Job Opening for Labview Test engineer and Senior Labview Test engineer in Honeywell Automation India Limited,Pune

Job Openings at Honeywell Automation India Ltd., Pune
Honeywell Automation India Ltd, Pune is currently looking Senior and Junior Labview Test Engineers.
Position -Permanent
Job Location: Pune,India.
Job description is as follows:
For Senior Labview Test engineer Position: (4-6 years)
Primary Skills:
• Should be an expert in NI Labview.
• Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW RealTime/FPGA toolkit etc
• Experience on hardware test automation using NI and third party hardware
• Candidate should have knowledge on various protocols such as RS-232, GPIB, MODBUS, Ethernet,Devicenet, Profibus using NI LabVIEW.
• Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
• Ability to work independently with our clients for gathering requirements, preparing various test plans, coding & testing, Installation & support
• Candidate should have good communication skills, presentation skills and interpersonal skills.
• Knowledge of analog and digital electronics that includes schematic reading and understanding
• Knowledge on Database, driver development, communication protocols
Niche Skills:
• Knowledge of Project Development Life Cycle
• Experience in NI Teststand/ LabWindows
• Good Communication Skills
• Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
• Project deployment at client site
• CLD (certified labview developer)
Added Advantage:
• Ready valid passport / VISA will be a plus point.
• Candidate need to travel abroad depending on project requirements.
• Shorter joining period.
• Ready to relocate to Pune
For Junior Labview Test engineer Position: (2-4 years)
Primary Skills:
• Candidate should have worked in NI LabVIEW for atleast 2-4 Years.
• Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW Database toolkit,etc..
• Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
• Candidate should have good communication skills, presentation skills and interpersonal skills.
• Knowledge of analog and digital electronics that includes schematic reading and understanding
• Knowledge on Database, driver development, communication protocols
Niche Skills:
• Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
• Project deployment at client site
• CLAD (certified Labview associate developer)
Added Advantage:
• Ready valid passport / VISA will be a plus point.
• Candidate need to travel abroad depending on project requirements.
• Shorter joining period.
• Ready to relocate toPune,India
Please Forward your updated profile to [email protected]

Dear Sir,
With reference to the website of your company I came to know that there always are the vacancies for the suitable candidates and hence I wish to apply for the same.Currently working in hydraulic environment I am approaching you through this application with great enthusiasm, that I have scope and chance to show my ability and contribute my efforts in well direction. I am enclosing here with my complete Curriculum Vitae .
I am currently working with M/s Minar Hydrosystems PVT. LTD. in Nagpur which is one of the largest manufacturers of hydraulic/pneumatic cylinders, jacks etc. I am In charge for quality department having complete knowledge of instruments with level II in non destructive and automated non destructive techniques. Also handling SAP module in current company with effective administration.
If you need further information regarding my candidature please do write/call me.
Thanks & Regards
Rushikesh P. Deogade
Nagpur, India
Ph.:- +91 9923858523
Attachments:
B.E. Mechanical with 3 years exp as a QC Incharge.doc ‏25 KB

Similar Messages

Job Openings At Honeywell Automation India Ltd., Pune

Honeywell India Automation Ltd, Pune is currently looking for Sr. LabVIEW Engineers on a Permanent basis.
Job description is as follows:
Required Skills:
•Candidate should have 4+ years of experience in LabVIEW. Should be familiar with various NI toolkits and add-on modules.
•Candidate should have implemented various protocols such as RS-232, GPIB, MODBUS, Ethernet, Device net using LabVIEW language.
•Should be familiar with functional test development experience using various NI hardware modules (PCI, PXI, DAQ, cDAQ etc)
•Must be able to work with our global clients.
•Ability to work independently with our clients
•Should be good in debugging exciting code.
•Candidate should have good communication skills, presentation skills and interpersonal skills.
Niche Skills:
•Knowledge of Project Development Life Cycle
•Successfully completed various NI Certification exams (CLAD / CLD / CLA)
Added Advantage:
•Ready valid passport / VISA will be a plus point. Candidate may have to travel abroad depending on project requirements.
•Shorter joining period.
If you think you meet these requirements, please drop me an email with your resume,Current CTC, Expected CTC and Notice Period and contact information to: [email protected], [email protected]
Thanks,
Avni Vyas

