Job openning for Labview developer with fiber optical experience, Fremont

I have a job openning for Labview developer  with fiber optical experience,  Fremont, CA
If you have interesting, reply this email ASAP.

Continued here

Similar Messages

  • Job openning for Labview developer with fiber optical experience

    job openning for Labview developer  with fiber optical experience

    I am a Test Engineer with 10 years LabVIEW experience, as well as TestStand, VB6, C, Assembly language, programming
    also experienced with electronics/hardware, and a talented problem solver
    I worked for CIENA Corporation writing automatic testing software for their fiber optic products (DWDM)
    Available due to plant closing
    please contact me at [email protected]
    thank you

  • Opening for LabVIEW developer

    Cosmic Circuits has a job opening for LabVIEW programmer with 3-4 yrs of experience. If interested, please reply to this post.

    Helllo Sir,
    I am interested to apply. I am Certified LabVIEW associate Developer. May I know the job location.
    and please tell me the mail id, to send my updated CV. 
    Thanks
    SIVA

  • Looking for LabVIEW Developer with 2-3 years of experience for Mumbai based Company

    Software Plantation, Mumbai is currently looking for LabVIEW Developer who can contribute to the development of automated test, data acquisition, and control systems using National Instruments LabVIEW.
    This position is located at Lokhandwala, Andheri West, Mumbai.
    Requirements:
    Applicant must meet the following criteria:
    2+ years of LabVIEW experience.
    Should be from Engineering background.
    Knowledge of various communication protocols like RS-232, Modbus, USB, etc.
    Knowledge of NI DAQ hardware boards.
    Automated test, measurement, data acquisition, and/or control experience.
    Good at documentation.
    Knowledge of Software Development Cycle
    Must be able to meet objectives as directed.
    Ability to effectively work independently.
    Ability to contribute and work in a team environment.
    Ability to adapt to changing requirements, rapidly absorb new concepts, and apply them effectively.
    Good communication skills.
    CLAD certified developer will be preferred. Knowledge of C/C++, Linux is an added advantage.
    If your background and qualifications match this position, please send your resume via email with subject line as: 'LabVIEW Developer Application'.
    E-Mail: [email protected] 
    Note: Please do not post your resume on the job forum. Mail it to the above mentioned email ID.

    Kindly send me your resumes on [email protected]

  • Looking for SAP Developer with HR/Payroll experience

    Hi All,
    We are currently recruiting for an SAP developer with HR/Payroll experience for a permanent role in Canada.
    For more details please email me at [email protected]

    I need a functional consultant that has done configuration in SAP HR Payroll.
    Michelle Yang
    Vice President
    Direct(925) 989-7337
    [email protected]

  • Job Opening for Labview Test engineer and Senior Labview Test engineer in Honeywell Automation India Limited,Pune

    Job Openings at Honeywell Automation India Ltd., Pune
    Honeywell Automation India Ltd, Pune is currently looking Senior and Junior Labview Test Engineers.
    Position -Permanent
    Job Location: Pune,India.
    Job description is as follows:
    For Senior Labview Test engineer Position: (4-6 years)
    Primary Skills:
     • Should be an expert in NI Labview.  
    • Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW RealTime/FPGA toolkit etc
    • Experience on hardware test automation using NI and third party hardware
    • Candidate should have knowledge on various protocols such as RS-232, GPIB, MODBUS, Ethernet,Devicenet, Profibus using NI LabVIEW.
    • Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
    • Ability to work independently with our clients for gathering requirements, preparing various test plans, coding & testing, Installation & support
    • Candidate should have good communication skills, presentation skills and interpersonal skills.
    • Knowledge of analog and digital electronics that includes schematic reading and understanding
    • Knowledge on Database, driver development, communication protocols
     Niche Skills:
    • Knowledge of Project Development Life Cycle
    • Experience in NI Teststand/ LabWindows
    • Good Communication Skills
    • Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
    • Project deployment at client site
    • CLD (certified labview developer)
     Added Advantage:
    • Ready valid passport / VISA will be a plus point.
    • Candidate need to travel abroad depending on project requirements.
    • Shorter joining period.
    • Ready to relocate to Pune
    For Junior Labview Test engineer Position: (2-4 years)
     Primary Skills:
    • Candidate should have worked in NI LabVIEW for atleast 2-4 Years.
    • Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW Database toolkit,etc..
    • Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
    • Candidate should have good communication skills, presentation skills and interpersonal skills.
    • Knowledge of analog and digital electronics that includes schematic reading and understanding
    • Knowledge on Database, driver development, communication protocols
    Niche Skills:
    • Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
    • Project deployment at client site
    • CLAD (certified Labview associate developer)
    Added Advantage:
    • Ready valid passport / VISA will be a plus point.
    • Candidate need to travel abroad depending on project requirements.
    • Shorter joining period.
    • Ready to relocate toPune,India
    Please Forward your updated profile to [email protected]

