JDeveloper 10g and Oracle Sequences

Hello,
i am new to Java/JDeveloper and I would like to know,
how I can use an existing oracle sequence in JDeveloper to
create a value for a field in my table.
(using JDBC, no "Toplink")
Greetings.

Hi,
you could issue a select <sequence>.nextval from dual query statement and obtain the result from the return set.
Frank

Similar Messages

About how to build dynamic maps using jdeveloper 10g and mapviewer

i follow the guidance (about how to build dynamic maps using jdeveloper 10g and oracle application server mapviewer) to write a jsp file,but error take palce ,i get information "Project: D:\jdev1012\jdev\mywork\WebMap\ViewController\ViewController.jpr
D:\jdev1012\jdev\mywork\WebMap\ViewController\public_html\WebMap.jsp
Error(12,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,190): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,102): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,28): cannot access class oracle.lbs.mapclient.MapViewer; file oracle\lbs\mapclient\MapViewer.class not found
Error(12,40): cannot access class oracle.lbs.mapclient.MapViewer; file oracle\lbs\mapclient\MapViewer.class not found
Error(13,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(13,198): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(13,106): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(14,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(14,188): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(14,101): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(15,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found
Error(15,200): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found
Error(15,107): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found"
can you help?
greetings

I found a lot of information in document 133682.1 on metalink.
step by step example how to deploy a JSP business component application.

JDeveloper 11g and Oracle XE 10g

Hi, We are beginner in JDev. and ADF and Oracle as well.. we are developing a PENSION software for an organization as an Internee ... we have a less time and our timelines are getting close ..Whenever We Insert into the database it overrides the previous record .. we are using this tutorial Developing Rich Web Applications With Oracle ADF http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_55/jdtut_11r2_55_1.html but at the end Its run and update in JDEVELOPER MODEL TESTER but cannot update in JSF page in Web browser and cant update in XE database also
we also follow instructions in these 2 blog posts
JDeveloper 11g and Oracle XE 10g and have done the commit button and have done changing its properties
please respond earlier
REGARDS

We are using JDeveloper and Xe database ( 11g R2 ) , Oracle ADF , Xe database
how have you configured your commit button : JDeveloper 11g and Oracle XE 10g
and how are you instering a row : ->> When we insert in JDEV debug app.tester it will work fine and also make changes to XE DB as well , but when we RUN app in Browser and add a field or record it will override the previous one
Edited by: 844290 on Aug 30, 2012 10:53 PM

Jdeveloper 10g with oracle 10g database

i am evaluating jdeveloper 10g with the oracle database 10g. i am trying to invoke the oracle databse results in the applet. the applet code has been compiled successfully.but when i am trying to execute the applet the error found is 'no suitable driver'.
how do i can resolve this problem.

This is not a sales forum. As I already said you should contact an Oracle sales person which can answer your question. There are possible migration paths which will save you some money (against buying all new licences).
I don't say that you have to upgrade to 12c. You can develop applications using the older technology using jdev 10g together with OAS 10g and Oracle DB 10g.
If you want to use newer technology (jsf2.0...) you have to update as these are not available in 10g. The question if you need to update to 11g or 12c (jdev) you have to answer yourself and may ask the salesperson too. 12c is the latest technology and the question is if you need the latest. 11g if the jdev version which is used internally by Oracle and is on the marked quite some time.
Timo

Integration (JDeveloper 10G and SCM 9i)

I am new working with JDeveloper and SCM.
Is it possible to integrate JDeveloper 10G to SCM 9i, or should I use the same version for both products, in order to reduce future problems?
Now I am having some problems, for example:
1) I can not move a business component from a package to another. Both packages are checked out. The BC4J is checked out, too.
2) When I try to add a new JSP to the struts file from the graphic view, I have to check out both files the strust,xml and StrutsPageFlow.oxd_struts.
3) When I delete a file it is not deleted in the repository.
Are these problems related to the version, or should I install something else?
Thanks for your help.
I am including this question in the SCM forum, too

AFAIK support for Oracle SCM is not yet implemented in JDeveloper 10g. Oracle promises to publish it on Extension Exchange (http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/index.html) as soon as it will be available. I don't expect it released anytime soon :-(
Last version of JDeveloper in which I saw that working was 9.0.3.3. Since then it's been worse and worse.
Regards Jan

What are the major differences between oracle 10g and oracle express 10g

Hi
Can anyone tell, What are the major differences between[b] oracle 10g and oracle express 10g.
Or if you know any URL, then please do let me know.
Advance Thanks
JC

Dear sir,
here it is.
http://www.oracle.com/database/product_editions.html

Difference Between Oracle Database 10g And Oracle 10g Express Edition

Can any body Tell me What is The Difference Between Oracle Database 10g And Oracle 10g Express Edition.

http://www.oracle.com/database/product_editions.html
This link might help you.

