JDev 10.1.2 connecting to AS 10.1.3_dp4... fail

Hi,
these are the steps to create a connection to the AS 10.1.3_dp4:
Click Connections - Application Server - New Connection...
Connection Type = Oracle Application Server 10g
Authentication, Username = oc4jAdmin, password = myPwd
Connection:
Enterprise Manager OC4J Host Name = localhost
Enterprise Manager OC4J Http Port = 8888
Remote Server's Oracle Home Directory = C:\oracle\OracleAS\10.1.3_dp4
EJB Client connection:
RMI Server Url = ormi://localhost:12401
RMI Username = oc4jAdmin
RMI password = myPwd
This is the log:
Initializing log
Servlet interface for OC4J DCM commands
Executing DCM command...
Executing command listApplications C:\oracle\OracleAS\10.1.3_dp4 UNDEFINED UNDEFINED UNDEFINED
Command = LISTAPPLICATIONS
Opening connection to Oc4jDcmServlet
Setting username to oc4jAdmin
Sending command servlet DCM
Response code HTTP = 404, HTTP = Not Found
#### HTTP response is not valid
Closing connection to Oc4jDcmServlet
#### DCM command did not complete successfully (404)
#### Invalid servlet path
What is wrong? Can JDev 10.1.2 connect to AS 10.1.3_dp4?
Thanks
aldo

thanks for response,
the note you are referring is relative to Deploying DCM Servlet to Oracle9iAS 9.0.2.x, but I'm deploying to AS 10.1.3_dp4.
My AS 10.1.3_dp4 is a fresh, new and clean installation, so I should not make any DCM Servlet deployment
Probably JDev 10.1.2 does not work at all with AS 10.1.3_dp4
bye
aldo

Similar Messages

  • Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Serve

    Hi!
    I'm using consume adapter service> sqlbinding >  to connect to sql database in order to generate sql schemas.
    I'm getting below error:
    Connecting to the LOB system has failed. 
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
    SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified).
    Christiane

    Hi, 
    As suggested earlier this seems to be a DTC related issue. It can only occur if the DTC settings are not proper or if firewalls don't allow the default ports to communicate.
    Check DTC settings on both SQL and BizTalk Box and also check if MSDTC service is up and running.
    Go to Start
    à Run
    à (type in) Dcomcnfg. You should be inside Component Services MMC.
    Expand Component Services
    à Computers
    à My Computer (right click)
    à Properties
    à MSDTC tab
    à Security Configuration button.
    Select the checkboxes as following : 
    Check the below article from Microsoft Support Team, they have listed all the errors which may come during setting up a new system. They also have your MSDTC error listed.
    Resolving the issues you may face during BizTalk Runtime Configuration
    Thanks,
    Prashant
    Please mark this post accordingly if it answers your query or is helpful.

  • Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is

    hi ,
    when generate the schema , i  got the below error, please any one put your inputs:
    Connecting to the LOB system has failed.  A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
    is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server).

    thaks shanky,
    but facing another , after generate schema from  WCF_SQL, im unable get elements in my schema.
    this is schema generate from storeprocduer , but thru WCF-sql im unable get the elements like
    id, name
    <xsd:schema targetNamespace="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:schema="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes" elementFormDefault="qualified">
      <xsd:import namespace="http://schemas.microsoft.com/sqlserver/2004/sqltypes" schemaLocation="http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd" />
      <xsd:element name="Test.dbo.sample">
        <xsd:complexType>
          <xsd:sequence>
            <xsd:element name="id" type="sqltypes:int" minOccurs="0" />
            <xsd:element name="name" minOccurs="0">
              <xsd:simpleType>
                <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
                  <xsd:maxLength value="1000" />
                </xsd:restriction>
              </xsd:simpleType>
            </xsd:element>
          </xsd:sequence>
        </xsd:complexType>
      </xsd:element>
    </xsd:schema>
    <Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
      <id>18</id>
      <name>BIRADAR</name>
    </Test.dbo.sample>
    <Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
      <id>18</id>
      <name>BIRADAR</name>
    </Test.dbo.sample>
    <Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
      <id>19</id>
      <name>sw</name>
    </Test.dbo.sample>
    <Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
      <id>18</id>
      <name>BIRADAR</name>
    </Test.dbo.sample>
    <Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
      <id>14</id>
      <name>swe</name>
    </Test.dbo.sample>
    <Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
      <id>13</id>
      <name>se</name>
    </Test.dbo.sample>

