JMS Adapter test

Hi to all,
I have a JMS -> XI -> RFC scenario. Actually, I haven't my sender Business System, thus I want to use something to test my JMS Adapter. There is any tool that I can use to test my JMS adapter/channel or to simulate a MQSeries sender?
Thanks to all!

You can put a test message directly in your communication channel:
RWB -> Component Monitoring -> Integration Engine -> Test Message
or
You can create your own queue on the j2ee server:
See blogs of William Lee - How to use SAP's WebAS J2EE's JMS Queue in Exchange Infrastructure
or
If your queue is in place, you can use a tool like rfhutil, but then you also need a mq client on your workstation. (all free so why not)

Similar Messages

  • JMS Adapter Testing

    Hi Team
    I am using the JMS adapter as a sender and the idoc as receiver. i want to test the  End to End scenario. i am using the Transport Protocol as " Access JMS Provider with JNDI".
    I have been provide by a program which helps to write the xml message into the queue.
    My doubt is how to run this program and where to run this java program??
    this is the first time i am developing scenario by using the JMS adapter
    Awaiting for your replies
    thanx

    Hi,
    Are you trying to test the scenario JMS -> PI ?
    If you are trying to add a message to the queue, you can use MQ client software to do this - this allows you to connect to a remote queue manager and add messages to any queue on the queue manager.
    Cheers
    Colin.

  • Jms adapter configuration and testing

    Hi,
    Please inform the JMS adapter configuration and testing.
    Thanks
    Naidu

    Hi,
    tried to reach JMS adapter but was not sure about what to inform it with
    Ok, just being silly there... About your problem:
    Overview - not complete and a little dated but notetheless good starting point
    Exploring JMS and SAP-XI JMS Adaper
    JMS FAQ Note - valuable official statements for various questions. Many linked notes which may also be of interrest
    http://service.sap.com/sap/support/notes/856346
    Driver deployment note
    http://service.sap.com/sap/support/notes/1138877
    Some other valuable links provided by Chirag Gohil
    Re: jms senarios
    HTH for starters
    Cheers
    Jens

  • Problem testing JMS adapter

    I have create and configure JMS resource but still i am getting this exception
    Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'sendMessage' failed due to: ERRJMS_ERR_CR_QUEUE_PROD. ERRJMS_ERR_CR_QUEUE_PROD. Unable to create Queue producer due to JMSException. Please examine the log file to determine the problem. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
    Fault
    BINDING.JCA-12563 Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'sendMessage' failed due to: ERRJMS_ERR_CR_QUEUE_PROD. ERRJMS_ERR_CR_QUEUE_PROD. Unable to create Queue producer due to JMSException. Please examine the log file to determine the problem. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
    Kindly help

    This is how I configured
    Configure the JMS Queue Resource (Jndi name=>>> jms/demoMsgQueue)
    Configured the JMS Connection Factory Resource
    configured the demoCF JMS connection factory
    Created a JMS Adapter Connection Pool
    Associate the Connection Pool with the Connection Factory
    Redeployed the JMS Adapter with the New Resources
    How I can do bouning app server?

  • Having multiple service operations in a single JMS adapter best practice

    Hi All,
    I am using JDeveloper and SOA Suite 11.1.1.6. I need to read from multiple JMS Topics and transform and enhance the messages through the Mediator and then persist into Database.
    My question is
    What is the best practice to consume from multiple topics, Should I configure separate JMS adapter for each of the Topic destination
    OR
    have a single JMS adapter with multiple operations by manually changing the JMS adapter wsdl and jca file?
    I find cannot have
    Please suggest.
    Thanks in advance
    Edited by: user5108636 on 15/05/2013 11:36

    Hi Vijay,
    did you actually test this? When I finish creating a DBAdapter, there is a operation present. Then when I click edit again on the DBAdapter, and I create another select, when I finish only the first operation is gone, and I can only see the one I've created via the last edit.
    I dont understand your reply. Can I have two operations, each one with select underneath, in the same adapter?
    Edited by: user13604541 on Jan 30, 2012 11:19 AM

  • Unable to get BPEL composite with JMS Adapter running.

