JDBC Sender Adapter Error

HI Friends,
I have configured the JDBC Sender Adapter with parameters as
Driver : oracle.jdbc.driver.OracleDriver
Connection : jdbc:oracle:thin:system:netweaver:@172.25.4.221:1521
But Iam getting an error in Componenet Monitoring:
History:
- 2006-05-30 04:55:36 UTC: Error: Stopped unexpectedly - reconfigure and activate to continue processing. Error: java.lang.NullPointerException
- 2006-05-30 04:55:36 UTC: Processing started
How to resolve this??
Regards,
Raju

Hi
Thanks for the reply.
I tried with jdbc:oracle:thin:@172.25.4.221:1521:netweaver and
jdbc:oracle:thin:@172.25.4.221:1521:system
Now Iam getting another error.
Sender Adapter v2108 for Party '', Service 'TBIT40_XI_LEGACY_BS_04':
Configured at 2006-05-30 05:12:30 UTC
History:
- 2006-05-30 05:13:00 UTC: Retry interval started. Length: 20.000 s
- 2006-05-30 05:13:00 UTC: Error: Accessing database connection 'jdbc:oracle:thin:@172.25.4.221:1521:system' failed: DriverManagerException: Cannot establish connection to URL 'jdbc:oracle:thin:@172.25.4.221:1521:system': SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=153093376)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4))))
- 2006-05-30 05:13:00 UTC: Processing started
Can U please solve it..
regards,
Raju

Similar Messages

JDBC Sender Adapter error locking issue

Hi ,
Getting error:
Database-level error reported by JDBC driver while executing statement 'UPDATE OrdersTo_SAP SET Read_By_PI_Fl ='P' WHERE Read_By_PI_Fl is null'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: Transaction (Process ID 117) was deadlocked on lock | communication buffer resources with another process and has been chosen as the deadlock victim. Rerun the transaction.'. For details, contact your database server vendor
I have increased the time out period also changed the isolation level to serializable but no result. Channel is getting the error very frequently.
Can any one please look into the error.
Thanks,
Swapnashree

Hi Swapnashree - Are there multiple sources which will update this table? or just PI?
How many server nodes you have?
However when i search in Microsoft forums, i found the below. Please share it with your DBA to investigate further..
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/194f18b0-03b2-4e8f-8c67-5c92373c3efd/transaction-process-id-135-was-deadlocked-on-lock-resources-with-another-process-and-has-been?forum=sqlintegrationservices
http://technet.microsoft.com/en-us/library/aa213030(v=sql.80).aspx
Transaction (Process ID 51) was deadlocked on lock resources with another process and has been chosen as the deadlock vi…

JDBC sender adapter outofmemory error

Dear friends,
We are getting following error on JDBC sender Adapter: Error during conversion of query result to XML: java.lang.OutOfMemoryError: Java heap space (failed to allocate 1073741848 bytes)
I have read blogs where there have been suggestions to limit the amount of data picked by using WHERE condition and not using SELECT *
In our scenario we are creating GL IDOCs . In SQL when PI picks it up it needs to get all the corresponding Header and line items together. We cannot randomly pick 1000 records at a time. The SQL table has 500,000 rows in the following format
H H H L1 L1 L1
H H H L2 L2 L2
H H H L3 L3 L3
H1 H1 H1 L1 L1 L1
H1 H1 H1 L2 L2 L2
H1 H1 H1 L3 L3 L3
Please let me know how can we solve this issue?
Thank you,
Teresa
Edited by: Teresa lytle on Sep 27, 2011 3:13 PM

If you are using oracle database, uses ROWNUM field to fetch first set of records and you can update those records with the flag as true.
similarly If you are using MS SQL database, uses SELECT TOP command to fetch first set of records and you can update those records with the flag as true.
Like File/FTP adapter, the next poll interval would be as scheduled. The Administrator can then alter the table contents, to ensure lesser no of records are picked up.
Here You need to limit the no of rows if you again face the problem. Please chec the SAP Note
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1296819

