Job SWWDHEX getting cancelled - Report RSWWDHEX giving dump
Hi Everyone,
All instances of the Job SWWDHEX are being shown as cancelled in the background job log (SM37). On checking the job log, I found that the report RSWWDHEX is causing dump in the system. The job log shows:
Job started
Step 001 started (program RSWWDHEX, variant &0000000000001, user ID WF-BATCH)
ABAP/4 processor: OBJECTS_OBJREF_NOT_ASSIGNED
Job cancelled
On checking ST22 for the runtime error-
Error analysis
An exception occurred that is explained in detail below. The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in procedure "IF_SWF_WFM_COMPONENT~RAISE_EXCEPTION" "(METHOD)", nor was it propagated by a RAISING clause.
The dump started happening yesterday onwards. We can't figure out what happened that started this. I tried to find some relevant notes & solutions, but was unable to find anything useful.
Any suggestions or ideas would be very appreciated. Thanks.
Hello,
Check if WF-BATCH is okay, ie password not changed and password not expired and it still has its roles.
regards
Rick Bakker
Hanabi Technology
Similar Messages
-
Job SWWDHEX getting cancelled - OBJECTS_OBJREF_NOT_ASSIGNED
Hi Guys,
Here is the scenario:
We modified WF 90000081 in dev box. In production, the workflow has been triggered and is awaiting response from agent.
WF 90000081 has been moved to production, the workitems created by the WF in production is still awaiting response from the agent.
Now, the job SWWDHEX runs after the WF is in production. The job is cancelled due to OBJECTS_OBJREF_NOT_ASSIGNED.
In ST22, here is the details:
Error analysis
An exception occurred that is explained in detail below. The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in procedure "IF_SWF_WFM_COMPONENT~RAISE_EXCEPTION" "(METHOD)", nor was it propagated by a RAISING clause.
Question: How are we going to get away with it? Is there any SAP note which can help with this? I have looked note 1422978, it seems good and could solve the issue, but when I check on the method where the fix will be implemented, I checked in the Events called in ST22, the method is not being called by the job.
Please advise.
Thank you!Hello,
Check if WF-BATCH is okay, ie password not changed and password not expired and it still has its roles.
regards
Rick Bakker
Hanabi Technology -
Job E2E_HK_CONTROLLER getting canceled daily after EHP1 upgrade
Hi, All,
We upgraded solman system to EHP1.Since then; this job is getting canceled daily with following error:
Job Log:
Job started
Step 001 started (program E2E_HK_CONTROLLER, variant , user ID SMD_RFC)
Internal session terminated with a runtime error (see ST22)
Job cancelled
ST22 Dump log shows time out dump
Current patch level is 04
Kindly suggest how can this be solvedHi,
Details are:
Runtime Errors TIME_OUT
Date and Time 07.01.2010 01:30:54
Short text
Time limit exceeded.
What happened?
The program "SAPLRRSI" has exceeded the maximum permitted runtime without
interruption and has therefore been terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
After a specific time, the program is terminated to make the work area
available to other users who may be waiting.
This is to prevent a work area being blocked unnecessarily long by, for
example:
- Endless loops (DO, WHILE, ...),
- Database accesses with a large result set
- Database accesses without a suitable index (full table scan)
The maximum runtime of a program is limited by the system profile
parameter "rdisp/max_wprun_time". The current setting is 3600 seconds. If this
Roll.... 16192
EM...... 594970672
Heap.... 0
Page.... 16384
MM Used. 585663104
MM Free. 9274032
r and Transaction
Client.............. 100
User................ "SMD_RFC"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "4B446D5B2E061DFFE10000003630905C"
Program............. "SAPLRRSI"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "PS1"
Database Release.... 701
Kernel Release...... 701
Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." " -
SAP Standard Jobs are getting canceled
Hi Basis Gurus,
In our Quality BW 3.5 system the SAP Standard jobs are getting canceled.
The jobs are as follows
SAP_APPLICATION_STAT_COLLECTOR
SAP_CCMS_CPH_HRCOLL
SAP_CCMS_MONI_BATCH_DP
SAP_COLLECTOR_FOR_JOBSTATISTIC
SAP_COLLECTOR_FOR_NONE_R3_STAT
SAP_COLLECTOR_FOR_PERFMONITOR
SAPCONNECT ALL SEND
SAP_REORG_ABAPDUMPS
SAP_REORG_SPOOL
SAP_RSICFDLT
In SM37 when i click on the job log for the above mentioned jobs the system is promting a message saying as "Error reading job log"
Please let me know how can troubleshoot it and resolve this issue.
Our is qulaity BW 3.5 system
Solaris OS
Oracle Database
Please help me.
Regards,
Anil.Hi ,
For log display reason, try the note suggested. Jobs cancel reason may be due to that the user who schedule that job are locked or not exist on that client. Or other reason will be clear only after log display.