    Hello All,
    I have tried to build a BPEL Composite to use JMS Adapter, by following the link http://blogs.sun.com/malkit/entry/oracle_soa_suite_bpel_to
    Steps in WebLogic console:
    1. Created a new JMS Server JMSServer-0 (file persistent store) this is targeted to AdminServer
    1. Created a new JMS Module SystemModule-0
    3. Created a connection factory in this module JNDI jms/SendRecvConnectionFactory
    4. Created a queue in this module JNDI jms/ReceiveQueue
    5. Created a SubDeployment Subdeployment0 for these two components.
    6. Created a new JMSAdapter connection pool JNDI eis/tst/TestJMSConn and set the ConnectionFactoryLocation property to jms/SendRecvConnectionFactory
    Next, I created a simple Java client and tested the JMS Queue to work fine. This went well.
    Next, used JDeveloper to create a BPEL Composite to use JMSAdapater, and followed the guidelines given in the above URL to create the JCA file.
    While deploying this BPEL composite, I hit a warning in SOA diagnostic server:
    JMSAdapter JMSSampleProj JmsDDEndpoint_onFailure: Unable to resolve 'jms.ReceiveQueue'
    As a result of this warning, the BPEL Composite instances do not get created when I send a message from the test client.
    Please find herewith the log details.
    I am using JDeveloper Build JDEVADF_11.1.1.4.0_GENERIC_101227.1736.5923 and FMW 11g R1 PS3 RC11.
    Any help here?
    [2011-04-20T08:33:12.098-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.bpel.engine.deployment] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] BPEL Component "default/JMSSampleProj!1.0*soa_8a1f7f5d-5ede-4e3a-8740-20fb90ffdab2/JMSampleProcess" successfully loaded.
    [2011-04-20T08:33:12.098-05:00] [soa_server1] [NOTIFICATION] [] [oracle.integration.platform.blocks.deploy] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] [Deployment] Component: JMSampleProcess was successfully deployed to service engine:implementation.bpel, for composite:JMSSampleProj
    [2011-04-20T08:33:12.114-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JCABinding=> [JMSSampleProj.OutBound/1.0] :init Initializing OutBound_jms.jca
    [2011-04-20T08:33:12.114-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JCABinding=> OutBound JCAEndpointInteraction::initInteraction - Activating Endpoint Interaction, Endpoint Id='OutBound
    [2011-04-20T08:33:12.114-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JCABinding=> [JMSSampleProj.OutBound/1.0] :init Successfully initialized OutBound_jms.jca
    [2011-04-20T08:33:12.114-05:00] [soa_server1] [NOTIFICATION] [] [oracle.integration.platform.blocks.mesh] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] EventBus not null
    [2011-04-20T08:33:12.114-05:00] [soa_server1] [NOTIFICATION] [] [oracle.integration.platform.blocks.mesh] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] component : Component Name: JMSampleProcess[[
    implementation: oracle.fabric.composite.component.implementation.BPELImplementation@51db9e4
    oracle.fabric.composite.model.ComponentTypeModel@51db9e6
    [2011-04-20T08:33:12.114-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.bpel.engine] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] CubeServiceEngine=> initing default/JMSSampleProj!1.0*soa_8a1f7f5d-5ede-4e3a-8740-20fb90ffdab2/JMSampleProcess
    [2011-04-20T08:33:12.458-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JCABinding=> [JMSSampleProj.InBound/1.0] :load Loading InBound_jms.jca ..
    [2011-04-20T08:33:12.473-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JCABinding=> InBound Performing JCAEndpointActivation::prepareActivation for {PayloadType=TextMessage, UseMessageListener=false, DestinationName=jms/ReceiveQueue}
    [2011-04-20T08:33:12.473-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JCABinding=> InBound JCAEndpointActivation::prepareActivation - Locating JCA Binding Component instance: SCA_AS11R1
    [2011-04-20T08:33:12.473-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JCABinding=> InBound JCAEndpointActivation::initiateInboundJcaEndpoint - Creating and initializing inbound JCA endpoint for:[[
    endpoint='InBound'
    WSDL location='oramds:/deployed-composites/default/JMSSampleProj_rev1.0/InBound.wsdl'
    portType='Consume_Message_ptt'
    operation='Consume_Message'
    activation properties={PayloadType=TextMessage, UseMessageListener=false, DestinationName=jms/ReceiveQueue}
    [2011-04-20T08:33:12.473-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JCABinding=> InBound JCAEndpointActivation::initiateInboundJcaEndpoint - Creating endpoint (0) for InBound
    [2011-04-20T08:33:12.473-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JCABinding=> InBound JCAEndpointActivation::prepareActivation - Done preparing JCAEndpointActivation for Service 'InBound'
    [2011-04-20T08:33:12.473-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JCABinding=> [JMSSampleProj.InBound/1.0] :load Successfully loaded InBound_jms.jca
    [2011-04-20T08:33:12.473-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JCABinding=> [JMSSampleProj.InBound/1.0] :init Initializing InBound_jms.jca
    [2011-04-20T08:33:12.473-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JCABinding=> InBound JCAEndpointActivation::performActivation - Performing JCA Endpoint Activation, Endpoint Id='InBound'
    [2011-04-20T08:33:12.473-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JCABinding=> InBound Performing endpoint activation (1) for InBound
    [2011-04-20T08:33:12.473-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JCABinding=> JMSSampleProj JCA Binding Component instance: SCA_AS11R1 - endpointActivation for portType=Consume_Message_ptt, operation=Consume_Message
    [2011-04-20T08:33:12.473-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JCABinding=> JMSSampleProj Creating new instance of Resource Adapter oracle.tip.adapter.jms.JmsResourceAdapter
    [2011-04-20T08:33:12.473-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JCABinding=> JMSSampleProj JCA Binding Component instance: SCA_AS11R1 - starting Resource Adapter oracle.tip.adapter.jms.JmsResourceAdapter
    [2011-04-20T08:33:12.473-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JMSAdapter JmsResourceAdapter_start: Jms Adapter started
    [2011-04-20T08:33:12.520-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JMSAdapter JmsResourceAdapter_endpointActivation: Activating endpoint Endpoint_1
    [2011-04-20T08:33:12.520-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JMSAdapter JMSSampleProj JmsDDEndpoint_start: Starting endpoint Endpoint_1
    [2011-04-20T08:33:12.520-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JMSAdapter JMSSampleProj JmsDDEndpoint_run: Calling register...
    [2011-04-20T08:33:12.520-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JCABinding=> JMSSampleProj JCA Binding Component instance: SCA_AS11R1 - successfully completed endpointActivation for portType=Consume_Message_ptt, operation=Consume_Message
    [2011-04-20T08:33:12.520-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JCABinding=> [JMSSampleProj.InBound/1.0] :init Successfully initialized InBound_jms.jca
    [2011-04-20T08:33:12.520-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] JCABinding=> :defaultRevisionChanged - updated default revision to default/JMSSampleProj!1.0 for default/JMSSampleProj
    [2011-04-20T08:33:12.567-05:00] [soa_server1] [NOTIFICATION] [SOA-21538] [oracle.integration.platform.blocks.deploy.servlet] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] Removing temporary directory: C:\DOCUME~1\abhatika\LOCALS~1\Temp\1\sar_base_dir_1303306387379.
    [2011-04-20T08:33:12.567-05:00] [soa_server1] [NOTIFICATION] [SOA-21557] [oracle.integration.platform.blocks.deploy.servlet] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041f2,0] [APP: soa-infra] CompositeDeploymentServlet-----> completed deploying sca_JMSSampleProj_rev1.0.jar successfully. Time spent: 5.188 sec.
    [2011-04-20T08:33:13.036-05:00] [soa_server1] [WARNING] [] [oracle.soa.adapter] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: epm_admin] [ecid: 1351f73362dee8bb:-13137bc6:12f727dea12:-8000-00000000000041fd,0] [APP: soa-infra] JMSAdapter JMSSampleProj JmsDDEndpoint_onFailure: Unable to resolve 'jms.ReceiveQueue'. Resolved 'jms'

