JOBS IN LABVIEW

Hi
I have been doing a lot of programming in LABVIEW over the past one year
and completed a lot of projects as part of my university research and classes.
I am still not clear if there are a lot of jobs in LABVIEW. Do they pay well?
Is it worth making a career out of it?
Thanks,
AJAY

I worked for Lockheed Martin for 5 years and earned a great living and achieved
many successes using LabView for process control in a Six Sigma Blackbelt
Process Engineering role. I have seen it in other industries also, particularly
automotive, pharmaceutical, and other types of research and manufacturing
where process control is critical. I would look at the user solutions on
the National Instruments website and do a search for jobs that require labview
and see how many bites you get. While the person you spoke with may not
have seen it, I have. Good luck!
"Jeffrey L. Nesiba" wrote:
>At a recent engineering open house, I spoke to a Process Control Engineer>who
was partner in a consulting firm. He said that he has not seen
the use>of
Labview in a commercial environmnent and that it largely remains an>academic
tool (at least as far as Process Control Engineering is concerned).>>Jeff>>ANAND
wrote in message>news:[email protected]..>>>>
Hi>>>> I have been doing a lot of programming in LABVIEW over the past one
year>> and completed a lot of projects as part of my university research
and>classes.>>>>>> I am still not clear if there are a lot of jobs in LABVIEW.
Do they pay>well?>>>> Is it worth making a career out of it?>>>> Thanks,>>>>
AJAY>>

Similar Messages

Fresher with PG Diploma in Industrial Automation, seeking a job in labview

Hello.,
I'm a recent PG Diploma Graduate in Industrial Automation (Including LabVIEW) seeking for a job in LabVIEW Sector. I'll be greatful if someone could help me to know industries where i can apply for a job relating to PLC SCADA DCS or LabVIEW.
Mail me at [email protected]
Thanks in advance,
-Siju
Attachments:
Siju_cv-21-1-2014.pdf ‏159 KB

Hi Sir/Madam,
I am recently Completed my PG Diploma Graduate in Industrial Automation and System Design from National Institute of Electronics and Information Technology (NIELIT) Calicut,kerala with 72.2%. I am good labVIEW programer and i am seeking for job in labVIEW Sector, can you please help me to know the job vacencies in labVIEW Sector/Automation and i am also well good in PLC programming.
Please find the attached resume.
Thanks & Regards,
Ravi Kumar
+91-9000324146
E-mail: [email protected]
Attachments:
resume ravi new formetpdf.pdf ‏65 KB

How hard is finding a job in Labview field?

Hello Everyone,
This is just a kind of poll that I want to do for people looking out for jobs in Labview field. I have seen people looking for job and still looking for job for almost months. I am one of them but would like to understand the situation overall.
Answer two questions
1)How hard is finding a job in Labview?
a) Hard
b) Easy
c) Moderate
2)What is the greatest obstacle?
a)Jobs are location specific
b)Experience required
c)Type of experience required
d)More reasons
Hope you will find some time to answer the questions.
CLAD
Using Labview 5.1,6.1,7.1.8.0

My answers
1) (a)
2) (c)
Here are my 2 cents
Keep polling
CLAD
Using Labview 5.1,6.1,7.1.8.0

Recent graduated Control-Systems (embedded) enginneer, with experience in France/lebanon/Switzerland Looking for a Job With Labview

