JMS sender cc error: Error while calling operation 'setChannel' for object

Hi guys,
I'm getting following error in my sender JMS adapter which tries to connect to Websphere MQ:
Error while calling operation 'setChannel' for object '| com.ibm.mq.jms.MQQueueConnectionFactory
it is then followed by connection and system parameters.
Any idea, what could be wrong?
I also doubt about cc's connection parameters:
- transport network protocol: should I use TCP/IP or WebsphereMQ?
- JMS compliant: non-JMS or JMS compliant?
thanks for your help,
olian

Hi Olian,
the configuration of a JMS adapter requires close working with the MQ team. they are best people to tell you what is the correct parameter value.
depending on the "transport protocol" he will be able to help you complete the configuration.
if you have chosen "websphere MQ (non-jms)", the transport/network protocol and Jms-compliance depends on the configuration made on the network and MQ.
Raghu

Similar Messages

"An internal error occured while calling 'answerPrompts' API.(Error: wis_30

Hi Gurus
Getting an error message while running a webi report from infoview link(server:8080/InfoViewApp/logon.jsp)
as
"An internal error occured while calling 'answerPrompts' API.(Error: ERR_WIS_30270)
I found that while selecting refresh checkbox in one of the query which is using .xls file from the local system this is showing above error while running from above link.
If it is unchecked it is running without any error.
while running report from webirichclient(where we are developing reports) it is running without any error.
Thanks in Advance
Regards
Ritu Raj

It seems you are on SP3, and I assume the operating system of the BO server is Windows based.
Please cross-check that the Excel version you have matches the ODBC driver in the supported platforms document for XI3.1 SP3 [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4079f8f6-2b49-2d10-d790-bc596012dc25]
Second thing, I would like to see screenshots of what you mean by
"I found that while selecting refresh checkbox in one of the query which is using .xls file from the local system this is showing above error while running from above link.
If it is unchecked it is running without any error."
just to avoid misunderstandings from my side
Thanks!
Best regards,
Simone

Internal Error occurred while calling the ProcessDPCommands API

We have installed Business Objects XI with MySQL. We are getting following error when we click on view query on the WEBI Reports
" Internal Error occurred while calling the ProcessDPCommands API Error WIS 30270".
When we change the CMS database to ORACLE everything works fine it looks like some issues when CMS database is MYSQL
Please hep to fix this problem
Installation is on Solaris 10
Edited by: AshishDatar on Nov 6, 2009 3:00 PM
Installation is on Solaris 10

did you check whether universe connection is pointing to the correct db?The following url might be helpful:
[http://www.forumtopics.com/busobj/viewtopic.php?t=52355&view=previous]

An internal error occurred while calling 'submitReport' API. (Error: ERR_WI

An internal error occurred while calling 'submitReport' API. (Error: ERR_WIS_30270)
We get above mentioned error message at any point in WebI Rich Client.
DataSource: Teradata 12.0 (Local machine)
BO XI 3.1 Client installed on local machine
Universe (Secured connection)
WebI : desiging and creating in Standlone mode
WebI client version : 12.1.0.882
Many times above written error is thrown 2-3 times even when we click on OK button and lastly followed by new error message:-
Unable to get the first page of the current report - Web Intelligence will switch to structure view (WIJ 20003).
Flow: We create report based on locally saved universe. There are couple of scenarios for which error comes
1) After successfully saving the report, reopen and refresh causes this error (1st error and 2nd)
2) Droping a properly written variable on measure column, if done Ctrl + Z, report works sometimes (both or 2nd error message)
3) Draging out the mesaure or dimension from report (only 2nd error)
Report is simple and no other stuff except the cross tab table
Even if we start with simply dropping the dimension and measures on report, 2nd error comes at any time.
What we noticed is that if we do all desiging in structure mode and then run instead of in result mode, reports works for more time.

