JFormattedTextField insert/overwrite toggle

The insert/overwrite toggle seems not to work unless I do an InputMap/ActionMap myself. Am I doing something wrong, or is this the way it's supposed to be? With all the built-in actions, I was surprised that I had to implement insert/overwrite myself.
Also, the standard document almost always calls my custom document filter's replace method, and not my insertString method. Is this normal?
Thanks,
Eli

It would help more if you described the updated track targeting!
Edit: heres the answer for anyone else who couldnt figure it out: https://helpx.adobe.com/premiere-pro/using/source-patching-track-targetting.html
Short answer: for CC - click the very 1st column in the timeline - the source indicator.

Similar Messages

Where is insert/overwrite key

Where is the insert/overwrite key on a mac keyboard ? Or if there isn't one how can I toggle between the two functions ?

The enter key is on the keyboard that has a keypad. You might try the Return key instead.
Do you have these keys on your keyboard?
The circled key is the back Delete key. Fn + Delete is forward delete.
OT

Add insert/overwrite audio like in PP

As Audition gets more features hod-rodded from PP, why not add the insert/overwrite as well?
I often need to insert audio into a project, which means pushing all the tracks in the timeline back to make way for it. This is exactly how PP does it when using the insert button in the source monitor. Currently in Audition, when wanting to insert audio (in multitrack view), it will only overwrite, not insert.
Each time I have to resort to a work-around. I'm sure there must be others who have to do this regularly as well. Am I right?

Like others have mentioned, I've had this exact issue starting with CS3,CS4 and now CS5.
The symptoms (if an audio sync issue is present):
- Captured HDV video (Sony HDR-HC3) via premiere's capture utility - single file - entire 62 minute tape
- No dropped frames detected by premiere (although drops occurred - see below) - no red scene inserted.
- Captured video always plays fine (audio in sync) if played in windows media player, VLC, etc. etc.
If there were dropped frames in the 62 minute file (again these are not detected during capture):
- audio will progressively be more out of sync when dropped into premiere timeline. (that is - it will be in sync until the first drop, but by the end of file it may be 4 seconds out.
- Side note - 62 minute tape had 8 dropped frames detected (if captured via HDVsplit).
The issue (as others have posted), is that premiere is doing a lousy job of detecting these drops. It simply puts together the (now shorter) video on top of the original audio. Hence the sync issue.
Quick Fixes:
1. Capture video first in HDVsplit. Have it stop if frames are dropped (if you don't select this option - then it will behave as above - 62 file with drops).
       Works 100% of the time for me. Drop these shorter ("non-dropped" frame) files into premiere.
2. If you already have a single file captured w/drop issues (like the 62 minute file I have above). Do this:
     - Open that file up in HDVsplit
     - Have it generate new files on scene detection breaks
     - These generated files will be in sync when dropped into premiere for editing
This last approach is much faster then trying to resync these manually on the premiere timeline.
Ken

Silly insert/overwrite question

evidently hit a wrong key on rush job, and now when i try to overwrite or insert, clip goes to the end of the sequence.
how to fix it?
thanks

Did you inadvertently set an In Point at the end of your sequence?
If there is no In or Out point set on the timeline, the clip will be edited at the playhead location.

HT1167 removing insert/ overwrite using keyboard?

How do you removeinsert/ overwrite using keyboard?

What application are you typing in? Microsoft Word 2004, for example, can switch to insert text mode.
-Doug

Keyboard Button Insert/Overwrite on Mac OS?

Hey guys,
I was using a windows computer and realized that it had an insert button, while I could not find one on my macbook. Is there an insert button? Let me know... Thanks

What application are you typing in? Microsoft Word 2004, for example, can switch to insert text mode.
-Doug

Insert Edit and Overwrite Edit Crashes This One Premiere Project

Hi All,
I'm working off of many premiere projects, and one crashes when I use the insert edit and override edit button. At first it was only if I used the keyboard command, but now it happens when using the mouse. I'm afraid the project file is corrupted.
Has anyone come across this issue? The workarounds I have tried include copying and pasting sequences to a new project, copying contents of a sequence into a new sequence, and importing an XML to a new project (which I thought would work, but I got an error message: Premiere experienced a generic message).
Any thoughts? I'm kind of stumped and don't want to lose a few days rebuilding the project file.

