Javascript not loading content after updating from firefox 26 to 27

on my site i have a page on which javascript pre-loads the content and then shows it.
this thing was working perfectly fine on firefox 26 but soon as i updated to firefox 27
the content doesn't show after loading
Like i have an image for 'loading content' which first appears and then the loaded content
shows up. This image is still showing in version 27 but the content which shows after is not showing at all.
I inspected the page and the divs and content is there but its just not visible somehow.
Please help me with this problem .. im stuck with this if it doesn't show up. Thanks.

this doesn't solve the problem.
actually its working on all other browsers, the content is showing.
but its not working on firefox 27. what problem could it be which is preventing version 27 from loading the content when its working just fine on version 26 (i just checked it on a different system with version 26).
also there was an instance when the same content wasn't loading on version 26 also but it was a problem due to some pinterest script. once i removed it everything became just fine i.e. content started loading (on version 26). Now, if that helps in deducing the problem please help me out.

Similar Messages

Problem loading pages after update to Firefox 36

After updating from Firefox 35.0.1 to version 36, I am unable to load any pages in Firefox. (My internet connection is fine and I can use other browsers on the same computer.)
I've already tried many troubleshooting routines to fix the problem but none have worked. I've tried the instructions here:
https://support.mozilla.org/en-US/kb/fix-problems-connecting-websites-after-updating
(including troubleshooting my Firewall and proxy settings)
and here:
https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can
I've also tried the more general and extensive troubleshooting here:
https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems
NONE of the suggestions in any of those pages solved the problem. Opening Firefox is Safe Mode did not help either. I was unable to load pages even in Safe Mode.
After following all of the steps in all of those troubleshooting guides and still failing, I uninstalled Firefox completely. (I followed all official directions on how to uninstall.) Then I re-installed Firefox VERSION 35.0.1. Firefox again worked fine with the older version.
Then I restored my profile from a backup using MozBackup. (My most recent backup was done when I had Ver. 35.0.1 installed.) Everything was still fine; Firefox worked fine and all of my settings were back to my preferences.
Finally, I again tried to update to version 36 - and the same thing happened! Unable to load any pages!
One other thing I've noticed: With version 36 installed, there is something wrong with my Options dialog. The first time I upgraded, I had only blank tabs for "General" and "Advanced"; with my second try, after updating to V 36 my Options dialog has blank tabs for "General" and "Search" (although Advanced is now showing.)
I am going to uninstall again, and again go back to V 35.0.1. But I would like to be able to update to the newest version. What can I do?
(I am a long-time Firefox user, and reasonably computer savvy. I have many extensions installed as I use Firefox as an important tool in my job as a website designer. I have Firefox extensively fine-tuned to my liking to optimize my work-flow.)
Any help appreciated!

Your message seems to have covered all the normal things we check.
When you tried using v36, did you have any add-ons? Have you tried;
'''https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles'''
'''Windows: 32-bit''' C:\Program Files\Mozilla Firefox\firefox.exe -p
'''64-bit''' C:\Program Files (x86)\Mozilla Firefox\firefox.exe -p
'''Mac:''' Navigate to '''/Applications/Utilities.''' Open the Terminal application.
In the Terminal application, enter the following:
/Applications/Firefox.app/Contents/MacOS/firefox-bin -p
'''Linux:''' In '''Terminal''' run: firefox –P
For users who have one or more builds from mozilla.org this will not work.
It would be best to have the full path so if you had placed the untared contents
in a folder in /home it would be /home/<username>/foldername/firefox/firefox –P
An easy way would be not to do it in a terminal but in say a launcher since
you have to point it to the firefox script in Firefox folder you can then add –P
on end. You can also have the exact "profilename" after the -P so Firefox
will start with that Profile.

Can't pause flash with right mouse click on mac osx 10.6 after update from firefox 3 to 6

After updating my firefox 3... to firefox 6 I can no longer right click in a flash video and pause it

My camera is a 1Ds mk II..
and for that one it says
All versions tested. All versions tested. Supported only through Lightroom 4.1.
however, it also says
Windows XP, Vista, 7; Mac OS X 10.5 or 10.6
which is plain wrong, because Canon never supported any drivers for Windows Vista or Win 7, not to speak of XP 64bit. (You cannot connect the camera via firewire, without the device drivers!)

