JBoss Application server setup with netbeans IDE.
Hi All,
I need to configure the JBoss Application server with netbeans IDE. I have tried this scenario,
1) Unzip the jboss-4.2.2.GA.zip into jboss dir.
2) Selected the JBoss Application server 4.
3) And i have set the Installation location like this j:/jboss/jboss-4.2.2.GA. In this i got some problem.
The problem is: Next button did not selected.
Error: provide valid installation dir path.
How to resolve this problem? Can anyone give suggestions for resolving this error?
Its very urgent!!
A couple of things:
1. if you are using SJSAS 9.0 it's Glassfish v1 (not v2 - that's probably for the 9.1 version? I don't know, I'm running 9.0 and installs fine with Gf v1 - thanks for the tip, btw!)
2. as for the domain, just pick the default offered (unless you have some specific requirement) - in any event, it's under the domains/domain1 folder
you can always create a new one and register (it will have its very own folder under /domains) but given that's probably a dev box, I can hardly see the point (and when I did it a long time ago, it was more pain that any human being should be subjected to :-)
Finally, one cannot but wonder why on earth someone (at Sun) developed NB and put Sun Java Application Server (developed at Sun) as one of the options that won't work with SJAS 9.0+ (developed at Sun) but one has to instead choose Glassfish (developed at Sun) and that won't work if one chooses v2 instead of v1 if it's SJAS 9.0 instead of 9.1 (or vice versa)...
Don't these guys test the thingy with THEIR own stuff?
Don't get me wrong, I totally love Sun, and all the good stuff they come up with (NB, SJAS, etc. etc.) but done it properly it would help them to gain market share, now, wouldn't it?
Similar Messages
-
Regarding Sun Java System Application Server Issue with JVM
Regarding Sun Java System Application Server Issue with JVM
Hi
I have installed SJSAS9.1 on solaris system. I m trying to deploy war file which i compiled in windows enviorment by jdk1.5.0_05. Every time i got the following error :
type Exception report
message
descriptionThe server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: PWC6033: Unable to compile class for JSP
PWC6199: Generated servlet error:
[javac] javac: invalid target release: 1.5
[javac] Usage: javac
[javac] where possible options include:
[javac] -g Generate all debugging info
[javac] -g:none Generate no debugging info
[javac] -g:{lines,vars,source} Generate only some debugging info
[javac] -nowarn Generate no warnings
[javac] -verbose Output messages about what the compiler is doing
[javac] -deprecation Output source locations where deprecated APIs are used
[javac] -classpath Specify where to find user class files
[javac] -sourcepath Specify where to find input source files
[javac] -bootclasspath Override location of bootstrap class files
[javac] -extdirs Override location of installed extensions
[javac] -d Specify where to place generated class files
[javac] -encoding Specify character encoding used by source files
[javac] -source Provide source compatibility with specified release
[javac] -target Generate class files for specific VM version
[javac] -help Print a synopsis of standard options
note The full stack traces of the exception and its root causes are available in the Sun Java System Application Server 9.1 logs.
I have cheked jvm version on both system the only difference is :
Solaris points to jdk 1.5.0_09
Windows point to jdk1.5.0_05
Even i tried to run blank jsp also but again i got the same error.
Can any help me to sort out the problem or give me any idea so i can do something by my own.
Thanks in Advance
GaganDo you have ANT installed and available?
Thanks,
Kedar -
Java 1.4.2 with NetBeans IDE 3.5 - Error Message, please help
Hello, I have downloaded the "J2SE v 1.4.2 with NetBeans IDE v 3.5 Cobundle" for windows.
I ran the install, everything went fine, but when the install finished it said there was an error and to please refer to the log file.
Here is what the log file says:
"Installing J2SDK..."
"Finished Installing J2SDK..."
(Jul 1, 2003 7:53:14 AM), Setup.product.install, com.sun.installer.InstallJ2sdkAction, err, Error occured while installing [0] -> D:\Program Files\j2sdk_nb\_uninst\custom-install.bat "D:\Program Files\j2sdk_nb\install.log" "D:\Program Files\j2sdk_nb\j2sdk1.4.2\" D: "D:\Program Files\j2sdk_nb\_uninst"
Now when I try to run "NetBeans IDE 3.5" I get an error message:
Cannont load jvm.dll
Does anyone know how to resolve this, I have tried uninstalling and re-installing and I get the same problem.
Thanks,
-MikeHello, I have downloaded the "J2SE v 1.4.2 with
NetBeans IDE v 3.5 Cobundle" for windows.
I ran the install, everything went fine, but when the
install finished it said there was an error and to
please refer to the log file.
Does anyone know how to resolve this, I have tried
uninstalling and re-installing and I get the same
problem.
Thanks,
-MikeHi Mike,
Even I got a similar error message inspite of trying to re-install atleast 10 times! So I gave up and did this:
1) I downloded J2SE SDK 1.4.2 seperately.
2) I then downloded JPad Pro IDE (latest version).
Now both are working really fine for me. :-) Could'nt be bothered to try again and again.
