JDBC drivers not found---Pls help
Hi All,
Pls help me out to solve this issue
I have XI 3.0 and R3 4.7 EE seperately . (Both are for education purpose)
While doing JDBC scenario, I got error <b>"JDBC drivers not found"</b> in Adapter Framework. When contacted I was told to install JDBC drivers according to R3 4.7 EE's Database version and not to disturb XI database. We have Oracle database for R3 4.7 EE.
My questions are
1. Is that correct that I should not disturb XI database ?
2. If I install JDBC drivers according to R3 4.7 EE's Database version , In future will I get any problem like the same and other when I do JDBC scenario ?
3. I have been searching but not getting the right place to download JDBC drivers.
Could you please give me the link where I can download JDBC drivers ?
Thanks in advance
ss
Hi,
you can find JDBC drivers here :
<a href="http://developers.sun.com/product/jdbc/drivers">http://developers.sun.com/product/jdbc/drivers</a>
Similar Messages
-
I still cannot burn a cd even when I updated my software to 10.6.8 keep getting same message disc burner or software not found pls help
Have you tried to restart the Mac?
Another program may be blocking the drive.
If restarting does not help, check out the questions here:
Re: Disc Burner or Software not found... -
Error:RefTo B2B MessageID not found-- pls help
Hi,
I had configured two TP's with Acme and Globalchips and the mode of communication is ebms.Acme is sending the PO to Globalchips in return Gloablchips is sennding a ACk. On Globalchips side there is no error while on Acme side i am getting the following error while receiving the ACK
Description: RefTo B2B MessageID not found
StackTrace:
Error -: AIP-50904: ReferTo message not found
at oracle.tip.adapter.b2b.engine.Correlation.incomingCorrelate(Correlation.java:246)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1704)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2554)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2424)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2379)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
Please Help
Kartheek
Edited by: user10614137 on Nov 18, 2008 8:13 AMHi prassanna,
There is no error begore the ref to message id not found error.
The B2B log:-
2008.11.19 at 10:54:57:978: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Protocol Collaboration Id : Acme@0A4C72FB11DB3354C7A000001B2D7E10
2008.11.19 at 10:54:57:978: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate Enter
2008.11.19 at 10:54:57:978: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate Message type is not OUT_OF_BAND_EXCEPTION
2008.11.19 at 10:54:57:978: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:getB2BMsgId Protocol Message Id: Acme@0A4C72FB11DB3354C7A000001B2D7E10 Protocol Collaboration Id: Acme@0A4C72FB11DB3354C7A000001B2D7E10
2008.11.19 at 10:54:57:978: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getB2BMsgId :SQLException ORA-06550: line 1, column 7:
PLS-00201: identifier 'GET_WIREMESSAGE_DETAILS' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
2008.11.19 at 10:54:57:994: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate RefTo B2B MessageID not found
2008.11.19 at 10:54:58:041: RMI TCP Connection(2)-10.76.114.251: B2B - (DEBUG) DBContext commit: Transaction.commit()
2008.11.19 at 10:54:58:041: RMI TCP Connection(2)-10.76.114.251: B2B - (DEBUG) DBContext commit: Leave
2008.11.19 at 10:54:58:822: Thread-10: B2B - (ERROR) Error -: AIP-50904: ReferTo message not found
at oracle.tip.adapter.b2b.engine.Correlation.incomingCorrelate(Correlation.java:246)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1704)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2554)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2424)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2379)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
2008.11.19 at 10:54:58:885: Thread-10: B2B - (ERROR) Error -: AIP-50904: ReferTo message not found
at oracle.tip.adapter.b2b.engine.Correlation.incomingCorrelate(Correlation.java:246)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1704)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2554)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2424)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2379)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
2008.11.19 at 10:54:58:885: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate Error in Correlation
2008.11.19 at 10:54:58:885: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionAfterIncomingTPA Enter
2008.11.19 at 10:54:58:885: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Enter
2008.11.19 at 10:54:58:885: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error message is Error -: AIP-50904: ReferTo message not found
regards
Rakesh
Edited by: rakeshkumar on Nov 18, 2008 9:39 PM -
Mysql jdbc drivers not found in weblogic server
I want to create a connection pool in weblogic server,
and use mysqldatabase.