Firefox Not Loading Websites After Update

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1053378 /questions/1053378]''
Firefox has stopped working after latest update. I can open it up but then it wont load any websites. It just keeps loading. After if I close it and try to re-open it I get the following error message: "Firefox is already running, but not responding. The old firefox process must be closed to open a new window" and it never opens. If I try to end the process in task manager I can't as it doesn't do anything when I attempt to end the process. Then the only way I can get back on firefox is to restart my computer. This is happening on both my PC and my Laptop both running Norton Security Suite.
Please HELP! as I have tried everything and nothing fixes it. I have tried the following troubleshoot solutions with no luck:
1) Reinstall Firefox
2) Refresh Firefox
3) Removing Firefox from the list of accepted programs in firewall and then adding it back (this was done through Norton as it is managing my Windows Firewall)
4) Creating a new profile and using that one instead
5) Starting Firefox in Safe Mode
6) Updating firefox
7) Updating Norton
Nothing seems to be Working and I'm starting to get frustrated. Any Help is appreciated. Thanks

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/

Social App not working even after update from noki...

nokia n8 social loading feeds.
My wife and i have the same problem now, only last week she said my phone will not work on facebook the widget on main home screen will not load feeds at all, and the widget is now blank saying refresh all the time, so i linked the phone up to the computer and did a scan for new updates with nokia updater which you can download from nokia site.
Its now the 4th jan and the phones still will not work even after and update from a socail app,
nothing , facebook will load after a few pushes, and looks like its loading till it says loading feeds then it says the (wording unable to load news feeds)

Uninstall the social app and reboot your phone. Then go to software updates and reinstall from the offering given in the updates. I've uninstalled and reinstalled social twice and it has worked both times.
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

Why can't 4.01 connect after updating from Firefox 4? I must use a system restore to get back online with Firefox 4, using Vista Home Basic SP2.

Firefox is my default browser. Recently I updated from 3.5 to 4.0 with no problem. Then, using 4.0, the new update notice appeared. I clicked to update to 4.01, but after downloading, 4.01 could no longer connect to any web page, and displayed the error connecting message (including "server may be busy, wait and try again" etc.). It never did connect. Yet Internet Explorer was able to, which I loathe to use even as a back up browser. I also checked to see if IE9 had stolen the default browser association, but it hadn't. I was hoping I could blame Microsoft's shenanigans, oh well!
I then did a system restore from a point a few days prior, and 4.0 was up and running like before.
Twice thereafter, I tried to update again manually, using Help/About Firefox/Check for Updates. The same thing happened.
I'm content for now to stick with 4.0. FYI & FWIW, I tried to provide this feedback to Mozilla at another page, and was told I must have "the latest version" in order to submit feedback. I'm glad I found this way of letting you know of this repeated problem.

'''''<u>Users are overusing and misusing System Restore!</u>'''''
System Restore:
#is a way of protecting the '''''Windows environment'''''
#'''''may help to avoid a complete reinstall of the Windows Operating System'''''.
# should '''''never be used in place of un-installing an application and trying to replace it with an earlier version of that same application'''''
#'''''should generally be the LAST step in diagnosing/reversing a problem with the operation of Windows, BEFORE performing a complete reinstall of the Windows Operating System'''''
See this and related articles on the Microsoft site: http://support.microsoft.com/kb/959063

After updating from Firefox 3.6.24 to 8.01 I could no longer access my Hotmail e-mail in My.MSN web page. I believe Firefox 8.01 doesn't support this capabilityl. If this is not true, how do I fix this problem?

After installing 8.01, I logged into My.MSN.com web page and my e-mail messages no longer dropped down into my Hotmail menu. I believe Firefox said 8.01 no longer supports this capability. I therefore did a system restore to go back to 3.6.24.
How can I view my Hotmail e-mail messages in my.msn.com if I upgrade to 8.01?

I also have this problem and it just started in the last week or so. It seems to be dependent on my home network and the problem only exists with firefox. I have used chrome and IE8 with no issues. I can verify tomorrow that it only exists in my network but one thing I was able to test is that the problem exists even on my linux boot. I am totally dumbfounded with this problem and I can't find anything that will allow the gmail page to load. All other pages I have tried load fine, all be it a little slower than normal but they load. If anyone knows of a difference between firefox and all other browsers on how it goes through the router I would appreciate the info cause I don't know of any differences.

The Firefox What's New screen will not go away after updating to Firefox 10.0.

I updated Firefox to 10.0 on my Acer Laptop. Now every time I open Firefox the What's new page loads along with my chosen homepage in another tab. I can not stop the What's new page from loading.
No problem on my desktop, the What's new page loaded once then disappeared after that as it normally does.

See these articles for some suggestions:
*https://support.mozilla.org/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
*https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*http://kb.mozillazine.org/Preferences_not_saved

Does not load pictures after updating with latest version

I have windows 7 and just updated the latest version of firefox. Since I did this, none of the pictures load in my email.

See:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"

IGoogle home page not loading correctly after update to 10.0.1. Help please!

I use iGoogle as my home page. Since the update, the page displays minimal information, no gadgets or widgets, the theme heading or anything. Just the Google search box and some basic links. Howeer, if I click on Google Classic, that page displays correctly.
What's going on?