JDBC Sender adapter - Oracle - Stored Procedure - Error

Hello,
Need few clarifications on JDBC sender adapter and stored procedures when connecting to Oracle DB.
My scenario is, Oracle to SAPBW. So in sender JDBC adapter, we have used a SP having multiple SQL statements it, esp. one of the SELECT statment having Joins on a table and View.
My questions are,
1) Is it possible to have more SQL statements in SP for Sender JDBC?
2) Is the SP of Oracle DB returns resultset or cursor?
I have tried in searching the forum perticularly for connecting to Oracle as Sender and below like said that there is a limitation of XI JDBC when connecting to Oracle.
Executing an Oracle Stored Procedure from Sender JDBC adapter
So please clarify the doubts and help me.
With regards,
Jilan

Hi Jilan,
Unlike what was mentioned in the link given by you that oracle returns cursor and not resultset is not completely true. It may be difficult but certainly not impossible.
Refer : http://www.enterprisedt.com/publications/oracle/result_set.html
regards
joel

JDBC Sender Adapter - No Namespace found

Hello
I am currently using PI 7.1. The scenario is JDBC to ECC ABAP Client Proxy. When the JDBC Sender Adapter sends the data to the Integration Server, the root element does not contain the xmlns attribute. This root element is constructed from the Document Name of the JDBC Sender Adapter attribute.
I am getting the following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_HIS_Material_Consumption_</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ns0:MT_Material_</SAP:P3>
<SAP:P4>Consumption_ECC/Material. Values missing in queue~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_HIS_Material_Consumption_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:MT_Material_Consumption_ECC/Material. Values missing in queue~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
When I perform a test at RWB, the message gets posted successfully. Once posted, the payload of this message contains the xmlns attribute.
Here is the root element from both the instances:
From RWB: <ns0:MT_Material_Consumption_JDBC xmlns:ns0="http://xxx.com/xxx/finance">
From JDBC Adapter: <ns0:MT_Material_Consumption_JDBC>
Could you please let me know, what has to be done to obtain the xmlns in the sender payload?
Thank you in advance.
John Jeyaraj
Edited by: John jeyaraj on Apr 7, 2011 8:22 AM

Hi Hiren
When I test the MM without the xmlns attribute, I get the following error:
The prefix "ns0" for element "ns0:MT_Material_Consumption_JDBC" is not bound.
When I add the xmlns attribute, the mapping is successful.
Thanks
John

JDBC Sender Adapter

Hi everybody
I have the following error in my JDBC to JDBC scenario; I configured the JDBC sender adapter and receive the following message back. In the Configuration I set Document Name to MT_ScanningStatus:
<?xml version="1.0" encoding="utf-8" ?>
<MT_ScanningStatus>
<row>
<ScannerNb>1</ScannerNb>
<Status>0</Status>
</row>
<row>
<ScannerNb>2</ScannerNb>
<Status>2</Status>
</row>
<row>
<ScannerNb>3</ScannerNb>
<Status>0</Status>
</row>
<row>
<ScannerNb>4</ScannerNb>
<Status>2</Status>
</row>
</MT_ScanningStatus>
I defined the corresponding datatype as follow:
DT_ScanningStatus Complex Type
 row Element 1...unbounded
 ScannerNb Element 1
 STatus Element 1
In the following Mapping I tried to Map this structure to the Structure used to send an Update SQL Statement to the JDBC Receiver to update the same table. A normal Test in the Mapping Tool runs fine but when I enter under source the above incoming Message from the JDBC Adapter I got the following error. I think the incoming message cannot be interpreted. Can someone support me? I read the documentation for the JDBC adapter and also a lot of weblogs and discussion threads. Maybe someone knows a weblog describing more detailed the sender adapter and how to handle the incoming Message!!
Thanks in advance Oliver
14:58:03 Start of test
Compilation of MM_JDBC_to_JDBC_test successful
Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:130)
at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68)
Root Cause:
com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)(:main:, row=1, col=8) -> com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
at com.sap.engine.lib.xml.parser.XMLParser.scanPI(XMLParser.java:2009)
at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2657)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2713)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:132)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:142)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:276)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:338)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:128)
at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:144)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:128)
at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68)
Caused by: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
at com.sap.engine.lib.xml.parser.XMLParser.scanPI(XMLParser.java:2009)
at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2657)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2713)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:132)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:142)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:276)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:338)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
... 3 more
Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)

