JDK and JRE comptability for Windows server 2008

Hi,
Could someone please let me know what are the JDK and JRE versions that are comptabile with Windows server 2008 ?
Thanks.

Hi,
For security purposes, the IP address for the Windows Update web site constantly changes and it is not a fixed address. Also, there is no official publication of the
IP addresses. We normally advise against defining IP addresses on the firewall for this purpose. Instead, we suggest either allowing all outbound connections to http & https ports or defining the DNS addresses as permitted destinations for traffic via
the firewall.
For up-to-date information about the IP's being used by Windows Update, use the DNS system, as this is the only reliable up to date source of information. If you use
DNS, make sure the following destination hosts are specified:
http://windowsupdate.microsoft.com
http://*.windowsupdate.microsoft.com
https://*.windowsupdate.microsoft.com
http://*.update.microsoft.com
https://*.update.microsoft.com
http://*.windowsupdate.com
http://download.windowsupdate.com
http://download.microsoft.com
http://*.download.windowsupdate.com
http://wustat.windows.com
http://ntservicepack.microsoft.com
http://stats.microsoft.com
https://stats.microsoft.com
Thanks for your understanding.
Best Regards,
Nina
This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

  • Oracle Forms and Reports 10gR2 for Windows Server 2008 (64bit)

    Hi!
    I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine. But I cannot find the installer of it. Is there a way to do it?
    Thanks...

    I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine.Be aware that Oracle Forms and Reports 10gR2 (AS 10.1.2.0.2) is not certified for windows server 2008, as from Oracle Certification Matrices

  • HP Pavilion p7-1451 USB 3.0 and Bluetooth drivers for Windows Server 2008 R2

    I bought an HP Pavilion p7-1451 so I could have an affordable, yet reasonably powerful machine to put a server software development environment on (I'm a software engineer).
    It came with Windows 8, but I needed Windows Server 2008 R2, which I own through an MSDN subscription.  I did what I always do in these cases, re-partioned the hard drive, re-formatted, and installed the new operating system.
    I have nearly all devices working properly, but it still won't recognize the USB 3.0 ports and the Bluetooth device.  I searched everywhere but cannot find anything that will work.  Anything from the HP site is targeted for either Windows 7 or 8, and when trying either one of those, it tells me "Your system does not meet the operating system requirements"  and MSI does not publish any drivers at all for this particular motherboard (that I can find anyway).
    Motherboard:  MSI MS-7778  also known as: MSI 2AEO version 1.0
    BIOS:  AMI 8.12
    This is the list of "Other devices" in Device Manager that Windows doesn't recognize:
        BCM20702A0
        Universal Serial Bus (USB) Controller
        Universal Serial Bus (USB) Controller
    Bluetooth Device ID:  USB\VID_0A5C&PID_21F1&REV_0012
    USB Controller device ID:  PCI\VEN_1022&DEV_7812&SUBSYS_2AE0103C&REV_03
    Windows still doesn't recognize them after allowing it to search the internet.
    And I've googled all over the place and I'm not getting anywhere.
    Does anyone have any advice?
    Any chance this could be related to the BIOS?
    I'm not having any luck finding a BIOS download for this motherboard either.
    Any help is much appreciated!
    This question was solved.
    View Solution.