    Hi,
    Try targetting it to soa_server1 instead of admin server.

  • Configuring JMS adapter for a BPEL process which puts a msg in a Q of MQ

    Hi,
    I am trying to develop a BPEL process which picks up a message from a Q in Websphere MQ and puts that message in another Q of MQ after processing that.
    I have updated the oc4j-ra.xml with the following inputs:
    <connector-factory location="eis/MQSeries/Queue" connector-name="Jms Adapter">
              <config-property name="connectionFactoryLocation" value="com.ibm.mq.jms.MQQueueConnectionFactory"/>
              <config-property name="factoryProperties" value="QueueManager=TestManager;TransportType=1;Hostname=machine's ip address;Port=1414;Channel=channel name for connecting to client"/>
              <config-property name="acknowledgeMode" value="AUTO_ACKNOWLEDGE"/>
              <config-property name="isTopic" value="false"/>
              <config-property name="isTransacted" value="true"/>
              <config-property name="username" value="admin"/>
              <config-property name="password" value="welcome"/>
         </connector-factory>
    But while testing the BPEL process, I get the error:
    <remoteFault>
    <part name="code" >
    <code>null</code>
    </part>
    <part name="summary" >
    <summary>file:/D:/OraBPELPM_2/integration/orabpel/domains/default/tmp/.bpel_MQMessaging_1.0.jar/Outbound.wsdl [ Produce_Message_ptt::Produce_Message(SourceEmployee) ] - WSIF JCA Execute of operation 'Produce_Message' failed due to: Adapter Framework unable to create outbound JCA connection. file:/D:/OraBPELPM_2/integration/orabpel/domains/default/tmp/.bpel_MQMessaging_1.0.jar/Outbound.wsdl [ Produce_Message_ptt::Produce_Message(SourceEmployee) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: ORABPEL-12141 ERRJMS_CONN_FAC_NOT_FOUND. Unable to instantiate connection factory. JMS adapter was unable to look up the connection factor com.ibm.mq.jms.MQQueueConnectionFactory neither through JNDI nor instantiate it as a Java class Please examine the log file to determine the problem. ; nested exception is: ORABPEL-12511 Adapter Framework unable to create outbound JCA connection. file:/D:/OraBPELPM_2/integration/orabpel/domains/default/tmp/.bpel_MQMessaging_1.0.jar/Outbound.wsdl [ Produce_Message_ptt::Produce_Message(SourceEmployee) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: ORABPEL-12141 ERRJMS_CONN_FAC_NOT_FOUND. Unable to instantiate connection factory. JMS adapter was unable to look up the connection factor com.ibm.mq.jms.MQQueueConnectionFactory neither through JNDI nor instantiate it as a Java class Please examine the log file to determine the problem. Please examine the log file for any reasons. Enable DEBUG logging in the BPEL Console. </summary>
    </part>
    <part name="detail" >
    <detail>null</detail>
    </part>
    </remoteFault>
    Can anyone tell me what has gone wrong in setting the connection factory for the Q or what else I have to configure to sort out this problem?
    Thanks,
    Jayatu

    I am experiencing the exact same issue while configuring for Tibco EMS!!!
    I have also checked the oc4j-xa.xml file etc and I am also unable to find any guidance on the steps required from XML config files through to adapter wizard entries!

  • Send attachment via Receiver FILE/JMS adapter without using any Mapping.

    Hi,
    R/3 program creates one (encoded) text file, which I want to send via Proxy to JMS adapter without any mapping or FCC.
    Note: I don't want to use File adapter to pick the file from R3 dir and then send it to JMS.
    Reference: I have gone through below mentioned blog which produces the attachment in the XI payload but I am not able to write the same attachment to my XI dir using Receiver File adapter (File adapter is just for testing actual adapter will be used as Receiver JMS adapter).
    /people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
    Regards,
    Sarvesh

    > note sure why you want to complicate things here
    Actually the idea was to explore the possibilities of "Proxy with attachment". And I also wanted to confirm with experts like you before going to other options. Anyway it seems it's only possible with mail adapter.
    Reason for exploring above possibility: Since ABAP team has to create one text file and encode it, so we thought to call the outbound proxy in the ABAP program to send the same file as an attachment and then simply send it to JMS. Which is quite obvious thinking when you don't want to manage a share directory between R3 & XI or don't want to manage FTP user and pwd.
    > i think the simplest thing is to go for a simple file to jms configuration unless you have any specific reasons for not doing so.
    This we already kept in our mind as a last option in case if above thing is not possible then we can easily do it by this way.
    Thanks a lot for suggestion.
    Regards,
    Sarvesh

  • Configuration for sync/async bridge in Jms adapter

    Can someone give me a hint what I might be doing wrong?
    The scenario is: synchronous proxy to jms.
    Integration repository:
    Created synchronous outbound interface and synchronous inbound interface, message mapping, interface mapping.
    Integration directory:
    Created jms receiver communication channel and jms sender communication channel and configured them according "How to correlate jms messages".
    Created receiver determination, interface determination and receiver agreement.
    No sender agreement necessary for proxy sender.
    So far so good, but...
    Both the receiver and sender jms adapter have its own queue (the receiving system will get the request in one queue and put the response in another).
    <b>How does the waiting jms receiver adapter know where to expect the answer?</b>
    When I test this scenario the (outbound) message get the status "Log version" (abap moni) and "To be delivered" (java moni).
    PS:
    The testing is performed by using the tool rfhutil. With this tool you can read and write directly from/to the MQ queues where the jms adapters are pointing to.
    After receipt of the request in the queue of the reveicer jms communication channel, I manually put a message in the queue of the sender jms communication channel with the XI message ID filled in the correlation ID.

