Java Version for ERP 2005 and Oracle 10.2.0.1

Hi all,
I've just a question. I'm trying to install ERP2005 on Windows 2003 Server with Oracle 10.2.0.1.
But the process terminates at the step "Import ABAP" with the error messages concerning "CJS-30022 Program 'Migration Monitor' exits with error code 103 " and " FCO-00011 The step runMigrationMonitor with step key".
I've had a similiar abort with another installation. Could the java version cause this error? Which java version is recommended as standard in regard to our ERP2005-installation?
Please help me !!
Thanks in advance.

10.2.0.1 is not supported.
you have directly update 10.2.0.1 after the installation to 10.2.0.2 and then install at least hotfix 10.2.0.2.12 (current is 10.2.0.2.13).
Using older version of Oracle 10.2.0.2.12 will cause a lot of problems.
By the way, are you installing a blank new ERP2005 or are you performing a systme copy?
Peter

Similar Messages

Differences between Product Version SAP ERP 2005 and SAP ECC 6.0

Hello Guys,
I have to setup an new XI interface between two R/3 system. During Integration Scenario setup you have to select under Application Component Type the Product version for the R/3 systems.
Now, i am able to select SAP ERP 2005 or SAP ECC 6.0 from menu
Could someone tell me the differences between SAP ERP 2005 and SAP ECC 6.0. Both are listed as Product Versions.
Thanks in advance!
Jochen

SAP ECC 6.0 is latest version 2005 is last year version . as you are intergatin between 2 . you need select accordingly our source and target.
let me know you still require any doubt
Thanks
Sreeram
Message was edited by:
Sreeram Reddy

What are the versions required for JBOSS,JDK and ORACLE to setup the ATG 10.2.

Hi Folks,
Could you please share, What are the versions required for JBOSS, JDK and ORACLE to setup the ATG 10.2.
Thank you.

In case you don't have access to MOS :
JBOSS : 5.1.2 EAP
JDK : 1.6.0_38
ORACLE :
Oracle Exadata5
Oracle 10gR2 (10.2.0.3)
Oracle 10gR2 RAC (10.2.0.3)
Oracle 11gR2 (11.2.0.2.0)
Oracle 11gR2 RAC (11.2.0.2.0)

Which SP stack to install for EP 7 and BP XSS for ERP 2005

Hello,
I installed portal EP 7 and ERP 2005 both SR2
I also installed the XSS BP in the portal
Now I want to install sp-stacks but I have the following dilema
which sp-stack do I install
a) for ERP 2005
b) for the EP 7
c) for the XSS BP
Please, advise.
Kind regards,
Gil Halevy

Hi Gil,
This SAP Note provides information related to all the Patches., also some very useful Self services Notes guidance also.
[SAP NOTE 761266|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=761266&nlang=EN&smpsrv=https%3a%2f%2fwebsmp102%2esap-ag%2ede]
Hope this helps.
Reward points if helpful
Regards,
Shailesh Nagar

ERP 2005 and SAP ERP 6.0 are same

Hi friends,
First of all why i have asked ERP 2005 and SAP ERP 6.0 are same or not because i am creating a new system under transaction solution_manager in the solman system for the installation of the EHP4 packs.
The problem here is when i create a new system for SAP ERP, the product version that is displayed is SAP ERP 2005, my system doesn't show SAP ERP 6.0, will that make much difference.
IsSAPERP 2005 and SAP ERP 6.0 are same.
thanks.
anurop

> I am not getting the option SAP ERP 6.0 but i am getting only SAP ERP 2005 , is there any other way i can get SAP ERP 6.0 or can i leave it as it as SAP ERP 2005 and start downloading the EHP4 packs thorugh the Solution manager.
The given note contains a step-by-step configuration how to change that - including a PDF as attachment with screenshots.
You need at least SolMan SP17 to get EHP4.
Markus

Java Version for Unity Connection 7.1

Hi,
We have recently found that the latest Java Version 7 Update 11 when automatically updated on the users PC, the Unity Connection web page does not work when Media Master is used. The controls or menu does not respond.
Windows 7
IE 9.08112.16421
Java 7 Update 11
Does Unity Connection 7.1 only support Java 6 Update 33?
Will there be a patch from Cisco?
Thanks

Hi,
There is a known issue that Cisco Unity Connection requires Java Version 6 update 31 and
earlier to work with. For more information, refer to teh bugs below:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCto92753
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsw33324
The most stable version we have seen is the Java version 6 update 30 or 31.
Regards,
Tere.
If you find this post helpful, please rate!

I have installed 2010 microsoft office 2010 home and business version for my laptop,and i have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this que

I have installed 2010 Microsoft office 2010 home and business version for my laptop,and I have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this issue.
Regards
Raghavendar

Hi Raghavendar,
Generally, when you install Lync 2013 in the computer with Office 2010, a Lync Meeting Add-in will be installed and enabled in Outlook 2010. Please follow these steps to check it:
1. In Outlook, click the File tab, click Options, and then click
Add-Ins.
2. Please take one of the following actions:
If the add-in is in the Inactive Application Add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
COM Add-ins, and then click Go.
b. Click to select the check box next to the add-in, and then click OK.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should be available when you create a new calendar item.
If the add-in is in the Disabled Application add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
Disabled Items, and then click Go.
b. Select the add-in, and then click Enable.
c. Restart Outlook, and then verify that the add-in is displayed in the
Add-ins dialog box.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should now be available when you create a new calendar item.
3. In Event Viewer, view the Application log to see whether an error was logged for Outlook, for Lync 2013, the Lync Meeting Add-in for Microsoft Office 2013.
Thanks,
Winnie Liang
TechNet Community Support

HT201401 I got a 3G phone and recently I downloaded the new version for my phone and every since some of my songs that i downloaded thru itunes will not play in it's entirety

I have a IPHONE 3G and recently I downloaded the latest version for my phone and since some of my songs that I downloaded thru itunes will not play in it's entirety

I have a IPHONE 3G and recently I downloaded the latest version for my phone and since some of my songs that I downloaded thru itunes will not play in it's entirety

TS2753 i have removed iTunes and re-installed the latest version for Windows XP and still can't access the iTunes store; is there any way to get access to the iTunes store again?