TO
HR Manager
I have an enough knowledge about my core subject and skills to secure the job.
I completed B.tech in discipline of Electronics and Communication Engineering.
I completed my PG Diploma in INDUSTRIAL AUTOMATION AND SYSTEM DESIGN.
I trained concepts on LAB-VIEW, SCADA DCS RS-232 ,Fieldbuses And all plc programming (ab,abb,Siemens)
Please find the attached RESUME
I look forward to hearing from you soon.
Sincerely
Thanking you
DANDUPROLU YASWANTH ANIL
Attachments:
RESUME_YASWANTHANIL D.doc ‏41 KB
RESUME_YASWANTHANIL D.doc ‏41 KB

Job openning for Labview developer with fiber optical experience

job openning for Labview developer with fiber optical experience

I am a Test Engineer with 10 years LabVIEW experience, as well as TestStand, VB6, C, Assembly language, programming
also experienced with electronics/hardware, and a talented problem solver
I worked for CIENA Corporation writing automatic testing software for their fiber optic products (DWDM)
Available due to plant closing
please contact me at [email protected]
thank you

Job openning for Labview developer with fiber optical experience, Fremont

I have a job openning for Labview developer with fiber optical experience, Fremont, CA
If you have interesting, reply this email ASAP.

Continued here

Period 001/2010 is not open for account type S and G/L 799999

Hi friends
I am in SD. I am trying to create stock for newly created material, movement type 561. system give error Period 001/2010 is not open for account type S and G/L 799999.
I use the T. Code OB52, i am confuse which combination i.e. variant, A, from Account, To Account, from per. 1 Year, To period, Year, from per. 2 year, To Period, Year, I should choose, can some one send me detail reply and solution which may display after this t. code OB52. I also have questin which movement type i should use.
Using T.Code MMPV, i have created new period (from company code 1000, To Company code 1000, period 01, Fiscal Year 1020.
I was reading previous solution, one of them was i should close period 2009. I tried to do this using using MMPV, i entered fiscal year 2009. Error display The specified year 2009 is not the current calender year.
Thanks
Raj

Hi
Hope you are doing this in test server
If this is a real time issue this needs to be addressed by a FI consultant
First see for your company code what is the posting period varient maintained in OBY6
Say if it is 1000
Then in OB52
Maintain a setting like this
1000-S-BLANK-ZZZZZZZZZZ-1--2010122010-13--201016--2010
Then save it
This is for Account type S that is GL accounts
Preferably maintain the same for A, + , D, K, M, V
Regards
Raja

[svn:cairngorm3:] 17872: Popup: Exposed set accessor of open for view state usage and fixed bug when closing from model within popup .

Revision: 17872
Revision: 17872
Author:   [email protected]
Date:     2010-09-27 08:04:40 -0700 (Mon, 27 Sep 2010)
Log Message:
Popup: Exposed set accessor of open for view state usage and fixed bug when closing from model within popup. http://www.spicefactory.org/forum/viewtopic.php?p=3932. Added new sample to show model and view state interactions.
Modified Paths:
    cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpBase.as
    cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpFactory.as
    cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpWrapper.as
    cairngorm3/trunk/libraries/PopupTest/.actionScriptProperties
    cairngorm3/trunk/libraries/PopupTest/src/samples/MyPopup.mxml
    cairngorm3/trunk/libraries/PopupTest/src/samples/PopUpPM.as
Added Paths:
    cairngorm3/trunk/libraries/PopupTest/src/PopUpModelExample.mxml
    cairngorm3/trunk/libraries/PopupTest/src/samples/MyPopupWithModel.mxml

Lots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
Sadly, the following issue is NOT fixed for me. Is it with new projects only? I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
On the list above...
Switching between sequences can turn the render bar red.
This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
1) Create two sequences with multiple short clips (the more clips the better)
2) Make sure GPU acceleration is enabled.
3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
4) Hit SAVE.
5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
6) Toggle back to the original sequence and the delay occurs again.
7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
Sigh.

SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani Sankaran

Hi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Unable to sync contacts, keep saying 'ipad already using contacts'. When I open contacts app it opens for fraction of secs and goes back to main screen. any ideas?