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
Check and tell if its working.
May not be related to your problem but some of your Firefox Plugins are out-dated
* Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

Time Machine will not back up after updating from 10.2 to 10.3

This just started yesterday so it has to be due to the update.
The following error message is given in the Time Machine settings:
The backup disk needs 257.55 GB for the backup but only 234.84 GB are available. Select a larger backup disk or make the backup smaller by excluding files.
250 free gigs on my backup disk but it can't make the backup? What? I currently have 900GB filled on my regular hard drive but I don't back up all of it. I exclude about 150GB from backup, so the machine estimates the total backup size to be 759GB. The backup drive already has 764GB filled, so I'm not sure where all this extra info is coming from. Haven't downloaded anything besides the new update.
Any ideas on what to do?

This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
tmutil compare | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take several minutes to run. Wait for a new line ending in a dollar sign ($) to appear below what you entered.
A TextEdit window will open with the output of the command. Don't post all the output; just read it yourself. Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
Files that you’ve excluded from backup, or that are excluded automatically, are ignored.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.
Caution: Under some conditions, tmutil may falsely flag files as not having been backed up when in fact they have been. It can be confused by multi-linked files, or by files with a modification date earlier than the one in the snapshot. This will not be an issue for most users. If the results of the above procedure surprise you, inspect your snapshots directly.

Jquery content not working after the updates from firefox

Hi, i've realized that some of my website's banner is not working after the recent updates from firefox, whereas those website's banner is working in google chrome.
Hope there is a solution for this as i'm using the firefox for years and wish this issues can be settle.
The banner URL is http://www.irs.com.my/slider/index.html

SlideDeck has a post on how to resolve this error, caused by a bug in this very old version of their library that you're using. See: [http://www.slidedeck.com/blog/firefox-20-update-and-slidedeck-js-weve-got-you-covered/ Firefox 20 update and SlideDeck.js – we’ve got you covered] for more information. As a Pro customer, you were supposed to get an email notice, but... here you are.
I studied the script before discovering that and found two issues, but there might be more:
(1) slidedeck.jquery.js detects Firefox 20 as Firefox 2 and halts. Note that this regex is the problem:
firefox2:F.match(/firefox\/2/)?true:false
(2) Starting in Firefox 16, the -moz-transform property was unprefixed, that is, you need to use transform for Firefox 16 and later.

Win 8.1 will not load after update from 8.0

I have a M6-K010dx with win 8. Was fine for 2 years untill updated win 8.1. Now can not access nor recover or re-install win 8. Was purchased at Best Buy but was not given any software or keys. No keys on bottom. When trying to re-install system it says partistion is not there for use. I have tried to call Best Buy and they say I must buy new software and recovery disks. I have tried to boot from USB but will not do it. Have changed in bios for boot order. I do not have a USB DVD but cnan probably get one. If I DL ISO I will not have key to use.
It would appear that as the screen flashes on and off that it may be a video driver problem but have no way of fixing if it is. Do not think I should have to buy new software as I paid for it at purchase and not sure if I did I could install from USB. Because of the lack of rercover partition not there I would think I was sold a defective system.
Any help appreciated.

Hi @guaranteed ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your Windows 8.1 not loading correctly after an update. Windows 8.1 is just an update and would not remove your partition.
You can reinstall Windows 8 with any Windows 8 disk as long as it is the same version as yours. Windows 8 Home or Windows 8 Professional. It will install and update with no issues.
You might want to look at this document on some different options.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

After updating to firefox 8.0, can not send gifts or requests from farmville or cityville on facebook.

after updating to firefox 8.0, can not send gifts or requests from farmville or cityville on facebook. (When I hit the send button I get an empty window titled "about:blank", which disappears and nothing gets sent. It works under internet explorer but not under firefox 8.0

Old Toad wrote:
I got that message with all of my libraries. Do see if the galleries are still on your iDisk mount your iDisk and go to the iDisk/Web/Sites folder and look for a folder titled "_gallery". Inside of it should be folders for each of your galleries. The folders are titled with 6 digit numbers which makes it difficult to know which folder is for which gallery.
Thanks. "_gallery" is empty
Have you tried re-syncing as Larry suggested?
I'm sure it will work, but I'm perplexed as to how this could happen.
Do you find that iPhoto now launches faster? Perhaps it's because my web galleries are gone?

Firefox not starting after updating from v24 to v32 on centos 6.5

I have updated my firefox from version 24 to version 32 recently released for Centos 6.5 in the official packs, but after updating now firefox is not at all starting.
Even the first screen where it checks for add-ons dependency is also not coming up, what I can see is just firefox starts and crashes within seconds without showing any screen.

I have successfully resolved this issue on my PC by allowing updater.exe through the firewall. This updater.exe is located in the folder where your Mozilla Firefox was installed. The default folder is "C:\Program Files\Mozilla Firefox\updater.exe"
Happy Browsing.....

Javascript not loading content after updating from firefox 26 to 27

Similar Messages

Maybe you are looking for