You can have a look here:
Input Controls with Break Error on webi report
http://www.forumtopics.com/busobj/viewtopic.php?t=60789&postdays=0&postorder=asc&start=45
Re: internal error occurred while calling the 'submitReport' API.
I'm Back
HAPPY NEW YEAR

An internal error occured while calling 'processDPCommandsEx' API. (Error: ERR_WIS_30270)

Hi ALL,
I am facing a wierd issue while opening/refreshing/broadcasting a webi report.
The error message scrnshot:
This error is not throughout the reports, but for specific reports only, when checked the Bex query definition it works fine, but gives error for Webi reports.
Recently we had upgrade of BO 4.0 SP7 patch 9.
The reports are directly built on Bex queries, Bex queries contains simple Structures and few CKF's.
Would be thankful for any help recieved in resolving the above issue.
Regards,
Jaywant Kulkarni.

Hi jaywant,
Please check the note: 1760827 it may be helpful
( An internal error occurred while calling the 'processDPCommands' API. (ERR_WIS_30270) due to some scenarios.
Scenario 1:
Error occurs when try to refresh a migrated Web Intelligence report in InfoView, after entering a date or dates for prompts.
Suggested Solution:
Modify problematic report in Webi.
Change the prompt definition to be a constant, run the report in Webi, and save it.
Change the prompt definition back to prompt with required date definition. Make sure you are using the correct date format! (The report prompt should tell you what the format is supposed to be.) Re-run the report in Webi, and save it.
Re-open the report in InfoView and refresh.
Scenario 2: Error occurs when trying to edit the properties of a Webi report containing merged dimensions.
Suggested Solution:
Remove the merged dimensions and then re-establish them.
Scenario 3: Error occurs when the InfoView report has been open and idle for a long time.
Suggested Solution:
This error can be an indication of a time-out, based on the server’s settings. Make sure you save your work often. You will need to close and re-open the report when you get this error, and you may have lost any unsaved changes.

An internal error occured while calling 'getBlob' API. (error: ERR_WIS_3027

Hi Team,
Please help me in resolving the below error message.
One of my user is experiencing this when trying to run a report.
"An internal error occured while calling u2018getBlobu2019 API. (error: ERR_WIS_30270)". I have checked the previous discussion on the same, But I could not get it. Could some one help me as what I can do to resolve this.
Thanks in Advance
Mmvihar

Hi George Pertea,
Appreciate your prompt response.
I found a simple solution for this.
This error message occurs when the TOMCAT server memory exceeds more than 1.3 gb. Hence, restart the TOMCAT server would resolve this issue.
Here are the steps in detail.
1. Log into each server through either citrix, remote desktop or mstsc from run command.
2. Click on task Manager.
3. Click on process, if you find TOMCAT memory is more than 1.3 gb, come back to CCM and stop tomcat server.
4. Wait for 20 seconds and then start tomcat server. Check all the remaining servers and do the same
This resolved the issue.
Thanks & Regards
Mmvihar

An internal error occured while calling 'getBlob' API.(Error: ERR_WIS_30270

Hi,
I am using BOXI R3.1, when i open a Webi Report & getting one Error:
An internal error occured while calling 'getBlob' API. (Error: ERR_WIS_30270).
Do anyone know how to fix error?
Regards,

Hi,
this is an old thread..
There are a great many potential reasons for this problem.
I would recommend you use our Knowledge Base search on SMP - link here: http://service.sap.com/xsearch
.. and search for terms : webi 'getBlob' API
Also, some information about your Product version and Patch level is requiered.
Also, any explanation of workflow -
does it only happen when opening report?
are you using OpenDoc hyperlink navigation?
Moving between report tabs?
Are many Schedules running concurrently at that time ?
regards,
H

Error Message: An internal error occured while calling 'openDocumentMDP' AP

Hi,
I am working on BO XIR3.1,
we have two acceptence environment and we use the same liscense key for both the environment.
i am trying to schedule a report in the acceptence environment and my scheduling is geting failed.
due to the reason below
Server Used: XXXXXXXX.AdaptiveJobServer
PID: 3444
Parent Object Path: Cust Reports/
Remote Instance in Federated Cluster: No
Expiry: 2/16/2022 8:59 AM
Formats: Web Intelligence
Parameters:
Error Message: An internal error occured while calling 'openDocumentMDP' API. (Error: ERR_WIS_30270) .
it is a very urgent issue ,kindly help me out to solve this issue.