    Holy crap, it worked!!
    My version number was slightly different in the .inf files, but I dropped the last ".1" off the end and that did the trick!
    So, the steps were:
    Get and extract the driver files:
    1. Download the AMD Chipset Drivers file from here:
          http://support.amd.com/us/gpudownload/windows/Pages/raid_windows.aspx#2
          (choose the first download in the list.  It's called "AMD Chipset Drivers")
    2. Download and install 7-Zip from here:
          http://7-zip.org/download.html
    3.  Right click the  13-4_vista_win7_win8_32-64_sb.exe  chipset file, select "7-Zip", then choose "Extract Here"
    Install the USB Host Controller driver:
    1. Open the USB Controller .inf file in Notepad from the following location:
        13-4_vista_win7_win8_32-64_sb\Packages\Drivers\SBDrv\hseries\USB30\amdxhc\W764A\amdxhc.inf
    2. Find all instances of:  .5.1.1   and replace with:  .5.1
         and save and close the file.
    3. In Device Manager, right click the first unknown "Universal Serial Bus (USB) Controller" and choose "Update Driver Software..."
    4. Choose "Browse my computer for driver software", navigate to the directory in Step 1, and click Next.
    5. Accept any warnings and choose to Install anyway...
    It should recognize and install the USB Controller driver (finally progress!)
    Repeat the same steps above for any other USB 3.0 controllers that are unrecognized.
    The devices should now say "Unknown device" instead of "Universal Serial Bus (USB) Controller".
    Windows recognizes your controllers now, but not the USB root hubs.
    For each of those "Unknown device" entries, do this to install the USB 3.0 Root Hub:
    1. Open the USB Hub .inf file in Notepad from the following location: (notice that it's a different directory)
        13-4_vista_win7_win8_32-64_sb\Packages\Drivers\SBDrv\hseries\USB30\amdhub\W764A\amdhub30.inf
    2. Find all instances of:  .5.1.1   and replace with:  .5.1
         and save and close the file.
    3. In Device Manager, right click the first "Unknown device" and choose "Update Driver Software..."
    4. Choose "Browse my computer for driver software", navigate to the directory in Step 1, and click Next.
    5. Accept any warnings and choose to Install anyway...
    I plugged in a USB 3.0 hard drive, and at first it didn't seem to work.  I tried another port and still nothin.  But after about 40 seconds the drive was recognized and all is well.  Yay!
    Thank you Paul for your help!
    Hopefully this post will help others too.
    USB 3.0 on a fresh install of Windows Server 2008 R2.
    That was easy.  :-P

  • Do we need CALS for windows server 2008 R2 and 2012 R2 if 2008 R2 is just a stepping stone?

    We currently have a server on Windows Server 2008 RC SP2 64-bit with approximately 20 clients.
    We want to upgrade to Windows server 2012 R2 but first need to upgrade to Windows 2008 R2 to allow us to do a straight upgrade.
    Is it possible to upgrade to Windows Server 2008 R2 with the 5 CAL's included and then upgradeto 2012 R2 and install 20 new CAL's and keep all users accounts and domain PC's the same? 

    Ok sorry for using the wrong terminology... I was under the impression for each client (Computer) connecting to the server we will need a CAL (Client Activation License) in order for the computer to be a domain PC on the server. Do I need 20 CALS's
    for Windows Server 2008 R2 and then another for Windows Server 2012 R2 if we are only upgrading to 2008 R2 to be able to upgrade to 2012 R2 without having to do a clean install.
    For WindowsServer (Standard edition or Enterprise edition or DataCenter edition), a Client Access License (CAL) is required for each device (if you're using the per-Device CAL licensing method), or, is required for each user (if you're using the per-User
    CAL licensing method).
    (whether you use per-Device, or per-User, is up to you, it comes down to cost).
    CALs are version-specific (to a point) - i.e. if you purchased WS2008 CALs for your 20 devices, for use with your WS2008 server, and you are now upgrading that server to WS2012, you need to upgrade your CALs.
    If you are adding a second server which is WS2012, and you are keeping your WS2008 server, you need to upgrade your CALs (because you only purchased WS2008 CALs which don't grant you the rights to connect to the newer server).
    If you were to install your second server as WS2008, you wouldn't need to purchase additional CALs, because as long as the version is the same, a single CAL grant you access to unlimited server (of the same version).
    CALs can be tricky to correctly license.
    Here's some introductory reading:
    http://www.microsoft.com/licensing/about-licensing/client-access-license.aspx#tab=1
    And, none of this relates to the technical aspects of product installation/configuration at all (e.g. clean install vs. upgrade).
    Windows Server CALs are not license keys/tokens/files which you install/load/download - Windows Server CALs are quite literally paper-based (just like a drivers license or car registration). You are required to have them, to be correctly licensed, but, you
    don't physically do anything with them to own/drive a car.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Mouse not working in Virtual machine (win2k3 32 and 64 bit) on Windows Server 2008 RC1 With Hyper-V Technologies