Ankit -
Job is getting cancelled in CPS
Hi,
We have implemented CPS on SOLMAN, and when we were submitting a job for one of the SAP system and we are using Job chain method for submiting the job.
Job is getting cancelled with the below error,please find the below error and log.
Failed to create the job in the SAP system
BAPI exception while calling BAPI_XBP_JOB_ADD_ABAP_STEP: E XM 034 Internal problem (function BAPI_XBP_JOB_ADD_ABAP_STEP) [BAPI_XBP_JOB_ADD_ABAP_STEP, , , ]
at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.checkBapiReturnCode(ClientConnectionImpl.java:818)
at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.call(ClientConnectionImpl.java:605)
at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection$4.doPerform(AbstractRfcConnection.java:289)
at com.redwood.scheduler.connector.sap.rfc.connection.RemoteFunctionCall.perform(RemoteFunctionCall.java:130)
at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection.perform(AbstractRfcConnection.java:445)
at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection.execute(AbstractRfcConnection.java:282)
at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.SapFunctionModuleWrapper.execute(SapFunctionModuleWrapper.java:194)
at com.redwood.scheduler.connector.sap.rfc.jco.AbstractSapFunctionModule.execute(AbstractSapFunctionModule.java:107)
at com.redwood.scheduler.connector.sap.rfc.command.impl.AbapRunPrintCommand.doAddSteps(AbapRunPrintCommand.java:353)
at com.redwood.scheduler.connector.sap.rfc.command.AbstractXbpJobRunCommand.execute(AbstractXbpJobRunCommand.java:177)
at com.redwood.scheduler.connector.sap.rfc.command.AbstractXbpCommand.doExecute(AbstractXbpCommand.java:123)
at com.redwood.scheduler.connector.sap.rfc.command.AbstractCommand.execute(AbstractCommand.java:56)
at com.redwood.scheduler.connector.sap.rfc.service.SapJobWork.doWork(SapJobWork.java:107)
at com.redwood.scheduler.infrastructure.workqueue.Worker.run(Worker.java:59)
at java.lang.Thread.run(Thread.java:770)This message is most of the times thrown when the parameters you specify for the job to run are inconsistent. Possibly a variant name that does not exist or is missing, maybe a printer/sap user name/application server name that does not exist in the target system.
-
Hi Friends !
We have job name RSIMPCUST scheduled by the USER ID ABC. Now this ABC ID no longer exists. Hence job is getting cancelled. In the SM37, I did tried "Repeat Schedule" but thatz also getting cancelled. How I can schedule this job on my ID? Please advise.
With Regards
RekhaHi Rekha,
In order to be able to use the job with your Id please make setting according to this docuement ::
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b6b739-47a6-2e10-9abf-bdac1124dde1?QuickLink=index&overridelayout=true
Regards,
Arpit -
Job SLCA_LCK_SYNCHOWNERS getting cancelled
Hi Guyz,
We had job "SLCA_LCK_SYNCHOWNERS " getting cancelled everyday. Im not understanding what this job is doing. When i search in SAP Market Place this talks more as a job in MaxDB or some Live cache related. Could anybody tell me wht this job is doing , is it necessary in our BI system, our DB is Oracle 10g and OS in HP-UX.
Thank youIf this is not a LiveCache system, then you can just remove the job. This is scheduled by default in the SAP Standard Jobs area if you click the 'Default scheduling' button.
Hope that helps.
J. Haynes -
The Job SAPRUPGM gets cancelled
Hi Experts!!!
We have recently updated tp and r3trans.When ever we are applying the support packages they are imported successfully
but we have found that the job SAPRUPGM is getting cancelled,Once it runs and the other time its cancelled.The folowing is the
Step 002 started (program ENH_SAPRUPGM, variant , user ID DDIC)
Step 003 started (program ENH_CREATE_ENHCROSS, variant , user ID DDIC
ABAP/4 processor: DBIF_RSQL_SQL_ERROR
Job cancelled
This is the job log.
The same job was run successfully just 20 min before this cancelled job.
Regards,
Vamshi.Hi Ruchit,
We are on SPAM26 and every time when we defined queue it was asking whether we want to add the request to the import queue or not then this time we have selected no.The job was not cancelled this time. I think i should apply the note which you have provided.
Regards,
Vamshi. -
Crystal report PLD giving dump error during preview
Hi,
I have developed a Crystal report PLD for A/R Credit Memo (RIN1). It is working perfectly while running from Crystal report interface. After importing the same from Report and Layout Manager in SAP, while trying to view the preview it is giving dump error. Can anyone help me out in this regards.