Thanks Amith,
You are getting error in all reports or particular report?
All the reports
These reports are migrated from one environment to other?
No,it was created in the same environment
what is the BO SP level?
SP 1
restart the SIA and then schedule report and see you are getting error or not?
I had done this ,and i am geting the same error.
Kindly help me out with a solution.
Regards
S.Cyril

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

TF215097: An error occurred while initializing a build for build definition : Could not establish trust relationship for the SSL/TLS secure channel

Hello,
We are facing an issue when triggering a new build using TFS 2013 Update 4, VS2013 Update 4 using TFVCTemplate.12.XAML template. All our other older build definitions just work fine but not the TFVCTemplate.12.XAML. It seems to me that some certificate
might be invalidated. Can anyone please point me in the right direction?
Thanks,
Mitul
TF215097: An error occurred while initializing a build for build definition :
Exception Message: One or more errors occurred. (type AggregateException)
Exception Stack Trace: at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFile(TfsTeamProjectCollection projectCollection, String itemPath, Stream outputStream)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFileAsString(TfsTeamProjectCollection projectCollection, String itemPath)
at Microsoft.TeamFoundation.Build.Client.ProcessTemplate.Download(String sourceGetVersion)
at Microsoft.TeamFoundation.Build.Hosting.BuildControllerWorkflowManager.PrepareRequestForBuild(WorkflowManagerActivity activity, IBuildDetail build, WorkflowRequest request, IDictionary`2 dataContext)
at Microsoft.TeamFoundation.Build.Hosting.BuildWorkflowManager.TryStartWorkflow(WorkflowRequest request, WorkflowManagerActivity activity, BuildWorkflowInstance& workflowInstance, Exception& error, Boolean& syncLockTaken)
Inner Exception Details:
Exception Message: An error occurred while sending the request. (type HttpRequestException)
Exception Stack Trace: at Microsoft.VisualStudio.Services.WebApi.VssHttpRetryMessageHandler.<SendAsync>d__1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.ConfiguredTaskAwaitable`1.ConfiguredTaskAwaiter.GetResult()
at Microsoft.VisualStudio.Services.WebApi.HttpClientExtensions.<DownloadFileFromTfsAsync>d__2.MoveNext()
Inner Exception Details:
Exception Message: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. (type WebException)Exception Stack Trace: at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
Inner Exception Details:
Exception Message: The remote certificate is invalid according to the validation procedure. (type AuthenticationException)
Exception Stack Trace: at System.Net.TlsStream.EndWrite(IAsyncResult asyncResult)
at System.Net.ConnectStream.WriteHeadersCallback(IAsyncResult ar)

Hi Mitul,
Thanks for your reply.
It’s strange, if your old build definitions can work using the same TFS Build Server, that indicate your TFS Server configuration is correct and can works. But only new build definition with default TfvcTemplate.12.xaml template cannot build successful.
Please share your TFS Server detailed environment information here. And share your
Build Service Properties dialog screenshot here.
Try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself):
Clean the Cache folder on Server machine. The folder path is:
C:\Program Files\Microsoft Team Foundation Server 12.0\Application Tier\Web Services\_tfs_data.
After cleaned, on Server machine, click Start and select
Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
Additionally, you can run the TFS 2013 Power Tools BPA to scan the installation of your TFS Server.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error occurred while forwarding a message for distributed destination