My drivers is "org.gjt.mm.mysql.Driver"
I put the jar in "D:\bea\weblogic700\server\lib" ,but when i apply ,there is
an error blow:
Error creating connection pool
at weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:635)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:419)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)<2003-4-6 ����10��00��34��> <Error> <JDBC> <001060> <Cannot startup connection pool "mssqlserverPool" weblogic.common.ResourceException: Cannot load driver class: org.gjt.mm.mysql.Driver>
Can anybody tell me why,thanks!Weblogic has been designed for nannies...
I've developed a application which uses internally my own jdbc-driver.
After months of really hard work on tomcat (the application works fine) I've tried migrate it to weblogic.
But ...
In weblogic seems mandatory to put the jdbc drivers out of the war!!!. Brilliant!!!
If I move the driver out, I need move the 50% of the application out, also!
If I move part of the application out, nothing works, because... �are the class loaders distinct?. And I'll need to do a lot of extra work because one day one weblogic architect had a great great inspiration.
In the future I'll suggest to my customers to run and not stop when they listen the WEBLOGIC word.
Regards,
Pablo -
Can anyone help pls, my computer says 'device drivers not found?? ;-(
can anyone help pls, my computer says 'device drivers not found?? ;-(
Is the latest version of iTunes installed?
-
»HP 14-d008au Notebook PC drivers not found. wifi device not working on ws 8.1
recently I install windows 8.1 but unfortunatly I couldn't found my drivers on hp s website. my bluetooth and wifi system is not working. pls help me
Hi:
HP is aware of the drivers missing from the support pages issue and is working on resolving it.
It is affecting hundreds of notebook models.
Since I don't work for HP, I do not know when the sites will be operational again.
This has happened once before, so hopefully they learned from past experience how to troubleshoot the problem.
With the Thanksgiving holiday in the United States, that has delayed things, I'm sure.
We are on the fourth day of this problem.
Please take the following steps so I can figure out what model wireless card your notebook uses...
Go to the device manager and click on the Network Controller needing drivers.
Then click on the Details tab at the top of the network controller window.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that list and select the third item (Hardware ID's).
Post the top string of characters you see in the window that start with PCI\VEN: -
Unable to find data source null [Caused by: jdbc/Apps1DataSource not found]
Hi,
I am using OA Adapter which listens to an EBiz HRMS event, and I am encountering the following error in $Home\j2ee\oc4j_soa\log\oc4j_soa_default_group_1\oc4j\log.xml while registering the ESB service.
Error details:
<MSG_TEXT>Failed to process control event for Service "DefaultSystem.SyncWorkerPartyEbizOAAdapter" due to an error while adding the Service! Reason : oracle.tip.esb.server.common.exceptions.BusinessEventFatalException: An unhandled exception has been thrown in the ESB system. The exception reported is: "ORABPEL-12517
AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
The Resource Adapter Oracle Applications Resource Adapter was unable to activate the endpoint oracle.tip.adapter.apps.AppsWFBesQueueDequeueActivationSpec:{MessageSelectorRule=tab.user_data.event_name = 'oracle.apps.per.api.person.update_person', QueueName=WF_BPEL_Q, Consumer=ORA_6krj2dpn70s36c1g6h1k8dhi8h, DatabaseSchema=APPS, AppsEventSchema=ANY_SCHEMA} due to the following reason: javax.resource.ResourceException: Unable to find data source null Caused by: jdbc/Apps1DataSource not found
Please correct the reported issue and redeploy the BPEL process.
