Job gets cancelled - Plan version cannot be planned for fiscal year

hello,
In R/3, I am trying to delete data using KEPM TCODEand the job gets cancelled with message "Plan version cannot be planned for fiscal year".
Does anyone know what I should do to resolve it.
thanks,
Bhat

Hello,
Thanks for your response.
I have checked OKEQ and
we have entries for fiscal year planning version and in operating concern the version is locked. I don't know if I should unlock the version and what will be the impact.
thanks,
Bhat

Similar Messages

  • Version  0 not defined for fiscal year...

    Dear Experts..
    Im trying to do an hiring action but system says Version  0 not defined for fiscal year...
    Could someone tell me wat could be the reason???
    Regards
    Shanthini

    Hi,
    Go to SPRO: Controlling -  General controlling - Org - Maintain versions
    On the right hand side select version 0 then select controlling area settings.
    Again select version 0 on the right hand side and select Settings for each fiscal year.
    Then maintain the settings for the relevant fiscal year.
    Regards,
    Dilek

  • Version 0 is not defined for fiscal year 2012.

    Hello Experts,
    While am tring to release  a work order, i am getting the below error.
    Version 0 is not defined for fiscal year 2012.
    Message no. GP626
    Diagnosis
    The version 0 is not defined in controlling area DE06 for the fiscal year 2012.
    You have to maintain the fiscal year-dependent version parameters for all actual versions for which multiple valuation is updated.
    System Response
    The version 0 cannot be used for fiscal year 2012.
    Procedure
    Maintain the fiscal year-dependent version parameters for the version 0.
    Execute function
    By this what i understood is we need to change the Settings for each fiscal year for the version 0 in controlling area DE06.
    i.e. we need to add the fiscal year 2012 in that.
    Is this correct????
    If yes what will be the impact of adding 2012 in that screen?
    i think its a soft config only.
    Please let me know the correct process
    Thanks in Advance,
    Satya

    Version 0 is not defined for fiscal year 2015.
    What to do next ? Please help with it.

  • KP26 version 0 lock for fiscal year 2010

    why i cannot update KP26 using version 0? but when i using version 1 its ok ?
    now my fiscal year  is 2010, and period 3.
    the error shows - version 0 is block for fiscal year 2010. where i should check and change?

    Hi,
    check this link.
    link:[Re: Activity type problem;
    hope it'll give some idea.
    Regards,
    Sneha.

  • LANDSCAPE FETCH job gets cancelled

    Hello Guru's,
    The  LANDSCAPE FETCH job gets cancelled on solution manager system due to the below mentioned error and in order to fix it
    we have already applied the SAP note 1335225 but, the issue still persists.
    Right now, we have come across the SAP note 1108071 which says the job will get cancelled "if you made adaptive computing
    settings in SMSY and the SLD is not accessible".
    can any one help me with how to check the adaptive computing settings in the header data of the system.
    Also, the SLD check from system via tcode:sldcheck is sucessfull and we could access the SLD via browser. Please find the
    details below.
    Properties of RFC destination SAPSLDAPI
    RFC host:
    %%RFCSERVER%%
    program id:      SAPSLDAPI_MP0
    gateway host:
    gateway service:
    Testing the RFC connection to the SLD java client...
    RFC ping was successful
    SLD server access settings:
    host name:   ashb01wa06pr.global.aes.com
    port number: 59000
    user       : SLDAPIUSER
    Use transaction SLDAPICUST if you wish to maintain the SLD server access d
    Launching the SLD GUI in a separate browser window...
    => Verify in the browser GUI that the SLD is in a healthy running state!
    Calling function LCR_LIST_BUSINESS_SYSTEMS
    Retrieving data from the SLD server...
    Function call returned exception code     3
    => Check whether the SLD is running!
    Immediate reponse is highly appreciated
    Best Regards,
    S.Viswanathan