Unable to sync contacts, keep saying 'ipad already using contacts'. When I open contacts app it opens for fraction of secs and goes back to main screen. any ideas?

Sorry for double post, doesnt seem to be an edit option, this also works both ways.

I am trying to lauch an app on my itouch. When I try, it opens for about 2 seconds and then shuts down. I have deleted the app, reset my itouch and download 3 times with no success. Any suggestions?

I am trying to lauch an application on my ipod touch. When I try, it opens for about 2 seconds and then immediately closes. I deleted the application, reset and restarted my ipod and then download the application again. Still no success. The application is legit: Crunchtime for Contracts.
Any suggestions?

I suppose the app has problems with your soft and hardware. Or maybe its a known bug of that app.
Try Uninstalling->Rebooting->Installing->Rebooting.

Job Opening for Test Engineer in Detroit, Novi-Michigan

Hi all,
Harman International Inc., is looking for a Test Engineer to add to our Team.
Job Location: Novi, MI
Job Type: Full Time / Permanent
Job Description,
Knowledge in electronic design for testability requirement.
Knowledge in LabView/TestStand/Process Model test development platform.
Able to develop testing tools (including but not limited to communication protocol tool, driver interface either for specific product, device and/or instrument etc) in LabView/TestStand environment via VB, DotNet or other interfaces as appropriate.
Able to develop, debug and implement manufacturing test SW package based on test spec & test requirement for optimized production test quality control and efficiency.
Knowledge of measurement statistical analysis for production support.
Experience: 3 - 10 years.
Please send me Private Message (PM) for the email to send your resumes.
Note that candidates must be authorized to work in US (H1B VISA)
Still this position is open. My cantact number is 1-248 479 3055
Thanks
Vijay

Name:Anoop Kumar.K.V
AddressF1,SreeBhavan,SaradambaNagar,Ist Main Road,Jallahalli,Bangalore-560013,India
Contact Details:+91-9739180646
Email Address: [email protected]
Date: 02/ 12/ 2014
Hi,
I am a Software engineer with excellent academics and 8.9 years of industrial automation engineering experience in engineering and commissioning of various Poultry Feed Plants. Being specialized in for PLC (Siemens-S7-200, S7-400 and Schneider M340) and Labview2010 programming.I have enclosed my resume that will provide you with proper details about my educational background and work experience.
I am currently working at (Indian Industrial Machines Pvt.Ltd, Bangalore, India) and have gained a valuable experience here as a senior SCADA Developer. I am fluent with VB6.0, VB.Net, Labview2010 and PLC. This matches up with the requirements for the post in your organization.
I would like to meet you and discuss on this more. I would be glad if you could tell me when and where we can meet. I can be contacted at (+919739180646 ) or email me at ([email protected] or [email protected]).
Thank you so much.
Sincerely,
Anoop Kumar.k.v
Enclosures: Resume
Attachments:
AnoopCV.doc ‏222 KB

Job Opening for Test Engineer in Novi-Michigan

Hi all,
Harman International Inc., is looking for a Test Engineer to add to our Team.
Job Location: Novi, MI
Job Type: Full Time / Permanent
Job Description,
Knowledge in electronic design for testability requirement.
Knowledge in LabView/TestStand/Process Model test development platform.
Able to develop testing tools (including but not limited to communication protocol tool, driver interface either for specific product, device and/or instrument etc) in LabView/TestStand environment via VB, DotNet or other interfaces as appropriate.
Able to develop, debug and implement manufacturing test SW package based on test spec & test requirement for optimized production test quality control and efficiency.
Knowledge of measurement statistical analysis for production support.
Experience: 3 - 8 years.
Please send me Private Message (PM) for the contact details to send your resumes.
Thanks
Vijay

But he did put to contact him with the forum's Private Message feature. Now he might not know what that means (it is the little envelope icon to the right side of the blue bar with your own "name". Or clicking on the OP's name will get you to a point where you can send a message.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

V I Engineering, Inc has immediate needs for Systems Engineers (Contract) and Senior Systems Engineers (Contract) (reporting to the Test Software and Integration Group Manager)