Oracle Database 10g and Oracle Client 9i together

Hi, I've been lost some nights in this problem, in my job I will need migrate my Oracle Database 10g for a new computer, on the other hand, there is a software in this computer wrote in Visual Basic and this running only Oracle 9i Client.
Is it possible configure my new server for run Oracle Database 10g and Oracle 9i Client together?
Thanks!
Emerson

You can certainly use an Oracle 9i client to connect to an Oracle 10g database. Technically, you may have to apply the 9.2.0.4 patchset to the Oracle client to be completely supported, but that may not be strictly necessary.
You can also have both a 10g database and a 9i client installed on the same machine in different Oracle Homes. You may have some issues on Windows, however, if you are using software that is not multi-home compliant (i.e. the Microsoft ODBC driver for Oracle) or if you call Oracle command-line utilities (exp, imp, etc) without explicitly setting the PATH first.
Justin

Will Oracle 10g and Oracle XE happily co-exist on same machine?

I can't seem to find anything specifically saying that Oracle 10g and Oracle XE can be installed on the same Windows machine. The only reason I'd want to do this is that I originally had the free version on my Windows machine. The uninstaller nevers seems to run a complete job and always leaves bits over. So I'd like to install Oracle 10g alongside Oracle XE.
Wondered if anybody had done this already?

to uninstall Oracle, do the following:
1. Uninstall all Oracle components using the Oracle Universal Installer (OUI).
2. Run regedit.exe and delete the HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE key. This contains registry entires for all Oracle products.
Delete any references to Oracle services left behind in the following part of the registry:
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/Ora*
It should be pretty obvious which ones relate to Oracle.
4. Reboot your machine.
5. Delete the "C:\Oracle" directory, or whatever directory is your ORACLE_BASE.
6. Delete the "C:\Program Files\Oracle" directory.
7. Empty the contents of your "c:\temp" directory.
8. Empty your recycle bin.
At this point your machine will be as clean of Oracle components as it can be.
Remember, manually editing your registry can be very destructive and force an OS reinstall so only do it as a last resort.

JDeveloper 10g and Struts Page Flow

Hello,
First of all, I'd like to congratulate JDev Team for providing us with this amazing new tool.
I am evaluating JDeveloper 10g and its Struts/Tiles integration, since we are now selecting the IDE to be used by our company in its projects.
I noted the following: In Struts Page Flow, the component pallete does not have a component do represent a Tiles definition.
I'd like to know if there are plans to include such a component, considering that this is crucial to our projects.
If not, could you please provide us with directions to do so ?
I am looking forward to your reply.
Thanks a lot !
Juarez Junior
SCPJ2/SCWCD/SCBCD
Unisys Global Outsourcing

Juarez,
You are quite correct that the visual Struts modeling does not support tiles yet. Rest assured that it's on the list of features we're working on.
What that means is that you're not going to visualise the links / submits from the tiles themselves.
However, the tiles taglib is available in the visual JSP editor so you should have no problem creating tiles content.
Likewise you can create the relevant plug-in entries for tiles by right clicking on the Struts Config node in the Structure Pane (when the struts-config or the diagram is selected) and from the new menu you'll see plug-in.
The final option is of course to edit the XML directy should you want to.

JDeveloper 10g and 9iOA side by side

Hi! is it ok if i run 10g and 9iOA side by side?
Im thinking do the UIX page/view in 10g so i can do previews and then just import the generated UIX in 9iOA. Im trying to re-design the main page of EBS 11.5.9 and currently only Jdev 9iOA is supported.

Hi,
Oracle JDeveloper does not conflict with teh Oracle Application Server if installed in its own directory structure
Frank

Failure to connect JDeveloper 10g to Oracle Database Expres Edition.

Hi, i working with Oracle JDeveloper 10.1.3 and Oracle Database 10g Express Edition. CONNECT to Oracle Database XE from Jdeveloper Wizards using JDBC/Thin, generate the next error messge:
ORA-0064: error ocurred at recursive SQL level 1.
ORA-12705:Cannot access NLS datafile or invalid environmment specified.
Vendor code: 604.
, but connect to using ODBC work Ok.
If run the application display:
17002:Exception of E/S: SO: Exception was generated.
Roberto.

