Job getting cancelled in background scheduling

Hi,
I have written a report in the SAP HR system and it is to be scheduled in background. This program transfers the PERNRs from HR system to CRM system as partners in BUT000.The report works perfectly fine if it is run in foreground. When I run it in background the job gets cancelled and I get the job log having a message that it could not ascertain code page and the system exception ERROR_MESSAGE is raised. If anybody has any clues regarding this problem please help me.
Thanks & Regards,
Rahul.

Hi,
I Guess you are using container controllers in the Report, and all container contols requires help from Sap Gui for execution. I guess that is the reason it is failing in background . Please check on that aspect as well.
Hope this helps..

Similar Messages

Background Job get Cancelled when executing the report. Reason?

Hi All,
I have scheduled a Back ground Job and executed Immediately.
when checking transacion SM37 the job get canceled.
How to find out the problem for the Job Cancellation.
Regards,
Viji

hi
After scheduling back ground job ( give a time laps of 2 min )
then go to sm37 ( at this moment , the job is not yet started) .
select ur job in sm 37 and when job starts processing , type JDBG as the command and press enter.
Now it will go to the debugging screen, where u will find system program . Now set a break point at the stements used in ur program from the debugging screen itself.( menu - breakpoint- breakpoint at - statement ) and press F8 .
Now you can start debug ur code.
Revrt back if any issues.
Regards,
Naveen

SAP Back ground Jobs getting cancel automatically

Hi All,
All schedule Background jobs getting cancel automatically in ECC 5 server. Also not getting any job log in respective schedule job. please help me out with expert suggestions.
Regards
Gyan

1)Are the bgd workprocess free in the system currently?Check if there are any long running jobs holding them.
Bgd Work process are free but with error code 373,223,007 etc for all 5 bg wp
error reports from work directory as per work process:---
wp 22 :Fri Sep 25 15:07:04 2009
A
A ABAP/4 Program SAPLSYDB                                .
A Source LSYDBU27                                 Line 7.
A Error Code DBIF_DSQL2_DEFAULT_CR_ERROR.
A Module $Id: //bas/640_REL/src/krn/runt/abexsql.c#5 $ SAP.
A Function DsqlErrorHandler Line 1986.
A COMMIT/ROLLBACK error on "DEFAULT" database connection..
A
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   12289]
C Rollback Work (0)
M *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c 252]
B ComRolHook(BEFORE_COMMIT, free_all) failed
B db_con_commit received an error return code in before-commit action
M ***LOG R38=> ThICommit3, db_commit98 ( 001024) [thxxhead.c   12036]
WP23: Fri Sep 25 15:06:05 2009
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]):
B   max_blocking_factor = 50, max_in_blocking_factor      = 255,
B   min_blocking_factor =   5, min_in_blocking_factor      = 10,
B   prefer_union_all    =   1, prefer_union_for_select_all =   0,
B   prefer_fix_blocking =   0, prefer_in_itab_opt          =   0,
B   convert AVG         =   1, alias table FUPD            =   0,
B   escape_as_literal   =   0, opt GE LE to BETWEEN        =   0,
B   select *            =0x00, character encoding          = STD / []:X,
B   use_hints           = abap->1, dbif->0x1, upto->0, rule_in->0,
B                         rule_fae->0, concat_fae->0, concat_fae_or->0
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   12289]
C Rollback Work (0)
M *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c 252]
B ComRolHook(BEFORE_COMMIT, free_all) failed
B db_con_commit received an error return code in before-commit action
M ***LOG R38=> ThICommit3, db_commit98 ( 001024) [thxxhead.c   12036]
wp 24:Fri Sep 25 14:33:10 2009
M *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c 252]
B ComRolHook(BEFORE_COMMIT, free_all) failed
B db_con_commit received an error return code in before-commit action
B ***LOG BZY=> unexpected return code 32768      calling DBACDS     [dbacds#2 @ 1225] [dbacds 1225 ]
B
*WP25: *** ERROR => BtcCleanUp: BtcLgAp-call failed (rc = 4) [btcjcntl.c   1308]*
M ThCallHooks: call hook >ITSP: EndOfSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >RtmClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >HttpClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_SESSION_CANCEL
M ***LOG R47=> ThResFree, delete (001009) [thxxmode.c   1284]
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >ImcResetPtr< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >DbgBeforeTaskSwitch< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SWITCH
B
B Fri Sep 25 14:47:04 2009
B Disconnected from connection con_da={R/3*WORKFLOWTRACE,26000006,1}
please let me know where i can send log file if req.
2)Check for the sm21/sm50 bgd wp traces.
Getting so may Tem se management errors.
Some TemSe objects are stored in files. To do this, a path name is set up from the TemSe object name. To be able to use this path, TemSe management requires a directory. It attempted to create it itself. However, this did not succeed.
3)Check if the filesystem is full as you suggest no logs are being written.
File system having free space
4)Check if the user who has scheduled the job is locked ?
user unlocked
please help me to resolv this issue.
thanks
Gyan
Edited by: Gyan Prakash on Oct 9, 2009 10:02 AM

Triggering a job when the first job gets cancelled...