    I have installed two virtual machines(win2k3 32bit and win2k3 64bit ) on Windows Server 2008 RC1 With Hyper-V Technologies (Beta) enterprise. Mouse is getting lost inside VM (using CTRL+ ATL +  LEFT ARROW  comes mouse control control in host OS).
    Is there any setting to make mouse works? Insert Integration Serice setup Disk operation succeeds.

     all credits for mike_something
    The problem is that the old mousedriver is hooked to the mouse device class.
    To remove this dependency, go into the registry and navigate to the key
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E96F-E325-11CE-BFC1-08002BE10318}
    Remove the value msvmmouf from the UpperFilters Regvalue.
    Reboot....
    tadaaa!!
    If you wish you can take out the drivers completely by deleting these registry hives completely :
    The driver:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\msvmmouf
    The Service:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\VPCMap
    The CopyHook Shell Extension: ( for folder access )
    HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{30C14BA C-122C-42ED-B319-1139DBF48EB8}\InProcServer32
    HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandle rs\VPCCopyHook
    After a reboot you can delete the "Virtual Machine Additions" folder from program files...
    Good Luck!

  • Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

    Dear All Precious Friends,
    I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
    I have already installed Oracle Database 11g Release 2 -------
    ----Then i configured JAVA Access bridge
    --------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
    -----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
    ..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
    -----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
    Please help my Oracle Friends
    Your early help will be highly appreciated.
    thanks and regards
    Hassan

    You said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
    In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
    First look for this link then drill into it:
    Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
    In this section you will find the following:
    This is the full product installation of FMw 11 Release 2 (Forms & Reports)
    Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
    This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
    Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
    Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
    Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
    Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
    This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6.  This is NOT a full product installation - just a patch
    Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
    There are no patch sets for Release 2 as of yet.

  • Upgrade Oracle 11.1.0.6.0 x64 to Oracle 11.1.0.7.0 for Windows Server 2008

    Hi,
    I am a little confused because I have Windows Server 2008 64 bit operating system and had installed Oracle 11g 11.1.0.6.0 (x64) prior to the Oracle 11g 11.1.0.7.0 for Windows Server 2008 install package becoming available.
    My database needs no backup of data as it is a fresh installation so its removal is not a problem.
    To now upgrade to Oracle 11g 11.1.0.7.0 for Windows Server 2008 do I need to
    a) Uninstall Oracle 11.1.0.6.0 (x64) and then install Oracle 11.1.0.7.0 on Windows Server 2008
    or
    b) Apply patch 6890831 (will this upgrade from 11.1.0.6.0 x64 to 11.1.0.7.0 for Windows Server 2008?)
    Any help much appreciated as having looked at documentation I am still confused what I need to do.
    Thanks.

    Duplicate post
    Upgrade Oracle 11.1.0.6.0 x64 to Oracle 11.1.0.7.0 for Windows Server 2008
    Please continue with other thread.

  • How to download oracle patch set 10.2.0.5  for Windows server 2008 R2

    I need  download and install oracle patch set 10.2.0.5 and install  for Windows server 2008 R2 (notes 1486772).
    But I  get message "Download basket request for update has been processed. Unable to add 1 new object(s). The objects are already part of Export and to be processed."
    Help me, please!

    Hi,
    Have you looked at this location https://service.sap.com/oracle-download ?
    Refer SAP Note 871735 - Current patch set for Oracle 10.2.0 -> Oracle patch set 10.2.0.5
    Once you add the Patchset 10.2.0.5 in download basket, you will find the same in Export tab of Download Basket. You will have to get the approval from SAP Export department by raising OSS message with XX-SER-SWFL-EXPORT component. After getting approval for the same from SAP Export dept., then & then only you will able to download it.
    Regards,
    Bhavik G. Shroff

  • Performance Tuning Guidelines for Windows Server 2008 R2 mistake?

    Hi all,
    I'm reading the "Performance Tuning Guidelines for Windows Server 2008 R2" and I think there is same kind of error. At page 53 there is a sub chapter "I/O Priorities" that explain how to handle I/O priorities.
    In the guide it is said that in the registry I have to have a key:
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\DeviceClasses\{Device GUID}\DeviceParameters\Classpnp\
    Where {Device GUID} I think it is the value I get in device manager under one of my disks -> properties -> details -> "Device Class GUID"
    the trouble is that under the key HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\DeviceClasses\ I've no subkey matching my disk's device class guid! Maybe I'm drunk but I've checked every sub key under HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\DeviceClasses\
    but neither of them as a subkey named "DeviceParameter"!!
    So am I wrong? 