I am currently recently graduated from the University of Technology in Belfort-Montbeliard (France).
Master’s grade of “Electrical and control systems engineering”.
I am currently looking for a job in automation, control systems and electronic domain (I prefere LabView Developpement)
Salim DARWICHE
1 rue antonin artaud
31320 castanet tolosan
Tel: 0033.6.85485107
Email : [email protected]
Nationalities :
- French
- Lebanese
Date and place of birth:
April 18, 1986
Toulouse,
France
Education
2009
Master in Electrical and Control Systems Engineering
Option Embedded
systems
University of technology of Belfort-Montbliard france
2006 University
Diploma in Industrial and Maintenance Engineering
DUT Degree Equivalent to 3 years of
technical studies
Institute of technology of Saida
Lebanon
Experience
February
July 2009 Galley-Technologies (Neuchatel-Switzerland)
Mission:
Development of
Labview Modules for Pharmaceutics and Robotics
industries
Realization(s):
Communication and data-Analyse Software using
TCP/IP:
- Development of a software (Labview Programming) that would permit data
transfer between many pharmaceutical ovens, in order to analyse all production cycle, and test
the conformity of the final products.
5 Axis robot simulation software:
Concept and development of simulation tool for a robot working cycle
September 2007
February 2008 Valeo VSS (Paris France)
Mission:
Qualification and management of
automobile electronic components
Qualification of specific electronic components
Making sure that all electronics components will be qualified on time before the
Start-of-Project
- Discussion between me, Valeo supplier and Valeo Project Manager in order
to grant Valeo quality standard Specifications or to approve supplier deviations.
Management of electronic qualification documents on Valeo ePLM system.
- Participating to
daily quality reviews meetings and brainstorming in order to apply a PDCA (plan Do Check
Act)
Management of Valeo DSA products under IMDS Base
- Management and
declaration of Valeo Division Systems Access products under IMDS base (international Material
data systems)
- Creating MDS sheets then sending them to Automobile
Constructors.
February June 2006 United-Group Machinery
(Beirut-Lebanon)
Mission:
Renovating a bag-filling
machine
Realization(s):
Mechanical system
- Drawing all parts of
the machine (3D), assembly and motion using Autodesk Inventor.
- Unmount, replacing bad
parts then assembly of the machine.
- Integrating of a weigher machine to the top of the
bag-filling machine.
Control system
-Removing old control system and
integrating a PLC and a control panel
-Programming the PLC (Delta type) with Ladder
diagram.
Knowledge
Languages
French
and Arabic: Native languages.
English: fluent, TOEIC 890/990 Test of English for
International Communication.
Spanish: Intermediate.
Automation
- Labview,
Matlab Simulink
-Programming DSP Controller TMS320LF2407.
-Programming in languages:
assembler, C.
- PLC Programming (Crouzet, Delta, tlmcanique, Moller) -Ladder, List,
Grafcet-
-Controlled systems: Continuous aspect
Electronics
-Programming in
VHDL.
-Programming of PIC 16F87X.
-Simulation (Simplorer, Circuit maker, Electronic
Workbench, Proteus, Kicad).
Electrical
- Machines D.C. current, synchronous,
asynchronous, electrical supply networks.
Various
- CAD: AutoCAD, Autodesk
Inventor, Mastercam, Programming of machines with numerical control CNC (languages Num, Fanuc,
Fagor).
-CAM: Ms-Project (Gantt, Pert, Kanban)
Message Edité par salimo le 11-04-2009 04:35 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**
Attachments:
CV_Salim_Darwiche_S_12_10_09.doc ‏77 KB
CV_SalimDARWICHE_EN_S.doc ‏229 KB

Message Edité par salimo le 11-04-2009 04:36 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**

CLAD Certified LabVIEW developer with 6 months exp seeking for Job in LabVIEW/Embedded

Hi,
I am currently working at CC Engineers Pvt. Ltd. as a software developer in LabVIEW and seeking for a job change. Please find the skillset, project  and certification information below.
Academics:
B.E. Electronics with 70.90% on degree.
Objective: To make use of the knowledge acquired by interest, skill and education for the personal growth of the organization in development of various applications in LabVIEW. Summary of Skills:
● Good knowledge of NI LabVIEW with CLAD certification● Good knowledge of C programming● Basic knowledge of SQL, PL/SQL, RDBMS concepts● Basic knowledge of Linux, Macintosh OS● Good knowledge of Windows 98/XP/Vista● Good knowledge of Computers, Hardware, Latest Technologies Certifications:
● Certified LabVIEW Associate Developer (CLAD), National Instruments. ● NI LabVIEW from YCCE college, Nagpur. ● Oracle9i from Concourse, Nagpur. ● Programming excellence through C from Kanetkar’s Institute of Computing &      Information Technology(KICIT) Pvt. Ltd, Nagpur. Work Experience:
Currently working at CC Engineers Pvt. Ltd, Pune as a software developer in LabVIEW from past 6 months.     Projects Undertaken :
● Railway Braking System Fault Trainer using NI LabVIEW 8.5:Company: C.C. Engineers Pvt. Ltd.Description:An invaluable aid in the effective understanding and troubleshooting of the faults associated with Railway Coach Air Braking System. The fault trainer has a teacher panel that can be kept out of student control. The teacher can create faults using this panel. The student panel has an array of buttons necessary to monitor various system parameters respectively. The student then has to follow laid down fault finding procedure and locate the fault. ● DIESEL ENGINE TRAINER using NI LabVIEW 8.5:    Company: C. C. Engineers Pvt. Ltd.     Description:     Diesel Engine Trainer is process of testing faulty Loco. The main goal of our        project was to simulate faults occurring in Diesel engine for railway trainees.      Software was divided into two parts Teacher and Student. Teacher selects      fault and student finds out particular cause of fault. Student finds fault using      Symptom, Input Description and remedial action. Input Description is      accessed from hardware having 32 buttons using RS232 communication. Two       Monitors divided by NVIDIA Graphics card were used. ●   Simulated Data Acquisition and Device control using NI LabVIEW 7.1:Description: Input was taken as temperature through a thermocouple from DAQ device. The LabVIEW code would accept this input and record its average value along with the values of voltage and current, over given time in a text file. If the temperature exceeded a fixed threshold value, the DAQ would send an output signal through one of its configured ports which would control a bulb through a relay. This LabVIEW Code could also be controlled remotely through internet, or on a Local Area Network. If my skillset match any open positions, please mail me to [email protected]
Thanks a lot!
-FraggerFox!
Certified LabVIEW Architect, Certified TestStand Developer
"What you think today is what you live tomorrow"