I am unable to access the iTunes store for the last two months, I've tried removing the software and re-installing the latest version for Windows XP and still no access; is there a solution that would allow me to get access again?

If you haven't got a backup copy and if it's still in the store then you can try contacting iTunes support and see if they will grant you a re-download (there is no guarantee that they will) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Pro Tool Studio LE 7 upgrade... anyone knows where I can buy the upgrade version for this? and how much does it cost?

I have a Mac Pro 2006 running on leopard and I need to upgrade my Pro Tool Studio LE 7 to 8 so it can work on Leopard.. anyone knows where I can buy the upgrade version for this? and how much does it cost?

Upgrade to Pro Tools Studio LE 8: - http://shop.avid.com/store/product.do?product=288865113879120
But it would be worth searching through the Updates to see if there is an update for Leopard, which it looks like there is: - http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=355241

My iPod does not update it self in iTunes. I click on the "update the latest version for your iPod" and it fails. Please help me.

My iPod does not update it self in iTunes. I click on the "update the latest version for your iPod" and it fails. Please help me.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Which LKM and IKM to use for Fast data loading b/w MSSQL 2005 and Oracle 11

Hi,
Can anybody help us to decide which LKMs and IKMs are best for data loading between MSSQL and Oracle.
Staging Area is Oracle. We have to load around 400Million rows from MSSQL to Oracle 11g.
Best regards,
Muhammad

Thanks Ayush,
You are right and it has dumped the file very quickly; but it is giving error on sqlldr call thorugh jython. I have reaised SR with oracle to look into it further.
thanks again and have a very nice time.
Regards,
Muhammad

Size - Java Add-In (ERP 2005 ABAP)

ERP 2005 ABAP installed. Want to add the Java stack. (AIX/Oracle)
How much space/additional memory required (sandbox)?
My ABAP is 82gb, looked at note 851169; do I just need an additional 2700MB? Since I am 64bit; each Java server node 2gb...
Thanks!

Hi Kai,
The JAVA installation is really small so the numbers you are quotes are quite accurate for a base installation - you should double check with the SAP ERP master guide and it's referenced sizing note.
The real question is what do you want to do with it? If you are going to use the JAVA based applications of SAP ERP, you should size them like you would for other SAP ERP applications. Most of the SAP ERP applications that use JAVA do have store much data in the Java database but in the ABAP database so the java system is usually quite small.
I hope this helps,
Mike.

What is the correct Sun Java version for Plus ?

OK so I am running Version 1.4.2_06 (build 1.4.2_06-b03) for Disco Plus.. Is that the correct version ? I am trying to debug an error (Outstanding Refresh) and I need to eliminate the Java version being the cause:
Can anyone confirm ? thanks OBX
OracleBI Discoverer 10g (10.1.2.1)
Oracle Business Intelligence Discoverer Plus 10g (10.1.2.48.18)
Discoverer Model - 10.1.2.48.18
Discoverer Server - 10.1.2.48.18
End User Layer - 5.1.1.0.0.0
End User Layer Library - 10.1.2.48.18
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi

Hi OBX
Yes that is the correct version, at least that's the one that comes out of the box. You can upgrade to later versions but you have to do this both on the server and on the client. One thing that you must not do is allow the client machines to upgrade when the server is still on 1.4.2_06
I hope this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

SAP Latest Software Version for ERP

Guys,
I am out of touch with SAP terminologies from long and getting confused when searching forums. Can someone help me here?
I remember SAP ERP use to be, SAP 4.6c->SAP 4.7->SAP ECC5.0->SAP ECC6.0....which one is the latest? ECC6.0 or it is again called as r/3 now?
Thanks,
Z*
Moderator: It's a joke, isn't it?

Actually as long as this was posted in the coffee corner in the first place I don't think this question is a joke. SAP's Product Naming and Numbering scheme is a cruel joke played on customers.
Technically I think the latest version would be Business Suite 7 innovations 2010 with ERP being at EHP5. However that's my best guess as honestly I wish either the developers or marketing would final decide who gets to name products and stick with one group naming and numbering products.
My personal favorites was the whole (s) scheme for releases. Netweaver 2004s, CRM 2006s, etc. The going by development year of the product was probably easiest (ERP 2005, CRM 2007), but incremental numbers are probably the easier solution instead.
It would be great if SAP could resync all the release numbers for the business suite up to a common version. It's to bad that SAP can't come up with a Business Suite 8 that solves all the version numbers, unless that is being saved for a major overhaul and will unfortuantely probably run on Netweaver 10.
Take care,
Stephen

Java Version for ERP 2005 and Oracle 10.2.0.1

Similar Messages

Maybe you are looking for