Company: V I Engineering, Inc.
Locations: Various - USA
Salary/Wage: $negotiable
Status: Hourly Contractor
Relevant Work Experience: 5+ years system integration (LabVIEW/TestStand experience required)
Career Level: Intermediate/Experienced
Education Level: Bachelor's Degree
Residency/Citizenship: USA Citizenship or Greencard required
Driving Business Results through Test Engineering
V I Engineering, Inc. has a vision for every client we engage. That vision is to achieve on-time and on-budget program launch more efficiently that the competition. To realize this vision, customers need to achieve predictable test systems development, eliminate waste in test information management, and drive increased leverage of test assets. An underlying requirement for all of these areas is metrics tracking and measurement based decision making.
Job Description
Ready to make a difference? Bring your experiences and skills to the industry leading test organization. Help us to continue to shape the way the world views test. We are seeking a talented Systems Engineer Contractor to be responsible for technical execution of successful projects in the Medical, Military, Transportation, Consumer Electronics and Aerospace Industries. The position will have very high visibility to customers and vendors. This is a very fast paced team with close customer contact and strong career development opportunities. A large part of the position is to identify, own and drive technical design, development and installation of test systems. You will work alongside other like-minded and equally talented engineers, and be creative in a fast-paced and flexible environment that encourages you to think outside the box. You will be available to spend extended periods at our customer sites to complete system installations.
Required
5+ years of Systems Integration experience
3+ years LabVIEW experience
1+ years TestStand experience
Experience in Implementation and Delivery of Test Systems, including integration
Experience in ATE usage and development
Experience in building and Integrating Mechanical Fixtures
Experience in Understanding the design of Circuit Boards as they relate to a total system, and their fault-finding
Experience in Taking Part in Technical Teams throughout All Phases of Project Lifecycle
Experience in Interfacing with Sub-vendors and Customers
Ability to Multitask
Comfortable Working on Various Team Sizes
Excellent Communication Skills
Desired
Requirements generation and review experience
National Instruments Hardware knowledge
Experience with Source Code Control (SCC)
Experience executing verification and validation for projects
Experience generating and/or reviewing cost proposals
RF Technology (DAQ, General RF Theory)
FPGA (with LabVIEW)
Professional software engineering processes and metrics experience
TortoiseSVN
V I Package Manager (VIPM)
Experience with Projects for Regulated Industries
MS Project
Formal Education
Technical degree (BS Engineering, Computer Science, Physics, Math)
National Instruments Courses a plus
National Instruments certification a plus
Notes:
Expected Travel Time is up to 50%.
V I Engineering, Inc. offers a dynamic work environment and the flexibility of a small company.
The Test Software and Integration Group values innovation, out-of-the-box thinking, high-tech toys and a fun / amazingly collaborative working environment. We're a National Instruments Select Integrator, and we're the closest you can get to playing with all the pre-released and new NI toys without joining the NI R&D team - and we get to play with them in the real world.
To apply for this position, email a cover letter and resume to [email protected] with the subject "TSIG Systems Engineer (Contract) employment application".
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