Hi Roberto,
this issue can be caused by language incompatibility between JDeveloper language (client language) and database language.
To check the language of the database, execute the following SQL statement from the DB:
select * from nls_database_parameters;To check the JDeveloper language:
Select menu Help --> About in JDev, and see the values for:
user.language, user.region.
Are they the same ?
If not,
1. Edit <JDev_Home>/jdev/bin/jdev.conf file.
2. Add the following parameters:
AddVMOption -Duser.language=...
AddVMOption -Duser.region=...
with the values for language and region, f.ex. en and US respectively
3. Restart JDeveloper and re-test the connection.
Hope this helps,
Didier.

RAC and Oracle Sequences

We have a RAC running for two instances , we have noticed that one trigger on update which is using a sequences to get ids is not allocating such sequences
on sequence as expected , is every instance of RAC caching a set of sequences and the other instance have no idea about this , is this a configuration which has
to be done at RAC level

sayantan chakraborty wrote:
what is the difference between RAC and Oracle clusterware?RAC = Oracle Real Application Clusters
http://www.oracle.com/technology/products/database/clusterware/clusterware_for_unbreakable_linux_faq.html#
In the event of a system failure, clustering ensures high availability to users. Redundant hardware components, such as additional nodes, interconnect, and disks, allow the cluster to provide high availability. Such redundant hardware architectures avoid single points-of-failure and provide exceptional fault resilience.
In Oracle Real Application Clusters (RAC) environments, Oracle Clusterware monitors and manages Real Application Cluster databases. When a node in the cluster is started, all instances, listeners and services are automatically started. If an instance fails, the clusterware will automatically restart the instance, so that the service is often restored before the administrator notices it was down. In this sense Oracle Clusterware is the basis for Oracle Real Application Clusters.
In those environments RAC ensures the continuous operation of the database as well as its scalability by running more than one database instance simultaneously, typically one on every node in the cluster.
You cna
how to get RAC 10g?What did you mean?
If you mean Software:
http://www.oracle.com/technology/software/index.html
Docs:
http://www.oracle.com/technology/products/database/clustering/index.html
http://www.oracle.com/pls/db102/portal.portal_db?selected=16
Or Search on Google
http://www.google.co.th/search?rlz=1C1GGLS_thTH327TH327&sourceid=chrome&ie=UTF-8&q=Oracle+Real+Application+Cluster
Good Luck

Jdeveloper 10g and MySQL

Have any one try to connect to MySQL using Jdeveloper 10g?
Any pointers?
Thanks

I have a mysql connection and everything works good. I have the "SQL flavor" set to SQL92 and the "Type" to Java. I can create business components from the connection and test them. "SELECTS" work fine, but if I try to update or insert, I get an error stating that "Callable Statements not supported". Why on earth would it try and use a "CallableStatement" for INSERT and UPDATE statements??
Here is the full trace:
oracle.jbo.SQLStmtException: JBO-27123: SQL error during call statement preparation. Statement: UPDATE tax Tax SET tax=? WHERE TAX_ID=?
     at oracle.jbo.server.DBTransactionImpl.createCallableStatement(DBTransactionImpl.java:2725)
     at oracle.jbo.server.DBTransactionImpl2.createCallableStatement(DBTransactionImpl2.java:407)
     at oracle.jbo.server.BaseSQLBuilderImpl.doEntityDML(BaseSQLBuilderImpl.java:248)
     at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:4592)
## Detail 0 ##
java.sql.SQLException: Callable statments not supported.
     at com.mysql.jdbc.Connection.prepareCall(Connection.java:1201)
     at oracle.jbo.server.DBTransactionImpl.createCallableStatement(DBTransactionImpl.java:2690)
Any help would be appreciated.
Thanks.

Integrate JDeveloper 10g and StarTeam

Hello, my friends
How do I integrate JDeveloper 10g (10.1.2 and 10.1.3) with StarTeam 2005.
Thanks you!

You can build a simple command line interaction using the external tools menu option.
See this how-to:
http://www.oracle.com/technology/products/jdev/101/howtos/extools/subversion.html

JDeveloper 10g and Oracle Sequences

Similar Messages

Maybe you are looking for