  • Error: Device 768 (vbd) could not be connected. /etc/xen/scripts/block fail

    Hello OTN,
    After converting/exporting machines from VMware and importing them into OVM i am receiving errors on some of the machines when powering on.
    Here is the complete error message:
    Start - /OVS/running_pool/dirkwin
    PowerOn Failed : Result - failed:<Exception: return=>failed:<Exception: ['xm', 'create', '/var/ovs/mount/483E943AE684484EAD7255356E8F24CC/running_pool/machinename/vm.cfg'] => Error: Device 768 (vbd) could not be connected. /etc/xen/scripts/block failed; error detected.
    >
    StackTrace:
    File "/opt/ovs-agent-2.3/OVSXXenVM.py", line 57, in xen_start_vm
    run_cmd(args=cmd)
    File "/opt/ovs-agent-2.3/OVSCommons.py", line 85, in run_cmd
    raise Exception('%s => %s' % (cmdlist, p.childerr.read()))
    >
    StackTrace:
    File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 131, in start_vm
    raise e
    Searching for this error turned up different solutions but none of them worked.
    One mentioned OVM not being able to handle spaces in vm names but this is not a working solution as most of the machines are just regular names without spaces or special characters.
    Also interesting, sometimes this error does not turn up when powering on BUT the machine just powers off again and returns to its turned off state. Next power on the error returns.
    OS types vary from S10, Win XP and RedHat so a possible connection to the error being the host OS is not there.
    Harddrive types are set to auto. The vm.cfg's of functioning machines do not differ from non functioning machines besides the actual vm name in the vm.cfg
    Any idea to this error or how to solve it ?
    Thanks
    -Stephan

    Hello Sebastian,
    This is one of the vm.cfg which will abort due to the above mentioned error:
    acpi = 1
    apic = 1
    builder = 'hvm'
    device_model = '/usr/lib/xen/bin/qemu-dm'
    disk = ['file:/var/ovs/mount/483E943AE684484EAD7255356E8F24CC/running_pool/vmname/vmname.img,hda,w',
    ',hdc:cdrom,r',
    kernel = '/usr/lib/xen/boot/hvmloader'
    memory = '2048'
    name = 'vmname'
    on_crash = 'restart'
    on_reboot = 'restart'
    pae = 1
    serial = 'pty'
    timer_mode = '0'
    usbdevice = 'tablet'
    uuid = 'a2a62bcb-f9ab-4ec3-8574-7415985cdf0a'
    vcpus = 1
    vif = ['bridge=xenbr0,mac=xx:xx:xx:xx:xx:xx,type=ioemu']
    vif_other_config = []
    vnc = 1
    vncconsole = 1
    vnclisten = '0.0.0.0'
    vncpasswd = 'xx'
    vncunused = 1
    The xend.log also turned up nothing concerning this error. no messages were written into it. No other log has been created by xen in the /var/log/xen directory concerning an issue with the current machine.
    Thanks for your help !
    -Stephan
    ps:mac address + pw is commented out
    Edited by: Stephan Becker on Aug 5, 2010 7:11 AM

  • Connecting to "localhost" on port "21212" failed

    I run startinstgui.bat to install WEBAS640SP9 before I downloaded J2sdk-1_4_2_06.
    I got error message with Connection to SAPinst can not be establish - Connecting to "localhost" on port "21212" failed. I tested with different values - no result.
    Any idea?