    Hi Andrea,
    To find the "DeviceParameter", please try to follow the steps below:
    1.Find this registry key and note the DeviceInstance value:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\DeviceClasses\
    2.Find the device instance registry key under "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum" which contains information about the devices on the system and get the device interface GUID:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\<hardware id>\<instance id>\Device Parameters
    I hope this helps.

  • What are the netsh cmd line for windows server 2008,2012 ?

    Hi
        I am try to config ip,subnet,gateway,preferred and secondary dns using netsh for windows server 2008,2012,
    Before Netsh cmd support for all os including Win 8,win 8.1.
    I need to config form client machine to server machine using netsh cmd lines,i will try in remote login also like i will give server name,username and password with netsh cmd.Below is sample cmd line,using process i will change ip config.
    netsh -r Admin-pc -u admin-pc\administrator -p XXXXX interface ip set address name="Local Area Connection" Static 192.168.0.60 255.255.255.0 192.168.0.1
    when i run in windows server using cmd prompt it show error like "some commands line not found in specified file"
    This is my code in asp.net using vb
     Dim pip As New Process()
            Dim pipa As New ProcessStartInfo("netsh -r Admin-pc -u admin-pc\administrator -p XXXXX interface ip set address name="Local Area Connection" Static 192.168.0.60 255.255.255.0 192.168.0.1")
            pip.StartInfo = pipa
            pip.StartInfo.UseShellExecute = False
            pip.StartInfo.RedirectStandardOutput = True
            pip.Start()
            pip.WaitForExit()
    And if change  ip,subnet and default gateway,internet not work,if i change preferred and secondary dns then only internet work and can browse.
    I can change ip,subnet,gateway,both dns is some other way,below is the link
    http://www.codeproject.com/Questions/795642/How-to-change-IP-Subnet-Gateway-DNS-Prefers-and-al?arn=0
    but what problem is if server is logoff,changes not reflect in server machine,may be it logoff.
    So i need is if server is logoff,need to change ip,subnet,gateway and both dns using netsh or some other vb codings in asp,net.I am try to change ip address form client machine also.
    Pls reply asap
     Regards
         Aravind 

    For the shell scripting I'd try them here.
    Scripting forum on MSDN
    Scripting Guys forum on TechNet
    For the asp.net I'd ask over here.
    Microsoft ASP.Net forums
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Issue Installing SP2 for Windows Server 2008 SP1

    Hello, I have a very annoying issue, and I hope someone can help a bro out.
    Server: Windows Server 2008 SP1 64-bit
    Issue: SP2 wont install on Windows Server 2008 SP1
    This is what I am seeing when I check the event viewer:
    1. (Information) Windows Servicing is setting package KB948465(Service Pack) state to Staging(Staging)
    2. (Error) Windows Servicing failed to complete the process of changing update 948465-382_neutral_GDR from package KB948465(Service Pack) into Staging(Staging) state
    I have no idea why this is coming up, nor why the server cant fix the issue, but now I am forced to deal with it. So if anyone has any helpful tips it would be greatly appreciated. 
    What I have done so far:
    I have downloaded the standalone SP2 file from microsoft, and tried to install, still failed. Just sent me to the prereq page, which is pretty useless considering the fact I already have SP1 installed, and nothing new has changed physically or digitally
    in the system.
    Also, although not a huge issue, I also have a security update that is failing, basically with the same issue as the SP. Below is its Error event log.
    (Error) Windows Servicing failed to complete the process of changing update 974318-11_neutral_LDR from package KB974318(Security Update) into Staging(Staging) state
    Im hoping that upon discovering the SP issue, I can resolve the security update issue, as the errors have the same issue(failed to complete staging state).Thank you for your time.
    ~I will provide any further info if needed.