at oracle.tip.adapter.fw.jca.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:566)
at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.activateInboundJcaEndpoint(ESBActivationAgent.java:390)
at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.performEndpointActivation(ESBActivationAgent.java:306)
at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.activateEndpoint(ESBActivationAgent.java:236)
at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.activateEndpoint(ESBActivationAgent.java:209)
at oracle.tip.esb.server.service.impl.inadapter.InboundAdapterService.activateEndpoint(InboundAdapterService.java:177)
at oracle.tip.esb.server.service.impl.inadapter.InboundAdapterService.activateService(InboundAdapterService.java:119)
at oracle.tip.esb.server.service.EsbServiceFactory.activateEsbService(EsbServiceFactory.java:222)
at oracle.tip.esb.server.service.EsbServiceFactory.addEsbService(EsbServiceFactory.java:240)
at oracle.tip.esb.server.common.RuntimeESBSystem.addService(RuntimeESBSystem.java:211)
at oracle.tip.esb.common.system.ServiceEventsHandler.handleCreateService(ServiceEventsHandler.java:72)
at oracle.tip.esb.common.system.MetadataChangeListener.handleServiceEvent(MetadataChangeListener.java:136)
at oracle.tip.esb.common.system.MetadataChangeListener.onMetadataChange(MetadataChangeListener.java:85)
at oracle.tip.esb.common.control.ControlMessageHandler.handleMessage(ControlMessageHandler.java:115)
at oracle.tip.esb.server.dispatch.agent.ESBWork.process(ESBWork.java:162)
at oracle.tip.esb.server.dispatch.agent.ESBWork.run(ESBWork.java:120)
at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
at java.lang.Thread.run(Thread.java:595)
Caused by: javax.resource.ResourceException: Unable to find data source null
at oracle.tip.adapter.apps.AppsManagedConnectionFactory.getDataSourceConnection(AppsManagedConnectionFactory.java:411)
at oracle.tip.adapter.apps.AppsManagedConnectionFactory.getConnection(AppsManagedConnectionFactory.java:288)
at oracle.tip.adapter.apps.AppsManagedConnection.getConnection(AppsManagedConnection.java:85)
at oracle.tip.adapter.apps.AppsConnection.getJdbcConnection(AppsConnection.java:70)
at oracle_tip_adapter_apps_AppsConnection_Proxy.getJdbcConnection()
at oracle.tip.adapter.aq.database.MessageReader.establishDBconnection(MessageReader.java:358)
at oracle.tip.adapter.aq.database.MessageReader.<init>(MessageReader.java:265)
at oracle.tip.adapter.aq.inbound.AQActivationSpecDequeuer.init(AQActivationSpecDequeuer.java:142)
at oracle.tip.adapter.aq.AQEndpoint.<init>(AQEndpoint.java:99)
at oracle.tip.adapter.aq.AQResourceAdapter.endpointActivation(AQResourceAdapter.java:73)
at oracle.tip.adapter.apps.AppsResourceAdapter.endpointActivation(AppsResourceAdapter.java:147)
at oracle.tip.adapter.fw.jca.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:541)
... 20 more
Caused by: javax.naming.NameNotFoundException: jdbc/Apps1DataSource not found
at com.evermind.server.rmi.RMIServerContext.lookup(RMIServerContext.java:207)
at com.evermind.server.ApplicationContext.unprivileged_lookup(ApplicationContext.java:257)
at com.evermind.server.ApplicationContext.lookup(ApplicationContext.java:197)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at oracle.tip.adapter.apps.AppsManagedConnectionFactory.getDataSourceConnection(AppsManagedConnectionFactory.java:408)
... 31 more
</MSG_TEXT>
I have added the connection properties in $Home\j2ee\oc4j_soa\application-deployments\defaul\oc4j-ra.xml as follows:
<connector-factory location="eis/Apps/apps1" connector-name="Oracle Applications Adapter">
<config-property name="xADataSourceName" value="jdbc/AIADataSource"/>
<config-property name="dataSourceName" value=""/>
<connection-pooling use="none">
</connection-pooling>
<security-config use="none">
</security-config>
</connector-factory>
Please correct me if the connection properties are wrong.
I tried AppsEventSchema with 'NO-SCHEMA' and 'ANY-SCHEMA' also.
If I use File Adapter I was able to register the ESB and instances were created successfully.
My versions:
JDEV: 10.1.3.3.0
SOA: 10.1.3.3.0
I have done a lot of research on this but in vain. Is there any patch for rectifying this error?
Help me on this issue pl.
Regards
RKYou need to check your datasource name jdbc/AIADataSource
Check out your data-sources.xml to make sure you didn't mistype it. -
JDBC Driver not found when connecting to Data Federator XI 3.0 SP3
Hello,
I am trying to connect Crystal 2008 to Data Federator however I am getting the Error
Failed to open connection.
Details: JDBC Driver not found.
The JDBC Drivers are installed and working for the Universe Designer, however I am unable to get it working for Crystal. I am using the following connection parameters on Crystal:
Connection URL: jdbc:datafederator://<<servername>>:3055/<<catalog>>
Database Classname: com.businessobjects.datafederator.jdbc.DataFederatorDriver
Any Advice on what I may have missed?The issue was solved, thanks to Patric Wan:
u201CFailed to open the connection. Details: JDBC driver not found.u201D
This means Data Federator JDBC driver was not added to:
C:\Program Files\Business Objects\common\<version>\java\CRConfig.xml
How to connect the Data Federator Server using JDBC?