From BMV0, we can trigger a job once the first job is completed using the 'After Job' option. Can u tell me if its also possible to start another job when the first job gets cancelled ?
Message was edited by: Sushma Anuprava
Message was edited by: Sushma Anuprava

Hi,
Go to the database view V_OP and check for the column 'STATUS' which gives the background job status , based on value from this column (cancelled status ) , start the new job with FM : 'JOB_START' .
Regards
Appana

LANDSCAPE FETCH job gets cancelled

Hello Guru's,
The LANDSCAPE FETCH job gets cancelled on solution manager system due to the below mentioned error and in order to fix it
we have already applied the SAP note 1335225 but, the issue still persists.
Right now, we have come across the SAP note 1108071 which says the job will get cancelled "if you made adaptive computing
settings in SMSY and the SLD is not accessible".
can any one help me with how to check the adaptive computing settings in the header data of the system.
Also, the SLD check from system via tcode:sldcheck is sucessfull and we could access the SLD via browser. Please find the
details below.
Properties of RFC destination SAPSLDAPI
RFC host:
%%RFCSERVER%%
program id:      SAPSLDAPI_MP0
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name:   ashb01wa06pr.global.aes.com
port number: 59000
user       : SLDAPIUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access d
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code     3
=> Check whether the SLD is running!
Immediate reponse is highly appreciated
Best Regards,
S.Viswanathan

Hello,
Could you include the Landscape_fetch error you mentioned in your message?
I think the issue is still your SLD. At the bottom of SLDCHECK it tries to retreive business systems in SLD.
If it is successfull you will see something like:
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
   yoursystem1
   yoursystem2
   yoursystem3
(more...)
Your SLD check shows that it cannot retrieve systems from the SLD:
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 3
=> Check whether the SLD is running!
Please make sure that you have configured your SLD according to the post-installSLD setup and configuration guide. If you still have problems, follow this toubleshooting process...
http://help.sap.com/saphelp_nw70/helpdata/EN/78/20244134a56532e10000000a1550b0/frameset.htm
Best Regards.
Edited by: Phil May on Sep 2, 2009 10:31 AM

Delta uploading job get cancelled in SAP R/3

question, during delta loading from SAP R/3 to BW, if the delta uploading job get cancelled twice for some reason, will I lost some delta data??
Pls advise!
Many Thanks!
rajatina.

Hi,
If your delta jobs are getting error out in BW then you don't need to worry about, because till that time your delta pointer in source system is not yet updated. But if you make any request green by chance in BW monitor then your delta pointer will get updated and you might loose some delta.
You can request repeat delta multiple times without any issue.
Regards,
Durgesh.

How to send a mail to the user when a job gets canceled?

Hi experts,
                  I need to send a mail when a job gets canceled to the user.I know the FM for sending mail and i can find if a job is canceled from tbtco,but i want to know how to send the mail from the same program ,once it got canceled ?
thanks in advance,
helpful answers will be awarded with points
regards,
ashwin