    Thank you for pointing me in the right direction Milos. Yes I ALWAYS google my issues before going on forums for help. And to no avail. However, below is the relevant info(sorry I did not post this the first time;first time dealing with an issue like this,
    so I wasnt for shore what relevant data pertained to this issue):
    I also did not copy and paste the entire log in here(obviously) because its huge, however I will post link to full file if requested/needed, but hopefully I grabbed the entire log for my SP2 update failure issue. All I can grab from this log is that the
    CBS failed. However, I have no clue where to go after that..
    WindowsUpdate.log:
    2015-02-22 19:24:15:093
    940 d10
    AU AU initiated download, updateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}.107, callId = {2AFDE80E-EFBF-40A6-861B-32400AC5493B}
    2015-02-22 19:24:15:093
    940 d10
    AU Setting AU scheduled install time to 2015-02-23 08:00:00
    2015-02-22 19:24:15:106
    940 1538
    DnldMgr *************
    2015-02-22 19:24:15:107
    940 1538
    DnldMgr ** START **  DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
    2015-02-22 19:24:15:107
    940 1538
    DnldMgr *********
    2015-02-22 19:24:15:107
    940 1538
    DnldMgr  * Call ID = {2AFDE80E-EFBF-40A6-861B-32400AC5493B}
    2015-02-22 19:24:15:107
    940 1538
    DnldMgr  * Priority = 1, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
    2015-02-22 19:24:15:107
    940 1538
    DnldMgr  * Updates to download = 1
    2015-02-22 19:24:15:107
    940 1538
    Agent  *   Title = Windows Server 2008 Service Pack 2 for x64-based Systems (KB948465)
    2015-02-22 19:24:15:108
    940 1538
    Agent  *   UpdateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}.107
    2015-02-22 19:24:15:108
    940 1538
    Agent  *     Bundles 2 updates:
    2015-02-22 19:24:15:108
    940 1538
    Agent  *       {A34F6A47-5AB9-44CB-AB3F-9FC64F7B903C}.107
    2015-02-22 19:24:15:108
    940 1538
    Agent  *       {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107
    2015-02-22 19:24:15:108
    940 1538
    DnldMgr ***********  DnldMgr: Regulation Refresh [Svc: {9482F4B4-E343-43B6-B170-9A65BC822C77}]  ***********
    2015-02-22 19:24:15:108
    940 1538
    DnldMgr Contacting regulation server for 2 updates.
    2015-02-22 19:24:15:109
    940 1538
    Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
    2015-02-22 19:24:15:119
    940 1538
    Misc Microsoft signed: Yes
    2015-02-22 19:24:15:123
    940 1538
    Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
    2015-02-22 19:24:15:131
    940 1538
    Misc Microsoft signed: Yes
    2015-02-22 19:24:15:134
    940 1538
    DnldMgr Regulation server path: https://www.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx.
    2015-02-22 19:24:15:135
    940 d10
    AU  # Pending download calls = 1
    2015-02-22 19:24:15:135
    940 d10
    AU <<## SUBMITTED ## AU: Download updates
    2015-02-22 19:24:15:644
    940 1538
    DnldMgr  * Regulation call complete. 0x00000000
    2015-02-22 19:24:15:661
    940 1538
    DnldMgr ***********  DnldMgr: New download job [UpdateId = {A34F6A47-5AB9-44CB-AB3F-9FC64F7B903C}.107]  ***********
    2015-02-22 19:24:15:732
    940 1538
    DnldMgr  * All files for update were already downloaded and are valid.
    2015-02-22 19:24:15:732
    940 1538
    DnldMgr ***********  DnldMgr: New download job [UpdateId = {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107]  ***********
    2015-02-22 19:24:15:733
    940 1538
    DnldMgr  * Queueing update for download handler request generation.
    2015-02-22 19:24:15:733
    940 1538
    DnldMgr Generating download request for update {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107