    More information, In the jms adapter the following error appears:
    XI inbound processing failed for message at time 2007-06-11|11:12:48.908+0100. JMS and XI identifiers for the message are ID:414d512052545849444556312020202045f55b6c20d73102 and 4e5bff20-1804-11dc-c2b4-00096b6ed15c respectively. The JMS adapter will rollback the database and JMS session transactions. If the session is transacted, the message is not lost and will be retried later. The exception stack trace is java.lang.Exception: Minimum address data not configured. Field InterfaceNamespace is empty.
         at com.sap.aii.af.service.jms.WorkerJMSReceiver.onMessage(WorkerJMSReceiver.java:1516)
         at com.ibm.mq.jms.MQMessageConsumer.receiveAsyncQ(MQMessageConsumer.java:2538)
         at com.ibm.mq.jms.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:4260)

  • IDOC-XI-JMS Adapter

    Hi
    I have to build interface for scenario IDOC-XI-JMS adapter and legacy syetem is MQ-series. All the jar files has been deployed which is the pre-requisite to use JMS adapter.
    Can anyone tell me if I should send data in file or as message.
    Also if you can tell me the steps to build this interface. Please refer to some relevant blogs but would appriciate if you can explain me steps.
    Points will be rewarded for the appropirate replies.
    Regards

    Hi,
    >IDOC-XI-JMS adapter
    Sender Side IDOC Adapter, Hence No Need Sender Agreement,  Import the IDOC in XI System , Declare the Data Type  for the Receiver side..Message Type..Message Interface as Ingoung..Do Message Mapping..Interface Mapping..In Configuratio Receiver JMS Adapter. Mention the Driver Information,User ID & Password and go ahead and test it
    Regards
    Agasthuri  Doss

  • XML document conversion to Plain document in XI using JMS Adapter?

    Hi,
    We are trying to send an soap based XML document from ECC to MQSeries 6.0 using PI 7.0. I created receiver communicaiton channel to MQ with the below modules
    1. AF_Modules/MessageTransformBean - Module Key XML2Plain
    2. SAP XI JMS Adapter/ConvertMessageToBinary - Module Key CallJMSService
    3. SAP XI JMS Adapter/SendBinarytoXIJMSService - Module Key Exit
    Module configuration parameters I provided are
    XML2Plain-  Transform.Class com.sap.aii.messaging.adapter.Conversion
                       TransformContentType text/plain;charset=utf-8
                       xml.addHeaderLine 0
                       xml.conversionType SimpleXML2Plain
                       xml.fieldSeparator ,
                       xml.fixedLengthTooShortHandling Cut
    The payload I am using is
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_Company xmlns:ns0="http://bnsf.com/hr/tm">
       <Row CCODE="1001" DESC="test company"/>
    </ns0:MT_Company>
    When I test in RWB
    1. The channel monitoring shows green and the below message
    "Successfully connected to destination 'queue:///QL_DAVEOUT?targetClient=1"
    2. RWB shows error message "Error while sending message:invalid content type  for SOAP:TEXT/HTML;HTTP 500 Timeout"
    3. when I look at the message, I see the last message shows as
    "2008-06-16 15:16:44 Success Transform: transforming the payload ..." and I do not see any more messages.
    Can anyone help me here? Thanks in advance

    I changed the payload to
    <xml version="1.0" encoding="UTF-8">
    <ns0:MT_Company xmlns:ns0="http://bnsf.com/hr/tm">
    <row CCODE="1001" DESC="TEST" />
    </ns0:MT_Company>
    this time i am getting
      <Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_SAP_COMPANY_TO_MQ_COMPANY_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Fatal Error: com.sap.engine.lib.xml.parser.ParserException: </ expected(:main:, row:4, col:17)</Trace>
      <Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_SAP_COMPANY_TO_MQ_COMPANY_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Fatal Error: com.sap.engine.lib.xml.parser.ParserException: </ expected(:main:, row:4, col:17) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:73) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor411.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy220.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: </ expected(:main:, row:4, col:17) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:187) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:151) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:118) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor411.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy220.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: </ expected(:main:, row:4, col:17) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:157) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73) at java.lang.Thread.run(Thread.java:534) Root Cause: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: </ expected(:main:, row:4, col:17)(:main:, row=4, col=17) -> com.sap.engine.lib.xml.parser.ParserException: </ expected(:main:, row:4, col:17) at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1872) at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1846) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2845) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:231) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261) at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280) at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342) at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125) at javax.xml.parsers.SAXParser.parse(SAXParser.java:345) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:155) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73) at java.lang.Thread.run(Thread.java:534) -
    at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:144) at javax.xml.parsers.SAXParser.parse(SAXParser.java:345) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:155) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73) at java.lang.Thread.run(Thread.java:534) Caused by: com.sap.engine.lib.xml.parser.ParserException: </ expected(:main:, row:4, col:17) at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1872) at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1846) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2845) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:231) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261) at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280) at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342) at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125) ... 4 more</Trace>