Hi Ashwin
Use the below peace of code:
REPORT ZBCJOBMONITOR .
TABLES: SOMLREC90,
        TBTCO.
DATA: MAILDATA   LIKE SODOCCHGI1.
DATA: MAILTXT    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: MAILREC    LIKE SOMLREC90 OCCURS 0 WITH HEADER LINE.
DATA: I_TBTCO    LIKE TBTCO OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001 .
SELECT-OPTIONS: S_JOB FOR TBTCO-JOBNAME.
SELECT-OPTIONS: S_JOBC FOR TBTCO-JOBClass.
SELECT-OPTIONS: S_REC FOR SOMLREC90-RECEIVER.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
CLEAR:    MAILDATA, MAILTXT, MAILREC, I_TBTCO.
REFRESH: MAILTXT, MAILREC, I_TBTCO.
PERFORM GET_ABENDED_JOBS.
PERFORM BUILD_RECEIVERS.
LOOP AT I_TBTCO.
    PERFORM BUILD_TEXT_MESSAGE.
    PERFORM SEND_MAIL_NODIALOG..
ENDLOOP.
     Form BUILD_TEXT_MESSAGE
FORM GET_ABENDED_JOBS.
SELECT * FROM TBTCO
          INTO CORRESPONDING FIELDS OF TABLE I_TBTCO
                     WHERE JOBNAME IN S_JOB
                       AND STATUS = 'A'
                       AND JOBCLASS IN S_JOBC
                       AND SDLSTRTDT = SY-DATUM.
ENDFORM.
     Form BUILD_TEXT_MESSAGE
FORM BUILD_TEXT_MESSAGE.
DATA: DATE(10) TYPE C.
DATA: TIME(10) TYPE C.
MAILDATA-OBJ_NAME = 'MONITOR'.
MAILDATA-OBJ_DESCR = 'Batch Job Monitor'.
MAILDATA-OBJ_LANGU = SY-LANGU.
CONCATENATE 'Job Name:' I_TBTCO-JOBNAME
              INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
PERFORM FORMAT_DATE USING I_TBTCO-SDLSTRTDT
                            DATE.
CONCATENATE I_TBTCO-SDLSTRTTM+0(2) ':'
              I_TBTCO-SDLSTRTTM+2(2) ':'
              I_TBTCO-SDLSTRTTM+4(2)
                 INTO TIME.
CONCATENATE 'Start Date/Time:' DATE TIME
            INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
CONCATENATE 'Job Class:' I_TBTCO-JOBCLASS
            INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
MAILTXT-LINE = 'Job has terminated abnormally'.
APPEND MAILTXT.
ENDFORM.
     Form BUILD_RECEIVERS
FORM BUILD_RECEIVERS.
LOOP AT S_REC.
    CLEAR MAILREC.
    MAILREC-RECEIVER = S_REC-LOW.
    MAILREC-REC_TYPE = 'U'.
    APPEND MAILREC.
ENDLOOP.
ENDFORM.
     Form SEND_MAIL_NODIALOG
FORM SEND_MAIL_NODIALOG.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = MAILDATA
            DOCUMENT_TYPE              = 'RAW'
            PUT_IN_OUTBOX              = 'X'
       TABLES
            OBJECT_HEADER              = MAILTXT
            OBJECT_CONTENT             = MAILTXT
            RECEIVERS                  = MAILREC
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            DOCUMENT_TYPE_NOT_EXIST    = 3
            OPERATION_NO_AUTHORIZATION = 4
            PARAMETER_ERROR            = 5
            X_ERROR                    = 6
            ENQUEUE_ERROR              = 7
            OTHERS                     = 8.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
     Form FORMAT_DATE
FORM FORMAT_DATE USING IN
                       OUT.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
       EXPORTING
            DATE_INTERNAL            = IN
       IMPORTING
            DATE_EXTERNAL            = OUT
       EXCEPTIONS
            DATE_INTERNAL_IS_INVALID = 1
            OTHERS                   = 2.
ENDFORM.
Regards,
Sree

Job gets cancelled automactically

Dear SAP pros,
Could be tell me what are the reasons that a job gets cancelled automactially by the system . Exp user is trying to run T code /sie/asp_mm_ale_las_bom_reset . It starts but is automatically cancelled saying Program can only be used by user in Selection. Job cancelled after system expection SYSETM ERROR
Any inputs much appreciated.
Thanks,
Diwakar

Hi
Can you please check the table "TBTCP". Check whether the user allowed to run the job is same as that the person who is running the job.
Regards,

Job gets cancelled - Plan version cannot be planned for fiscal year

hello,
In R/3, I am trying to delete data using KEPM TCODEand the job gets cancelled with message "Plan version cannot be planned for fiscal year".
Does anyone know what I should do to resolve it.
thanks,
Bhat

Hello,
Thanks for your response.
I have checked OKEQ and
we have entries for fiscal year planning version and in operating concern the version is locked. I don't know if I should unlock the version and what will be the impact.
thanks,
Bhat

Background job getting CANCELLED

hello,
i have a background job scheduled for a report program.it is getting cancelled and giving the following error:
"TABLE_ILLEGAL_STATEMENT"
You attempted to change, delete or create a line in the
internal table "???", but no valid cursor exists
for the table.
Possible reasons:
1. The relevent ABAP/4 statement does not include the addition
   "...INDEX...", although the statement is not
   inside a "LOOP...ENDLOOP" loop processing this table.
2. The relevent ABAP/4 statement was called from within a
   "LOOP...ENDLOOP" loop after a DELETE "???".
what could be the reason?

it is also giving following error message:
Caution: Program has changed
Caution: At time of termination, Active source code no longer available and after above two statements its giving sign "?" before every statement in below manner:
024300 ?     lit_ekpo_dummy1[] = it_ekpo[].
024310 ?     DELETE lit_ekpo_dummy1 WHERE ebeln NE tab1-ebeln.
024320 ?     DESCRIBE TABLE lit_ekpo_dummy1 LINES count01.
024330 ?
024340 ?     REFRESH lit_ematn_dummy[].
024350 ?     lit_ematn_dummy[] = lit_ematn[].