Hi Oliver,
>>>>source the above incoming Message from the JDBC Adapter I got the following error. I think the incoming message cannot be interpreted.
do this:
in the test tab try your mapping once more
(the correct one)
then save the source xml as file
next compare this saved file with the one
you get from the jdbc sender
>>>>>Declaration not allowed here.(:main:, row:1, col:8)
and compare the first lines in those two XML files
are they the same?
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Problem with JDBC Sender adapter

hi guys!
I´ve problem in PI 7.0, with the JDBC Sender Adapter, execute select sentence and update status in Oracle database.
In RWB Message Monitoring and SXMB_MONI I can't see any message.
Someone have any idea how to fix it?
Thanks in advance.

Hi David,
First check on the sender communication channel, if no data has been picked up by PI on channel,
then check the configuration of channel in the ID, especially select query.
If that is ok, then ask the sender application team(oracle database team) to run the query on their side
and to check if they are getting any data.
There could be the possibility of error in data also.
-Supriya.

Jdbc sender adapter hangs and starts showing "Processing Started" forever

Dear ,
We are facing some issues with jdbc sender adapter channel on production system
Environment : XI 3.0 SP 20 + HP-UX 11.23 ia64 + Oracle 10.2
Sometimes it hangs and starts showing "Processing Started" forever on communication channel monitoring .
There is no error log for this.
If i stop it and then start it , no use.
If i copied this to a new one then it works.
I have found few SAP note like 1078420,1083488 , but my system is already at higher patch level.
Can you please advise me something as we are facing in production frequently.
Regards,
Sandeep

Hi Sandeep,
This problem even we too faced in our project and thought of many stupid things finally found that the JDBC adapter is LOCKED.
Check in the Visual Admin >Cluster> "LOCKING ADAPTER"
we get a option of Display Locks .Check for an entry with
NAME : $XIDBAD.JDBC2XI
reset the locks and restart the CC ,now it works fine.
Note 1083488 - XI FTP/JDBC sender channel stop polling indefinitely(04/04S)
Thanks
Sudharshan

JDBC Sender Adapter - NOT FETCHING RECORDS...

Hello Experts,
I know this was answered in a separate thread (JDBC Sender Adapter - NOT FETCHING RECORDS -PROCESSING STARTED).
However, my question is, Is there a way that we can be notified if a channel has stopped fetching records?
or is there a reporting tool that can be used to check/monitor if a channel is not processing any messages?
Thanks & Kregards,
allar

Hi Sreedhar,
Thanks for your reply.
These case is not being captured by our alert configuration because its not throwing any error.
in the communication channel monitoring, we see only something like this..:
3/16/09 8:25:19 PM Processing started
3/16/09 8:34:20 PM Processing started
3/16/09 8:33:55 PM Processing started
3/16/09 8:32:54 PM Processing started
but no error is being displayed nor sent.
Also, there was a case that the channel just stopped fetching, even though everything is active.
example log:
3/12/09 8:32:54 PM Processing started
We're looking for ways on how we can trap these scenarios as early as possible, get us notified and perform adapter-lock release when needed.
Regards,
allar

JDBC Sender Adapter : java.sql.SQLException: Cursor state not valid.

