JDeveloper 11.1.1.3.0 does not still support JSF 2.0?

I did not find it.
Edited by: user12055979 on 5-May-2010 9:22 AM

No it doesn't - we are working on it and it is planned for a future release.

Similar Messages

  • Rep. does not have support for Oracle Designer

    We're new to SCM and just useing SCM with JDeveloper.
    Sorry for newbie stupidness. Searches of this forum didn't
    turn up any hits on 21247 or other strings.
    Given: brand new install of SCM. Created a private workarea
    with RON. Attempting to use RAU to enable branching and
    versioning.
    I'm having some chicken-vs-the-egg problems. I can't
    enable branching in my shared workarea with RAU because it
    seems to want to pop up the Migration Dialogue and then
    this error occurs:
    CDR-21247: Error Cannot proceed!
    The target repository does not have support for Oracle Designer
    objects
    Any help or tip would be greatly appreciated.

    Curt,
    If you managed to create a private workarea from the RON then versioning is enabled. You would have enabled this from the RAU.
    Oracle 9i JDeveloper release candidate provides a wizard to create the workarea and private branch.
    There are now two flavours of the repository, one with Designer + file and folder support and one with just files and folder support.
    If you have no structured Designer components you do not require the Designer support to use JDeveloper with Oracle SCM.
    I suggest you try the JDeveloper wizards. The RAU also offers a menu to examine repository object state. Check that you have no invalid
    objects, they can be recompiled using the RAU.
    David

  • Camera RAW does NOT yet support raw files for the new  Canon Sureshot S95

    Camera RAW does NOT yet support raw files for the new
    Canon Sureshot S95.
    Adobe, please can you provide an update asap

    Hello!
    I think that you need to be patient.
    There has not been any release of Camera Raw since the release of the camera.
    I recommend to try the next version once it will be released, as there might be preliminary support (and therefore not listed).
    Usually, Adobe is amongs the firsts to support a new camera.
    Even though the Camera Raw team is fielded with wonderful coders, I do not think that they do have a time machine to allow support before they have their hands on a camera

  • Why does not java support raw sockets?

    Java does not have support for raw sockets, that means it cannot receive the packet header, just the payload data.
    But the header data of an ICMP packet consists of 20 bytes, and you can still write single bytes in Java, so why isn´t is possible to write a header for an ICMP packet in Java?
    Can someone explain how it all works?
    Thanks!

    You can do raw sockets with third party libraries. They won't be pure java - but you didn't really expect to do raw sockets on your cell phone or TV set top box, or spy and spoof someone's network using an applet.
    The FAQ for one such library hints what kind of a mess raw sockets are due to differences in common operating systems; see http://www.savarese.com/software/rocksaw/

  • Under Snow Leopard I used a WD My World NAS to back up my Mac Pro (Mid 2010). When I upgraded to Lion I am unable to access the backup because the NAS does not yet support AFP. I have now bought a Time Capsule and want to transfer the old backup onto it.

    Under Snow Leopard I used a WD My World NAS to back up my Mac Pro (Mid 2010). When I upgraded to Lion I am unable to access the backup because the NAS does not yet support AFP. I have now bought a Time Capsule and want to transfer the old backup onto it.
    How can I recover the NAS back up to put on my new Time Machine.
    Talking to Apple Support Adviser was a waste of time on case number 239647273
    Any thoughts or pointers?

    Keep the old OS around and just kick the tires and test new OS. Apple has a history and habit of breaking support in things like this.
    You can use TimeMachine as one level of backup, and even there there were changes with Lion, I would always recommend foremost backup clones of every volume. And clone (SuperDuper etc) can be stored on something like HP NAS Media Server which also was supporting TimeMachine, iTunes - until Apple made that harder and more their own proprietary format.
    Apple AirPort Time Capsule Support
    Lion Communities
    Cloning as a Backup Strategy
    Rather than "upgrade" I would clone the system, and do a clean install, then allow Setup Assistant to import your files.
    Others who are asking the same question:
    http://www.bing.com/search?q=mac+os+x+lion+WD+My+World+NAS

  • Target does not currently support account discovery

    What does the message "Target does not currently support account discovery" means?
    I am getting it while using OPAM REST API to get the accounts from a given resource.
    How can I make it support it?
    TIA
    Leo

    I would suggest waiting a day or two. YouTube has their standard flash format that will play on a web browser, but they also have an h.264 format that will play on the iPhone. It may take some time before they create the iPhone version. Similarly, it may take some time for YouTube to post a high def version.

  • There were no results for I've downloaded the kindle app to my new iPad4 but when I went to Amazon UK and tried to download a book it said "this mobile app does not currently support digital downloads. I don't understand! I'm in the UK.