Is there a change in the way that Uniform Distributed Destinations are handled in the cluster after weblogic9.2?
I am using oracle weblogic 10.3.0.1 in production mode. I have two managed servers, each managed server has a JMS Server.
I create a Uniform distributed Topic on the System module, and publish a message to it.
I can see the message in the topic on the first JMSServer but the following error happens and the message never makes it to the second JMSServer
<Sep 24, 2009 2:00:45 PM GMT+00:00> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Sep 24, 2009 2:00:45 PM GMT+00:00> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
<Sep 24, 2009 2:00:45 PM GMT+00:00> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on IP:PORT for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 24, 2009 2:00:45 PM GMT+00:00> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "ManSvr1" for domain "Domain" running in Production Mode>
<Sep 24, 2009 2:00:46 PM GMT+00:00> <Notice> <Cluster> <BEA-000102> <Joining cluster Clus on mip:mport>
<Sep 24, 2009 2:00:47 PM GMT+00:00> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Sep 24, 2009 2:00:47 PM GMT+00:00> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Sep 24, 2009 2:09:52 PM GMT+00:00> <Warning> <JMS> <BEA-040498> <An error occurred while forwarding a message for distributed destination member JMSSystemResource!JMSServer2@example: weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteException: Could not establish a connection with 8935413426058515615S:fqhn:[-1,-1,sslport,sslport,-1,-1,-1]:Domain:ManSvr2, java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):fqhn:nonsslport:null:-1'; No available router to destination; nested exception is:
java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):fqhn:nonsslport:null:-1'; No available router to destination; nested exception is:
java.rmi.ConnectException: Could not establish a connection with 8935413426058515615S:fqhn:[-1,-1,sslport,sslport,-1,-1,-1]:Domain:ManSvr2, java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):fqhn:nonsslport:null:-1'; No available router to destination; nested exception is:

I specified the cluster address, but still get the following errors after a message is published to the topic. Are there other configuration items that can be checked?
<Sep 29, 2009 9:51:49 AM GMT+00:00> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Sep 29, 2009 9:52:01 AM GMT+00:00> <Notice> <Server> <BEA-002613> <Channel "DefaultAdministration" is now listening on 10.241.134.92:7018
for protocols admin, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 29, 2009 9:53:26 AM GMT+00:00> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.241.134.92:7019 for
protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 29, 2009 9:53:26 AM GMT+00:00> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "ClusManSv
r2" for domain "domain" running in Production Mode>
<Sep 29, 2009 9:53:26 AM GMT+00:00> <Notice> <Cluster> <BEA-000102> <Joining cluster Clus on 224.0.0.10:7390>
<Sep 29, 2009 9:53:27 AM GMT+00:00> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Sep 29, 2009 9:53:27 AM GMT+00:00> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Sep 29, 2009 9:56:14 AM GMT+00:00> <Warning> <JMS> <BEA-040498> <An error occurred while forwarding a message for distributed destinati
on member SOAFJMSSystemResource!SOAFJMSServer1@EventingAdminTopic: weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteExc
eption: Could not establish a connection with 5660061832836428941S:managedServer.net:[-1,-1,7017,7017,-1,-1,-1]:testnn
2092.net:domain:ClusManSvr1, java.rmi.ConnectException: No known valid port for: 'Def
ault[t3]:t3(t3):managedServer.net:7018:null:-1'; No available router to destination; nested exception is:
java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; No ava
ilable router to destination; nested exception is:
java.rmi.ConnectException: Could not establish a connection with 5660061832836428941S:managedServer.net:[-1,-1,1
1217,7017,-1,-1,-1]:managedServer.net:domain:ClusManSvr1, java.rmi.ConnectException: No
known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; No available router to destination; nested
exception is:
java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; No ava
ilable router to destination
weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteException: Could not establish a connection with 5660061832836428941S:
managedServer.net:[-1,-1,7017,7017,-1,-1,-1]:managedServer.net:domain:
ClusManSvr1, java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; N
o available router to destination; nested exception is:
java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; No ava
ilable router to destination; nested exception is:
java.rmi.ConnectException: Could not establish a connection with 5660061832836428941S:managedServer.net:[-1,-1,1
1217,7017,-1,-1,-1]:managedServer.net:domain:ClusManSvr1, java.rmi.ConnectException: No
known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; No available router to destination; nested
exception is:
java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; No ava
ilable router to destination
at weblogic.messaging.dispatcher.DispatcherWrapperState.dispatchAsync(DispatcherWrapperState.java:158)
at weblogic.jms.dispatcher.DispatcherAdapter.dispatchAsync(DispatcherAdapter.java:84)
at weblogic.jms.backend.BEForwardingConsumer$1.run(BEForwardingConsumer.java:503)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.jms.backend.BEForwardingConsumer.processMessages(BEForwardingConsumer.java:499)
Truncated. see log file for complete stacktrace
java.rmi.RemoteException: Could not establish a connection with 5660061832836428941S:managedServer.net:[-1,-1,7017,701
7,-1,-1,-1]:managedServer.net:domain:ClusManSvr1, java.rmi.ConnectException: No known v

