JCO destination created but NOT showing up in SLD.

We have a portal with a centralized SLD which is tested successfully.
We created a JCO destination on the portal successfully.
However,
1) we cannot test the new jco , all buttons are disabled except the "create" button;
2) if we click above "create" button, we end up with "Jco already exist, cannot create";
3) we go to the centralized SLD, see no jco destination there for this portal.
Very strange. Please help. Thanks!

Which user id are you using to login? Please check the authorization of the user.

Similar Messages

  • PR created but not showing in CJI5

    Dear Experts,
    I created PR with account assignment P with WBs element but this  information is not showing in CJI5 Commitments, When I create PO this updating in CJI5.
    In CJI5 - I selected all check box of PR+PO+others, still no data exists for PR.
    Please Suggest
    Thanks,

    Hi Pavan,
    Please check the following
    1. check if the number ranges are maintained properly for PR.
    2. Check the G/L used in creating PR and PO. Is the G/L same or different? If different in PR then check the cost element category of this G/L.
    3.Check the layout selected in CJI5. Choose the standard one and execute the report.
    4. Check if the SAP Note 95510,955107 are implemented there.
    Regards
    Saurabh

  • PO created but Status showing as Awaiting for approval in extended classic

    Hi Experts,
    SRM 5.0 extended classic scenario,SC approved and PO created but status showing in follow on documents node in SC as awiting for approval.
    Can any help in finding solution.Thanks in advance.
    Thanks,
    Babu

    Hi Babu,
    I am facing the same issue in the ECS SRM 5.0 after approving the shopping cart the PO created in EBP but the WF status is waiting and PO is not transmitted to R/3. Below is the status of SC and PO in BB_PD. Kindly suggest what could  be the problem where i can analyze.
    SC
                        Status         Description                    Inactiv
    HEADER     I1015          Awaiting Approval              X
    HEADER     I1021          Created
    HEADER     I1038          Complete
    HEADER     I1106          Shopping cart ordered
    HEADER     I1129          Approved
    0000000001 I1111          Item in Transfer Process       X
    0000000001 I1113          Follow-on Document Created
    0000000002 I1111          Item in Transfer Process       X
    0000000002 I1113          Follow-on Document Created
    PO
    Stats:
               Status         Description                    Inactiv
    HEADER     I1015          Awaiting Approval
    HEADER     I1021          Created
    HEADER     I1038          Complete
    HEADER     I1180          Document Completed
    Thanks,
    Kannan B

  • My usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

    my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

    Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
    Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive.

  • Device Show in My Computer But Not Show in itunes

    My iPod Shuffle Disconnect During The Restore Process And Now Device Show in My Computer But Not Show in itunes.Please Help Me.to Solve This problem>

    Does it say that it works with iOS devices (iPhone, iPod touch or iPhone)? iOS devices have a different format/file system than other iPods.

  • Photo Uploaded in AD but not showing/visible in Lync 2010 client

    Photo Uploaded in AD but not showing/visible in Lync 2010 client
    bala

    Hi,
    Please also double check the size of the photograph in AD, make sure the size not overtake 48 pixels by 48 pixels, as it has a serious limitation on the size and resolution of the photos: the thumbnailPhoto attribute can only hold a photograph with
    a maximum size of 48 pixels by 48 pixels.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • In downloading my Events from iPhoto on my Mac to my iPad Air, the Events arrive in the proper order but not showing the Key Photo.  At the same time, the Events arrive in iPhoto on the iPad in totally random order but showing the Key Photo.Why?

    In downloading my Events from iPhoto on my Mac to my Ipad Air, the Events arrive in Photos in the correct order but not showing the Key photo. At the same time, the Events arrive in iPhoto in a totally random order but with the Key phto showing. Why? of course and is there a way to shift the order in Iphoto and get a Key photo in Photos?

    HHi, thank you for the reply. I have checked my iPad and iPhone and neither has iCloud Photo Library (Beta) enabled. Turned off in both. Photostream is turned on.
    i tried to sort it out  by dragging all the photos to Events on the Mac and then deleting them from iCloud - (left hand side of iPhoto under the section 'Shared'). the photos now show up in Events. I did force quit but the issue remains. The message reads ' photos are bing imported to the library. Please wait for import to complete.'
    i can't empty iPhoto trash either. The message read "Delete error. Please wait for import to complete.'
    WHen I was moving the photos to the Events I always had a message about duplicates - to the effect that the photos already existed, did I want to import them? I clicked on Yes, import all duplicates. But when it showed the images - duplicates side by side - one showed the photo and the other was blank.
    I really don't know what to do! And I don't know how to handle my iOS devices. Is it to do with the large number of photos? Any help, advice appreciated.

  • Playing movie on tv; playing but not showing up; what output, DVD?

    1st time trying to play movie on tv; playing but not showing up; do I need to change output?  Only DVD & DVR shown. Thx

    You need to provide more information. How are you connecting your iPad to the TV. Are you using an Apple TV 2, a component AV cable, a composite AV cable or the digital AV cable?

