JNI generated header file does not match the class file

We have had a JNI project for many years and all has been fine. Within our libraries we have several classes that have inner enum classes.
Recently we have moved to JDK1.7. Up to now when JNI generated the methods where the signature used the inner enum class, and it was an oveloaded method, we would get something like the following as the signature:
Java_PackageName_ClassName_methodName_OuterClass_00024InnerEnum_2
And the class file result of the build would look like the following:
methodName(OuterClass$InnerEnum)
Since we have moved to JDK 1.7 the header file looks like the following:
Java_PackageName_ClassName_methodName_OuterClasss_InnerEnum_2
The class file is still the same, and because of that when we run the program we get an UnsatisfiedLinkError. I understand that this error is because the VM cannot find the implementation. So why JDK 1.7 generates a header file that does not match the class file?
Thank you in advance.

I don't have 1.6 to verify but your statements about what is generated for 1.7 for the header appear correct.
The 000024 represents the '$' and for 1.7 the inner class is still named using '$'. So for example after compiling in 1.7 the inner class file is named the following...
MyClass$InnerEnum.class
So a one to one conversion should have kept the 000024 (presuming it does in fact do it that way in 1.6.)
You might want to look at the release notes for 1.7.
If you need a solution you could add a post javah step that renames the file.

Similar Messages

  • The file may be corrupt. The file header checksum does not match the computed checksum.

    I just put Vista Home Premium on a computer I was going to give to my son. Upon adding some hardware I kept getting the above screen. "The file may be corrupt. The file header checksum does not match the computed checksum.' When I booted in safe mode and slow boot, it hung on crcdisk.sys. I removed everything except the keyboard hhd dvd and fdd and it still does the same thing. I tried to reinstall Vista but it keeps hanging. From reading a lot of other threads this seems to be a big problem. I doubt if the product should have been marketed. But.... If anyone can help me get it booted I would like to try XP instead. I tried to install XP on the same drive and it hungs there too.

    Hi ballen6721,
    Thank you for the post.
    This issue can occur if the newly installed hardware device is incompatible with the system.
    Based on the current situation, I suggest trying the following steps to troubleshoot the issue:
    Method 1 Device Clean Boot
    ============================================
    Please unplug all unnecessary devices such as sound card, printer, network card and TV card.
    Method 2: Startup Repair from the Windows Recovery Environment (WinRE)
    ============================================
    1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
    2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
    3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
    4. Click Repair your computer.
    5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.
    6. At the System Recovery Options Dialog Box, click on Repair your computer.
    7. Click the operating system that you want to repair, and then click Next.
    8. In the System Recovery Options dialog box, click Startup Repair.
    Method 3: Use the Windows Recovery Environment (WinRE) to run System Restore ============================================
    1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
    2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
    3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
    4. Click Repair your computer.
    5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next
    6. At the System Recovery Options Dialog Box, click on System Restore.
    7. Follow the System Restore Wizard instruction and choose the appropriate restore point.
    8. Click Finish to restore the system.
    Note: If you computer is an OEM one, the method to enter WinRE can be different, you may contact your OEM to consult how to enter WinRE.
    Can we start the computer now?
    If the issue persists, please help confirm the following points:
    1. What hardware changes have you made recently?
    2. Can we enter Safe Mode now?
    I look forward to hearing from you.
    Best regards,
    Tim Quan
    Microsoft Online Community Support

  • "the file header checksum does not match the computer checksum." Pavilion P6000

    HP Pavilion P6000
    Windows 7 64-bit
    The file is possible corrupt.  The file header checksum does not match the computer checksum
    I was previously getting blue screens saying things like "Memory_Management"

    I see you have damaged both your hardrive(hardware) and your operating sytem (corrupted too, software)
    You may want to run an diagonstic test of your hard drive complete before trying to reinstall windows.
    Press ESC right after power button and repeatdley and look for Diagnostic test and start up test and hard drive test.
    Please report results.
    Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
    **Click the White thumb if you like the answer.**
    **Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
    Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