    Maybe this could be the case.....
    You have a fault in your network and hostname configuration.
    You hostname should be different to localhost.
    - > rename your full qualified hostname
    -> e.q linux.mydomain.foo
    You can use the configuration tool Yast to change it.
    It should be able use the command ping with your hostname
    If the name of your host is linux.mydomain.foo
    ping linux
    ping linux.mydomain.foo
    should work.
    If your full qualified hostname is linux.mydomain.foo the file
    /etc/hosts should be
    127.0.0.1      localhost      localhost.localdomain
    127.0.0.2      linux          linux.mydomain.foo
    It is important that localhost and linux are mapped to a differnt IP
    address. Something like
    127.0.0.1   localhost    localhost.localdomain   linux
    do not work.
    The best choice to run the NW4 testdrive is to use Suse 9 because you do
    not need to change any configuration. On Suse 9.1 the NW4 also runs but
    you have to set an environment variable and you will get an error
    message because of kernel 2.6
    Also don't forget start boot.sysctl at boot time.
    ln -s /etc/init.d/boot.sysctl /etc/init.d/rc1.d/S99boot.systctl
    ln -s /etc/init.d/boot.sysctl /etc/init.d/rc3.d/S99boot.systctl
    ln -s /etc/init.d/boot.sysctl /etc/init.d/rc5.d/S99boot.systctl
    /sbin/sysctl -p

  • EP 6.0 SP2 PL28 - connection pool for principal type UACC fails

    Hello,
    does anybody have the same problem? - We always lose the LDAP-Connection after restart of the j2ee-Services on our Enterprise Portal. We get then this error-message:
    ->
    <b>connection pool for principal type UACC fails</b>
    Loading application: com.sap.portal.usermanagement
    Loading services:
    Loading service: com.sap.portal.license.runtime|license
    Jul 2, 2005 4:27:09 AM # System_Thread_32 Fatal [class=com.sap.security.core.persistence.datasource.imp.LDAPConnectionManager][method=initConnectionPool()][cl=13324]connection pool for principal type UACC fails
    Thanks in advance.
    Regards,
    Ralf

    Does anybody can help me? - It´s important.
    Thanks in advance.
    Regards,
    Ralf

  • Connect to message server (host/3900) failed: NIEHOST_UNKNOWN.. br SOLUTION

    I am trying to install SLM as DISTRIBUTED SYSTEM. I have installed CENTRAL SERVICES INSTANCE on host 1 and DB instance on host 2.
    and trying to install CENTRAL SERVICE  on host 3.
    CENTRAL SERVICES INSTANCE  and DB instance install successfully.
    I am getting this error message when installing CENTRAL SERVICE.
    here is my sapinst_dev.log
    =======================
    Connect to message server (host/3900) failed: NIEHOST_UNKNOWN.
    ======================================================
    here is my dev
    =========================================================
    trc file: "dev_ms", trc level: 1, release: "700"
    [Thr 16384] Tue Feb 26 20:51:13 2008
    [Thr 16384] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
    systemid   387 (Intel x86 with Linux)
    relno      7000
    patchlevel 0
    patchno    110
    intno      20050900
    make:      multithreaded, Unicode, optimized
    pid        5846
    [Thr 16384] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 5846) [msxxserv_mt. 1824]
    [Thr 16384] SigISetDefaultAction : default handling for signal 17
    [Thr 16384] load acl file = /usr/sap/KGB/SYS/global/ms_acl_info
    [Thr 16384] MsGetOwnIpAddr: my host addresses are :
    [Thr 16384]   1 : [1XX.10.10.222] host1.mycompanyname.com (HOSTNAME)
    [Thr 16384]   2 : [1XX.0.0.1] localhost.localdomain (LOCALHOST)
    [Thr 16384] MsHttpInit: full qualified hostname = host1.mycompanyname.com
    [Thr 16384] HTTP logging is switch off
    [Thr 16384] set HTTP state to LISTEN
    [Thr 16384] MsHttpOwnDomain: own domain[1] = host1.mycompanyname.com
    [Thr 16384] ms/icf_info_server : deleted
    [Thr 16384] *** I listen to internal port 3900 (3900) ***
    [Thr 16384] *** HTTP port 8100 state LISTEN ***
    [Thr 16384] CUSTOMER KEY: >T0444609119<
    =========================================================
    I have changed the hostname in all the file (1) hostname ,(2)/etc/sysconfig/network file . i even checked my hostname and it shows hostname as "HOST1" so i am confused even though hostname is "HOST1" but in dev_ms the IP ADRESS is resolving to "host1.mycompanyname.com"
    3. Also when i am trying to run "startsap" or "stopsap" from host1 where central service instance is installed. It gives me "command not found" although i see all the exe file in /usr/sap/SID/SYS/exe/run. why my command not running.
    . I have added the sapmsSID 3900/tcp entries in both HOST1 and HOST3 services file.