JMSAn error occurred while forwarding a message for distributed destination

Hi,
i have getting issue with JMS Server delivery fail, below is the errors
####<Aug 24, 2012 2:03:54 PM CDT> <Warning> <JMS> < <[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default
(self-tuning)'> <<WLS Kernel>> <BEA1-0979336B7FF44582D27D> <> <1345835034568> <BEA-040498> <An error occurred while forwarding a message for distribute
d destination member SystemModule-0!d4a JMS Server@D Distributed Topic: weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteExcepti
on: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:d:d4a, java.rmi.ConnectException: Destina
tion unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:d:d4a, jav
a.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination
weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[
8011,8011,-1,-1,-1,-1,-1]:d:d4a, java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:d:d4a, jav
a.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination
at weblogic.messaging.dispatcher.DispatcherWrapperState.dispatchAsync(DispatcherWrapperState.java:155)
at weblogic.jms.dispatcher.DispatcherAdapter.dispatchAsync(DispatcherAdapter.java:84)
at weblogic.jms.backend.BEForwardingConsumer$1.run(BEForwardingConsumer.java:492)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.jms.backend.BEForwardingConsumer.processMessages(BEForwardingConsumer.java:488)
at weblogic.jms.backend.BEForwardingConsumer.pushMessages(BEForwardingConsumer.java:300)
at weblogic.messaging.util.DeliveryList.run(DeliveryList.java:256)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
java.rmi.RemoteException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:d:d4a, java.rmi.Con
nectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:ds:ds4a, jav
a.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
####<Aug 24, 2012 2:03:54 PM CDT> <Warning> <JMS> <dal604se113com> <a> <[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default
(self-tuning)'> <<WLS Kernel>> <BEA1-0979336B7FF44582D27D> <> <1345835034568> <BEA-040498> <An error occurred while forwarding a message for distribute
d destination member SystemModule-0!d4a JMS Server@D Distributed Topic: weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteExcepti
on: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:ds:ds4a, java.rmi.ConnectException: Destina
tion unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:dsa, jav
a.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination
weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[
8011,8011,-1,-1,-1,-1,-1]:ds:ds4a, java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:ds:ds4a, jav
a.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination
at weblogic.messaging.dispatcher.DispatcherWrapperState.dispatchAsync(DispatcherWrapperState.java:155)
at weblogic.jms.dispatcher.DispatcherAdapter.dispatchAsync(DispatcherAdapter.java:84)
at weblogic.jms.backend.BEForwardingConsumer$1.run(BEForwardingConsumer.java:492)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.jms.backend.BEForwardingConsumer.processMessages(BEForwardingConsumer.java:488)
at weblogic.jms.backend.BEForwardingConsumer.pushMessages(BEForwardingConsumer.java:300)
at weblogic.messaging.util.DeliveryList.run(DeliveryList.java:256)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
java.rmi.RemoteException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:ds:ds4a, java.rmi.Con
nectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:ds:ds4a, jav
a.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
Edited by: Ikhan on Aug 29, 2012 4:00 AM
Edited by: Ikhan on Aug 29, 2012 4:01 AM