  • Selected file cannot be linked because its type (video) does not match the original file's type

    I've been using Premiere Elements 9 for a couple of years now, and a few months ago I began having problems importing AVI files created from a BlackMagic Intensity Pro capture card.  (These issues were not previously occurring, and since they surfaced, I have exhausted the various settings for the BlackMagic card, used various software such as BlackMagic's own Media Express as well as the freeware VirtualDub, and still have the following problems.)
    In addition, these AVI files play just fine, in their entirety, using Windows Media Player and in Quicktime.
    The problem (or possibly two, but I suspect they could be related) is that most of the AVI files I attempt to import will either (1) import all video and NO audio, or (2) import ONLY a short segment of audio and video, and the length that Elements imports varies.  Usually only in the range of a minute or two.  The rest of the file is not imported at all.
    After much digging in forums, and testing various settings in trying to figure out the issue, I decided to back up all of my files and completely wipe all hard drives and start over with a fresh installation of Windows and Premiere Elements 9.  I haven't installed much else yet, as I wanted to first find out if the reinstallation improved things with Elements.
    For the first project I created in Elements after the reinstallation, Elements successfully imported an entire AVI that was nearly 2 hours long, audio and video.  This was a file that previously would not import properly into Elements.  This suggested that my earlier installation of Elements must have been corrupted somehow.  At this point I was very hopeful that all was well.
    I proceeded to edit the video as I had wanted, saved the project, and exported it to an MPEG format file.  I had originally wanted to export it as an MOV, but I hadn't yet installed Quicktime, so Elements couldn't do that just yet.  The MPEG export was successful and plays fine.
    However, I then installed Quicktime, and once it was finished, I restarted the PC and reloaded the same project.  This time, Elements claimed the media was offline.  I double-clicked on a segment of the video, and directed Elements to the raw file, but then an error message popped up:  "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)."  This was the same file I had JUST edited and of which I created an MPEG.
    I tried creating a new project and the "Get Media" function to import the AVI again, but this time only the video imported with NO audio.  (This would explain why the error message said what it did, but not why the audio wasn't imported.)
    What in the world is going on with Elements???  I am baffled since the ONLY task I have done on this machine after a complete reinstallation of both Windows and Elements is edit one AVI.  I find it very hard to believe that just installing Quicktime caused this.
    Some info on my system:
    System:  Asus P6T w/ Intel i7 920 and 12 GB memory
    OS: Windows 7 Ultimate
    Video Software:  Premiere Elements 9
    Capture Card:  BlackMagic Intensity Pro (PCI-e)
    Capture Software:  AVIs recorded with either BlackMagic Media Express or VirtualDub (only prior to the reinstallation, as neither of these programs are currently installed)
    I'm getting to the point with Elements that I might need to just abandon it and find something else that is more reliable.  Anybody have suggestions to help with this, so I won't have to migrate?

    mtnsports
    We think that we need to start off with definiting the properties of these .avi files that you are importing into Premiere Elements 9.0/9.0.1 (assumed that you are working for the required 9.0.1 Update).
    You say that the "avi" was created from a "BlackMagic Intensity Pro capture card". What are the properties of this .avi that you imported into Premiere Elements? Not all .avi are created equal. What is the video and audio compression, frame size, frame rate, interlaced or progressive, pixel aspect ratio, typical duration?
    Based on the properties of the video what have you been setting as the project preset?
    Let us start here.
    More later.
    ATR

  • Planning Quick Win Error: Registration file does not match the app version.