    Only that
    When I grep on Error from the file I get
    more sapinst_dev.log |grep error
    Error number 8 error type SPECIFIC_CODE
    Error number 211 error type SPECIFIC_CODE
    pci_error_tolerance_time                 1440  Default      Immed
    Registering Profile directory /usr/sap/MBA/SYS/profile for beeing one of the sources of additional files to be collected in case of errors
    hth72231:mbaadm 25> more sapinst_dev.log | grep error |more
    Error number 8 error type SPECIFIC_CODE
    Error number 211 error type SPECIFIC_CODE
    pci_error_tolerance_time                 1440  Default      Immed
    Registering Profile directory /usr/sap/MBA/SYS/profile for beeing one of the sources of additional files to be collected in case of errors
    Standard input: END
    other
    TRACE[E]   2014-06-25 10:08:17.327 [syuxcuser.cpp:2762]
               CSyUserImpl_setOsInfos(iastring sName, iastring sID, tSyUserInfo& msUserNewinfo)
               lib=syslib module=syslib
    FSL-05014  Command '/usr/sbin/usermod' with parameters '-G "adm,bin,daemon,lp,mail,other,root,sys,users,sapinst" root' failed with return code 8: Login root
    is currently in use
    But that is not the issue

  • Connection to host as user oracle9i failed

    Examine and correct the following errors, then retry the operation:
    Error - Connection to host as user oracle9i failed: Received unexpected response text : <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <HTML><HEAD> <meta http-equiv="Content-Type" content="text/html; charset=windows-1251"> <TITLE>������: ��������� ����� �� ���� �� ���� ��������</TITLE> <STYLE type="text/css"><!--BODY{background-color:#ffffff;font-family:verdana,sans-serif}PRE{font-family:sans-serif}--></STYLE> </HEAD><BODY> <H1>������</H1> <H2> ��������� ����� �� ���� �� ���� �������� </H2> <HR noshade size="1px"> <P> ��� ���� �� ���� �������� �������: http://rx4640:1830/emd/main? <P> �������� �������� ������: <BLOCKQUOTE> �� ���� �� ���� ������� IP ������� �� ������� <I>rx4640</I> </BLOCKQUOTE> <UL> <LI> <P> �������� �� ����� ���� �������� ���������: <BLOCKQUOTE> Name Error: The domain name does not exist. </BLOCKQUOTE> </UL> <P> ���� ��������, ��: <PRE> ��� �������� �� � � ��������� �� �������� ������ �� �������, ������� � ���� �� ������� �����. ��������� ���� ����� �� ������� ����� � �

    user5616408 wrote:
    1.Which domain - db domain or network domain.
    2.How to correct the error?It would seem that you are supplying a URL - this then returns an HTML error response. This response says "+domain name does not exist+".
    As you provide no info on how you are making this HTTP call, and the fact that you are not getting a HTTP response code error, but a response page... the assumption is:
    a) you are reaching the web server as specified in the URL
    b) the web server is returning the error page
    c) the error related to the web server not being satisfied with the data supplied (or obtained) via that HTTP command it received - for example the query string may fail validation (hostname without a domain name), the command itself may not have a valid referring domain, etc.
    Also as the error response include "+http://rx4640:1830/emd/main?+" (one of the few text strings that are readable on my browser from that error response you have posted), it would seem that the web server expects fully qualified hostnames. I.e. hostnames need to include a domain name. And this URL refers to host "+rx4640+" and does not include a domain qualifier.