Background Jobs getting Cancelled

Hi SRM Gurus
we are working on SRM 4.0 and follow a classic scenarios.
We have schedulled following background jobs
1 BBP_GET_STATUS_2
2 CLEAN_REQREQ_UP
3 SMWP_BATCH
Which were running successfully however from yesterday this all jobs are showing status cancelled.
Can any one throw some light as to why this jobs are getting cancelled or how to check the reaons for the cancelling of jobs.
regards,
Nimish Sheth

Hi Nimish,
for how long where they running ?
They might be cancelled because of time out (ex: R/3 system not available temporary).
Do you have traces in SM21 in the same time fence ?
Rgds
Christophe

Report program when run in background job getting cancelled immediately

Hi
When i run a program in foreground i am able to see the output. But when run in background not able to run the job successfully. The job is getting cancelled immediately.
I am using the below function module for output display. Should i need to pass any parameters in the below function module so that i can run the program in background successfully.
CALL METHOD DETAIL_GRID->SET_TABLE_FOR_FIRST_DISPLAY
      EXPORTING
        IS_LAYOUT         = IS_LAYOUT
        I_SAVE            = 'A'
        IS_VARIANT        = GS_VARIANT
      CHANGING
        IT_FIELDCATALOG   = IT_FIELDCATALOG
        IT_OUTTAB         = BLOCKED_STOCK_TAB_ALV[].
Please suggest.
Thanks and regards
Rajani Yeluri

Hi Rajani.
ALV require the DRYPOR(screen) for display but incase you run in back ground which have to write to spool but in spool we can only write in format of LIST REPORT not inter-active report like ALV. That why
system cancelled your process immediately.
Hope it helps.
Sayan.

EMIGALL Distributed Import Job for BP is getting cancelled in background

Hi,
When I'm restarting Distributed import and it's getting cancelled after some time with system error as "internal lock table overflow".
I checked SM12 (while job was running) it's showing 14,000 - 15,000 locks on table BUT000, even though EMIGALL is not updating that table as it's rerun of the old job. (Old job been cancelled due to network issue.).
Can anybody please help me to understand why it's happening?
Thanks in advance,
Sagar

Hi Sagar,
I think I can explain what happened in your system:
During data migration the application encountered many errors and does not release the locks immediately. Remember: it is not the slave jobs that creates locks but the called application (through the service functio module). If the application enncounters an error (also when the business object cannot be locked due to a lock table overflow) it returns the error and the load program writes it to the error log. The saved error message is not always directly related to the lock table overflow situation. Often it is saying: object already locked by user xxx).
The master jobs uses also locks to block the configuration of its profile against concurrent access (exclusive access). If a user blocks the profile temporarily during an update of the profile, the master job waits until the update operation finishes. This last usually only very few ms. If the master encounteres a 'lock table overflow' situation it cancels - as designed be the developer.
The simple solution is that you should avoid a lock table overflow situation and/or that the lock table must not be too small.
Sagar, I might also be that you find also the error 'lock table overflow' in the system log. Please check.
Kind regards,
Fritz

Job getting cancelled with Tbale_illegal_statement dump

hello,
Hi Experts,
i have a background job scheduled for a standard transaction SARA .it is getting cancelled and giving the following error:
"TABLE_ILLEGAL_STATEMENT"
Information on where terminated
The termination occurred in the ABAP program "SAPLCKMLLAARCH" in
"CKMLLA_INIT_READ".
The main program was "RKSARCDL ".
The termination occurred in line 253 of the source code of the (Include)
program "LCKMLLAARCHF01"
of the source code of program "LCKMLLAARCHF01" (when calling the editor 2530).
The program "SAPLCKMLLAARCH" was started as a background job.
The line it is giving Dump Is > INSERT handle_tab.
I have tried to debug the transaction but the execution is not ata all going to the program
SAPLCKMLLAARCH where it is giving dump.Propably because that program is running in Background.
So please let me know how I can fix this issue..Please

Hi Prashanth,
Were you able to resolve the issue ? Because, i am also facing the same problem, when I am triggering the Delete step for CO_CCMAST archiving object.
Regards,
Shail.