Hello all,
We have configured JDBC Sender Adapter which fetches around 10K records with poll interval 1hr from DB2 System .
It was working fine,suddenly it started throwing an exception in Adapter Monitoring :
Error during conversion of query result to XML: java.sql.SQLException: Cursor state not valid.
It is not fetching any records.
Without changing any configurations when we tried to fetch to around 1000 records it's working fine.
For 10K records same exception persists
What could be the reason ?How to resolve this issue?
regards
GangaPrasad

Hello Christophe ,
Trace in VA :::
Date : 05/09/2008
Time : 11:45:57:750
Message : Unexpected error converting database resultset to XML, reason: java.sql.SQLException: Cursor state not valid.
 at java.lang.Throwable.<init>(Throwable.java:194)
 at java.lang.Exception.<init>(Exception.java:41)
 at java.sql.SQLException.<init>(SQLException.java:40)
 at com.ibm.as400.access.JDError.throwSQLException(JDError.java:389)
 at com.ibm.as400.access.JDError.throwSQLException(JDError.java:366)
 at com.ibm.as400.access.AS400JDBCResultSet.getValue(AS400JDBCResultSet.java:3580)
 at com.ibm.as400.access.AS400JDBCResultSet.getString(AS400JDBCResultSet.java:3223)
 at sun.reflect.GeneratedMethodAccessor459222074.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:309)
 at com.sap.aii.adapter.jdbc.sql.jdbctrace.TraceInvocationHandler.invoke(TraceInvocationHandler.java:45)
 at com.sap.aii.adapter.jdbc.sql.jdbctrace.$Proxy254.getString(Unknown Source)
 at com.sap.aii.adapter.jdbc.JDBC2XI.convert2XML(JDBC2XI.java:954)
 at com.sap.aii.adapter.jdbc.JDBC2XI.invoke(JDBC2XI.java:492)
 at com.sap.aii.af.service.scheduler.JobBroker$Worker.run(JobBroker.java:475)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:99)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:119)
Severity : Error
Category : /Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/JDBC
Location : com.sap.aii.adapter.jdbc.JDBC2XI.convert2XML(ResultSet, ResultSetMetaData)
Application :
Thread : XI JDBC2XI[JDBC_SND_DB2_VehicleReceiving/DB2PRD00/]_170
Datasource : 12428950:/usr/sap/PXI/DVEBMGS01/j2ee/cluster/server0/log/applications/com.sap.xi/xi.log
Message ID : 00145E742794005E0014980B000000BE00044CC763766C4F
Source Name : /Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/JDBC
Argument Objs : java.sql.SQLException: Cursor state not valid.
 at java.lang.Throwable.<init>(Throwable.java:194)
 at java.lang.Exception.<init>(Exception.java:41)
 at java.sql.SQLException.<init>(SQLException.java:40)
 at com.ibm.as400.access.JDError.throwSQLException(JDError.java:389)
 at com.ibm.as400.access.JDError.throwSQLException(JDError.java:366)
 at com.ibm.as400.access.AS400JDBCResultSet.getValue(AS400JDBCResultSet.java:3580)
 at com.ibm.as400.access.AS400JDBCResultSet.getString(AS400JDBCResultSet.java:3223)
 at sun.reflect.GeneratedMethodAccessor459222074.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:309)
 at com.sap.aii.adapter.jdbc.sql.jdbctrace.TraceInvocationHandler.invoke(TraceInvocationHandler.java:45)
 at com.sap.aii.adapter.jdbc.sql.jdbctrace.$Proxy254.getString(Unknown Source)
 at com.sap.aii.adapter.jdbc.JDBC2XI.convert2XML(JDBC2XI.java:954)
 at com.sap.aii.adapter.jdbc.JDBC2XI.invoke(JDBC2XI.java:492)
 at com.sap.aii.af.service.scheduler.JobBroker$Worker.run(JobBroker.java:475)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:99)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:119)
Arguments : java.sql.SQLException: Cursor state not valid.
 at java.lang.Throwable.<init>(Throwable.java:194)
 at java.lang.Exception.<init>(Exception.java:41)
 at java.sql.SQLException.<init>(SQLException.java:40)
 at com.ibm.as400.access.JDError.throwSQLException(JDError.java:389)
 at com.ibm.as400.access.JDError.throwSQLException(JDError.java:366)
 at com.ibm.as400.access.AS400JDBCResultSet.getValue(AS400JDBCResultSet.java:3580)
 at com.ibm.as400.access.AS400JDBCResultSet.getString(AS400JDBCResultSet.java:3223)
 at sun.reflect.GeneratedMethodAccessor459222074.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:309)
 at com.sap.aii.adapter.jdbc.sql.jdbctrace.TraceInvocationHandler.invoke(TraceInvocationHandler.java:45)
 at com.sap.aii.adapter.jdbc.sql.jdbctrace.$Proxy254.getString(Unknown Source)
 at com.sap.aii.adapter.jdbc.JDBC2XI.convert2XML(JDBC2XI.java:954)
 at com.sap.aii.adapter.jdbc.JDBC2XI.invoke(JDBC2XI.java:492)
 at com.sap.aii.af.service.scheduler.JobBroker$Worker.run(JobBroker.java:475)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:99)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:119)
Dsr Component :
Dsr Transaction : d1f629d01d9b11dd984200145e742794
Dsr User :
Indent : 0
Level : 0
Message Code :
Message Type : 1
Relatives : com.sap.aii.adapter.jdbc.JDBC2XI
Resource Bundlename :
Session : 0
Source : /Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/JDBC
ThreadObject : XI JDBC2XI[JDBC_SND_DB2_VehicleReceiving/DB2PRD00/]_170
Transaction : SAP J2EE Engine JTA Transaction : [0ffffffbdffffffa6ffffff960086]
User : J2EE_GUEST
Regards
Ganga Prasad