    Gents,
    I have a Fusion 11.1.2 install on a Windows 2003 server environment.
    After creating the Planning App in Classic mode, I logged back in to Initialize the App... and I got this.
    This occurred when I tried to log on to the Planning App in Workspace. (I was about to go Create/Refresh the app) :
    "An error occurred while processing this page. Check the log for details.Please close the current tab and open application again. Single Sign on Validation failed"
    The SharedServices_Security.log goes as follows:
    2009-05-12 16:08:11,437 ERROR [http-28080-Processor3] com.hyperion.css.common.CSSUtils.checkValidArgument(Unknown Source) -- 26:1002:Invalid value for identity. Enter a valid value.
    2009-05-12 16:08:11,468 WARN [http-28080-Processor3] com.hyperion.css.spi.impl.nv.NativeProvider.getHierarchicalRoleTree(Unknown Source) -- Exception getting Child Roles in hierarchy [Root Cause: 26:1002:Invalid value for identity. Enter a valid value. ]
    2008-05-12 16:42:47,781 WARN [http-28080-Processor9] com.hyperion.css.spi.impl.nv.XMLRoleRegDocumentModel.recurseDocumentTree(Unknown Source) -- The Product 'Hyperion Planning' Version 'HP-9.5.0' in the Registration file does not match the application version '9.5.0'
    Any suggestions?
    Thanks.
    Eric.

    Hi,
    If you are running on a Microsoft OS, have a look the log :- :\Hyperion\logs\services\HyS9Planning-sysout.log
    Not sure how much information it will give though.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • CS5 The selected file cannot be linked because its type (audio) does not match the original file's t

    Greetings,
    I have been working on a very large project using CS5 on my desktop computer. Now I am on the road and bought a laptop so that I can continue to work. I placed all of my assets on a back-up external 2tb drive (which I was able to open without incident on my desktop). I installed CS5 on my new laptop and now when I try to open the project I get the following message "The selected file cannot be linked because its type (audio) does not match the original file's type (audio and video)". This message appears before I indicate the path to any of the assets. Then, when I do indicate the path to each asset, I get the same message for individual files.
    Any advice is appreciated.
    Thanks,
    Jeremy

    I had this problem and have found a solution / workaround:  my issue was when trying to open a cs5 project that had been collected on mac and then transfered to pc, my footage was all png image sequences but this will hopefully work in other situations...
    Open the project and cancel the first dialogue box that pops up where you get the "file cannot be linked" error when trying to reconnect footage.  The project will open and then in the project panel, right click on any footage that needs reconnected and choose "Replace footage..." this will open a dialog that will allow you to select the file that gave you the error in the first place without any issues.  Any sequences with that footage will now work and everything show be all good. 
    You may experience "Offline material is present in this export and will be encoded using the offline media graphic" on first export but apparently you can just ingore that, but i guess it's woth testing a few short sections before commiting to a huge render...
    This workaround isn't perfect as i had about 50 pieces of footage i had to relink via this method one by one but at least it saved redoing the edit which was critical for my project...
    good luck!

  • File sizes listed does not match the downloaded files

    I am trying to download 92010NT from this page http://www.oracle.com/technology/software/products/oracle9i/htdocs/winsoft.html but the file sizes listed does not match the downloaded files. Is there any other page where I can download 92010NT.

    I am trying to download 92010NT from this page http://www.oracle.com/technology/software/products/oracle9i/htdocs/winsoft.html but the file sizes listed does not match the downloaded files. Is there any other page where I can download 92010NT.

  • "The class being compiled does not match the class that was imported"

    ----------Actions on timeline in
    sixSpices/updateSite/updateSite.fla----------
    import com.sixspices.updater.view.*;
    var calDrawer:CalendarView = new CalendarView(); //Listener /
    view
    ----------sixSpices/com/sixspices/updater/view/CalendarView.as
    file----------
    class CalendarView {
    public function CalendarView(){
    public function onRecieveData(listOfEvents:Array) {
    displayEvents(listOfEvents);
    public function displayEvents(listOfEvents:Array):Void {
    trace(listOfEvents);
    When I test the movie (updateSite.swf) in flash, it gives me
    the error:
    The class being compiled, 'CalendarView', does not match the
    class that was imported,
    'com.sixspices.updater.view.CalendarView'.