Dearest Friend,I AM most interested in this position. PLEASE forward, to, me the (MAIL ID) ID for which I send the RUSME for this position and attacha lll conntact detailes available at this time. We are requiiring you prom,t and cisrterous replies to this topic . Many Greatful Thanks to you and all,Sajib Nowdhury

Seeking Job in LabVIEW

Hi,
Please go through the attached resume.
If anyone interested please reply & mail me @ [email protected]
Regards
Vipin Kumar
Attachments:
Vipin Kumar.docx ‏26 KB

This thread is for companys' that are looking to hire to post their jobs. The only ones looking at this thread are usually those that are posting the job opening or those looking for work. There is a thread to post your availability
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Job Opening - LabVIEW Software Engineer

Belcan is an entrepreneurial and market driven organization committed to quality and customer satisfaction. Belcan is among the top 10% of the largest engineering firms in the country with over 6500 employees at 60 locations. The Advanced Engineering and Technology Division (AETD) of Belcan is a global provider of highly technical engineering services to a wide variety of industries.
We are currently looking for a LabVIEW Software Engineer to design and develop LabVIEW software based automated test systems for advanced jet engines, digital controls, electrical systems, and digital avionics.
Requires a Bachelor's degree in Electrical Engineering, Computer or Software Engineering or a related field, and 3 years of experience with National Instruments LabVIEW and other National Instruments products and technologies. Familiarity with the application of engineering concepts, practices, and procedures for: a) the development of digital system hardware interfaces b) interfacing computers, c) designing and developing automated test systems, data systems, and instrumentation. Familiarity with Real Time Operating Systems, embedded systems, and aircraft communications protocols is a plus.
Due to the nature of the work being done applicants must be U. S. Citizens or permanent residents. These are direct full time positions. We offer a very competitive compensation and benefits program. Please email your resume to [email protected] Belcan is an equal opportunity employer. EOE/M/F/D/V

The postion is located in Cincinnati, Ohio.

Job Opening - LabVIEW (Bangalore & Noida Location)

Looking for Labview certified candidates with 2-3 years of experience for Sankalp semiconductor, Bangalore Location and 3-5 years of experience for Noida. Relevant candidates can mail your updated profiles to [email protected]

Madam,
I am extremely delighted to know that there is a demand for LabVIEW programmers at your firm.
I am an electrical engineering graduate with my final year project on LabVIEW. The title was "REMOTE MONITORING AND CONTROLLING OF HOME APPLIANCES VIA INTERNET USING LabVIEW"
If you are interested me and my batchmate who is also an enthusiast is most ready to brief you our project and you can hire us on satisfaction.
We are extremely interested in LabVIEW and hope to receive a positive reply.
Regards,
Abhishek Sreekumar, Manoj M

Seeking for labview CLAD jobs

Hi,
I'm Anurag Srivastava pursuing my final yr B.E. (Electrical n Electronic) in India....I've cleared
LabVIEW CLAD certification exam....My areas of interest are Automation,Virtual
Instrumentation .....Kindly
do help me in seeking
jobs where LabVIEW
fresh engineers(CLAD
Certified) are of
demand...