Thanks in advance.Hi,
Check SAP note:
1562837 - Previewing/printing some Crystal Reports layouts crashes
B1
Thanks & Regards,
Nagarajan -
RDDEXCEL job is getting cancelled
Dear All,
While transporting the request, the request ending with error code -12 , when i checked the log its showing RDDEXCEL JOB is cancelled , This is happening for every request .
Thanks in advance .
Thanks
S SURESH
<subject_modified>
Do NOT use UPPERCASE on the subject
Read the "Rules of Engagament"
Edited by: Juan Reyes on Mar 25, 2010 9:43 AMHi,
Please check the below links which could help in resolving your issue.
EXECUTION OF REPORTS AFTER PUT finsished with returncode 12 in spam
Xpra_execution phase error execution of report return code 12
Re: Upgrade NW640 to NW 700 - XPRAS_UPG - dump CALL_FUNCTION_PARM_MISSING
Regards,
Sharath -
Job getting cancelled with Tbale_illegal_statement dump
hello,
Hi Experts,
i have a background job scheduled for a standard transaction SARA .it is getting cancelled and giving the following error:
"TABLE_ILLEGAL_STATEMENT"
Information on where terminated
The termination occurred in the ABAP program "SAPLCKMLLAARCH" in
"CKMLLA_INIT_READ".
The main program was "RKSARCDL ".
The termination occurred in line 253 of the source code of the (Include)
program "LCKMLLAARCHF01"
of the source code of program "LCKMLLAARCHF01" (when calling the editor 2530).
The program "SAPLCKMLLAARCH" was started as a background job.
The line it is giving Dump Is > INSERT handle_tab.
I have tried to debug the transaction but the execution is not ata all going to the program
SAPLCKMLLAARCH where it is giving dump.Propably because that program is running in Background.
So please let me know how I can fix this issue..PleaseHi Prashanth,
Were you able to resolve the issue ? Because, i am also facing the same problem, when I am triggering the Delete step for CO_CCMAST archiving object.
Regards,
Shail. -
Report program when run in background job getting cancelled immediately
Hi
When i run a program in foreground i am able to see the output. But when run in background not able to run the job successfully. The job is getting cancelled immediately.
I am using the below function module for output display. Should i need to pass any parameters in the below function module so that i can run the program in background successfully.
CALL METHOD DETAIL_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = IS_LAYOUT
I_SAVE = 'A'
IS_VARIANT = GS_VARIANT
CHANGING
IT_FIELDCATALOG = IT_FIELDCATALOG
IT_OUTTAB = BLOCKED_STOCK_TAB_ALV[].
Please suggest.
Thanks and regards
Rajani YeluriHi Rajani.
ALV require the DRYPOR(screen) for display but incase you run in back ground which have to write to spool but in spool we can only write in format of LIST REPORT not inter-active report like ALV. That why
system cancelled your process immediately.
Hope it helps.
Sayan. -
RDDGENOL job getting cancelled with huge number of ABAP dumps
Hi,
In our Production system, we had applied Kernel upto patch level 263 and while
applying SPAM 30 for release 640 it failed. We tried applying Basis patch 15 still
it did not went through.
Since then we are getting around 1500-2500 dumps daily. The job RDDGENOLis getting cancelled and the dumps RAISE_EXCEPTION and SYNTAX_ERROR is displayed in ST22. Today, there were around 2500 dumps in the system.
When I now run the Database <-> ABAP Dictionary consistency check in
DB02, I see number of errors for missing objects in the database. There
are around of dozens of Primary Indexes, secondary Indexes, Tables,
Views listed in the result:
Objects Missing in database No.
=========================== ===
Primary indexes 6
Secondary indexes 14
Tables 37
Views 26
When I try to create each of them using SE16 or using SQL utility on OS
level, it gives an SQL system error. We are also getting thousands of
dumps each day (attached alongwith this message). Also I see the CPF327E error
in the OS Level Joblog.
Also we cannot transport any requests. There is some problem with or
due to the conversions. Is it a problem with Kernel, ABAP dictionary or
database.
Following is the extract of the dumps due to DDIC in 000:
============================================================
Runtime Error SYNTAX_ERROR
Date and Time
ShrtText
Syntax error in program "CL_WB_CROSSREFERENCE==========CP ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLSEWB" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "CL_WB_CROSSREFERENCE==========CP ", the following syntax error
occurred
in the Include "CL_WB_CROSSREFERENCE==========CM00D " in line 8:
| "The type "KEYWORD_TAB" is unknown."
============================================================
============================================================
Runtime Error RAISE_EXCEPTION
Date and Time
ShrtText
Exception condition "DESTINATION_NOT_OPEN" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
A RAISE statement in the program "SAPLCRFC" raised the exception
condition "DESTINATION_NOT_OPEN".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
Specified destination is not open.