    Here is my file structure:
    sixSpices
    -->updateSite
    -->-->updateSite.fla
    -->-->updateSite.swf
    -->com
    -->-->sixSpices
    -->-->-->updater
    -->-->-->-->view
    -->-->-->-->-->Calendar.as
    If I move updateSite.fla to the folder sixSpices so that
    "com" is in the same folder as it, I get the same error.
    The following works with no problems (no similar error):
    ----------Actions on timeline in
    sixSpices/updateSite/updateSite.fla----------
    import com.sixspices.updater.model.*;
    var calModel:CalendarOverview = new CalendarOverview();
    //Broadcaster / model
    ----------sixSpices/com/sixspices/updater/model/CalendarOverview.as
    file----------
    import com.sixspices.updater.model.*;
    import mx.utils.Delegate;
    import mx.events.EventDispatcher;
    class CalendarOverview {
    public function CalendarOverview(){
    }

  • Error : the class does not match the class of the persisted object

    Hi I am new to Java.. I got an exception "the class does not match the class of the persisted object for cl = java.util.Vector : __SUID = -2767605614048989439, getSUID(cl) = 1".. What it implies? I got Serialized stream and Object from Web Server.. How to resolve this Exception? I nead to Deserialize this stream...

    ArulPrabhu wrote:
    Friend... I agree with u... Every thing Ok... I am not having the option to make change on the server side... I call a webrequest for the URI - "http://www.nseindia.com/chartdata?mkttype=N&series=EQ&symbol=RPOWER&charttype=ONLINE_STOCK".. From that i got response as Serialized Object Stream... Which is the data made available to all through their applet "Chart".. But i need it for my Custom Project.. I know the Structure of class they have serialized... Is their any chance to parce Data from that Stream..
    Three words.
    You are doomed.
    Whatever you end up doing will not be serialization. It will be reverse engineering of a old (dead) format that could go all pear shaped on you when you least expect it. One of the worst problems in using a solution where you reverse engineer, try and guess hackery your way through a proprietary semi (or totally) undocumented format is that it is really impossible to test your code with any degree of certainty. Does your code actually work? Or does it only work because you haven't seen some totally unexpected (but legal for the format) format yet?
    Get the producer to produce XML instead of "serialized" data. This is a much better route for you to go down.
    If you decide to keep on your path then grab a DataInputStream and go somewhere else because you'll have to figure out the format of another languages serialized data on a place that isn't this site.

  • CS6 The selected file cannot be linked because its type (audio) does not match the original file's t

    I understand there is another posting in this forum with the same error happening on CS5 and their solution had something to do with Quicktime.  Mine has nothing to do with this.
    I ran into this exact same problem in CS6 and I found that the issue is because I renamed the root project folder.  My folder structure is like this:
    Drive C:\
      -> [root project folder]
                -> [folder containing videos]
                -> MyProject.prproj
    By renaming the root project folder, I was no longer able to open up the project successfully.  It would get to certain clips and ask about where the clip was located.  Trying to re-link it to the correct file would result in that error (which makes no sense if you think about it).
    So my question is, is it intentional that the absolute folder paths are saved into the project file rather than relative paths?  Does it not make more sense if paths were saved relative to the root project path?  That way the root project folder could be renamed to whatever you want and it would have no effect on the project itself.

    I had this problem and have found a solution / workaround:  my issue was when trying to open a cs5 project that had been collected on mac and then transfered to pc, my footage was all png image sequences but this will hopefully work in other situations...
    Open the project and cancel the first dialogue box that pops up where you get the "file cannot be linked" error when trying to reconnect footage.  The project will open and then in the project panel, right click on any footage that needs reconnected and choose "Replace footage..." this will open a dialog that will allow you to select the file that gave you the error in the first place without any issues.  Any sequences with that footage will now work and everything show be all good. 
    You may experience "Offline material is present in this export and will be encoded using the offline media graphic" on first export but apparently you can just ingore that, but i guess it's woth testing a few short sections before commiting to a huge render...
    This workaround isn't perfect as i had about 50 pieces of footage i had to relink via this method one by one but at least it saved redoing the edit which was critical for my project...
    good luck!