    Hello,
    Could you include the Landscape_fetch error you mentioned in your message?
    I think the issue is still your SLD.  At the bottom of SLDCHECK it tries to retreive business systems in SLD. 
    If it is successfull you will see something like:
    Calling function LCR_LIST_BUSINESS_SYSTEMS
    Retrieving data from the SLD server...
    Function call terminated sucessfully
    List of business systems maintained in the SLD:
       yoursystem1
       yoursystem2
       yoursystem3
      (more...)
    Your SLD check shows that it cannot retrieve systems from the SLD:
    Calling function LCR_LIST_BUSINESS_SYSTEMS
    Retrieving data from the SLD server...
    Function call returned exception code 3
    => Check whether the SLD is running!
    Please make sure that you have configured your SLD according to the post-installSLD setup and configuration guide.  If you still have problems, follow this toubleshooting process...
    http://help.sap.com/saphelp_nw70/helpdata/EN/78/20244134a56532e10000000a1550b0/frameset.htm
    Best Regards.
    Edited by: Phil May on Sep 2, 2009 10:31 AM

  • Copying One Plan Version to Another Plan Version

    Hi Experts,
    When  I am copying one plan version to target plan version by using the transaction RE_RHCOPL00,
    I am getting waring as the target version is not empty.
    I have checked the tables HRP1000,HRP1001 but no objects exists for the target planversion.
    Secondly I am getting waring also Number Assignment is not for all plan versions.
    My requirement is to copy 3 different plan version into one plan version.
    Thanks in Advance.
    Regards,
    IFF

    Archana,
    Thanx for the prompt the  response.
    My  concern is the  I have three different plan versions ( division wise) , I need to copy all the 3 plan version into one tranget plan version ( which is not active).
    But in Quality and Development system we have  table T77S0  with the entry 05 for the Numrg and Comp.
    Should I assign the same in prodution.
    I am sure that 3 different plan versions have unique numbers.Please advice what to do.
    Regards,
    IFF

  • Background Job get Cancelled when executing the report. Reason?

    Hi All,
    I have scheduled a Back ground Job and executed Immediately.
    when checking transacion SM37 the job get canceled.
    How to find out the problem for the Job Cancellation.
    Regards,
    Viji

    hi
    After scheduling back ground job ( give a time laps of 2 min )
    then go to sm37 ( at this moment , the job is not yet started) .
    select ur job in sm 37 and when job starts processing , type JDBG as the command and press enter.
    Now it will go to the debugging screen, where u will find system program . Now set a break point at the stements used in ur program from the debugging screen itself.( menu - breakpoint- breakpoint at - statement ) and press F8 .
    Now you can start debug ur code.
    Revrt back if any issues.
    Regards,
    Naveen

  • Job getting cancelled in background scheduling

    Hi,
        I have written a report  in the SAP HR system and it is to be scheduled in background. This program transfers the PERNRs from HR system to CRM system as partners in BUT000.The report works perfectly fine if it is run in foreground. When I run it in background the job gets cancelled and I get the job log having a message that it could not ascertain code page and the system exception ERROR_MESSAGE is raised. If anybody has any clues regarding this problem please help me.
    Thanks & Regards,
    Rahul.

    Hi,
    I Guess you are using container controllers in the Report, and all container contols requires help from Sap Gui for execution. I guess that is the reason it is failing in background . Please check on that aspect as well.
    Hope this helps..

  • Delta uploading job get cancelled in SAP R/3

    question, during delta loading from SAP R/3 to BW, if the delta uploading job get cancelled twice for some reason, will I lost some delta data??
    Pls advise!
    Many Thanks!
    rajatina.

    Hi,
    If your delta jobs are getting error out in BW then you don't need to worry about, because till that time your delta pointer in source system is not yet updated. But if you make any request green by chance in BW monitor then your delta pointer will get updated and you might loose some delta.
    You can request repeat delta multiple times without any issue.
    Regards,
    Durgesh.

  • How to send a mail to the user when a job gets canceled?