Hi Anurag,
Kindly mail your resume at
[email protected]
Regards,
Amit Garg

CLAD Certification 6 months experience working on labview,looking a job in delhi or banglore location

Kumar Abhishek completed B.tech in 2012 looking for a job in labview
It is not important to know all the answers, what is important is how to find them
Attachments:
Abhishek_Resume.pdf ‏119 KB

Ineterested people can contact me at [email protected]
If anybody is also looking for outsourcing the LabVIEW development works, or planning to start a new LabVIEW development branch in India, I am interested in taking up these responsibilities.
Thank you.

I'm looking for a job in the gulf area

Hey all
i'm an experienced ALBPM Developer and designer with over 4 years of total experience in the gulf area
i'm looking for a job as an ALBPM Team Leader or a senior developer
if you can help me please send me an email on
[email protected]
[email protected]
i'm currently based in kuwait

Hi Sir/Madam,
I recently Completed my PG Diploma in Industrial Automation and System Design from
National Institute of Electronics and Information Technology (NIELIT) Calicut with 72.2%.
I've deep knowledge in PLC, SCADA, NI-LabVIEW (core 1 & core 2) Applications. I am good labVIEW Programmer and
I am seeking job in labVIEW Sector,
please help me where i could get the job in labview Sector.
Please find the attached resume.
Thanks & Regards,
Ravi Kumar
+91-9000324146
Attachments:
PENDLI RAVIKUMAR resume.docx ‏25 KB

LabVIEW programmer needed for full time position, Orange County CA

Anaheim CA 92801
[email protected]
Job Title: Project Manager
Job Type: Permanent
Job Location: Anaheim CA
Main hardware expertise required: Compact DAQ/RIO (cDAQ,cRIO), Enclosures, Cabling, Other (please comment)
Main software expertise required: LabVIEW, LabVIEW Real-time (RT)
Job Description: LabVIEW programmer needed to program and update a series of technologies while using NI CompactRIO and Single Board RIO applications. Some basic networking and basic electronics experience required.
40 hrs/wk at our Orange County facility.
What qualifications and T&M certifications do you require? Technical, LabVIEW Certified Developer Prefered
Salary Offered: $60K-80K based on experience and qualifications
The attachment is a picture of the prototype ETU unit. The DBA of the company is "GreenLink Systems," our website is www.greenlinksystem.com
Attachments:
ETU and Staff.jpg ‏186 KB

Bill,
We are able to offer you the help you need on
this. I work for a LabVIEW/test-system consulting group based here out
of Salt Lake City...not too far if a quick trip is needed. Among the
six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
contract work, local and remote. This sounds interesting and right up
our alley as far as experience goes. I'd refer you to our website for
further info about different projects that we've done for many
clients. www.mooregoodideas.com.
If this seems workable for
you, feel free to shoot me a note at [email protected] I'd be
curious to know more about what you're after and how we can help you
out.
Thanks,
Jim

Part Time, Contract Based, and Full Time Positions available for LabVIEW Developers

Mindready (www.mindready.com) is looking for flexible, hard working individuals to fill part time, contract based, and full-time/permanent jobs in LabVIEW development positions. We have immediate needs for contract labor in Dallas, TX; NY; Huntsville, AL and Austin, TX, as well as other locations. US Citizen and Security Clearance required on some projects. Mindready is a certified National Instruments Alliance Partner with facilities in Montreal, Austin, TX and (Radical Systems, Inc. – a mindready company) Huntsville, AL (www.radicalsystems.com).
The duties of the positions include:
• On and off-site LabVIEW development work. May involve TestStand, instrumentation such as PXI and stand alone instruments, DAQ, Motion, Vision, etc.)
• Willingness to travel for periods as short as 2-3 days, to as long as 6 months. (Ideal candidate would be local to any long assignment)
• Integrate into customer’s development team to design and modify new/existing LabVIEW applications.
The ideal candidate would possess the following skills & qualifications:
• Intermediate-to-advanced knowledge of LabVIEW (a pre-employment test is required)
• Broad technical knowledge is a plus, we serve a wide range of application areas
• Excellent writing, communication (English), time-management, and interpersonal skills.
• Ability to travel for on-site work at customer facilities for jobs as short as 1 week, possibly as long as 6 months.
• Discipline and organization with respect to software development and maintenance.
• Engineering, Technical or Computer Science degree or appropriate experience
• Certification is not required but would be beneficial
Pay is commensurate with skills and qualifications of the applicant. Compensation will include a competitive hourly rate.