JDBC sender adapter - driver problems

Hi.
Iu2019m struggling with a little problem regarding the JDBC sender adapter, querying an Oracle database.
Iu2019m making a simple SELECT statement, where one of the fields is of the typeu201DTIMESTAMP(0) WITH LOCAL TIMEu201D.
Making the query in a SQL client works just fine, but in the JDBC sender adapter, it generates this error u201DError during conversion of query result to XML: java.sql.SQLException: Session Time Zone not set!u201D
Iu2019ve searched for answers on numerous forums, and found one place, where the following where the solution:
>>> Hi. The issue is that the driver itself needs to have a time zone
>>> set. You have to call setSessionTimeZone() on the connection object.
Unfortunately it is a bit hard to call this function in the adapter.
Any of you guys have an idea what to do?
I can add, that making a query, where no date fields are selected, works fine in the adapter.
Regards...
Peter

Problem solved...
Put a conversion (CONCAT, SUBSTR, TO_CHAR, etc.) around the date field you are about to fetch, and it works just fine.

JDBC sender adapter: Update before mapping

Dear all,
following scenario:
in a database we have a field called "statpi". We pick all messages that have statpi = 0 and
update the data record to statpi = 1 via UPDATE function in JDBC sender adapter.
Every select statement is limited to 100 data records for each message in PI.
But if one data record is wrong and the mapping failed, of course the complete mapping failed.
My problem: The update function of the JDBC sender adapter has already updated the
data records, although they didn't have been send to target system.
What I need is following thing: The adapter should send the messages and after PI has mapped
the message and send it to target system, the UPDATE command should be executed.
In my opinion, this is only possible with BPM, but I am not familiar with Advanced mode in JDBC
sender adapter and "Transaction isolation level". Is there any workaround for this?
Thanks
Regards
Chris

Stefan Grube wrote:>
> What happens, when new values have entered db meanwhile?
The job that change the DB will be fixed on a certain time. We need to configure
Availability Time Planning to be sure, that we start our select at another time.
>
> > In ideal case the data records are still in statpi=0 and get picked up after
> > the database team has fixed the problem and the adapter polls again.
>
> If the flag is not set, the JDBC adapter would poll the same data again and again.
The adapter should poll every hour. Of course we will have some errors before the
support is able to fix this problem, but because of one message each hour this should
not be the main problem.
> - You could do following: pass the values with an error flag, so you can handle this in receiver application,
I am using the function formatNumber for the field that could raised the error. But to chekc if I am able
to do a workaround here and let the target system fix the error sounds like an interessting possibility.
> - Do a split mapping and create a file where you drop any wrong lines
Also interessting. You mean that all "good" record should be mapped to struc1 and the bad one to struc2.
I am thinking of how to determine which record is wrong. Perhaps with an UDF that checks for this special
error.
> - Use XML validation in sender adpter, so the messages are not processed.
You are full of good ideas. I am not using validation yet and the mentioned field is define as string, but that
is changeable. A good possibility to check the new capability of 7.1.
> - use a stored procedure in DB whee you check data quality to send out.
not sure what this is, but I will discuss with DB team.