    Dear Sir,
    With reference to the website of your company I came to know that there always are the vacancies for the suitable candidates and hence I wish to apply for the same.Currently working in hydraulic environment I am approaching you through this application with great enthusiasm, that I have scope and chance to show my ability and contribute my efforts in well direction. I am enclosing here with my complete Curriculum Vitae .
    I am currently working with M/s Minar Hydrosystems PVT. LTD. in Nagpur which is one of the largest manufacturers of hydraulic/pneumatic cylinders, jacks etc. I am In charge for quality department having complete knowledge of instruments with level II in non destructive and automated non destructive techniques. Also handling SAP module in current company with effective administration.
    If you need further information regarding my candidature please do write/call me.
    Thanks & Regards
    Rushikesh P. Deogade
    Nagpur, India
    Ph.:- +91 9923858523
    Attachments:
    B.E. Mechanical with 3 years exp as a QC Incharge.doc ‏25 KB

  • LabVIEW developer with 7 years experience looking for a contract or permanent position

    Hello all,
    I'm a 7 years experience LabVIEW Programmer with BSc. I'm expert in the following field:
    -LabVIEW (5.x, 6.x, 7.x, 8.0)
    -DAQ, RS232, GPIB, USB
    -Vision (Imaq)
    -LabVIEW RT (PXI, fieldpoint, Desktop PC Real Time), Embedded development
    -Goop
    -Databases (MSDE, MSSQL Server)
    Currently living in Switzerland and still employed in a big company, I'm loooking for a permanent job or contract in USA, Central and south America, India or Australia. I speak English, French, German, Portuguese and have some spanish knowledge. 
    Thanks in advance for any offers and/or tips.
    Regards
    [email protected]

    Bonjour Jerry,
    Je travaille au recrutement de personnel chez Averna et nous sommes actuellement à la recherche de ressources pour des opportunités permanente à titre de concepteur logiciel de test (Labview). Le poste est situé à Montreal, au Canada. Pourriez vous être interessé par cette opportunité? N’hésitez pas à communiquer avec moi pour plus de détails! Dans l’attente de votre réponse, je vous souhaite une bonne journée, Cordialement, Armelle FOUCHER
    Consultante
    T (514) 842-7577x509    |    [email protected]  

  • Looking for LABView Programmer with Electrical Engineering Experience ($75K-$85K)

    If you wish to apply send resumes to: [email protected]
    Position Summary:
    Systems Engineer with experience in LabVIEW development, instrumentation interface and system control. The engineer is expected to develop the software and GUI, select and integrate necessary instrumentation to meet requirements and properly document design. In addition, the engineer is expected to be able to specify electrical and electronic interfaces necessary in the development of a system. 
    Essential Job Functions (listing most important first):
    Will develop the software and GUI necessary to implement a data acquisition and control system.
    Will select appropriate hardware instrumentation and control interfaces and integrate OEM and in-house equipment.
    Will provide guidance in the development of electrical interface, schematic and wiring diagram of systems.
    Will use electronic test equipment (Voltmeters, oscilloscopes, etc.)
    Will generate software documentation such as requirement document, user manual, test procedures, test reports etc
    Essential Job Requirements:
    EDUCATION
    Bachelor degree (BS) in computer, electronic, or systems engineering or a related technical discipline.
    EXPERIENCE
    Experience in LabVIEW development. Experience in PXI, DAQ systems, RS232 communications preferred. Five or more years of related experience.
    REQUIRED SKILLS
    Able to develop the software and GUI necessary to implement a data acquisition and control system.
    Able to select appropriate hardware instrumentation and control interfaces and integrate OEM and in-house equipment.
    Able to understand schematic and wiring diagrams.
    Able to use electronic test equipment (Voltmeters, oscilloscopes, etc.)
    Generate software documentation such as requirement document, user manual, test procedures, test reports etc
    PREFERRED SKILLS
    LabVIEW, Control & DAQ instrumentation, Serial Communications

    Hi Andre,
    You may get more success if you post to this forum:
    http://forums.ni.com/ni/board?board.id=JobPost
    Ray
    ( tbob, are you busy these days?  )
    Message Edited by JoeLabView on 11-09-2005 12:40 PM

  • Job opening for Oracle ADF with Java

    Guys,
    I am in need of 30 candidates who have experience on Oracle ADF framework along with Java. The position will be Wisconsin and the project will be contract based. The duration will be more than 6 months and rates are open.
    If you or your friends are interested in this offer, please send your resumes to [email protected] with a subject "Resume for Oracle ADF position".
    Thanks
    Srini

