JDK Change Date settings

I need to change the date settings in JDK1.3 version. Any guide on this? I'm very new to this so pls guide me in detail..want to change from CST to CDT time zone.
Appreciate if u can send a screen shot to [email protected]
Message was edited by:
SDN_kid

You change the time zone of a calendar object using its setTimeZone method.
Set the time zone of a DateFormat with its setTimeZone method.
John O'Conner

Similar Messages

Change Date Settings in Word 2011

Currently my Microsoft Word for Mac 2011 gives me several automatic date options. However, it writes the year as "12" instead of "2012".
Example:
January 18, 12 [This is what is currently says]
January, 18, 2012 [This is what I want it to say]
Can anyone help me with this?
Thanks!

You can change the Version names by using Batch Change (Command-Shift-B) and using the same naming scheme you used when importing. Changing the names of the masters is much more complex.
Ian

Updated latest version of itunes onto windows xp.Can't open it.The Data Execution Prevention window comes up.I have followed all the directions of changing the settings.I have updated Quicktime.Still can't open it.

I updated the latest version of itunes onto my pc (windows xp) and all of a sudden I can't open it up. Everytime I try to open it I get a window that says: "Data Execution Prevention - Microsoft Windows...To help protect your computer, Windows has closed this program. Change settings." I have tried to change the settings. Uninstalled & reinstalled itunes. Updated the lates version of quicktime. Nothing has helped. If there is anyone who has a suggestion I would appreciate it. I am at my wits end with this. Thank you in advance for all your suggestions.

If anyone is looking at this and would like to know what I did to finally get it to work, I did the following: I right click on the itunes icon on my desktop.......clicked on "run as"........made sure that it ran as administrator. This finally worked for me. Hope you all find this info helpful.

No Longer able to Change Cellular Data settings. STUCK!!!!

I AM USING AN UNLOCKED 3G iPHONE WITH TMOBILE SERVICE
I use to be able to change the cellular data settings, but now out of the the blue. the options have changed!
I would go to Settings>General>Network>Cellular Data> and then more options
now when i get to _Cellular Data it only gives me the option to turn it off or on! like the wifi option_.
It wasnt like this last week and i cant seem to get it back to the way it use to be. Ive reset the network settings with no luck.
Without having the option to modify the cellular data settings i can no longer set my phone up to send/receive picture texts.
*Please HELP*

Abartylla wrote:
I dont know what happened but I plugged my external monitor in and ever since I cannot change my energy saving preferences through the icon in the bar. The icon is still there but the option does not exist any longer. Any help is appreciated
Those options were removed in 10.5.6. A well-documented change. Search these boards for more information.

Time and date settings change when phone is powered down (not shut off)..

I recently installed the iOS 8 update and immediately noticed that the time and date settings would change when I powered down my iPhone. I did not turn off my phone, only clicked the button to power down or save power. I have tried all the fixes, suggestions, etc., but I am still having issues. In the power down state, I am able to receive phone calls or texts but when I go into my phone, the time and date will be off. It stops from the moment I click the button to power down the phone. Please don't get this confused with turning off the phone completely. This happens when I click the button for power down or power save, however it is described.
So, how do I fix it? Is the app/software for the clock the problem? Is the battery distribution the problem? For some reason, in power down mode, the clock is not receiving constant power in order to keep accurate time. It stops the moment I click the button. Any suggestions? fixes, etc. I could try. Apple support techs were absolutely no help what-so-ever.

This sounds exactly like what is going on with my phone, http://www.idownloadblog.com/2012/10/19/iphone-5-date-time-glitch/

Cannot change date and time settings, popup "These files can't be opened: Your internet security settings prevented..."

When I try to change my date and time settings I get a Windows Security popup that reads: "These files can't be opened. Your Internet security settings prevented one or more files from being opened. C:\Windows\system32\rundll32.exe"
I have Windows 7 64 bit. I also have McAfee SecurityCenter installed. I have tried turning off my firewall temporarily, but the problem persists. I am not sure if it is some type of virus. If anyone could give me some information
as to what could be causing this I would appreciate it. Thanks in advance.

Hi,
Perhaps, this issue is caused by a sign of corruption.
Please try to use sfc/scannow to check the System Files.
Also, You may refer to the following link.
http://www.sevenforums.com/general-discussion/71526-cant-change-date-time-2.html
Important Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.

Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Settings for changing data

trying to change the IP settings for source system get message
:Source system default settings are maximun values; input adjusted
i am changing from 5000 to 50 000, the max it allows is 5 000 where do i go from here?
thanks

Hi,
You can also try to change the default settings from the source system side. Goto Sbiw->General settings->Maintain control parameters for data transfer.
If it dosen't allow you to change the settings, take help from your BASIS team as the table is cross client.
Cheers,
Kedar

How to get changed data in ALV in Web Dynpro for ABAP

METHOD on_data_check .
DATA:
    node_spfli                          TYPE REF TO if_wd_context_node,
    node_sflight                        TYPE REF TO if_wd_context_node,
    itab_sflight2                        TYPE if_display_view=>elements_sflight.
node_spfli = wd_context->get_child_node( name = if_display_view=>wdctx_spfli ).
node_sflight = node_spfli->get_child_node( name = if_display_view=>wdctx_sflight ).
CALL METHOD node_sflight->get_static_attributes_table
    IMPORTING
      table = itab_sflight2.
this code is ..get all data(changed and not changed)
but i want get changed data only, not all data.
how to get changed data?
Edited by: Ki-Joon Seo on Dec 27, 2007 6:04 AM

Hi,
To get only the changed data in the ALV grid of a WD, you need to capture the "ON_DATA_CHECK" of the ALV grid.
To this please do the following in the ALV initialization of the ALV table settings :
    lr_table_settings->set_data_check(
            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CELL_EVENT ).
You may also do this:
    lr_table_settings->set_data_check(            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CHECK_EVENT)
The above two ways would depend on when do you need to check for the changed data. If you want to check the data as soon as it is entered, then use the first method. Else, use the second method.
You need to register an EVENT HANDLER for this event.(You may do this in your VIEW or Component Controller).
In this Event handler, you would find an importing parameter R_PARAM which is a ref type of      IF_SALV_WD_TABLE_DATA_CHECK.
The attribute T_MODIFIED_CELLS of this interface IF_SALV_WD_TABLE_DATA_CHECK will contain the modified cells of the ALV with the old & new values.

My iPhone safair says it cannot open because it is not connected to the internet. What do I do? I do not believe I changed any settings. I have turned the phone off but this did not work.

Safari cannot open because the iPhone is not connected to internet. I do not believe I have changed any settings. I have turned off the phone and then on, but this did not work. Help?

For Safari to work, you need either Wi-Fi or cellular data.
Are you connected to a Wi-Fi hotspot?
If not is Settings > Mobile/Cellular > Mobile/Cellular Data: ON

When Updating to IOS4 Do Not Say Yes to Udpate Changes to Settings

I updated my iPhone 3g to IOS4 on release date. OK You can stop laughing at me know, I got screwed over but I was lucky.
I couldn't get the OS to install using the update so I did the work around and downloaded the OS into iTunes and did a backup and then a restore. I had read a couple of threads that said this would work a lot faster than doing the update. I had waited nearly three hours for the update to finish so I figured it was the combination of my creaky old PC, iTunes and one of the apps on my phone so I tried the restore instead of update trick. It actually worked and only took about 30 minutes start to finish.
BUT when it was done I got a dialog box telling me that I had changed my settings and did I want to apply this change to my phone <YES> or <NO>? Without thinking about it I clicked yes and my phone did another sync. I lost my address book, email and text messages all in one fell swoop. Can you spell panic and nausea? I thought you could.
I was all over the web looking for ways to restore my stuff. I tried another sync because the last one I did before installing the new OS should have still been there...No Luck.
I tried everything I could think of and nothing worked. I wasn't too worried about my email, because of course it was still out on the web (Gmail Rocks!!)
Then it occurred to me, I had been using Gmail and GSync. I set up a new G-Sync account on my phone and set it to running. It took about 24 hours total, but all of my email, contacts and text messages restored themselves to my phone wirelessly.
So I strongly recommend that you do not apply changes to your phone when you do the IOS4 update. At least not the first time around. I also do not recommend using the restore in place of update workaround. Just let the update run (and run and run and run and, well you get it)until it finishes. You should get a clean install and a total restore of your music, contacts, apps, email, etc. I have no idea why an update on an 8 Gb iPhone needs to take hours, but apparently it just does.
So to sum up:
If updating to IOS4 use the update in iTunes not restore
At the end of the update DO NOT apply changes to settings
DO use gmail and G-Sync or another email that backs up your address book to the web.

Fixed it......
The problem was my Apps library in iTunes was not populated with the apps on my phone after the update of iTunes and iOS4. Therefore, that is why I "lost" them visually. Now, had I gone and hit "Apply" I would have been screwed, since nothing was in my iTunes App library.....Sneaky.....
In iTunes, File>"Transfer Purchases from iPhone"
This populates the iTunes App library with the apps on your device. It will take a few minutes, but all of the apps will now show up when you go back and try to sync the iPhone.
Screenshot of Success!
http://i55.photobucket.com/albums/g134/leonardrock/Screenshot3.png
Nice, I'm not stupid.
Thanks for the chime-ins everybody!

I have an Iphone 4s from my work. Until 2 days ago, my iphone would notify me when I got an email or text. Now it does not notify me at all and some times it does not ring at all either. I have not changed any settings at all.