1. Retrieve the following files from the machine where Data Federator is installed, from the directory [data-federator-installation-dir]/JdbcDriver/lib.
- thindriver.jar
- avalon-framework-4.1.5.jar
- jacorb.jar
- log4j-1.2.8.jar
- logkit-1.2.jar
2. Copy these files to a directory of your choice ([your-jdbc-driverdirectory]).
3. Add [your-jdbc-driver-directory]/thindriver.jar to CRConfig.xml <Add to Classpath tag, you can refer to original sample.CRConfig.xml should be at: C:\Program Files\Business Objects\Common\4.0\java\CRConfig.xml, or search your BOBJ products install to find this file>
4. URL: jdbc:leselect://<host>[:<port>][/[<catalog>]][[;param-name=value]*]
Class Name : LeSelect.ThinDriver.ThinDriver
Edited by: Craig Sander on Feb 12, 2011 8:22 PM -
I am trying to get familiar with the SOA Suite and installed Oracle Xe DB and SOA Suite in Windows. I followed all the steps as in the manual but when trying to do the folowing step
Right-click FulfillmentESB, and select Register with ESB > OrderBookingIS
I get the error javax.naming.NameNotFoundException: jdbc/esb not found
xml returned :<deploymentSummary>
<message>Entity Deployment Failed</message>
<errors>
<error code="1000" severity="5">
<description/>
<fix>Contact Oracle Support</fix>
</error>
</errors>
</deploymentSummary>
I found some of the post on jdbc/esb error but seems much advance and could not follow where to start. Can some body guide me to check where the problem is.
Would appreciate any help.I am also getting the same error cant find driver for my jdbc connection. 1.I set it up and it worked for 3 days then got that message
2.reinstalled crystal reports 2011
3. using Connector/J 5.1.33.
4. edited the classpath like before and same error. How do i fix this? -
Incoming Payment Error(-2028) Data source - No data found, pls help me
Dear friend,
Im struggle in Adding Incomming Payment, I got -2028 Error msg,
DATA SOURCE NO DATA FOUND pls help me to solve
Its My code
Public Sub incopay(ByVal oform As SAPbouiCOM.Form)
Dim incom As SAPbobsCOM.Payments
Dim value As Integer
Dim strerror As String
Try
Dim rset As SAPbobsCOM.Recordset
oitem = oform.Items.Item("om")
oedit = oitem.Specific
vfd1 = oedit.String
incom = ocompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oIncomingPayments)
incom.AccountPayments.AccountCode = acc
incom.AccountPayments.AccountName = accn
incom.AccountPayments.Decription = "deposit"
incom.AccountPayments.SumPaid = vfd1
'incom.CardCode = "C1"
'incom.CardName = "Shama Broadcast Contents & Services (P) Ltd."
incom.DocDate = Now
incom.DueDate = Now
incom.TaxDate = Now
incom.DocCurrency = "INR"
incom.Reference2 = 2
incom.JournalRemarks = "Incoming Payments - 161020"
'incom.AccountPayments.Add()
'value = incom.Add
incom.CheckAccount = "102020"
incom.Checks.DueDate = Now
incom.Checks.CountryCode = "IN"
incom.Checks.BankCode = "HDFC"
incom.Checks.Trnsfrable = SAPbobsCOM.BoYesNoEnum.tNO
incom.Checks.CheckSum = 100
incom.Checks.Add()
incom.AccountPayments.Add()
value = incom.Add
Catch ex As Exception
oapp.MessageBox(ex.Message)
End Try
''incom.AccountPayments.Add()
''value = incom.Add()
If value <> 0 Then
ocompany.GetLastError(value, strerror)
MsgBox(value & " " & strerror)
End If
End Sub
Regards,
Hempradeep.SHi Hempradeep,
I haven't tried executing your code, but suggest that you try and solve it with elimination. This means you make your code shorter and shorter until it posts.
So firstly take out the account payment and the check payments and just do a cash payment and see if it posts. If it posts then you gradually add the code you hade previously until it gives you that error again.