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"RAISE_EXCEPTION" C
"SAPLCRFC" or "LCRFCU20"
"RFC_CONNECTION_CLOSE"
or
"SAPLCRFC" "DESTINATION_NOT_OPEN"
or
"RADBAT01 " "DESTINATION_NOT_OPEN"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "TXTPDSAP"
Network address.......... "172.16.0.140"
Operating system......... "OS400"
Release.................. "5.3"
Hardware type............ "0065000655EC"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 35
Short dump setting....... "full"
Database server.......... "TXTPDSAP"
Database type............ "DB400"
Database name............ "TXT"
Database owner........... "R3TXTDATA"
Character set............ "en_US.ISO8859-1"
SAP kernel............... "640"
Created on............... "Dec 11 2008 23:06:45"
Created in............... "AIX 1 5 00538A4A4C00 (IBM iSeries with OS400)"
Database version......... "DB4_52"
Patch level.............. "263"
Patch text............... " "
Supported environment....
Database................. "V5R2, V5R3, V5R4, V6R1"
SAP database version..... "640"
Operating system......... "OS400 2 5, OS400 3 5, OS400 4 5, OS400 1 6"
Memory usage.............
Roll..................... 696832
EM....................... 16759712
Heap..................... 0
Page..................... 32768
MM Used.................. 1383120
MM Free.................. 3483600
SAP Release.............. "640"
User and Transaction
Client.............. 000
User................ "DDIC"
Language key........ "E"
Transaction......... " "
Program............. "SAPLCRFC"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLCRFC" in
"RFC_CONNECTION_CLOSE".
The main program was "RADBAT01 ".
The termination occurred in line 22 of the source code of the (Include)
program "LCRFCU20"
of the source code of program "LCRFCU20" (when calling the editor 220).
The program "SAPLCRFC" was started as a background job.
Job name........ "RDDGEN0L"
Job initiator... "DDIC"
| Job number...... 00032101
============================================================
Kindly let me know the immediate fix. Thanks!
Regards,
NickHi Nick,
I would say, you are having a slight missperception of this forum ... it should not replace your basis ressources in your company.
What you are doing is pretty complex (and the mixtrure of SPAM Update AND Basis SP seems to be wrong to me) and therefore, it will not be possible, to help you, just based on such a short dump.
Sorry,
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de -
FM ARCHIVE_SCHEDULE_JOB giving dump as background job?
Hello Everyone,
I am scheduling a report in SM37 which consists of FM ARCHIVE_SCHEDULE_JOB.
And based on the output of FM, some Ztables are updated and some jobs are created in sm37.
Now, when i debugged the background job, i found out that Fm is giving Dump 'NO_RUNTIME_INFO' since sy-batch is not initial.
Due to which Ztables are not updated but the jobs are created....
Can anyone please help me what should i do on this case?
Edited by: Suruchi Razdan on Jun 2, 2011 9:45 AMHi Akshay,
II have copied the Std workflow WS20000075 into a custom one and in the latest end tab, i have selected "Workitem creaton" for Refer Date/Time field and given 5 mins. I have deactivated the workflow in which i have created the containers for date and time and used "Expresion" for latest end and also commented the zmethod in delegated object. Even now also the job is getting cancelled with the same error.
Any idea why is it happening ?
regards,
Trimurty -
Hi All,,
We have a job" UPC_BUNDLE_EXECUTE" which is getting cancelled everyday
here ar
Job started
Step 001 started (program UPC_BUNDLE_EXECUTE, variant &0000000000000, user ID )
Global planning sequence was terminated with errors
Job cancelled after system exception ERROR_MESSAGEHi,
I have already checked... but no dumps exits..
but this job is getting cancelled daily...
can anybody throw a light on this...
appreciate your guidance
Regds
Maybe you are looking for
-
Why do I have to login twice after sleep mode?
Until recently I have been able to login one time with a password to get to my desktop. Now I have to login twice and I have no idea why. I am running Yosemite, whatever the newest version is. I'm not too tech savvy, but have checked every setting I
-
When I attempt to upgrade I get the message C:\Documents and Settings\Administrator\Local Settings\Temporary Internet Files\Content.IE5\C1SD2ZCX\iTunesSetup[1].exe is not a valid Win32 application. Any help will be appreciated. David Windows XP
-
Hi all , i need to built a Interface program for Uploading a Invoice (as a IDOC file) , we r geting a file in IDOC format from Vendors , we need to update this file into Inbound Side By using EDI Scenario , pls help me out step by step procedure for
-
After update illustrator CC 17.1 didn't launch.
Can anyone help? After updating to 17.1 illustrator cant launch. Did anyone have the same problem with me? My OS is windows 8.1 Illustrator
-
[Solved] Set domain name on systemd system
Since the demise of rc.conf I have been unable to find out how to set the system's domain name. I tried "hostnamectl set-hostname hostname.domain" but it just set the hostname to "hostnamedomain". I also tried setting it manually through the hostname