  • Configuration of JMS Adapter in Central Adapter Engine

    Hi all,
    I have configured Sender JMS Adapter in Central Adapter Engine with the following parameters:
    Adapter type : JMS
    Transport Protocol : WebSphere MQ (non-jms)
    Message Protocol : JMS1.x
    Adapter Engine : Integration Server
    Queue Connection Factory java class :Com.ibm.mq.jms.MQQueueConnectionFactory
    Queue java class : com.ibm.mq.jms.MQQueue
    ipadd : localhost
    port : 1414
    Queue Manager name : TEST.QMGR
    Channel Name : CH1
    JMS Queue : LQ
    CCSID : 437
    Protocol : TCP/IP
    JMS-compliant : WebSphere MQ(non-jms)
    JMS Queue user : MUSR_MQADMIN
    Mapping of message : Entire Message = JMS Payload
    But the status is red with an error message Sender Details : NULL
    Could you please tell me what went wrong?
    Regards
    Sathya

    Hi,
    Make sure that Websphere MQ server is running.
    If u r comfortable with java, you can even write a Java code to acces the server and check if the JMS server is working fine. Some times there will be sample applications provided by Websphere MQ itself.
    Once the java program works then it will be easy to debug the error over here.
    Regards,
    P.Venkat

  • Message Conversion in JMS adapter

    Hello Friends,
    I have a scenario where in I will be getting the message from MQ, and the message will look like
    <b>SOURCE</b>
    <Root><MessageHeader><MessageID><MessageIDSystem>SCV</MessageIDSystem><MessageIDType>FE</MessageIDType><MessageIDIdentifier>CUSTOMER_MASTER</MessageIDIdentifier></MessageID><MessageReleaseNo>0004</MessageReleaseNo><MessageVersionNo>00</MessageVersionNo><MessageOrigApplID>SCV</MessageOrigApplID><MessageDestApplID>BROKER</MessageDestApplID><MessageInterfaceID>IDD088</MessageInterfaceID></MessageHeader><MessageBody><SCVData>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</SCVData></MessageBody></Root>
    and the ascii data in this message needs to be converted into XML format.
    JMS Adapter is picking this message from MQ and posting it to XI.
    Also there is an adapter module develped for this conversion and it is working fine for most of the messages, but it failing for this above message.
    Can you please help me out in this issue and how to test that adapter module.
    Thanks & Regards,
    Kumar

    hi kumar,
    >>Can you please help me out in this issue and how to test that adapter module.
    put brek points in ur adapter module and then run ur scenario and debug. this is how u test ur adapter module.
    this will also help u to see why is it running for certain msgs n failin for others. at different steps/points check the value for variables etc while debugging.
    Also put some statements to write audit log entries in ur code for module. this will also help in debugging.
    [reward if helpful]
    regards,
    latika.

  • How to set the Correlation ID in Oracle Q from JMS Adapter

    Hi,
    I'm using a JMS Adapter on my BPEL process to push messages to an Oracle instance in another machine.
    While testing, I could see that a message is posted on the Q table, but the Correlation ID is null.
    How is the correlation ID on the Q set from the adapter? IDeally I want this ID dynamic to be unique.
    Is this something st on the Invoke activity to the jms adapter, i.e., the Correlations tab, or is that
    unrelated altogether.
    Thanks,
    Ramon

    Found the solution.
    On the Invoke activity, I set the property jca.jms.JMSCorrelationID to a variable I created.
    I set my variable to string appended with sysdate to make it unique.