Thanks for the response, Mark. And giving the version makes sense...an obvious oversight on my part
Anyway, I was running 2014 and I actually ended up uninstalling and then reinstalling. Guessing that I was at 2014.0.0, but now I have 2014.0.1. Since doing that, I haven't experienced the crashes. And, yes, it was with merged clips.
HOWEVER, I still can't target audio only and insert/overwrite merged clips without jumping through a couple hoops. Works fine if I'm targeting video only with merged clips, or if I'm targeting audio only with any kind of clip (merged or non-merged). But audio only with merged? No deal.
In order to make that work, I have to go to the merged clip in the project window, select Modify, and then futz with the the audio channels. See screen shot below. Audio tracks 1 and 2 are from my DSLR. Tracks 3 and 4 are my "good" audio. Is this something that I should need to do for each merged clip to make them work?

Insert and overwrite keyboard shortcuts making unlinked clips.

I recently switched from Mac to Windows; on the Mac, the insert/overwrite shortcuts would put the clip in the timeline as a linked clip (so the audio and video were considered a single clip). However, after switching to Windows, I've noticed that those shortcuts put the clip in the timeline unlinked, and I don't know how to change that. I'm really hoping to fix it, as it significantly slows down my editing. Thanks.

Hi Jacob,
Click the Linked Selection button. You should be OK after that.
Thanks,
Kevin

LOAD vs OVERWRITE INSERT PRODUCE DIFFERENT TABLE SIZE!!

Hi again!
Here is another issue I don't understand why happens:
The size of the table doubles if I load the data with INSERT OVERWRITE vs LOAD. As follows is an illustration of the problem:
I created a table "item". Loaded the data from item.dat (aprox 28MB). After that what happens is that the file item.dat will be moved to hive/warehouse and off course the size remains the same
Now if I create another table "item2" same as item and then load the data from item to item2 with the following command:
INSERT OVERWRITE TABLE item2 SELECT * FROM item
the size of table item2 is double of item (aprox 55MB)
Why does this happen? And is there any way to avoid it?
And the situation escalates as the size of the data grows.
ps. this is only to illustrate the problem. In practice I am interested for pre-joining tables but INSERT OVERWRITE increases the size of the joined table drastically (Actual problem: 4GB joined with 28MB gives 18GB)
Thank you!

Latest update on the issue:
I tested on cloudera as well and it is the same behavior: As follows are some details after running describe formatted <table_name> :
item (with LOAD):
33 Table Type: MANAGED_TABLE NULL
34 Table Parameters: NULL NULL
35 COLUMN_STATS_ACCURATE true
36 numFiles 1
37 numRows 0
38 rawDataSize 0
39 totalSize 28855325
40 transient_lastDdlTime 1427988576
41 NULL NULL
42 # Storage Information NULL NULL
43 SerDe Library: org.apache.hadoop.hive.serde2.lazy.LazySimpleSerDe NULL
44 InputFormat: org.apache.hadoop.mapred.TextInputFormat NULL
45 OutputFormat: org.apache.hadoop.hive.ql.io.HiveIgnoreKeyTextOutputFormat NULL
46 Compressed: No NULL
item2 (with INSERT OVERWRITE):
33 Table Type: MANAGED_TABLE NULL
34 Table Parameters: NULL NULL
35 COLUMN_STATS_ACCURATE true
36 numFiles 1
37 numRows 102000
38 rawDataSize 52058005
39 totalSize 52160005
40 transient_lastDdlTime 1427990208
41 NULL NULL
42 # Storage Information NULL NULL
43 SerDe Library: org.apache.hadoop.hive.serde2.lazy.LazySimpleSerDe NULL
44 InputFormat: org.apache.hadoop.mapred.TextInputFormat NULL
45 OutputFormat: org.apache.hadoop.hive.ql.io.HiveIgnoreKeyTextOutputFormat NULL
46 Compressed: No NULL
And now I don’t understand why the number of rows is 0 for item. When I query it returns 102000 rows