    There were no results for I've downloaded the kindle app to my new iPad4 but when I went to Amazon UK and tried to download a book it said "this mobile app does not currently support digital downloads. I don't understand! I was told you could download kindle books from amazon straight to iPad if you download the kindle app first. Do I have to do it onto my computer and then sync it onto iPad? surely not?

    Can you go here:
    http://www.amazon.co.uk/Kindle-eBooks/b/ref=amb_link_173148087_8?ie=UTF8&nav_sdd =aps&node=341689031&pf_rd_m=A3P5ROKL5A1OLE&pf_rd_s=center-1&pf_rd_r=1GDPPW8ZCN9Y 9NQF5VV0&pf_rd_t=101&pf_rd_p=365751407&pf_rd_i=468294
    and not log on. See what you can do.

  • Movement type 647 does not currently support serial numbers  management

    we can't do "shipment start/PGI for DOWN shipment 1178184 DN# 40309339.
    Error message " Movement type 647 does not currently support serial numbers  management" see also attachment
    Error is like that
    Stop : Save Shipment
      Stop : Shipment 0001178184 :Action for Shipment start
    Read Activities profile ZPGI
    Main issue
    Stop: Movement type 647 does not currentely support serial number management.
    Delivery 001114455 in shipment could not be posted GI
    Ssome problem with the movement type 647. 
    what I understand is, its a SD movement which place the material in transit and automatically executes
    the 101 movement. If possible please help in this matter.
    Pls help what exactly issue and resolution .
    Regards
    Vicky

    Check this thread
    [STO with delivery in 1 step (mvt. type 647) with serial numbering   |STO with delivery in 1 step (mvt. type 647) with serial numbering]
    thanks
    G. Lakshmipathi

  • Movement type 101 does not currently support

    Dear Experts
    there is an error occur at the Time of MB31 with 101 Movement type
    Movement type 101 does not currently support serial number Management.
    Rgds
    Pankaj

    Hi
    Serialization config is missing for 101.
    Check in below config
    spro>plant maintenance & customer service>master data in plant maintenance & customer service->technical objects>serial number management-->define serialization attributes for movement types
    Check with the help of PM or CS consultant
    Regards
    Antony

  • Movement type 101 does not currently support serial

    Hi experts,
    I'm trying to realize MIGO for a PO with a material with serial number.
    The error msg is " Movement type 101 does not currently support serial number Management." IO306
    I already config. spro>plant maintenance & customer service>master data in plant maintenance & customer service->technical objects>serial number management-->define serialization attributes for movement types
    And
    Plant Maintenance and Customer Service -->Master Data in Plant Maintenance and Customer Service -->Technical Objects --Serial Number Management -->Define Serialization Attributes for Movement Types
    And assigned the material to attributes ate MM02.
    I have know ideia what else i have to do.
    Is there anone here already see that?
    Tks
    Antonio Oliveira

    try posting GR via MB01 transaction instead of MIGO and let us know if you are getting same issue.
    also there are few OSS notes created for this kind of issue which has to do with maintainenance of table V_T156SY, check below thread
    Movement type 101 does not currently support
    yogesh

  • Movement type 317 does not currently support serial number management

    Movement type 317 - support serial number management?
    We are using SAP ECC 6.0. and trying to create a structured material from constituent components with the WM 317. The components are using serial numbers. When we try to post the material document we get an error message:
    u201CMovement type 317 does not currently support Serial number managementu201D
    Movement type 317 does not currently support serial number management
    Message no. IO306
    Diagnosis
    With the help of * under the business operation, the entry in table T156S used here under movement type 317 defines that no serial numbers are supported here.
    System Response
    Termination of the transaction called up.
    Is any new availability which support serial number management in warehouse movement 317?

    Is the scenario relates to Retail ??  Movement Type 317 is used for Creation of a structured material from constituent components (Retail).  Check Note 131969 - Recommendation: Store returns in SAP Retail Release 4.0
    thanks
    G. Lakshmipathi

  • Movement type 124 does not currently support serial number management

    Movement type 124 does not currently support serial number management
    when I post goods return in qa12, the system shows movement type 124 doesn't support serial number.
    Could anyone can tell me where I can set the movement type for serial number?
    John

    Unfortunately it is impossible to post a return delivery from the usage-decision for a material with serial number profile, which is in goods receipt blocked stock. This is is missing functionality
    The possibility in the standard would be the following :
    1. Close the inspection lot. Please do the stock-posting in a way, that    you post to 'GR blocked stock'. Remark : No physical is   done. This is only necessary to achieve, that status SPCO is set.
    2. Post the reutrn delivery with the MM-IM-transaction (e.g. MIGO).
    Please check, if this is possible.