  • Problem Encountered in JMS adapter using SEEBURGER module

    While testing the receiver JMS adapter for XML to EDI conversion using Seeburger module, I am facing errors.
    <b>1. The error encountered is</b> :
    Error while processing message '4720bc32-2dfc-03d8-0000-00000a2050d3';  detailed error description: java.lang.NullPointerException at com.sap.aii.adapter.jms.core.connector.SendContextImpl.send(SendContextImpl.java:43) ...
    <u>SEEBURGER BICXIADAPTER</u> --- Conversion of synchronous request from module chain ended with errors ---Error: [Error:ID=2061;LEVEL=1] XMLDocReader moveNext(): Cannot move to next trigger : Error in line 1: <u>XML file should begin with white spaces or <. (Found char :U(Hex :85</u>). DESCRIPTION: XMLDocReader Exception: Not able to move to next trigger [not specified] - trigger may not right set.
    <b>2. The targer PAYMUL xml is as follows</b> :
    ( At receiver channel, the above should be converted to EDI-Paymul using the Seeburger Module)
    <u>PAYMUL XML</u>
      <?xml version="1.0" encoding="UTF-8" ?>
    - <LIST>
    - <S_UNA>
      <D_DELIMITER>:+.? '</D_DELIMITER>
      </S_UNA>
    - <S_UNB>
    - <C_S001>
      <D_0001>UNOA</D_0001>
      <D_0002>2</D_0002>
      </C_S001>
    - <C_S002>
      <D_0004>SAPDM</D_0004>
      <D_0007>ZZ</D_0007>
      </C_S002>
    - <C_S003>
      <D_0010>000000000000</D_0010>
      <D_0007>55</D_0007>
      </C_S003>
    - <C_S004>
      <D_0017>070201</D_0017>
      <D_0019>1150</D_0019>
      </C_S004>
      <D_0020>01945678912345</D_0020>
    - <S_UNH>
      <D_0062>1</D_0062>
    - <C_S009>
      <D_0065>PAYMUL</D_0065>
      <D_0052>D</D_0052>
      <D_0054>96A</D_0054>
      <D_0051>UN</D_0051>
      <D_0057>FUN01G</D_0057>
      </C_S009>
    - <S_BGM>
    - <C_C002>
      <D_1001>452</D_1001>
      </C_C002>
      <D_1004>01945678912345</D_1004>
      <D_1225>9</D_1225>
      </S_BGM>
    - <S_DTM>
    - <C_C507>
      <D_2005>137</D_2005>
      <D_2380>20070201</D_2380>
      <D_2379>102</D_2379>
      </C_C507>
      </S_DTM>
    - <G_SSG4>
    - <S_LIN>
      <D_1082>1</D_1082>
    - <S_DTM>
    - <C_C507>
      <D_2005>203</D_2005>
      <D_2380>20070201</D_2380>
      <D_2379>102</D_2379>
      </C_C507>
      </S_DTM>
    - <S_RFF>
    - <C_C506>
      <D_1153>ACK</D_1153>
      <D_1154>01945678912345</D_1154>
      </C_C506>
      </S_RFF>
    - <S_RFF>
    - <C_C506>
      <D_1153>AEK</D_1153>
      <D_1154>01945678912345</D_1154>
      </C_C506>
      </S_RFF>
    - <S_BUS>
      <D_3279>IR</D_3279>
    - <C_C551>
      <D_4383>UGI</D_4383>
      </C_C551>
      </S_BUS>
    - <G_SSG5>
    - <S_MOA>
    - <C_C516>
      <D_5025>9</D_5025>
      <D_5004>5000</D_5004>
      <D_6345>EUR</D_6345>
      </C_C516>
      </S_MOA>
      </G_SSG5>
    - <G_SSG6>
    - <S_FII>
      <D_3035>OR</D_3035>
    - <C_C078>
      <D_3194>ES921998500000000012</D_3194>
      <D_6345>EUR</D_6345>
      </C_C078>
    - <C_C088>
      <D_3433>ABNAES17000</D_3433>
      <D_1131>25</D_1131>