    Dear Sir,
    With reference to the website of your company I came to know that there always are the vacancies for the suitable candidates and hence I wish to apply for the same.Currently working in hydraulic environment I am approaching you through this application with great enthusiasm, that I have scope and chance to show my ability and contribute my efforts in well direction. I am enclosing here with my complete Curriculum Vitae .
    I am currently working with M/s Minar Hydrosystems PVT. LTD. in Nagpur which is one of the largest manufacturers of hydraulic/pneumatic cylinders, jacks etc. I am In charge for quality department having complete knowledge of instruments with level II in non destructive and automated non destructive techniques. Also handling SAP module in current company with effective administration.
    If you need further information regarding my candidature please do write/call me.
    Thanks & Regards
    Rushikesh P. Deogade
    Nagpur, India
    Ph.:- +91 9923858523
    Attachments:
    B.E. Mechanical with 3 years exp as a QC Incharge.doc ‏25 KB

  • Does anyone know how to access the sound software on a Mid 2010 Mac Pro? I have a Logitech Z906 5.1 surround system with fiber optic in and out, I only seem to be able to get stereo and simulated 5.1 sound .

    A mid 2010 Mac Pro, trying to get 5.1 surround out of the onboard sound software using fiber optic out connected to a Logitech Z906 5.1 speaker sys. with fiber optic in and out, all I get is stereo and simulated 5.1 sound out of the speakers. In utilities, Audio Midi Setup I can't get the Mac to see the Logitech speakers for 5.1 speaker configuration. Without being made to feel like a dummy, does anyone have a solution? Thanks, Carl

    Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
    One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
    Carl

  • Need MBAM 2.5 Helpdesk and selfservice sites to open for authenticated users with no password prompt

    I Need MBAM 2.5 Helpdesk and self service sites to open for authenticated users with no password prompt. I just cant seem to get this to work. The account used in the application pool has its SPN registered and delegation set. I can use that account to login
    to the sites but am prompted for a password. That said anyone I add into the helpdesk users group cannot negotiate the sites. Only the account I have set in the application pool can. I want domain authenticated users that have been added to the MBAM Help Desk
    Users group to negotiate the site with NO password challenge at all.
    tconners

    This generally means that your SPN is not set up correctly.  Let's say the web server you installed the SSP on is lance.contoso.com and your app pool creds are corp\lance.  You should set an SPN similar to setspn -s http/lance.contoso.com
    corp\lance.  In your browser, you should now be able to access the SSP without prompts.  However, if you still get prompted, generally that means that your local intranet zone in IE does not have an entry for *.contoso.com.  Since you are entering
    an FQDN in your browser, IE interprets the "." to mean "on the internet" which breaks Kerberos authentication.  By adding *.contoso.com to your local intranet zone, you are telling it that lance.contoso.com is on the intranet, so use
    Kerberos.
    I can confirm, that I have exact configuration and I always get the password promt for the very first time. We have 2 server (1xIIS and 1xSQL) infrastructure in production with SPN set like it should and I get the password prompt.

  • What technlogy is good for ABAP developer with some littile knowdge of java

    Hi Experts,
    What technlogy is good for ABAP developer with some littile knowdge of java IN SAP NETWEAVER.
    Can any one guide me for good technology for todays market.
    Thanks
    Edited by: sdnhelp on Jul 15, 2009 1:50 PM
    Edited by: sdnhelp on Jul 15, 2009 1:51 PM
    Edited by: sdnhelp on Jul 15, 2009 1:51 PM

    Hi,
    you can choose PI of netweaver.
    Regards,
    Muralidhar

  • Job oppurunities for Labview developers in India

    How is job oppurunities for Labview developers in India?

    There are two job boards available.  This forum is explicitely for help when programming Labview.
    If you are posting (offering) a job, visit this forum: http://forums.ni.com/ni/board?board.id=JobPost
    If you are looking for a job, then visit this forum:  http://forums.ni.com/ni/board?board.id=JobSearch

  • LabVIEW CLD with 8 years experience in Austin, TX

    Hi,
    I am a Certified LabVIEW Developer with around 8 years of labVIEW experience which involves working with most of the standard industry protocols. I have worked in both lab and production environments.
    I have worked using DAQ, GPIB, PXI, VXI, Fieldpoint, CDAQ, VISION, Motion, Sound and Vibration, Mobile ....Please contact me for additional details.
    Regards,
    Jagan
    [email protected]
    256-520-7981

    Hi,
    We are looking for at least 6-month LabVIEW contractor in San Jose, CA.  Please refer to the following link if you are interested:
    http://sfbay.craigslist.org/sby/sof/243379434.html
    Thanks,
    Mark

  • Looking for SAP Developers with FI-CO experience

    Hi All,
    We are currently recruiting for an SAP developer with FI-CO experience for a permanent role in Canada.
    For more details please email me at [email protected]

    I need a functional consultant that has done configuration in SAP HR Payroll.
    Michelle Yang
    Vice President
    Direct(925) 989-7337
    [email protected]

Maybe you are looking for