Its up to you if you want to get the NetBeans installation done but all I wanted was a good IDE and the latest version of the JDK. I have been using it for the last 3 days and it is working perfectly fine!
Regards :-)
Vijay -
Deploy XI java Proxy inside JBoss application server
Hello,
Can I deploy XI java Proxy inside JBoss application server
Appreciate you response.
ThanksHi,
<b>Yes</b>
You can deploy your Java Proxy inside JBoss Server (in any Application server). But this will be possible only for Client Java Proxy and not for Server Java Proxy.
I have succesfully completed those scenarios.
After generating Client Java proxy, create EJB application with generated Java classes for proxies and deploy it in JBoss.
Then you can access that EJB to pass inputs either in standalone application or some JSP.
Regards,
Uma -
Adding JBoss Application Server for Monitoring
How do you add a JBoss Application Server for monitoring? Is there a way to add it silently like silent install of the host target?
It is a manual process, you need to launch Jboss discover UI using Targets > Middlware page.
Also, please use JVMD for more detailed analysis.
You need to specify JARs based on the version of the JBoss -
Note - Please check the support site for exact certified versions of JBoss.
JBoss 4:
dom4j.jar jboss-management.jar jnp-client.jar
jbossall-client.jar jboss-client.jar
JBoss 5:
concurrent.jar jboss-javaee.jar jboss-serialization.jar
dom4j.jar jboss-jsr77-client.jar jbosssx-as-client.jar
jbossall-client.jar jboss-logging-spi.jar jbosssx-client.jar
jboss-client.jar jboss-management.jar jnp-client.jar
jboss-common-core.jar jboss-remoting.jar jboss-integration.jar jboss-security-spi.jar
JBoss 6:
concurrent.jar jboss-management.jar
dom4j.jar jboss-remoting.jar
jbossall-client.jar jboss-security-spi.jar
jboss-client.jar jboss-serialization.jar
jboss-common-core.jar jbosssx-as-client.jar
jboss-ejb-api_3.1_spec.jar jbosssx-client.jar
jboss-integration.jar jboss-transaction-api_1.1_spec.jar
jboss-jsr77-client.jar jnp-client.jar
jboss-logging.jar
If you plan to use JVMD then you should select Remote Agent for discovery/monitoring.
JNDI service should be configured and Naming Service port should be open.
Agent should be able to communicate with the host and JNDI port.
Above list of JARs to be copied on the agent machine (location provided as library path during discovery)
Could you please share customer details and usecases. -
Example for Tagging API using EJB3.0 on Jboss Application Server
Hello Friends
In EJB 3.0 development I am searching for Taging API implementation using JBOSS application server and Netbeans 5.
If anyone has tutorial to do so please post the link.
Thanks in advance.
Ravi PhulariHello Friends
In EJB 3.0 development I am searching for Taging API implementation using JBOSS application server and Netbeans 5.
If anyone has tutorial to do so please post the link.
Thanks in advance.
Ravi Phulari -
Oracle Application Server 10g with 11g Database
Hi everyone,
If anyone can tell, is there any compatibility issues in Oracle Application Server 10g with 11g Database?
Will it work properly?
Thankshi,
This will be helpful,
http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#CHDBFJFD
which states
"All available editions of Oracle Database 11g (11.1.0.6) or higher are supported. Please refer to Metalink note 740417.1 for details on Oracle Database 11gR1 Certification for Oracle Application Server 10g (10.1.2.x) and Metalink note 887365.1 for details on Oracle Database 11gR2 Certification for Oracle Application Server 10g (10.1.2.x) "
Regards
Fabian -
Install both Sun Application server and Jboss application server- Can I?
Dear all,
I am programmer and want to test for something.
Is it possible to install sun application server and jboss application server in the same computer (Windows XP Professional)?
Is there any special attention I need to take?I am programmer and want to test for something.Allowed.
Is it possible to install sun application server and jboss application server in the same computer (Windows XP Professional)?Why do you think it may not be possible ?
Is there any special attention I need to take?just the way the URL is populated. -
Jboss application server upgrade
Hi All,
As per our requirement we are planning to migrate web application from jboss application server 4.0.1.GA to Jboss 7.0.1 GA.
I am new to the Jboss application server . Can you please tell me the advantages of using jboss AS.
and what is the difference between 4 and 7.
If we are going to upgrade the server, what are things we need concentrate it ? ( like logging ,jndi etc).
Please share your valuable points .Hi All,
As per our requirement we are planning to migrate web application from jboss application server 4.0.1.GA to Jboss 7.0.1 GA.
I am new to the Jboss application server . Can you please tell me the advantages of using jboss AS.
and what is the difference between 4 and 7.
If we are going to upgrade the server, what are things we need concentrate it ? ( like logging ,jndi etc).
Please share your valuable points . -
Problem with Netbeans IDE 5.0: Building Gui
Hello,
I have the following problem with Netbeans IDE 5.0 (I made the same with netbeans 3.6 and it works properly):
Step 1) Create a myJPanel class (new JPanel Form)
Step 2) make a simple operation on myJPanel such as adding a JTable.
