEIPT_AMOUNT>
<CS_T_REAL_PAY_AMOUNT>289294</CS_T_REAL_PAY_AMOUNT>
<CS_T_TEMP_PAY_AMOUNT>0</CS_T_TEMP_PAY_AMOUNT>
<CS_T_TEMP_PAY_FINAL_AMOUNT>0</CS_T_TEMP_PAY_FINAL_AMOUNT>
<CS_T_TOTAL_AMOUNT>228230</CS_T_TOTAL_AMOUNT>
<CS_REAL_RECEIPT_AMOUNT>289294</CS_REAL_RECEIPT_AMOUNT>
</G_PLAN_CODE>
</LIST_G_PLAN_CODE>
<CF_START_DATE>99.1</CF_START_DATE>
<CF_END_DATE>102.11</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>Hi,
You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
Click Start, right-click Computer, click
Properties, and then click Advanced system settings.
On the Advanced tab, click Environment Variables.
Locate and select the __COMPAT_LAYER variable, and then click Edit.
Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support -
STMS: RFC error: Error when opening an RFC connection
Hello ,
I was wondering if you could help me with this TMS issue.
The transport system is not working properly.
The fallowing error is shown:
Could not start transport control program tp
RFC error: Error when opening an RFC connection
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 3
RFC error text: Error when opening an RFC connection
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then execute the command again.
When I test the tp tools:
tp Call and RFC Ping: Error when opening an RFC connection
Another thing would be that when testing the RFC connection CALLTP_Linux I have the error:
ERROR: user XXX is not authorized to start TP /usr/sap/SID/DVEBMGS53/exe
And I have to say that the user has maximum authorizations.
I also checked the permissions of the tp at OS level but everything seems to be ok.
Can you help me with this?
BR,
ManolivDear Manoliv,
Firstly please check if you have enough space in /usr/sap/trans file system.
If OK, please run RSTPTEST report from SE38 and check the log file in SMGW => Goto => Trace => Gateways => Display file
and paste the log here.
Also, I assume filesystem permissions are OK.
Regards,
Sujit. -
WORKLOAD ANALYSIS (INTROSCOPE DATA) - Error when opening an RFC connection
Hi all SDNers,
Help is needed on error "WORKLOAD ANALYSIS (INTROSCOPE DATA) - Error when opening an RFC connection".
This error occured on RCA -> Extractor FWK administration and go to managed system (PI) and from the log, i can see some extraction failed due to error message " Error when opening an RFC connection"
consequently, JAVA performance data is not appearing in RCA -> workload analysis but work fine for ABAP and adapter engine.
I've followed below notes and perform the troubleshooting step by step by still to no avail:
Note 1332428 - Missing data in service sessions from BI/CCDB
Note 1257308 - FAQ: Using EarlyWatch Alert
Note 1274287 - End-to-End Diagnostics 7.0 EHP1 SP18 to SP27
Note 1265070 - Diagnostics - Setup of Managed Systems
Note 1010428 - End-to-End Diagnostics
http://wiki.sdn.sap.com/wiki/display/SMSETUP/WorkloadAnalysis-Noapplicabledatafound
steps that have performed:
restarted agent
enlarge RFC resource cap for solmandiag and none
delete entire SID in SMSY and pull again from SLD, re-setup managed system
restart PI system
i've spent 2 days on troubleshooting this issue but lack of information in SMP and SDN, even in google.
in table E2E_EFWK_STATUS and extractor E2E_JAVA_EXTRACTOR_IF, i see all WLI_ID ended with RC 96, MESSAGE = Error when opening an RFC connection and LASTRECORDS = 0
I strongly believe this is the issue that causing no applicable data found for JAVA data.
fyi, we are on SOLMAN EHP1 SPS27.
Any kind advise is most welcome.
Thanks,
Nicholas ChangGosh! at last i found the solution!!
I appreciate those who tried to help and i''m sharing the solution as i believe this is the purpose of SDN Forum and help others Netweaver Chap who facing the same problem:
Problem faced:
Extractor failed intermittently for WORKLOAD ANALYSIS (Introscope Data) due to error message "Error when opening an RFC connection"
Due to the above error, performance data is not available in RCA workload analysis for J2EE engine.