      <D_3055>5</D_3055>
      </C_C088>
      <D_3207>ES</D_3207>
      </S_FII>
      </G_SSG6>
    - <G_SSG7>
    - <S_NAD>
      <D_3035>OY</D_3035>
    - <C_C080>
      <D_3036>XYZ CORPORATION LTD</D_3036>
      </C_C080>
    - <C_C059>
      <D_3042>XX</D_3042>
      </C_C059>
      <D_3164>XX</D_3164>
      <D_3207>ES</D_3207>
      </S_NAD>
      </G_SSG7>
    - <G_SSG11>
    - <S_SEQ>
    - <C_C286>
      <D_1050>1</D_1050>
      </C_C286>
    - <S_MOA>
    - <C_C516>
      <D_5025>9</D_5025>
      <D_5004>5000</D_5004>
      <D_6345>EUR</D_6345>
      </C_C516>
      </S_MOA>
    - <S_DTM>
    - <C_C507>
      <D_2005>227</D_2005>
      <D_2380>2007-02-01</D_2380>
      <D_2379>102</D_2379>
      </C_C507>
      </S_DTM>
    - <S_RFF>
    - <C_C506>
      <D_1153>AIK</D_1153>
      <D_1154>01901234567890</D_1154>
      </C_C506>
      </S_RFF>
    - <S_RFF>
    - <C_C506>
      <D_1153>CR</D_1153>
      <D_1154>01901234567890</D_1154>
      </C_C506>
      </S_RFF>
    - <S_FCA>
      <D_4471>13</D_4471>
      </S_FCA>
    - <G_SSG12>
    - <S_FII>
      <D_3035>BF</D_3035>
    - <C_C078>
      <D_3194>AT921998500000000011</D_3194>
      <D_6345>EUR</D_6345>
      </C_C078>
    - <C_C088>
      <D_3433>ABNAAT14000</D_3433>
      <D_1131>25</D_1131>
      <D_3055>5</D_3055>
      </C_C088>
      <D_3207>ES</D_3207>
      </S_FII>
      </G_SSG12>
    - <G_SSG13>
    - <S_NAD>
      <D_3035>BE</D_3035>
    - <C_C080>
      <D_3036>ABC CORPORATION 1</D_3036>
      </C_C080>
    - <C_C059>
      <D_3042>XX</D_3042>
      </C_C059>
      <D_3164>XX</D_3164>
      <D_3207>ES</D_3207>
      </S_NAD>
      </G_SSG13>
    - <G_SSG16>
    - <S_PRC>
    - <C_C242>
      <D_7187>11</D_7187>
      </C_C242>
    - <S_FTX>
      <D_4451>PMD</D_4451>
    - <C_C108>
      <D_4440>SENDERPN1</D_4440>
      </C_C108>
      </S_FTX>
      </S_PRC>
      </G_SSG16>
      </S_SEQ>
      </G_SSG11>
      </S_LIN>
      </G_SSG4>
    - <S_CNT>
    - <C_C270>
      <D_6069>2</D_6069>
      <D_6066>1</D_6066>
      </C_C270>
      </S_CNT>
    - <S_UNT>
      <D_0074>1</D_0074>
      <D_0062>1</D_0062>
      </S_UNT>
      </S_UNH>
    - <S_UNZ>
      <D_0036>1</D_0036>
      <D_0020>01945678912345</D_0020>
      </S_UNZ>
      </S_UNB>
      </LIST>
    <b>3. The module parameters for Seeburger inputs :</b>
    ( In receiver communication channel)
    <b>Processing Sequence</b>
    localejbs/CallBicXIRaBean               Local Ent Bean     x2e_bic_paymul
    SAP XI JMS Adapter/ConvertMessageToBinary     Local Ent Bean     convert_XI2Bin
    SAP XI JMS Adapter/SendBinarytoXIJMSService     Local Ent Bean     
                    exit
    <b>Module Key</b>
    x2e_bic_paymul     destSourceMsg     MainDocument
    x2e_bic_paymul     destTargetMsg     MainDocument
    x2e_bic_paymul     logAttID          ConverterLog
    x2e_bic_paymul     mappingName     See_X2E_PAYMUL_UN_D96A
    x2e_bic_paymul     newLine          true
    x2e_bic_paymul     saveSourceMsg     XMLEDI