  • "The file is possibly corrupt. The file header checksum does not match the computed checksum."

    Yesterday evening, I accidentally dropped my Probook 6565b. It bluescreened with strange red boxes around the text, so I thought the screen or something was damaged. I emergency shut down the computer, and started it up again. It was visibly slower, but I was able to use it, so, relieved, I turned it off again and went to bed.
    This morning, I tried to turn it on again. It started out normally (and I am able to access the start up screen) . But afterwards, it gives me a blank dark blue screen (like before you see the Windows logo) and it stays there for around 15 seconds before it gives me the error.
    I have no idea what to do, so any advice would be greatly appreciated!
    I think my operating system is Windows 7, but I'm not sure.
    Thank you.

    I see you have damaged both your hardrive(hardware) and your operating sytem (corrupted too, software)
    You may want to run an diagonstic test of your hard drive complete before trying to reinstall windows.
    Press ESC right after power button and repeatdley and look for Diagnostic test and start up test and hard drive test.
    Please report results.
    Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
    **Click the White thumb if you like the answer.**
    **Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
    Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

  • Iphone 4 file size does not match the ACTUAL file size

    My iphone 4 is reading 27 gigs of music as over 29 gigs of music. I don't understand why. Anyone else having an issue like this? My 3gs reads it as 27 gigs and so does my computer. I even set my 3gs to sync off a backup of my iphone 4 and it reads it as 2 less gigs. Why?

    Don't know, though Apple has been known to play with the numbers a bit:
    http://www.tuaw.com/2009/08/29/snow-leopard-the-new-one-gigabyte-now-slimmer-tha n-before/
    Or you could have had a conversion box checked in iTunes when you loaded your IPh4
    Phil

  • Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040

    Please assist I am on a Windows 7 64 bit machine I have VS 2010 and have been fighting with this new program that I was brought on to help with - Issue is that I am unable to get rid of this issue. There is so many solutions but none have worked. If someone can give me some help with what has worked for you.
    The error is Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
    This is with CR installed on 64 bit.
    Thank you very much for any assistance with this problem,
    Kris

    Hi Vittorio
    Please enter the search string 'log4net crystal net' into the search box in the top right corner. When the results come up, click on the Support Notes link. That will filter for the KBAs that you want to have a look at.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)

    Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
    ===========================================================
    This is a SQL Server 2012 Developer Edition of SSRS.
    I am getting this error when navigating to http://servername/Reports. The reports site was working fine, until I installed a SQL 2014 Developer instance (including SSRS) on the same server.
    I can still get to the http://servername/ReportServer site.
    Neither of these are using Sharepoint.
    Any help resolving this issue would be greatly appreciated.
    Below is the stack trace.
    ===========================================================
    [FileLoadException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Reflection.Assembly._nLoad(AssemblyName
    fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0 System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity,
    StackCrawlMark& stackMark, Boolean forIntrospection) +416 System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +166 System.Reflection.Assembly.Load(String
    assemblyString) +35 System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +190 [ConfigurationErrorsException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel'
    or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +1149
    System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +323 System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +116 System.Web.Configuration.AssemblyInfo.get_AssemblyInternal() +36 System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection
    compConfig) +212 System.Web.Compilation.WebDirectoryBatchCompiler..ctor(VirtualDirectory vdir) +174 System.Web.Compilation.BuildManager.BatchCompileWebDirectoryInternal(VirtualDirectory vdir, Boolean ignoreErrors) +57 System.Web.Compilation.BuildManager.CompileWebFile(VirtualPath
    virtualPath) +295 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +482 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext
    context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +108 System.Web.Compilation.BuildManager.GetVirtualPathObjectFactory(VirtualPath virtualPath, HttpContext context, Boolean allowCrossApp, Boolean
    noAssert) +171 System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +52 System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext
    context, String requestType, VirtualPath virtualPath, String physicalPath) +53 System.Web.HttpApplication.MapHttpHandler(HttpContext context, String requestType, VirtualPath path, String pathTranslated, Boolean useAppConfig) +519 System.Web.MapHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
    +176 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +274
    ===========================================================