  • The original exception was: wapsmod.ms.MsAttachFailed: Connect to message server (pdirmba1/3900) failed: MSENILAYER.

    When trying to install an extra dialog instance to our BW environment in the second step when giving the profile parameter after reading the profiles it comes with the message:
    An exception occurred while connecting to the message server instance MBA/DVEBMGS00 on host pdirmba1, port 3900. DIAGNOSIS: The original exception was: wapsmod.ms.MsAttachFailed: Connect to message server (pdirmba1/3900) failed: MSENILAYER.. SOLUTION: Make sure that the message server is started.
    Message server is started as CI and second DI are already running.
    HP-UX, Oralce11.
    Did set the temp directory and SAPINST_USE_HOSTNAME parameter into the environment of root.
    already tried niping from di to ci on the port and thats working ok

    Only that
    When I grep on Error from the file I get
    more sapinst_dev.log |grep error
    Error number 8 error type SPECIFIC_CODE
    Error number 211 error type SPECIFIC_CODE
    pci_error_tolerance_time                 1440  Default      Immed
    Registering Profile directory /usr/sap/MBA/SYS/profile for beeing one of the sources of additional files to be collected in case of errors
    hth72231:mbaadm 25> more sapinst_dev.log | grep error |more
    Error number 8 error type SPECIFIC_CODE
    Error number 211 error type SPECIFIC_CODE
    pci_error_tolerance_time                 1440  Default      Immed
    Registering Profile directory /usr/sap/MBA/SYS/profile for beeing one of the sources of additional files to be collected in case of errors
    Standard input: END
    other
    TRACE[E]   2014-06-25 10:08:17.327 [syuxcuser.cpp:2762]
               CSyUserImpl_setOsInfos(iastring sName, iastring sID, tSyUserInfo& msUserNewinfo)
               lib=syslib module=syslib
    FSL-05014  Command '/usr/sbin/usermod' with parameters '-G "adm,bin,daemon,lp,mail,other,root,sys,users,sapinst" root' failed with return code 8: Login root
    is currently in use
    But that is not the issue

  • Connection Source for .... failed because the environment is not trusted

    I got a message like this -
    Connection Source for .... failed because the environment is not trusted
    when trying to bind a field to a data connection field. What does this mean? I setup the data connection and it tested out fine.

    I am not exactly sure what you are referring to by the see "Note". I didn't find a "Note" that was related. The only thing I did find was the following:
    "If you are using external data sources in a form design that you want users to fill in Adobe Reader, you must set usage rights for the form by using Reader Extensions Server."
    I am only trying to display back information out of a database. I don't want to write information. Is there any way to get around this?
    Matt

  • Ecently, i intended to download but unfortunately it's already more than 5 attempts. Due to the slow connection and power failure, my download failed to complete. Would it be possible to download the application again? Regards

    Recently, i intended to download but unfortunately it's already more
    than 5 attempts. Due to the slow connection and power failure, my
    download failed to complete.
    Would it be possible to download the application again?
    Regards

    Which application does this concern?  Alternative downloads are available thru the following pages...
    Download and Installation Help -
    https://helpx.adobe.com/download-install.html
    You can also download trial versions of software thru the site linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    http://prodesigntools.com/tag/ddl

  • Unable to connect to XL Reporter.  Login failed for user 'xlruser'

    Hi,
    I have one user getting the following error when starting XLR in 2005:
    Unable to connect to XL Reporter.  Login failed for user 'xlruser'
    I have done a clean uninstall of XLR on the client but the message still appears on starting the add-on
    Greig

    Check this SAP Note: 847981 Unable to connect to XLR after installation
    [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=847981]

  • Macbook Pro won't connect to internet, says ISP has failed.