Edit
Jeff

Job opening for a LabVIEW / TestStand developer in Auckland, New Zealand

Position Description
Title:                    Test Systems Engineer – Data Acquisition/Test Systems
Roles: LabVIEW Development
                                TestStand development
                                Data Acquisition and Monitoring System Development
                                Project Management
Skills & Qualifications:
Minimum Bachelors Degree in Engineering/Science/Mechatronics/Computer Science
LabVIEW and/or Test Standard development (CLD/CLA). If not already qualified to this level, qualification would be expected with the first 2-3 months
Development Project Team Leadership skills
Technical Report Writing
Experience with Engineering Test Systems
Electronics development
Other relevant Computer Software development skills such .NET, SQL, Javascript, Python
Position Type:
Permanent
The Company:
CPE Systems is project driven design house develops systems for Data Acquisition and Test & Measurement and has successfully delivered hundreds of projects during its 17 year history. Located in Albany Auckland, the position offers easy access via car and public transport. While the successful applicant will complete most of their work from the Albany office, there is opportunity for short-term commissioning and support roles at client sites around New Zealand and Australia.
The company delivers innovative high tech solutions across a broad range of industries and key capabilities include:
Structural and condition monitoring
Engineering and scientific software
Data management and presentation
Control, automation and vision
Test systems
A relationship based business, with a strong people focus, the organisation is committed to professional design and project management processes that go beyond what is normally seen in the industry.
CPE Systems has 15 years experience in the management of over 600 projects, all of varying size, clientele, industry and application. We provide services to industry in five primary areas:
Test Systems
Structural Health and Condition Monitoring
Engineering and Scientific Software
Data Management and Presentation
Control, Automation and Vision
To support these capabilities, we have extensive skills in the following areas:
Project Management
Software Development
Electronics Design
Training
In Service Support
CPE Systems has developed its internal processes over the years to efficiently manage the entire lifecycle of our projects. The CPE database allows us to develop project plans, schedule tasks, monitor project progress, track sent and received goods, manage document versions, register and track project risks, and assess CPE’s performance on each project delivered.
We have a strong people focus, where relationships both internally, and externally with suppliers and clients, are treated with utmost importance.
The standards for performance and development in our industry are very high, so our company is strongly focused on developing and implementing professional design and project management processes that go beyond what is normally seen in industry.
Job Description:
The role is a Test System Engineering Position for a person with a Graduate qualification in Engineer/Science/Software with 4 – 5 years relevant experience in Data Acquisition and/or Test and Measurement systems.
The Test Systems Engineer will lead or be part of a Project Team involving CPE and will be involved in all elements of Data Acquisition, Real Time and Test & Measurement software and hardware projects including;
Requirements Analysis and definition
System Design
Software/Hardware Development
Verification
Report writing
Use of the CPE Systems Development systems
Other Engineering Tasks as required
The Test Systems Engineer will be given training on CPE Systems NZ Ltd development systems.
Opportunities
The Company has a strong focus on its staff, and will provide training in LabVIEW and other phases of the project life-cycle. Creativity and communication skills are valued and fostered in our people to ensure innovative, successful project outcomes.

Please look into my profile at linked in https://in.linkedin.com/in/prashantpatel21 I m interested.
Regards,
PBP (CLAD)
Labview 6.1 - 2014
KUDOS ARE WELCOMED.
If your problem get solved then mark as solution.

ITunes agreement will open for a brief second and close

I have installed and tried all different kinds of things to try and get itunes to work. I can't get itunes to open for the agreement. The agreement will come up but then shut about 1 second later. I have reinstalled more times than I can count. I have symantec firewall and antivirus and have tried shutting them both off and it still will not work. Any help would be greatly appreciated. Thanks Nick

So, you turned off Norton prior to launching iTunes? Do you see both iTunes AND Quicktime in your task manager under the processes tab? If you do, do they stay or go away.
Sounds like a malware issue. Try downloading EWIDO, a free malware program and scan your PC. Norton seems to let too much junk in. Most NOrton users find all sorts of malware on their PC's. Good Luck

Job opening for Oracle ADF with Java

Guys,
I am in need of 30 candidates who have experience on Oracle ADF framework along with Java. The position will be Wisconsin and the project will be contract based. The duration will be more than 6 months and rates are open.
If you or your friends are interested in this offer, please send your resumes to [email protected] with a subject "Resume for Oracle ADF position".
Thanks
Srini

Dear Sir,
With reference to the website of your company I came to know that there always are the vacancies for the suitable candidates and hence I wish to apply for the same.Currently working in hydraulic environment I am approaching you through this application with great enthusiasm, that I have scope and chance to show my ability and contribute my efforts in well direction. I am enclosing here with my complete Curriculum Vitae .
I am currently working with M/s Minar Hydrosystems PVT. LTD. in Nagpur which is one of the largest manufacturers of hydraulic/pneumatic cylinders, jacks etc. I am In charge for quality department having complete knowledge of instruments with level II in non destructive and automated non destructive techniques. Also handling SAP module in current company with effective administration.
If you need further information regarding my candidature please do write/call me.
Thanks & Regards
Rushikesh P. Deogade
Nagpur, India
Ph.:- +91 9923858523
Attachments:
B.E. Mechanical with 3 years exp as a QC Incharge.doc ‏25 KB

Job Opening for Labview Test engineer and Senior Labview Test engineer in Honeywell Automation India Limited,Pune

Similar Messages

Maybe you are looking for