RDDGENOL job getting cancelled with huge number of ABAP dumps

Hi,
In our Production system, we had applied Kernel upto patch level 263 and while
applying SPAM 30 for release 640 it failed. We tried applying Basis patch 15 still
it did not went through.
Since then we are getting around 1500-2500 dumps daily. The job RDDGENOLis getting cancelled and the dumps RAISE_EXCEPTION and SYNTAX_ERROR is displayed in ST22. Today, there were around 2500 dumps in the system.
When I now run the Database <-> ABAP Dictionary consistency check in
DB02, I see number of errors for missing objects in the database. There
are around of dozens of Primary Indexes, secondary Indexes, Tables,
Views listed in the result:
Objects Missing in database No.
=========================== ===
Primary indexes 6
Secondary indexes 14
Tables 37
Views 26
When I try to create each of them using SE16 or using SQL utility on OS
level, it gives an SQL system error. We are also getting thousands of
dumps each day (attached alongwith this message). Also I see the CPF327E error
in the OS Level Joblog.
Also we cannot transport any requests. There is some problem with or
due to the conversions. Is it a problem with Kernel, ABAP dictionary or
database.
Following is the extract of the dumps due to DDIC in 000:
============================================================
Runtime Error          SYNTAX_ERROR
Date and Time
ShrtText
Syntax error in program "CL_WB_CROSSREFERENCE==========CP ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLSEWB" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "CL_WB_CROSSREFERENCE==========CP ", the following syntax error
occurred
in the Include "CL_WB_CROSSREFERENCE==========CM00D " in line 8:
|    "The type "KEYWORD_TAB" is unknown."
============================================================
============================================================
Runtime Error          RAISE_EXCEPTION
Date and Time
ShrtText
Exception condition "DESTINATION_NOT_OPEN" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
A RAISE statement in the program "SAPLCRFC" raised the exception
condition "DESTINATION_NOT_OPEN".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
Specified destination is not open.
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"RAISE_EXCEPTION" C
"SAPLCRFC" or "LCRFCU20"
"RFC_CONNECTION_CLOSE"
or
"SAPLCRFC" "DESTINATION_NOT_OPEN"
or
"RADBAT01 " "DESTINATION_NOT_OPEN"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "TXTPDSAP"
Network address.......... "172.16.0.140"
Operating system......... "OS400"
Release.................. "5.3"
Hardware type............ "0065000655EC"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 35
Short dump setting....... "full"
Database server.......... "TXTPDSAP"
Database type............ "DB400"
Database name............ "TXT"
Database owner........... "R3TXTDATA"
Character set............ "en_US.ISO8859-1"
SAP kernel............... "640"
Created on............... "Dec 11 2008 23:06:45"
Created in............... "AIX 1 5 00538A4A4C00 (IBM iSeries with OS400)"
Database version......... "DB4_52"
Patch level.............. "263"
Patch text............... " "
Supported environment....
Database................. "V5R2, V5R3, V5R4, V6R1"
SAP database version..... "640"
Operating system......... "OS400 2 5, OS400 3 5, OS400 4 5, OS400 1 6"
Memory usage.............
Roll..................... 696832
EM....................... 16759712
Heap..................... 0
Page..................... 32768
MM Used.................. 1383120
MM Free.................. 3483600
SAP Release.............. "640"
User and Transaction
Client.............. 000
User................ "DDIC"
Language key........ "E"
Transaction......... " "
Program............. "SAPLCRFC"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLCRFC" in
"RFC_CONNECTION_CLOSE".
The main program was "RADBAT01 ".
The termination occurred in line 22 of the source code of the (Include)
program "LCRFCU20"
of the source code of program "LCRFCU20" (when calling the editor 220).
The program "SAPLCRFC" was started as a background job.
Job name........ "RDDGEN0L"
Job initiator... "DDIC"
|    Job number...... 00032101
============================================================
Kindly let me know the immediate fix. Thanks!
Regards,
Nick

Hi Nick,
I would say, you are having a slight missperception of this forum ... it should not replace your basis ressources in your company.
What you are doing is pretty complex (and the mixtrure of SPAM Update AND Basis SP seems to be wrong to me) and therefore, it will not be possible, to help you, just based on such a short dump.
Sorry,
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

Job getting cancelled in background scheduling

Similar Messages

Maybe you are looking for