    For months I have not been able to connect to my internet at home from my MacBook Pro. I have tried restarting the router many times. All of my other devices, as well as my roommates' devices connect to the internet. My wifi icon at the top says that it has connected but that the ISP has failed when I refer to the diagnostics. I've tried countless troubleshooting articles and none have worked so far. Any suggestions?

    Im going to answer my own question. Problem Fixed! After I was on the phone for over an hour with a senior advisor we found the problem was with the download or the instilation. He had me Shut Down Computer and hold down Command and R then press power button hold this down until the recovery window pops up. Then reinstall mountain lion os system. this does not wipe out documents, photos and apps like windows does. I didnt know this since Im new to MacBooks. Hopefully this may help someone else.
    PS I beleive In order to do this you need to be plugged into your router to have internet access. They had me do this. This will take about an hour but now Im up and running.

  • TS3367 My FaceTime will make the call but will not connect and will sometimes say call failed. What do i do?

    My FaceTime will make the call but will not connect and will sometimes say call failed. What do i do?

    don't update to iOS7 just yet if you prefer 6.  Many are saying that's the cure, but there are lots of iOS7 users here who can't make Facetime work either.
    It would seem Apple has either a big problem on their hands, as this is now a week old, or they don't know how to fix it.  Either way, email Apple tech support your concerns

  • Installation issues - Connection to the specified server has failed

    Hi
    i am trying to install sap server on windows 2008.my SQL server is on another box with windows 2003 and SQL 2008
    select server type drop down is blank and after entering SQL server name/user/password i am agettig this error
    "Connection to the specified server has failed"
    to make sure i have access to sql server ,i hav installed SQL 2008 native client and created one test odbc DSN to test that my serevr is talking to database server
    databse and both 2003 and 2008 machines are 64 bit
    Please help

    yes
    one thing i am noticing when i run install is i am getting this message on first screen
    so is the setup i ma running really compatible with SQL 2008?
    i am runing the setup from Patch0 because other patch downlads do not have ther server setup
    The installer detected an outdated version of MSSQL installed on this machine.
    If you are using another type of database to run SAP Business One, such as DB2 or MaxDB, press Skip.
    To upgrade your MSSQL version exit this installation. Only an experienced system administrator or DBA should upgrade the database.

Maybe you are looking for

  • SQL Developer 1.5.5 does not show partition tab

    I recently switched to SQL Developer 1.5.5 on RHEL 5.3 with Java 1.6.0_13. In 1.5.5, there is no partition tab when I view the table details. However version 1.5.4 shows the partition tab. Was this intentionally removed or is it a bug? Here's an exam

  • Unicode is not in Touchpad?

    Hello,     I am trying to access some Vietnamese webiste and I can view those webiste fine with IE9, Ipad2, Iphone but I can't view those websites with Touchpad.  All the font are mess up.  I look around on the web for answer and look like touchpad d

  • My start button doesn't work in Windows Pro 8.1

    I installed an Windows Pro 8 to 8.1 Pro x64 on a desktop computer. Both were clean installations, no other software was installed. With Window 8.1 Pro, the start button worked for a day after all the updates, then booted the computer. Now, if I try t

  • Epson Wifi Printers and Snow Leopard

    Just curious - Has anyone gotten one of the newer Epson Wifi printers (like and all in one) - to work with Snow Leopard? Something like the Epson Artisan 800? Thanks

  • ImageIO and jar Problem

    Hi! I have this problem: I want to create a jar of my application. I use JBuilder2005. I create a jar and include all the dependencies for the required libraries. But I have a problem (NullPointerException) whenever I try to read with the method Imag