My iphone just randomly stopped notifying me when I got an email, text or voicemail. Sometimes it will not even ring. I confirmed that the volume is turned on and I have not changed any settings at all. My software is up to date. In my job I need to know when I get an email without having to constantly activate the screen or open the email icon.
Does anyone have any suggestions to fix this problem?

First, is the Mute switch activated?
Mute switch is above the volume buttons on the left side of iPhone.
If you see red/orange color the the mute is ON.
Also check Settings > Sounds > for New mail, Text Tone, etc.. have sound entries?
If that's not the case try
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

How to change Network Settings on iPhone OS 3.1.3 on my iPhone 3G?

I'm using the iPhone 3G locked with Bharti Airtel in India. Airtel, for a brief time was authorized to unlock the iPhone 3G after the completion of contract period of a year but, now it doesn't.
Airtel has three network settings but I'm unable to change the settings. I need to change it to use unlimited data plan. Is there any official way to change it? and if not, will it possible to change the settings after I unofficially unlock it? Please suggest.
P.S. I'm running the latest iPhone OS 3.1.3

sangeet.b wrote:
I'm using the iPhone 3G locked with Bharti Airtel in India. Airtel, for a brief time was authorized to unlock the iPhone 3G after the completion of contract period of a year but, now it doesn't.
Airtel has three network settings but I'm unable to change the settings. I need to change it to use unlimited data plan. Is there any official way to change it?
The ability to change the APN settings on the iPhone depends on the carrier file. Basically the carrier has told Apple if they want the settings to be enabled or not. In the case of the iPhone in Canada all carriers do not allow for the APN settings to be changed, and it would appear that Airtel is the same.
If the iPhone is being used properly with the carrier that the iPhone is locked to there should be no reason to change the APN settings.
sangeet.b wrote:
will it possible to change the settings after I unofficially unlock it? Please suggest.
P.S. I'm running the latest iPhone OS 3.1.3
As far as unlocking the iPhone goes the only way it to see if your carrier will unlock it for you. According to Apple you are correct in saying that Airtel does not offer unlocking, but you can always call them to double check.
http://support.apple.com/kb/HT1937
Hacking the iPhone is not recommended, and can not be discussed here on this forum. You can search Google, but if you are running 3.1.3 hacking your iPhone to unlock it might not even be an option.
http://support.apple.com/kb/HT3743

How to change sequence settings without CC 7.1 update?

Well, i was hoping that Adobe will release 7.1 update on October 15th, as promised on some websites. I don't recall, maybe it was Creative COW or any other.
That's why i have created 720p PRORES proxies for 9x multi-camera live performance shoot which lasts for 2 hours for lag free, fast editing.
I have sucessfully edited it and promised my clients that on October 16th they will get the whole show in 1080p, high quality.
So, there is no update yet, and yes, i can relink files to original 1080p, but the multicam sequence is capped to 720p and i simply can't find a way to change it's size.
The old fashion copy/paste way from one sequence to another does not work, since 720p sequence is linked to multicam edits. In CS6 i could edit ".prproj" file in text editor to change any properties (including sequence properties), but right now in CC, .prproj file contains binary data only, so i can't do it that way either.
Maybe someone knows any other way to change sequence settings right now, or what is the exact day for 7.1 release?
Thank you!

Hi Paolon!
You need to extract your .prproj using WinRAR to a text .prproj file, then use some text editor such as Notepad to search and replace sequence dimensions
For example find "1920" and replace it to "1280" if it looks like Īt belongs to a sequence definition.
I don't recall how it was called, maybe "VideoFrameRect" or something similar.
First create some very simple project to experiment with, and always make a backup copy in case something goes wrong

Email send/receive suddenly doesn't work ; can't change email settings as BB phone won't accept valid username and password -- what to do?

email send/receive suddenly doesn't work (as of September 24th); I can't change email settings (one suggestion from tech) as BB phone won't accept *valid* username and password -- what to do?
I understand from a support note that if I keep trying my password/username combination, my BB will eventually delete all data!
I can't understand this. I'm completely lost now. I can't remember what I've done or tried to do. A plethora of usernames and passwords is swimming in my head.
Thanks for any hints. I have always loved this BB Bold and have never had any trouble with it.

But the real question is why for the past year did the passwords work and then all of the sudden after this anomaly the disk password doesn't work? I'm not 100% sure of what my configuration was, but I know that most of the time it required one password -- supervisor, and occasionally it asked for 2 -- disk password as well I believe. This may have been related to the Password on Restart setting I think -- asking for the disk password on cold vs. warm boot. But I know both were exactly the same. But after this incident only the Supervisor password worked.

JDK Change Date settings

Similar Messages

Maybe you are looking for