The distributed topic forwarders replicate messages to every member of a "replicated distributed topic". They will report errors if intra-cluster communication is interrupted or if servers in the cluster shut down. I recommend checking your server logs to see if other errors/warnings exist, and, if you suspect an intra-cluster communication problem, consulting the cluster troubleshooting guide(s) in the edoc.
Most newer apps (apps hosted on versions 10.3.4 or higher) should consider using the new "partitioned distributed topics" instead of "replicated distributed topics". These don't use forwarders and scale better.
HTH,
Tom

Please help me resolve the Lync server 2013 deployment error: "An error occurred while applying SQL script for the feature BackendStore."

I am getting an error in "Step 2 - Setup or Remove Lync Server Components" of "Install or Update Lync Server System" step.
"An error occured while applying SQL script for the feature BackendStore. For details, see the log file...."
Additionally, all previous steps such as: Prepare Active Directory, Prepare first Standard Edition server, Install Administrative Tools, Create and publish topology are done without any errors. The user that I used to setup the Lync server is member of:
Administrators
CSAdministrator
Domain Admins
Domain Users
Enterprise Admins
Group Policy Creator Owners
RTCComponentUniversalServices
RTCHSUniversalServices
RTCUniversalConfigReplicator
RTCUniversalServerAdmins
Schema Admins
I have tried to re-install all the things and started to setup a new one many times but the same error still occurred. Please see the log below and give me any ideas/solutions to tackle this problem.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Initializing DbSetupBase
Parsing parameters...
Found Parameter: SqlServer Value lync.lctbu.com\rtc.
Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
Found Parameter: Publisheracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Administrators;LCTBU\RTCUniversalServerAdmins.
Found Parameter: Replicatoracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
Found Parameter: Consumeracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Read-only Administrators;LCTBU\RTCUniversalReadOnlyAdmins.
Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
Found Parameter: Role Value master.
Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 2100.
Sql version is acceptable.
Validating parameters...
DbName rtcxds validated.
SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
DbFileBase rtcxds validated.
DbPath D:\CsData\BackendStore\rtc\DbPath validated.
Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
LogPath D:\CsData\BackendStore\rtc\LogPath validated.
Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
Checking state for database rtcxds.
Checking state for database rtcxds.
State of database rtcxds is detached.
Attaching database rtcxds from Data Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath, Log Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
The operation failed because of missing file '\\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath\rtcxds.mdf'
Attaching database failed because one of the files not found. The database will be created.
State of database rtcxds is DbState_DoesNotExist.
Creating database rtcxds from scratch. Data File Path = D:\CsData\BackendStore\rtc\DbPath, Log File Path= D:\CsData\BackendStore\rtc\LogPath.
Clean installing database rtcxds.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
Initializing DbSetupBase
Parsing parameters...
Found Parameter: SqlServer Value lync.lctbu.com\rtc.
Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
Found Parameter: Serveracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 2100.
Sql version is acceptable.
Validating parameters...
DbName rtcshared validated.
SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
DbFileBase rtcshared validated.
DbPath D:\CsData\BackendStore\rtc\DbPath validated.
Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
LogPath D:\CsData\BackendStore\rtc\LogPath validated.
Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
Checking state for database rtcshared.
Reading database version for database rtcshared.
Database version for database rtcshared - Schema Version5, Sproc Version 0, Update Version 1.
Thanks and Regards,
Thanh Le