    Hi experts,
                      I need to send a mail when a job gets canceled to the user.I know the FM for sending mail and i can find if a job is canceled from tbtco,but i want to know how to send the mail from the same program ,once it got canceled ?
    thanks in advance,
    helpful answers will be awarded with points
    regards,
    ashwin

    Hi Ashwin
    Use the below peace of code:
    REPORT ZBCJOBMONITOR .
    TABLES: SOMLREC90,
            TBTCO.
    DATA: MAILDATA   LIKE SODOCCHGI1.
    DATA: MAILTXT    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
    DATA: MAILREC    LIKE SOMLREC90 OCCURS 0  WITH HEADER LINE.
    DATA: I_TBTCO    LIKE TBTCO OCCURS 0 WITH HEADER LINE.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001 .
    SELECT-OPTIONS: S_JOB FOR TBTCO-JOBNAME.
    SELECT-OPTIONS: S_JOBC FOR TBTCO-JOBClass.
    SELECT-OPTIONS: S_REC FOR SOMLREC90-RECEIVER.
    SELECTION-SCREEN END OF BLOCK B1.
    START-OF-SELECTION.
      CLEAR:    MAILDATA, MAILTXT, MAILREC, I_TBTCO.
      REFRESH:  MAILTXT, MAILREC, I_TBTCO.
      PERFORM GET_ABENDED_JOBS.
      PERFORM BUILD_RECEIVERS.
      LOOP AT I_TBTCO.
        PERFORM BUILD_TEXT_MESSAGE.
        PERFORM SEND_MAIL_NODIALOG..
      ENDLOOP.
         Form  BUILD_TEXT_MESSAGE
    FORM GET_ABENDED_JOBS.
      SELECT * FROM TBTCO
              INTO CORRESPONDING FIELDS OF TABLE I_TBTCO
                         WHERE JOBNAME IN S_JOB
                           AND STATUS = 'A'
                           AND JOBCLASS IN S_JOBC
                           AND SDLSTRTDT = SY-DATUM.
    ENDFORM.
         Form  BUILD_TEXT_MESSAGE
    FORM BUILD_TEXT_MESSAGE.
      DATA: DATE(10) TYPE C.
      DATA: TIME(10) TYPE C.
      MAILDATA-OBJ_NAME = 'MONITOR'.
      MAILDATA-OBJ_DESCR = 'Batch Job Monitor'.
      MAILDATA-OBJ_LANGU = SY-LANGU.
      CONCATENATE 'Job Name:' I_TBTCO-JOBNAME
                  INTO MAILTXT-LINE SEPARATED BY SPACE.
      APPEND MAILTXT.
      PERFORM FORMAT_DATE USING I_TBTCO-SDLSTRTDT
                                DATE.
      CONCATENATE I_TBTCO-SDLSTRTTM+0(2) ':'
                  I_TBTCO-SDLSTRTTM+2(2) ':'
                  I_TBTCO-SDLSTRTTM+4(2)
                     INTO TIME.
      CONCATENATE 'Start Date/Time:' DATE TIME
                INTO MAILTXT-LINE SEPARATED BY SPACE.
      APPEND MAILTXT.
      CONCATENATE 'Job Class:' I_TBTCO-JOBCLASS
                INTO MAILTXT-LINE SEPARATED BY SPACE.
      APPEND MAILTXT.
      MAILTXT-LINE = 'Job has terminated abnormally'.
      APPEND MAILTXT.
    ENDFORM.
         Form  BUILD_RECEIVERS
    FORM BUILD_RECEIVERS.
      LOOP AT S_REC.
        CLEAR MAILREC.
        MAILREC-RECEIVER = S_REC-LOW.
        MAILREC-REC_TYPE  = 'U'.
        APPEND MAILREC.
      ENDLOOP.
    ENDFORM.
         Form  SEND_MAIL_NODIALOG
    FORM SEND_MAIL_NODIALOG.
      CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
           EXPORTING
                DOCUMENT_DATA              = MAILDATA
                DOCUMENT_TYPE              = 'RAW'
                PUT_IN_OUTBOX              = 'X'
           TABLES
                OBJECT_HEADER              = MAILTXT
                OBJECT_CONTENT             = MAILTXT
                RECEIVERS                  = MAILREC
           EXCEPTIONS
                TOO_MANY_RECEIVERS         = 1
                DOCUMENT_NOT_SENT          = 2
                DOCUMENT_TYPE_NOT_EXIST    = 3
                OPERATION_NO_AUTHORIZATION = 4
                PARAMETER_ERROR            = 5
                X_ERROR                    = 6
                ENQUEUE_ERROR              = 7
                OTHERS                     = 8.
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.
         Form FORMAT_DATE
    FORM FORMAT_DATE USING IN
                           OUT.
      CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
           EXPORTING
                DATE_INTERNAL            = IN
           IMPORTING
                DATE_EXTERNAL            = OUT
           EXCEPTIONS
                DATE_INTERNAL_IS_INVALID = 1
                OTHERS                   = 2.
    ENDFORM.
    Regards,
    Sree