    Hi Glen,
    "The located assembly's manifest definition does not match the assembly reference." is generally caused by the loaded assembly's version is different than the expected version application refers to.
    In this case, it should be caused by:
    While starting Report Manager, the backend process ReportingServiceService need to load assemblies it refers to
    ReportingServiceService reads the compilation/assemblies element from web.config(under Report Manager virtual patch)
    If the compilation/assemblies is not existing, ReportingServiceService loads all assemblies from Bin folder. It can be verified from call stack System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory(). ReportingServiceService
    uses System.Reflection.Assembly.Load with the assemblies' name only to load assemblies.
    The Assembly.Load tries to load from the specify assembly by name from GAC at first. If it is found from GAC, it won't be loaded from Bin folder any more.
    Since Reporting Service SharePoint Integration mode is installed, a same assembly of 'Microsoft.ReportingServices.SharePoint.ObjectModel' with different version might be installed to the GAC. That causes the error "The located assembly's manifest definition
    does not match the assembly reference."
    For more information about the error message and the loading process, please see:
    http://blogs.msdn.com/b/junfeng/archive/2004/03/25/95826.aspx
    https://msdn.microsoft.com/en-us/library/yx7xezcf(v=vs.100).aspx
    Thanks,
    Jinchun Chen

  • AddOnsLocalRegistration.sbo file does not match data in the common datab...

    We are receiving the following error everytime we logon our pc for the first time: Add-On Outlook_Integration: This Add-on cannot be upgraded. AddOnsLocalRegistration.sbo file does not match data in the common database for this add-on. See SAP Note 1323680 for more information.
    A few months ago, SBO Server was moved from one server to a new virtual server, but we had no problems with the addons. The other day, we upgraded from SBO 2007 to 8.8 and now we are having problems with the Outlook Integration.
    I have followed the directions in the message noted above, and did find the AddOnsLocalRegistration.sbo file in some odd places, with a reference to the old server. I cleaned this up, on the server and the client and I can get it running...however, after the user shuts down the pc and logs back in the next day, the problem is back.
    In the process of cleaning this up (un-registering the addon and removing the addon references in the local .sbo file) I noticed at times that we would still receive this error, when there really shouldn't be an reference to it.
    Thanks for any help.

    Hi Vaughn.........
    I guess you need a re installation of Outlook Integration Addon.
    Whatever version addon of OI you installed just uninstall it and Install it freshly from 8.8 setup package......
    Regards,
    Rahul

Maybe you are looking for

  • Why can't I post a question from my new system?

    Hello All: I was just trying to post a question from my new mbp but it wouldn't allow me to do anything.  It continually gave me a message highlighted in 'red' that i was;t allowed to modify or post anything.  I've been asking questions for quite a w

  • Link to Content Area from ASP page brings up default page

    I have a link on an ASP to the content area. When the user clicks on the link, he/she is required by the portal to provide their username/password. After entering the correct information, the users are displayed their default page NOT taken to the co

  • Put a div tag on EBS HomePage

    I want to put a div tag on the HomePage of EBS. The applications menu can get long and by request of client if possible to put the scroll bars on the menus, but not scroll on the browser so as to see his favorites all the time. I've read the UIX Deve

  • Macmini Server for Mentoring program

    I am in the development stages of setting up a mentoring program. I have been looking at the macmini server as an option but have a some questions in regards of ease of use versus a linux setup. I will be using apple computers along with ipad for my

  • Reformatte​d Clean install. NEED HELP

    Hi everyone my old HDD Crashed and i bought a new one, I Did a fresh install of windows 7 and now my FN + F Keys wont work, For example when i press FN + F5 i dont get anything before i used to get a screen to turn on bluetooth and stuff. Im frustrat