JDBC Sender adapter is reading but then there isn't the message in SXMB_MON

Hi,
I have a JDBC to RFC async scenario. All configured.
Now the JDBC Sender adapter is reading the database table and if I go to communication channel monitoring ther is a "Processing finished succefully" message and an message ID like that: "0e4fd3b0acba11ddb65e0002a5adffd2".
But then I go to SXMB_MONI or message monitoring in RWB and there isn't a message to check...
What's happening? How can I know what the JDBC adapter has read and why there isn't an error but there isn't a message?

Hi
Well u r that means no polling happening with u r Select statement
may be format is correct i agree ,,can u able to get resultset using the Select staement running on SQL PLus ??
check wether status flag is set right
paste u r slect statement and update statement
rgds
srini

How to update two tables in a single call using JDBC Sender adapter

Hello All,
The scenario is, database entries have to be selected from two tables and at the same time those tables have to be udpated with the flag.
We are using JDBC sender adapter and in Select Query, we are fetching the data by joinin the two tables.
Update Statemtent: We can only update one table using this statement.
Is it possible to update two tables using the Update Statement without using Stored Procedures.
Let me know.
Regards,
Sreenivas.

Hi Sreenivas,
> Is it possible to update two tables using the Update Statement without using Stored Procedures.
Yes its possible through join statement
Check this links
Update in JDBC Sender adapter for more than one table
data from 2 tables for jdbc sender adapter
Regards
Ramesh

JDBC Sender Adapter - Records sent one at a time

Hello everyone,
Here's a summary of my scenario JDBC > XI > RFC.
My select statement (JDBC) looks like this:
SELECT * FROM BATCH WHERE STATUS='Y'
The problem is, whenever it returns multiple rows, the RFC can only accept one record at a time (1...1), so I need to pick up the records from the DB and send them one at a time.
Currently, this is how the output XML looks like:
<?xml version="1.0" encoding="utf-8" ?>
<ns:SQL_RESP_MT xmlns:ns="http://www.pharmaindustries.com">
<row>
<number>200000000472</number>
<status>Y</status>
</row>
<row>
<number>200000000473</number>
<status>Y</status>
</row>
<row>
<number>200000000474</number>
<status>Y</status>
</row>
</ns:SQL_RESP_MT>
Instead, I need each row to be picked up and sent one at a time.
<?xml version="1.0" encoding="utf-8" ?>
<ns:SQL_RESP_MT xmlns:ns="http://www.pharmaindustries.com">
<row>
<number>200000000472</number>
<status>Y</status>
</ns:SQL_RESP_MT>
<?xml version="1.0" encoding="utf-8" ?>
<ns:SQL_RESP_MT xmlns:ns="http://www.pharmaindustries.com">
<number>200000000473</number>
<status>Y</status>
</row>
</ns:SQL_RESP_MT>
<?xml version="1.0" encoding="utf-8" ?>
<ns:SQL_RESP_MT xmlns:ns="http://www.pharmaindustries.com">
<number>200000000474</number>
<status>Y</status>
</row>
</ns:SQL_RESP_MT>
Does anyone know the changes I need to make in my current SELECT statement or the JDBC Sender Adapter to make this possible.
Thanks in advance!
Glenn

Thank you all for your replies. I'll check out your link in a bit, Phani. Thanks!
A SpliByValue won't work since the BAPI Header is (1...1).
Luckily, during testing, I found out that the BAPI (BAPI_PRODORDCONF_CREATE_TT) handles multiple lines in one of the subelements of the header so that was where I mapped the Rows.
I might need to trigger multiple BAPIs in the future, so I'll take a good look at your suggestions, but for now, I'm marking this question answered.
Warm regards,
Glenn

JDBC Sender Adapter Error

Similar Messages

Maybe you are looking for