  • SAP  Back ground Jobs getting cancel automatically

    Hi All,
    All schedule Background jobs getting cancel  automatically in ECC 5 server. Also not getting any job log in respective schedule job. please help me out with expert suggestions.
    Regards
    Gyan

    1)Are the bgd workprocess free in the system currently?Check if there are any long running jobs holding them.
    Bgd Work process are free but with error code 373,223,007 etc for all 5 bg wp
    error reports from work directory as per work process:---
    wp 22 :Fri Sep 25 15:07:04 2009

    A  ABAP/4 Program SAPLSYDB                                .
    A  Source LSYDBU27                                 Line 7.
    A  Error Code DBIF_DSQL2_DEFAULT_CR_ERROR.
    A  Module  $Id: //bas/640_REL/src/krn/runt/abexsql.c#5 $ SAP.
    A  Function DsqlErrorHandler Line 1986.
    A  COMMIT/ROLLBACK error on "DEFAULT" database connection..

    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   12289]
    C  Rollback Work (0)
    M  *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c  252]
    B  ComRolHook(BEFORE_COMMIT, free_all) failed
    B  db_con_commit received an error return code in before-commit action
    M  ***LOG R38=> ThICommit3, db_commit98 ( 001024) [thxxhead.c   12036]
    WP23: Fri Sep 25 15:06:05 2009
    B  dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]):
    B   max_blocking_factor =  50,  max_in_blocking_factor      = 255,
    B   min_blocking_factor =   5,  min_in_blocking_factor      =  10,
    B   prefer_union_all    =   1,  prefer_union_for_select_all =   0,
    B   prefer_fix_blocking =   0,  prefer_in_itab_opt          =   0,
    B   convert AVG         =   1,  alias table FUPD            =   0,
    B   escape_as_literal   =   0,  opt GE LE to BETWEEN        =   0,
    B   select *            =0x00,  character encoding          = STD / []:X,
    B   use_hints           = abap->1, dbif->0x1, upto->0, rule_in->0,
    B                         rule_fae->0, concat_fae->0, concat_fae_or->0
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   12289]
    C  Rollback Work (0)
    M  *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c  252]
    B  ComRolHook(BEFORE_COMMIT, free_all) failed
    B  db_con_commit received an error return code in before-commit action
    M  ***LOG R38=> ThICommit3, db_commit98 ( 001024) [thxxhead.c   12036]
    wp 24:Fri Sep 25 14:33:10 2009
    M  *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c  252]
    B  ComRolHook(BEFORE_COMMIT, free_all) failed
    B  db_con_commit received an error return code in before-commit action
    B  ***LOG BZY=> unexpected return code 32768      calling DBACDS     [dbacds#2 @ 1225] [dbacds  1225 ]

    *WP25: *** ERROR => BtcCleanUp: BtcLgAp-call failed (rc = 4) [btcjcntl.c   1308]*
    M  ThCallHooks: call hook >ITSP: EndOfSession< for event BEFORE_SESSION_CANCEL
    M  ThCallHooks: call hook >RtmClearSession< for event BEFORE_SESSION_CANCEL
    M  ThCallHooks: call hook >HttpClearSession< for event BEFORE_SESSION_CANCEL
    M  ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_SESSION_CANCEL
    M  ***LOG R47=> ThResFree, delete (001009) [thxxmode.c   1284]
    M  ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
    M  ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
    M  ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
    M  ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
    M  ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
    M  ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_TASK_SWITCH
    M  ThCallHooks: call hook >ImcResetPtr< for event BEFORE_TASK_SWITCH
    M  ThCallHooks: call hook >DbgBeforeTaskSwitch< for event BEFORE_TASK_SWITCH
    M  ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SWITCH

    B Fri Sep 25 14:47:04 2009
    B  Disconnected from connection con_da={R/3*WORKFLOWTRACE,26000006,1}
    please let me know where i can send log file if req.
    2)Check for the sm21/sm50 bgd wp traces.
    Getting so may Tem se management errors.
    Some TemSe objects are stored in files. To do this, a path name is set up from the TemSe object name. To be able to use this path, TemSe management requires a directory. It attempted to create it itself. However, this did not succeed.
    3)Check if the filesystem is full as you suggest no logs are being written.
    File system having free space
    4)Check if the user who has scheduled the job is locked ?
    user unlocked
    please help me to resolv this issue.
    thanks
    Gyan
    Edited by: Gyan Prakash on Oct 9, 2009 10:02 AM

  • Triggering  a job when the first job gets cancelled...