  • Macintosh Does Not Have Supported Superdrive

    I have an eMac that came with a Superdrive from 2002. The only thing I did recently was upgrade to the most recent version of iTunes. I have been having problems burning DVDs.
    I ran ONYX. It worked.
    I then had problems.
    I ran Onyx again and it didn't help. I burned to an external drive with 101 GB of space it worked.
    I tried to burn again on the same drive and I got told MACINTOSH DOES NOT HAVE SUPPORTED SUPERDRIVE.
    Is there a setting I haven't checked on.
    Could the new iTunes be causing this problem.
    Any help troubleshooting would be great.
    Evan Jacobs

    Sue
    First of all thank you so much for the response. I have downloaded the doc (below) you suggest and am about to carefully read it to see if I can figure out what is going on.
    Read this:
    SuperDrive: Important Information About Using With
    High-Speed Media
    http://docs.info.apple.com/article.html?artnum=86130
    Also, are you really running 10.2.x ? X = what?
    Second, I am running an iMac Version 10.2.8 At least that is what it says in the About this Mac menu. Actually, it says Version 10.2.8 Processor: 800 MHz PowerPC G4
    I got this whole set up in May 2002 , have done periodic updates and had absolutely no trouble burning DVDs until the past six months. That's when I used a no-name batch of printable DVDs. It's my first shot at printables. (The music CDs I've printed look terrific & play fine.) The DVD projects are turning out to be a pain, however. I thought the problem was the DVDs.
    I did go into the console log via the System Profiler. Found this info regarding the failed burn:
    iDVD: Burning to PIONEER DVD-RW DVR-104 A227 via ATAP1.
    iDVD: Requested burn speed was max, actual burn speed is 7x.
    iDVD: Burn started, Mon Jan 30 23:47:28 2006
    iDVD: Burn underrun protection is supported, and enabled.
    iDVD: Write (10), block: 800, count:32 ->3/11/05 Medium Error, L-EC uncorrectable error
    iDVD: Burn failed, Mon Jan 30 23:47:56 2006
    iDVD: Burn sense: 3/11/05 Medium Error, L-EC uncorrectable error
    iDVD: Burn error: 0x80020060 The device drained its butter without burn underrun protection.
    It's mostly Greek to me except that the burn failed. (That it did!)
    I appreciate your help. I try hard to understand this stuff, but lately I seem to spend more time sorting out techie issues than editing.
    Lee

  • Does SAP still supports WCEM or it only supports Hybris?

    Dear Experts,
    Does SAP still supports WCEM or it only supports Hybris?
    If we are going for new implementation on Web channel for one of our client, does SAP supports this or will it suggest for Hybris?
    Best regards,
    VZAY

    Hello,
    BPC 10 does not support SQL 2014 yet. It will in a future SP release but that is still tentative. BPC 10.1 SP02 is scheduled to support it but that too is tentative as well.
    You may want to review SAP KB-1486745 - Does BPC support SQL Server
    Developer Edition? 
    Thanks,
    April

  • Does Adobe still support Adobe Photoshop Elements 12 & Adobe Premiere Elements 12?

    Does Adobe still support Adobe Photoshop Elements 12 & Adobe Premiere Elements 12?

    No, but then they never do support PSE very much. What's the problem?

Maybe you are looking for

  • Is it possible to trap the user's COMMIT and do something?

    I need to do some actions when a user (actually a program that I can't access) performs COMMIT and close the session. My functionality is activated from triggers. I keep many variable in package. Before a session ends I need to do some final steps us

  • How to get the current tree element (node/childnode/childnode/...) ?

    Hello! I'm trying to create a kind of a navigation tree for my application. It should represent some elements of an XML structure and some other nodes for other options. The binding with the context is not a problem, I can create the tree up to all t

  • Vista Photo Gallery Keywords & LR Tricksey

    Assuming that LR 1 handles keywords the same way Beta 4.1 (Should I?), then separating two keywords with a forward slant bar in LR makes a "sub keyword" (What's the correct term for that?)in Photo Gallery. while separating them with a comma just adds

  • Can additional Canon EOS picture styles be added to Lightroom 3.6?

    Additional picture styles such as Twilight, Autumn Hues and Studio Portrait can be added to Canon EOS cameras using the User Defined slots.  They can be downloaded from http://web.canon.jp/imaging/picturestyle/file/index.html Can these be added to th

  • Safari vs. Internet Explorer: Icon previews

    Hi there, My friend just switched from Internet Explorer to Safari, and although he loves Safari, there is one major feature that he misses (and now, I realize that I miss this feature as well!): Whenever he drags-and-drops an image from a website on