Possible Solution:
1) Ensure both webadmin & SOLMANDIAG RFC working fine -> SM59 -> TCP/IP
2) go to SE16 -> E2E_RESOURCES and change the resourcecap to 10 for SOLMANDIAG
3) go to /smd/services -> Diagnostic System -> Advanced Setup -> Abap connectivity -> Connection Configuration and change server count to 10
4) Restart webadmin (step 3 & 4 can perform in VA too)
5) set gw/keepalive & gw/reg_keepalive to value 0 in RZ11 (without reboot of instance)
5) again go to SM59 -> TCP/IP -> SOLMANDIAG and put in the gateway host and gateway service correctly, don't leave this empty!!!! -
> This is the main solution to solve intermittent failed RFC for extractor.
Now, go back and monitor the extractor log and you should see no RFC error anymore and wait for 1 hour for the data to populate.
Thanks!
Nicholas Chang, -
TMS - Error when opening an RFC connection
Hi,
TMS communication error with TMSADM@<SID>.DOMAIN_<SID>
Message no. XT153
Diagnosis
There was an error during communication with the RFC destination
TMSADM@<SID>.DOMAIN_<SID>
System Response
The exact error message of the system is:
Error when opening an RFC connection
Procedure
The function terminates.
Procedure for System Administration
Check your TMS configuration with the transaction STMS.
when i check RFC connections through sm59 its working fine.
plz advise.
Thanks in advance.try to reconfigure STMS easy way to soluve your problem
or goto STMS -> system overview try to update the configuration
Samrat -
RFC Error:Error When opening an RFC Connection
Hi All,
When im trying the following, RFC error is thrown:
TCODE DSWP->EDIT->Fetch SAP Components
The Error is:
RFC Error:Error When opening an RFC Connection
Also I have checked in SM59, the following 3 RFC Connections are throwing error:
SAP-OSS
SAP-OSS-LIST-O01
SAPOSS
Kindly suggest me to do the workarounds.
Thanks and Regards,
FaisalHi Raguraman,
Following is the error text for RFC Connection SAP-OSS
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: timeout while pending for route completion
Error Details LOCATION: SAP-Server SMGDCS1S_D18_01 on host SMGDCS1S (wp 1)
Error Details DETAIL: NiErrSet
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 3
Error Details MODULE:
Error Details LINE:
Error Details RETURN CODE: -12
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Fri May 02 00:33:48 2008
Error Details VERSION: 38
Kindly do the needful.
Regards,
Faisal -
In PowerPoint 2013 on Windows 7 - 64 bit, when
File / Save as is selected, an error message comes up stating, "An error occurred while opening the file dialog. Please save your presentation, exit, and restart PowerPoint." This is an intermittent issue and also
affects Excel 2013. I have tried repairing it, done windows update and also uninstalled and reinstalled but no luck. I have researched this issue but it relates to Office 2007 and 2010 and the resolution does not support 2013.
Has anyone come across this issue? If so how did you resolve it?
Many thanks….Hi,
You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
Click Start, right-click Computer, click
Properties, and then click Advanced system settings.
On the Advanced tab, click Environment Variables.
Locate and select the __COMPAT_LAYER variable, and then click Edit.
Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support -
Error opening an RFC connection
Hello guys,
I am gettinga following Error "Error when determining the receiver: Problem when determining the receiver when using the Interface Mapping: "COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection. Problem when determining the receiver when using the Interface Mapping: "COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection. "COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection.</"
Can someone help me out in this?
Thanks
SahilCheck these solved discussions:
SOAP scenario
JCO_COMMUNICATION_FAILURE Error at message procesing
Regards,
Abhishek. -
Hi Experts,
I am having an issue while opening a web analysis dashboard report. When I try opening it, web analysis runs for about 15 mins & then throws following error:
Error occured while opening document. Document ID = {0}
The report opens with its header having company log & two buttons, but data grid remains empty.
The source of Grid is Essbase. The tunning parameters in Essbase.cfg file are in place.