Step 3) Create a myJForm Class (new JFrame Form)
Step 4) Adding a JPanel to myJFrame (default name jPanel1)
Step 5) Select JPanle1 within myJFrame and go to code-> custom creation code and write "new myJPanel();"
this should set the jPanel1 (and all its contents and behaviours) created
in step 4 equals to myJPanel();
Step 6) run myJFrame;
........ and nothing happens. It is dispalyed just a gray JFrame.
It seems that myJFrame is able to istantiate myJPanel() but is not able to paint it. what's wrong?
Hope you may help me,
thxUnfortunately, Netbeans 3.6 files and Netbeans 5 files are not compatible. Except the Java source files, Netbeans uses other aditional files such as xml files etc for forming GUI and other reasons. I have also faced the same problem with you. Good luck.
-
Have any body used Jrockit with Netbeans Ide.
I was trying to use netbeans 6.8 after installing it using ---javahome to Jrockit home
But was not able to make any project due error " not found JDK"
Have any Idea . plz helpI have modified the netbeans.conf file as discussed:
#netbeans_jdkhome="C:\Program Files\Java\jdk1.6.0_20"
netbeans_jdkhome="C:\Program Files\JRockit Real Time\jrrt-4.0.0-1.6.0"
When I go to Help->About this is what I see:
Product Version: NetBeans IDE 6.8 (Build 200912041610)
Java: 1.6.0_20; Java HotSpot(TM) Client VM 16.3-b01
System: Windows XP version 5.1 running on x86; Cp1252; en_US (nb)
Userdir: C:\Documents and Settings\smitj01\.netbeans\6.8
NetBeans is not running JRockit? -
Is ITS application server compatible with VMware
Hi SAP Gurus,
Please let us know if ITS application server compatible with VMware
Thanks
RajeshYes... i have use it in the past without problems..
regards
Juan -
BPEL Server installation on JBOSS application Server on SUN SOLARIS
I have a question about Oracle BPEL installation. For our project exists the requirement, to install BPEL Server on SUN SOLARIS, whereby the appropriate Version of Application server JBOSS already exists and it should be used.
The version of the Oracle BPEL server for JBOSS, which we found on the Download side, is made available only with JBOSS (version 3.2.6) in a Package.
During the BPEL server installation this bound JBOSS server version is installed automatically, without giving selection. Is there a BPEL installation for JBOSS on SUN-SOLARIS, which can be installed at the already existing JBOSS server?Hi There,
Dis you get any good responces to your question ?
Thanks
[email protected] -
Help add Sun Application Server 7 on netbean 5.5
First I setup netbean 5.5 on winxp and then i add Sun Appliction Server 7 on netbean but I can't reg my domain at (C:\Sun\AppServer7\Domains\Domain1).I get my error in output of netbean:
--domaindir : Option does not have an exact match
Usage: create-domain [--path domain_path] [--sysuser sys_user] [--passwordfile file_name] adminport port_number adminuser admin --adminpassword password domain_nameso either ask Netbeans support, or go to
Developers Forum -> Whatever -> Sun One Application Server
and ask there. -
Use of JCo in JBoss Application Server
Hi All
does anyone know if the SAP JCo drivers are supported in other Application Servers (e.g. JBoss 6) ?
Thanks a lot in advanceThe short answer is yes.
The longer answer:
As I am aware of, SAP does not guarantee that they work in application servers other than SAP WebAS per se, but I know that they work at least in Tomcat and Websphere. JCo does not include dependencies on the application server architecture and can also run locally with a Java application on your machine.
As JCo involves native code, there is a limitation on what Java/OS platform it is supported. For the current JCo 3.0, you may refer to SAP Note 1077727 for compatibility with your Java version and Operating System platform you run with JBoss.
Edited by: Christian Wunderlich on Jul 14, 2011 6:42 PM [minor spelling fixes]
Maybe you are looking for
-
Real time apply for logical standby
Hi Oracle 11.2.0.3.0 I have a primary database orcl and logical standby database orcl_std. Real time apply is enabled. I have standby redologs in both primary and standby sides and I`ve started recovery with below command: ALTER DATABASE START LOGICA
-
IPOD NANO 3rd GEN How to watch Video
well i loaded some videos in my new ipod nano but when i press press it says load tv out thing help me here do i have to buy a item to watch videos =="
-
Hi All, When i create a ARE 3 document, finally i click the check button the log is displayed " Enter the license number ". What is the procedure to get the license number for that. Please help me to create the ARE 3. Thanks, Suresh
-
I I have a 1 TG external drive that is formatted to Windows NTFS and is read only, how do i get it to read and write on my Mac OS X 10.6.3?
-
MacBook Pro 17" Crashing - ATI Monitor suspected to blame.
Hi! Over the past few months, my MacBook Pro 17" has been crashing. Usually, it's when I'm playing a game such as World of Warcraft: the screen freezes, but I can still move my mouse and often music still continues to pay (however, sometimes music re