    2015-02-22 19:24:16:095
    940 1538
    Handler Generating request for CBS update 77DBCA97-29DC-42BA-9DB2-03C7B4D262D4 in sandbox C:\Windows\SoftwareDistribution\Download\2c728f96f2387c9d64aed5c97088b631
    2015-02-22 19:24:16:095
    940 1538
    Handler Selected payload type is ptExpress
    2015-02-22 19:24:16:124
    940 1538
    Handler UH: DpxRestoreJob returned 0x80070002
    2015-02-22 19:24:16:124
    940 1538
    Handler Detected download state is dsHavePackage
    2015-02-22 19:25:32:077
    940 dcc
    AU AU received policy change subscription event
    2015-02-22 19:26:21:898
    940 d40
    Handler FATAL: CBS called Error with 0x80070002, 
    2015-02-22 19:26:21:899
    940 1538
    Handler FATAL: UH: 0x80070002: Async stage operation failed in CUHCbsHandler::StageCbsPackage
    2015-02-22 19:26:21:909
    940 1538
    Handler FATAL: Request generation for CBS update complete with hr=0x80070002 and pfResetSandbox=0 
    2015-02-22 19:26:21:909
    940 1538
    Handler FATAL: Error source is 106.
    2015-02-22 19:26:21:909
    940 1538
    DnldMgr FATAL: DM:CAgentDownloadManager::GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x80070002.
    2015-02-22 19:26:21:909
    940 1538
    DnldMgr Error 0x80070002 occurred while downloading update; notifying dependent calls.
    2015-02-22 19:26:35:006
    940 1538
    Agent *********
    2015-02-22 19:26:35:006
    940 d10
    AU >>##  RESUMED  ## AU: Download update [UpdateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}]
    2015-02-22 19:26:35:007
    940 1538
    Agent **  END  **  Agent: Downloading updates [CallerId = AutomaticUpdates]
    2015-02-22 19:26:35:007
    940 d10
    AU  # WARNING: Download failed, error = 0x80070002
    2015-02-22 19:26:35:007
    940 1538
    Agent *************
    2015-02-22 19:26:35:007
    940 d10
    AU #########
    2015-02-22 19:26:35:007
    940 1538
    Report REPORT EVENT: {3C6B2054-CE6F-4A29-9E94-D44AB5C4963F}
    2015-02-22 19:24:15:004-0500 1
    147 101
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdates
    Success Software Synchronization
    Windows Update Client successfully detected 2 updates.
    2015-02-22 19:26:35:008
    940 d10
    AU ##  END  ##  AU: Download updates
    2015-02-22 19:26:35:008
    940 d10
    AU #############
    2015-02-22 19:26:35:008
    940 d10
    AU Setting AU scheduled install time to 2015-02-23 08:00:00
    2015-02-22 19:26:35:008
    940 1538
    Report CWERReporter finishing event handling. (00000000)
    2015-02-22 19:26:35:009
    940 1538
    Report REPORT EVENT: {85DD7E1D-0632-44FF-81F3-34E75B954869}
    2015-02-22 19:26:22:129-0500 1
    161 106
    {D0ABB478-FFD1-448A-9058-939C0B427AD4}
    107 80070002
    AutomaticUpdates Failure
    Content Download Error: Download failed.
    2015-02-22 19:26:35:181
    940 1538
    Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
    2015-02-22 19:26:35:181
    940 1538
    Report WER Report sent: 7.4.7600.226 0x80070002 D0ABB478-FFD1-448A-9058-939C0B427AD4 Download 106 Unmanaged
    2015-02-22 19:26:35:182
    940 1538
    Report CWERReporter finishing event handling. (00000000)
    2015-02-22 19:26:40:009
    940 1538
    Report REPORT EVENT: {E88B7854-8974-46BE-B243-143ED103C6FF}
    2015-02-22 19:26:35:009-0500 1
    188 102
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdates
    Success Content Install
    Installation Ready: The following updates are downloaded and ready for installation. This computer is currently scheduled to install these updates on ‎Monday, ‎February ‎23, ‎2015 at 3:00 AM:  - Security Update for Windows Server 2008 x64 Edition
    (KB2507618)
    2015-02-22 19:26:40:009
    940 1538
    Report CWERReporter finishing event handling. (00000000)