That error you got can be because of many reasons. It could be that the cardcode, gl account, currency, etc, etc, etc does not exist. It could be because of any data you specify from another table does not exist or does not relate to this object. Like when you're posting to a customer and you actually specify a supplier (just an example and not your problem).
Start with a very basic incoming payment and work your way up to the code you've got there now.
Good luck,
Adele -
Kernel Panic ACIP drivers not found installing OS X (10.4.9) on External HD
Hi
, my internal HD on the Macbook ( Macbook White 13" Core2Duo , 2007 Edition) died a couple of days ago ( Seagate HD started to make noises and was not recognice by the Macbook ).
So i wanted to install the OS X on a External HD (Transcend Storejet 25D3 640Gig, so that i could boot the mac from the External.
The Format and Partition of the HD and so the installation of the first DvD runs without any Problem, but when its finish and wants to re-boot, i got the Kernel Panic on the drivers not found for the ACIP.
Its not possible at all to install and Boot a Macbook using OS X from a External HD ? Or, what i'm doing wrong here ? Any Ideas ?
Thanks a lot
Indy72Hi Lissa
, thanks for your help, but i replace the external HD with the "broken" internal HD and was able to continue with the installation without any problems. It seems that for some reason its not working to get some drivers for the USB connection of the HD, maybe by firewire would have work, but i dont have one =) .
Now lets hope that the Seagate Momentus 5400.3 ST9120822AS its not badly damage so that some Data can be restored.
Indy72 -
I have deployed one application containing youtube video but it is not working pls help
I have deployed one application containing youtube video but it is not working pls help Application is build using struts2 and is deployed in oracle cloud, login page works fine but the success page is not displayed please help
Hello,
A wild guess, given the lack of details:
I wonder whether it would violate the http://en.wikipedia.org/wiki/Same-origin_policy ?
This is part of the security infrastructure.
"Stealing" content to insert it anywhere else might also violate copyrights?
Technically, does it at least work "on premises" onto WLS 10.3.6?
Regards
Patrick. -
my ipod touch 4 camera icon has disappeared and even does not open in any applications.. have restored it and its running on 4.3.5 not jailbroken pls help??
it does not even appear in the search barIs the Camera turned on in Restrictions? Go to Settings>General>Restrictions.
-
I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP
I am facing the same issue! I bought 5c few days back
and everything was fine till I updated the software 7.0.4!
Whenever am connected to wifi am unable to make a call and if someone tries
Calling me they get the message that my number is not
Reachable! When I go back to 3G the calls work perfectly!!
Please help me out since I use wifi more than my network.
Appreciate any advise on this -
when i give end location from my location which is selected from the options available, also i receive the message that the directions could not found- pl. help
# Yes, if you go to accounts.firefox.org, sign out, you will now be signed out.
# Sign back in, and you will be asked to save the password you entered.
# This will save the password and autocomplete if you have this option turned on.
I am not exactly sure why the menu did not detect the password change or if it was stored incorrectly after you changed it? But after storing the correct password you can manage any duplicate passwords in the password manager.[[Password manager - Remember, delete and change saved passwords in Firefox]]
Maybe you are looking for
-
I'm is developing on dot Net ( Web form ) and Database is Oracle. When i run a procedured store what is using to summary data ( on 20 minutes) then about 20 minutes IE display "Page not find...". I think request is timeout. Can you help me? Thanks
-
Time Constraints and Boundary Events in BPM
Hi all, I have done the following: In the Task window, Time Constraints tab - Checked "Define a default completion deadline" with the offset as 3 minutes. - Checked the "Raise critical exception when deadline is reached" checkbox. In the boundary eve
-
How do I get this effect for my voice?
I'm recording voice in Logic Pro. What would be the inserts for a soft, mellow, rich, full-sounding vocal track? Something along this line: http://www.youtube.com/watch?v=nzW3mc-Ac58&feature=related Thanks in advance! ND
-
Travel & Expenses Managers are receiving tasks for approval even when Saved
Hi All, I am assigned some ESS Travel & Expenses application issues. One issue is Usually When the Employee tries to Create a Travel Request and click on "Save and Send" a mail is triggered and reqest will go to manager for Approval. But in our case,
-
Problema con Extension Manager cc
no puedo instalar Extension Manager cc se instalar pero cuando termina la instalacion me dice ha fallado un parche y no me aparece en ningunas de las aplicaciones ayuda urgente