Hi
I completed my M.S in electronics engineering and working with GE in INDIA since June 2005. I have total 20 months of experience with LabVIEW and have the follwoing skills.
Intermediate-to-advanced knowledge of LabVIEW.
Ability to analyze empirical data against theoretical predictions to enhance and improve mathematical model of system.
Familiarity with data acquisition concepts and hardware.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
you can reach me at [email protected]
Thanks & Regards
Anil Punnam

LabVIEW Developer + Software/Mechanical Engineer

Hello,
I am a LabVIEW developer with 3 plus years of experience in developing software applications for data acquisition, instrument control, motion control and image acquisition. I have a ME in Mechanical Engineering(control systems) from Texas A&M University. I am a Certified LabVIEW Associate Developer and currently working towards CLD status. I am located in TX and looking for fulltime opportunties as a Software Engineer/LV Engineer/Test Engiener. Willing to relocate, if the job is challenging and the offer is right.In addition to LV programming skills, I am experienced in J2EE,C++, object oriented methodology, UML and Visual Basic. If you are interested in my profile, send me an email and I will reply back with a full resume.Message Edited by marooner on 04-15-2005 01:30 PM

Adecco Technical is the leading provider of contract personnel and related staffing services. As a division of Adecco, the world's largest staffing company, ($13 Billion in sales), Adecco Technical has more than 100 offices in the U.S. alone.
Job Title: Labview Programmer
Labview Programmer with experience in motion control and high speed data acquisition.
RESPONSIBILITIES
The work incorporates the design and programming of specialty software for the motion control of high speed linear motors for the positioning and scanning of inline production parts.
Other projects include controls for process equipment.
This position requires a person who is well organized and can self manage a project from start to completion.
High degree of detail and the desire for perfection in the final product.
Perseverance to complete, detail, document and deploy the software.
REQUIREMENTS
A four year degree in Engineering is preferred.
Five years experience in Labview with at least three years in associating Labview in manufacturing automation and control.
The drive to accomplish projects and the need to get it right.
Thanks!
Elise Reisinger
Sr. Technical Recruiter
Adecco Technical
6081 E 82nd St., Suite 403
Indianapolis, IN 46250
317-842-2870
800-346-1203
[email protected]

Electrical Engineer with automated test experience looking for job in San Antonio Area

I am an Electrical Engineer with 33 years of experience. Much of my experience involves computer programming with an emphasis on electrical systems, either controlling equipment or automated testing. I have experience in numerous languages, most recently LabView, LabWindows/CVI, and TestStand, but also including 'C', Visual Basic, FORTRAN, and Z80 assembler. I have most recently worked in the MS Windows environment, but I have worked in the UNIX environment as well.
In addition to programming I have done some hardware design and equipment specification. I have done drafting of schematics in Visio, but I also have some experience with AutoCAD. I have written user's manuals and done hardware/software integration. I feel I have a broad range of experience in many areas of engineering and programming. I also feel that my engineering background helps be to understand the needs of the customer and thus be better able to translate those needs into the control or test program they need.
I currently live in San Antonio, Texas and am looking for a job in this area. A job on the south side of Austin might be considered if I could tele-commute or work in my home with occasional trips, eg. weekly, to Austin.

I would like to speak to you about your current work situation and the type of position you may be seeking. Currently, I am looking to hire experienced LabView programmers/Project engineers for a long-term opportunity. The following is a brief job description:
LabView Programmer/Project Engineer
Albuquerque, New Mexico
The company follows the industry with LabVIEW coding techniques. Using standards as old as VXI Plug-n-Play and as new as the parallel loop Event Structure / QueuedState Machine. This code is used as the centerpiece for Test & Measurement systems that span most industries including military/aerospace, biomedical, semiconductor, automotive and telecom.
Candidate will handle LabView integration projects from beginning to end. Will work closely with customers to understand requirements, participate in bid process, manage timelines on projects, perform LabView programming, and handle customer questions and concerns. The position requires 60% programming, 20% hardware design and test, 20% customer interface and project management. Prefer candidates with 7 to 10 years of LabView programming experience.
Ability to get a DoD security clearance required.
Please email me at [email protected] or call Sun Vega 505-342-5013 or 800-222-8406.

JOBS IN LABVIEW

Similar Messages

Maybe you are looking for