    Hi,
    Check Below links,
    /people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
    http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
    http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
    http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
    SAP Adapters
    Regards,
    Phani

Maybe you are looking for

  • F110 Payment Run - BTE / Exits

    Hi ABAP Gurus, Good day. Currently, our Direct Debit Collection file is being created via Transaction F110 during Payment Run. Basically, the Direct Debit file is being uploaded in AL11 after the Payment Run Transaction F110. Please be informed that

  • HT5361 Switching from Eudora to Apple Mail

    I have an eMac that was upgraded to Mac OS X v. 10.5.8.  I need to get a new machine.  But I am using Eudora as my mail client and it can't be upgraded and will not work with later systems, so I am trying to switch to Apple Mail which I assume will b

  • MS Outlook Mac 2011 , mail disappearing draft

    If i send mail from my outlook mac 2011, aol account, and I am BCC multiple accounts; if one of those accounts are invalid, I get an error but can not fix it. The email is nowhere to be found. It is not in my drafts?? I want to delete the invalid ema

  • Can size of RBS tablespace be reduced?

    Hi folks. Hope this is the right forum for this question. Anyway, we're running Oracle 8.1.6 Standard Edition on Win NT 4.0. A few months ago, we ran a SQL Update statement on a table with 176,000 rows and then did a Commit. As a result our RBS (roll

  • Will the iPhone 3Gs 32 GB slower than the 16 or 8 GB 3Gs models

    i just want to know that will the 32 gb iphone 3gs will be slower than the mobels with less storage as i had a n97 32 gb wich was slower than the 16 gb n97 mini