  • How to remove 1797 emails. stuck in inbox.  but not showing anymore - and i have the same problem wit the sent.  please help

    how to remove 1797 emails. stuck in inbox.  but not showing anymore - and i have the same problem wit the sent.  please help

    This is a user supported frum, so making threats really doesn't help, besides which it's not like any of us can really make a dent in Toshiba's bottom line despite how many people we think we can influence. Unless those people were standing in line to buy a Toshiba product cash in hand, and you pulled them out, it really doesn't add up for them.
    At this point it would probably be better for you to use the 800 number. Have all your e-mails ready to forward, if needed, to whoever you end up talking to. Don;t let them off the hook. An hour on the phone is much better than weeks passing e-mails through a support site. Also contest the charge with your bank or credit card.

  • My iPhone 4, bluetooth turn on in settings but not showing on home screen

    My iphone 4,bluetooth turned on in settings but not showing on home screen

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

  • Push button ijn appraisal showing in backend but not showing inn portal

    Hi Expert,
    I would like to ask that push button in appraisal while configuring ESS/MSS package.
    It is showing in backend, but not showing in portal.
    Request you to give your inputs to bring push button on to the portal.

    Hi,
    are you using the same user to access backend and portal?. In backend, did you try from transaction PHAP_CHANGE with that user?. If you try with transaction PHAP_ADMIN in backed you are accessing as administrator, so you cannot compare the behaviour in PHAP_ADMIN and portal.
    Regards,
    Ana

  • Apps showing in library but not showing up in devices i pod- sync apps list. ...pls help

    apps showing in library but not showing up in devices i pod- sync apps list. ...pls help
    id: [email protected]

    Are the apps checked to be synced to the iPod and did you click on the sync button in Tunes?
    Were the apps purchased fro the same accoubnt signed into in the iPod?
    Are the apps compatible witht he iPOd model and iOS version?
    Do you have restrictions set that prohibit instaling apps?

  • Data source was activated and replicated but not showing up in RSA7.

    Hello,
    Data source was activated and replicated but not showing up in RSA7.  At what point does the data source appear in the Delta Queue?
    Thanks

    Hi,
    for LO,LIS,generic,FI data sources, delta records come from delta queue.
    if u run the INIT in BW whether it may be success or not delta queue will be maintained in RSA7. and u can check the records in RSA7 or smq2.
    when the init request goes to R/3 then it will maintains delta queue in RSA7.
    assign points if it helps,
    thanks,
    pavan.

  • HT1539 Digital copy transferred successfully to my computer, but not showing up in purchased list on other devices.

    Digital copy transferred successfully to my computer, but not showing up in purchased list on other devices. This is the first time I've encountered this issue. Package insert says copy is iPad compatible. Is there anything I can do to fix this? (The movie was Kung Fu Panda)

    it's a known issue. Everyone is experiencing this issue. Give it time for Apple to rectify the issue.

  • Form created but not visible!!

    Form created but not visible!!
    Hi everyBody,
    I've created 2 user Forms binded with a 2 user tables (with diffrent UDOs)  and  everything works perfectly. When I tried to run it on a machine at a customer, the first form functions perfectly and the second one is created but does not appear!!!,
    I am lost!!
    Is there a problem of SQL  Server 2005?!
    Is it because of the nature of the machine (server or client machine)?
    Is there a problem of configuration (Operating System)?  I'm using Windows XP but the other machine is using Windows 2000.
    would somebody have an idea or suggestion?
    Thank you in advance

    HI Haifa,
    When the second form opens (but doesn't appear on screen) choose Windows--Cascade from the top menu. Sometimes a form will open outside the viewable area in the SBO client so choosing this menu option will reset it.
    Kind Regards,
    Owen

Maybe you are looking for

  • Keyboard language changed only in Firefox not other programmes

    I have Firefox in English but I use a Spanish keyboard, meaning some keys like question marks or quotation marks are in different places, there are accents, a key for ç, etc. It has always worked normally but today, while the keyboard is working corr

  • Imported playlists but itunes doesn't see songs

    I have dutifuly exported playlists both by right click playlist/export playlists and by file/export as xml and neither of those formats imported see any of the music. I have to find them all manually now. Any thoughts?

  • OS Performance

    Dear All, On different websites there are different statistics. What is your personal experience to run Oracle 11gR2 RAC, Red Hat Enterprise Linux 5 is better or Oracle Enterprise Linux is better. What are the advantages of using Oracle Enterprise Li

  • Close session in ABAP Program Control

    Hi all, To avoid the users can run some transactions during the batch window, we have developed an ABAP program to lock these transactions before the start of batch period in background mode. After batch window we unlock it. The problem is that the u

  • "Starting Window Login" PLEASE help

    I have a blue G3 running Panther. I've had it for about two years (bought it from a friend, so I have no disks) and a couple of months ago I tried to start it up. However, it stops loading right before the login screen. It says "Starting Window Login