  • Management Pack for Windows Server 2008 Enterprise SP1

    Hello,
    I tried to manage the performance of a Windows Server 2008 Enterprise SP1 (6.0.6001) but SCOM 2007 R2 just check the availability with a ping status.
    I have installed the normal management packs:
    On the same SCOM, I have servers with Windows Server 2008 R2 and they work perfect.
    What can I do?

    Hi Journey Tinoco,
    Performance can be monitored by using the active alerts TAB where a alert / alerts will be triggered based on the default management pack which you have installed / imported or if you have created a custom monitor based on your preference on what performance
    counter you want to monitor on windows server 2008 servers VIA SCOM.
    Or you can pull server performance report specific for Windows server 2008 from the reporting TAB as per the below screen shot for details.
    The one which you are opened is the health explorer view which is not showing much details.
    Go to reporting TAB ===> Select Windows server 2008 operating system monitoring and then What ever appropriate report you need to pull based on your requirement. For example i have pulled a report below for "Operating system performance.
    Over here Click object and select the computer name and the icon should be a Windows serve / Computer as per the icon in my screen shot below. Select the time and date from and to the report you want and dont touch the add object option. Once done click
    the Run button on the left to you will get the report as below.
    Please note: If the below report is what you are looking for is not available in your SCOM's  reporting TAB. Then you have not installed the reporting Management pack for Windows server 2008 monitoring. Download
    it from the below link.
    http://www.microsoft.com/en-in/download/details.aspx?id=9296
    Hope this helps you.
    Gautam.75801

  • Oracle db 11gR2 for windows server 2008(64 bit)

    Hi,
    i want to download the Oracle DB 11gR2 installable for windows server 2008(64 bit), but i am unable to find it in e-delivery or anywhere else in oracle website.
    Please let me know if this installation is possible or not and the link from where i can download the installer.
    Thanks in advance.

    Hi;
    All related information cover at below notes:
    Statement of Direction: Oracle Database 11g Release 2 – Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
    Release Schedule of Current Database Releases [ID 742060.1]
    Database 11g Release 2 Certification Highlights [ID 1065024.1]
    Regard
    Helios

  • Office Jet pro 8610 for windows server 2008 R2

    I have the new Office Jet pro 8610 prither but dosn't have the driver for "Windows Server 2008 R2 Enterprise" 64 Bit.
    What to do now. Can you please provide ?
    Thanks in advance.
    This question was solved.
    View Solution.

    Hi,
    The same driver as provided for any Windows OS as Windows 7 or 8 should be used, the installation however should be launch via the command line and not as a standard installation.
    Follow these steps to install the printer software on a server:
    http://support.hp.com/us-en/product/HP-Officejet-Pro-8610-e-All-in-One-Printer/5367603/model/5367606...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Microsoft support for Windows Server 2008 R2 on vSphere 5.5

    Hi, everybody.
    I'm checking if Microsoft will provide support for Windows Server 2008 R2 running on a VM on vSphere 5.5 Update 2. So far what I've found at
    http://windowsservercatalog.com is:
    Filtering vendor VMware and Windows Server 2008 R2, it shows vSphere up to version 5.0 update 1
    http://www.windowsservercatalog.com/results.aspx?&chtext=&cstext=&csttext=&chbtext=&bCatID=1521&cpID=2274&avc=34&ava=0&avq=0&OR=1&PGS=25&ready=0
    http://www.windowsservercatalog.com/item.aspx?idItem=c92e5cbd-9690-b62a-2ace-843390ac3ea4&bCatID=1521
    Filtering vendor VMware it shows vSphere 5.5 update 2, but details only Windows Server 2012, not Windows Server 2008 R2.
    http://www.windowsservercatalog.com/results.aspx?&chtext=&cstext=&csttext=&chbtext=&bCatID=1521&cpID=2274&avc=0&ava=0&avq=0&OR=1&PGS=25&ready=0&PG=2
    http://www.windowsservercatalog.com/item.aspx?idItem=ef39c5b2-2f5b-5b73-08e2-c07fecdadcff&bCatID=1521
    Does that mean Microsoft doesn't support Windows 2008 R2 on vSphere 5.5 update 2?
    I'm aware Windows Server 2008 R2 lifecycle is close to EOL, but customer requires this specific version for application compatibility.
    Thanks

    Hi mdgrkb,
    Products that have passed the SVVP requirements for Windows Server 2012 R2 are considered supported on Windows Server 2012, Windows Server 2008 R2, Windows Server 2008, and
    Windows Server 2003 SP2 and later Service Packs, both x86 and x64.
    Look this website the top left additional information:
    http://www.windowsservercatalog.com/item.aspx?idItem=ef39c5b2-2f5b-5b73-08e2-c07fecdadcff&bCatID=1521
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for