    From BMV0, we can trigger a job once the first job is completed using the 'After Job' option. Can u tell me if its also possible to start another job when the first job gets cancelled ?
    Message was edited by: Sushma Anuprava
    Message was edited by: Sushma Anuprava

    Hi,
    Go to the database view V_OP and check for the column 'STATUS' which gives the background job status , based on value from this column (cancelled status ) , start the new job with FM : 'JOB_START' .
    Regards
    Appana

  • New plan version - Copy from plan to plan

    Hello,
    I copied a new plan version X from plan version 0 with KP97. Now I realized that only planning primary costs were copied. Is it possible to copy also the secondary costs (resulting from assessments) to the new plan version. If not, is it possible to copy the plan assessment cycles from version 0 to version X. Or can the existing plan cycles (KSUB) can be used for both versions (hoever I could not find a selection field where I can choose the required plan version)?
    Thank you in advance for your feedback.
    Ali

    Hi,
    a plan assessment cycle contains CO-version information in its header date.
    You can use KSU7 to copy a plan assessment cycle from version A to version B, just enter CO-version B in the header data of the copied cycle and ensure that in "sender values" the version is initial (thus the header data CO-version takes place).
    BR Christian

  • Job gets cancelled automactically

    Dear SAP pros,
    Could be tell me what are the reasons that a job gets cancelled automactially by the system . Exp user is trying to run T code /sie/asp_mm_ale_las_bom_reset . It starts but is automatically cancelled saying Program can only be used by user in Selection.  Job cancelled after system expection SYSETM ERROR
    Any inputs much appreciated.
    Thanks,
    Diwakar

    Hi
    Can you please check the table "TBTCP". Check whether the user allowed to run the job is same as that the person who is running the job.
    Regards,

  • I bought an app which was free. To get the full version I then paid for it. I used it for months and now it's saying I have not got the full version and I no longer have access to the full app like I used to.

    I bought an app which was free. To get the full version I then paid for it. I used it for months and now it's saying I have not got the full version and I no longer have access to the full app like I used to.

    Try contacting the app support of the particular app your using.
    Most apps have an app support button on their app page within itunes.
    If they wont reply within a reasonable amount of time and you feel like the particular app developer has cheated you, bring the issue forward to apple care.
    Note that app developer have their own customer support.

Maybe you are looking for

  • Error while executing the Process through GP Runtime

    Hi All,        I have created a Process        Sequential Block                Action 1                Action 2 When i am running the process in the GP Runtime , the Action is executed and the View is displayed. When we click on the Submit button whi

  • I try to complain to Adobe but nobody listens...

    I have called the Customer Service, emailed, called the Head Office and promised a reply... still nothing... no responses from Adobe!!!! Simple Step by Step Details!!!!!!!!! 1) I am an Adobe Creative Cloud Subscriber 2) Adobe send me emails with "val

  • How to create a Virtual part list for the particular assembly.

    Dear Gurus,                     For our single purchasing order of particular assembly, we have multiple suppliers who can contribute in that Assembly. For example The purchasing order of Assembly X is given to supplier A and in that some part should

  • Why does InDesign always open multiple files in reverse number order?

    Whenever I select multiple InDesign files to open, despite being named accordingly Page_01, Page_02, Page_03, etc. InDesign always opens them in reverse order tabs. If I open 10 spreads at once instead of staring at page 1 I'm looking at the back. Is

  • NEED HELP, display driver stopped working, macbook pro late 2013 13,3 inc

    Hi, guys I have the problem "display driver stopped responding and has recovered" on my macbook pro late 2013 with windows system. it crashes constantly. I tried to update driver, but it was not resolved. someone can help me? thanks