Insert key does not function in Wkindows 7

Insert key does not work in Windows 7. I use this as a toggle to insert / overwrite and since going to Windows 7 SVP1 it does not function. I do an enormous amount of editing and need this function! Using universal keyboard.
Thanks! Kym

Hello,
I'd ask in the
Windows 7 forum on Microsoft Community.
As the Microsoft Community is on a different platform, we cannot move the question for you.
Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion':
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Error message while creating Overwrite exit for a standard class method.

Hi,
I was trying to create an overwrite exit in class CL_HRTMC_AC_TA_DASHBOARD for method GET_DEVPLAN_ASSESSMENTS. I created an Enhancement Implementation first. But when I tried to insert Overwrite exit method, I got error message that "The class has not yet been converted to the new class-local types" . In the toolbar->Utilities, I saw an option "Convert Class-local types" and when I clicked that it asked for the Access key. Eventhough I cancelled the process, now I am seeing some inactive parts in from this class in my Inactive object list. When I try to activate, it's again asking for access key and not able to activate it. Not sure what has actually happened. Is it possible to revert it to old form? Please advice!
Thanks,
Mahesh Nair.

Inbound delivery is not part of Sales and Distribution. You might want to move your post to either the Logistics Materials Management (MM) forum or the Workflow forum.
Also sometimes search for OSS notes by the message class and number helps.

Inserting a clip between two clips

I'm trying to insert a clip between two clips yet still having everything from all V/A 1,2,3,4,etc. layers to move along with whatever clip is moved down the line. Everyone keep saying: Use the ctrl key! but all that does is indeed move some of it down but it cuts bits of the video in the process. I'm not sure how to solve this. I simply want to drag and drop an item between two clips and not cut or mess up any additional V layers.

You can load a title into the Source Monitor by dragging it there from the Project Panel. But you can also use the insert command directly from the Project panel, via either the context menu or the same shortcut.
Be aware that if the sequence has In/Out points set, then the Insert & Overwrite commands will insert the selected source into that range. This is known as 3-point or 4-point editing (depending on whether you have both in & out points set in both the source and the sequence). If In/Out points are not set in the sequence, then the source is inserted at the playhead's position in the Timeline.
Also, source patching controls which tracks the clip is placed on. If you're not familiar with source patching, this tutorial video is worth watching.

Insert from source monitor to a different video track

I working in a DVCPro project, and also have AVCHD. Is it possible to insert/overwrite the AVCHD from the source monitor onto Video 2 (or 3 or whatever?). I've tried targeting Video 2, but then it just inserts blankness.
thanks
kairosmatt

Targeting tracks
Be sure your Source Track is lined up
with the Target Track in your Timeline.
Click + Drag your source Track to move up or down.

Cannot insert video; just audio

in the middle of a project when I try to insert (overwrite, etc) a clip it only imports audio. If I drag it down to the timeline the video works but, both audio tracks show up but only one has the wavelenghts showing. Thanks for your help!!!! Will

Just so you know how the discussion forums are supposed to work, you should click on the or buttons over posts as appropriate...
glad it helped,
Patrick

Insert-delete key

I need the use of the windows insert/overwrite key. Where is this on the apple keyboard. How can I reprogram a key to do this?

Carl Daehler wrote:
Thanks, Stefan. I was hopeful there was an equivelant key on the Macpro keyboard, but apparently the "help" key is only on the full apple keyboard. There does not appear to be an equivelant key listed for the macpro.
Any other ideas?
Hi Carl,
I associated Mac Pro with Apple Pro keyboard since you didn't tell which one you have.
Here are the other Apple keyboards http://support.apple.com/kb/HT1167
Click on the 'more information links below the keyboard you have to see the key mappings.
Hope it helps
Stefan

JFormattedTextField insert/overwrite toggle

Similar Messages

Maybe you are looking for