Could anyone please through more observation on this issue. Let me know if any further information is needed!.
Kindly suggest me any way to resolve it.
Thanks,
KrishanThe isapi (if you use one) timeout setting might be smaller than the time essbase needs to retrieve te information.
but most probably the analysis applicationserver jre heapsize is either to small or needs to much time to allocate it. Be sure to increase heapsize and set max equal to min (try 800mb, if your hardware has that resource) -
Error occurred while opening Web Analysis document.
Hi all,
I've a problem when i try to open some web analysisi report from work space that first worked fine.
The error is:
Error occurred while opening document.
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native: -2147219967 Error Reference Number: {3507FEFB-B38E-4B36-9399-5F3E6B5FAC6A}<BR>Num: 0x80040601;Type: 1;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: CHsvADMDriverACM2.cpp;Line: 2360;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1491;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1245;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1203;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1067;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1390;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1331;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1292;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 603;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: CHsvADMDriverACM2.cpp;Line: 580;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: CHsvADMDriverACM2.cpp;Line: 785;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPWEB;File: CHsvDataQueryResults.cpp;Line: 209;Ver: 9.3.1.0.1502;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPWEB;File: HsvADMDriverSessionInternal.cpp;Line: 4353;Ver: 9.3.1.0.1502;
Can someone help me on this?
Thanks
Best Regards
E. G.Can anyone help me too?
-
Hi Experts,
I am having an issue while opening a web analysis dashboard report. When I try opening it, web analysis runs for about 15 mins & then throws following error:
Error occured while opening document. Document ID = {0}
The report opens with its header having company log & two buttons, but data grid remains empty.
Kindly suggest me any way to resolve it.
Thanks,
KrishanHi Natesh,
Thanks for your reply to my query posted in this forum. Please find my inline answers between asterisk to your questions:
Whatz the source of your Grid? Relational SQL Query (OR) A spreadsheet with Essbase database connection file?
* Yes, the source is Essbase.*
If source is Essbase, it seems- Outline might've got altered when you're trying to refresh the report.
* The outline was in tandem when we tried running this report in WebAnalysis. This outline & WebAnalysis report which is in Dev Server is a replica of the one in Test Server where it runs fine. *
If source is based on a Relational SQL query, chances are that- Query is no longer valid.
* NA as this statement is NOT applicable to our source.*
If it's Essbase, it's also likely that- It ran out of time while fetching the data from Essbase. You may try playing around with the parameters in Essbase.cfg file.
* This might be one of the causes, but I double checked the all the tunning parameters in Essbase.cfg file in place.*
Could you please through more observation on this issue. Let me know if any further information is needed!.
Thanks for your time.
Regards,
Krishan
Edited by: user10475612 on Nov 8, 2009 1:07 PM
Edited by: user10475612 on Nov 8, 2009 1:09 PM
Edited by: user10475612 on Nov 8, 2009 1:12 PM
Maybe you are looking for
-
BC 2LIS_02_ITM extractor
I am having a requirement where i am getting the fields from R/3 system ie MM application to BW. Here while extracting the data logic has been defined by the MM consultant. Most of the fields which r used in the BW reports are coming from 2LIS_02_ITM
-
Hi! Inbox of the yahoo mail is able synchrinise to update but the sent folder does not synchronise and gives following message .."update your account information for winmo.smtp.mail.yahoo.com:465:1 and press save..". Can somebody help how to resolve
-
Macbook freezing on certain programmes.
So my Macbook Pro is freezing when I play games such as "League of Legends", depending whether its full screen or windowed it freezes, so if its on full screen at the time I have to restart, but if its windowed I can close and reopen. My Mac sounds l
-
I know that this has been beaten to a pulp, but having issues myself and have not been able to find an answer. Hard drive failure in my server, so re-installed and updated everything to 10.7.5 without any issues, 1000+ users recreated. Sharepoints se
-
hi guys! i need a report based upon gr. I know the table is MSEG and MKPF. I am also aware of all standard reports. still i want to proceed. one way is using query( sq01). Is there any other way to retrieve datas from the table directly from se11..