Thanks Lạc
Phạm 2
I Had similar issue i end up uninstalling and reinstallting but same issue, then i change the drive but same issue. It was I/O issue. After adjusting my I/O it fix our issue and installation went on without any issue.
If any one using KVM here is detail article
We just give this option cache=‘writeback
using this article http://www.ducea.com/2011/07/06/howto-improve-io-performance-for-kvm-guests/ and http://itscblog.tamu.edu/improve-disk-io-performance-in-kvm/ this fix my issue thanks

Error while executing the Job for Objects :null Batch Risk Analysis

Hi All,
We've recently upgraded Virsa to version 5.3_14 . I'm encountering a problem when executing the Batch Risk Analysis job for users, roles and profiles. The job does not complete for some objects and it seems to be sporadic and shows this error: -
Background Job History: job id=395, status=2, message=Error while executing the Job for Object(s) :ABROWN:null
I've attached the log for your review.
Thanks in advance for your help.
Linda Lewis
Feb 9, 2011 1:47:53 PM com.virsa.cc.xsys.meng.ObjAuthMatcher <init>
FINEST: ObjAuthMatcher constructed: 4ms, #singles=2141, #ranges=0, #super=0
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.riskanalysis.AnalysisEngine riskAnalysis
WARNING: Job ID:395 : Failed to run Risk Analysis
java.lang.StringIndexOutOfBoundsException at java.lang.String.substring(String.java:1019)
at com.virsa.cc.xsys.util.RuleLoader.getPermRule(RuleLoader.java:573)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1609)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:321)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchRiskAnalysis(BatchRiskAnalysis.java:1166)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1464)
at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:560)
at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:363)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:375)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:92)
at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:444)
at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1236)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:207)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
FINEST: Lock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock unlock
FINEST: Unlock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchRiskAnalysis
WARNING: Error: while executing BatchRiskAnalysis for JobId=395 and object(s):ABROWN: Skipping error to continue with next object: null Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
2@@Msg is Error while executing the Job for Object(s) :ABROWN:null
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=395, status=2, message=Error while executing the Job for Object(s) :ABROWN:null
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
FINEST: Lock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock unlock
FINEST: Unlock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchRiskAnalysis
INFO: --- BKG User Permission Analysis (System: P20:020) completed --- elapsed time: 4522 ms
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
Edited by: Linda Lewis on Feb 9, 2011 9:08 PM

Hi,
Was a solution found for this error?
Thanks,
Glen

An error occurred while loading the model for the item or data source 'EntityDataSource'.

Hi Team,
We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
“An error occurred while loading the model for the item or data source
'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
Installed SharePoint Server 2013 Enterprise edition
Did not configure it at this time
Installed SQL Server 2012 with default instance installation (selected every features)
Later installed SP1 for SQL Server 2012
After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
Again installed another Analysis Server and selected the tabular mode of data model
Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances.
Questions/Doubts are:
Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
CTP3 software for Power View feature as mentioned in the below link.
http://technet.microsoft.com/en-us/library/jj219634.aspx
but we don’t have an option to download CTP3 software now from Microsoft site
Or do we need to install
Microsoft SQL Server 2012 With Power View For Multidimensional Models
CTP
http://www.microsoft.com/en-sg/download/details.aspx?id=35822
Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
http://www.microsoft.com/en-in/download/details.aspx?id=35575
Error detail :
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Please help me in configuring Power View for SharePoint 2013.
Thanks in advance.
Pavan Kumar

I'll bet that I know the answer to this one - and you probably won't like it ;)
Here's the telling portion of that error: "We cannot locate a server to load the workbook Data Model."
This error is thrown in two scenarios; the first, when you haven't registered an analysis server. The second appears to be the issue you're having:
PowerPivot requires SQL Server 2012 SP1. Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
Check the version of SQL that you are running. It should be version 11.0.3000 or greater. If it's not, you have the wrong "SP1" installed. The correct one is
here.
Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed. You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
the databases. Once you've done that, PowerPivot and PowerView will work properly.
I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem!

JMS sender cc error: Error while calling operation 'setChannel' for object

Similar Messages

Maybe you are looking for