Joint Venture : tables updation for currency added to equity group

Hi All,
I want to know is there any table for joint Venture which would update the inception date for a particular equity group.
Ex : For Joint Venture ovski lets say equity group 001 has two currency NOK,USD
Later 2 new currency are added EUR,GSB so new equity group 002 has 4 currency....can we know the inception date for the added currency.
Is there any table which gets updated on the inception of new currency to a particular Equity Group against that venture.
Please do respond.
Regards,
Anu

>
anu shankari wrote:
> Please do respond.
>
Please do read the rules, they have a section about demanding responses, as well as one about posting in the right forum............

Similar Messages

Tables updating for atransaction

Hi All,
i wnat to know is there any transaction code or program to know the tables updated for a transaction.
we have a transaction called PPOM and FS00 ,i want to know which tables are updated when i create new records for these transaction codes.
With regards,
kiran I

Hi,
You can check tables CDHDR and CDPOS tables.
You can check the modified tables, values, by which transaction does this modification has been done.
Give current date to check. As these are cluster tables, it may take some time for retrieving data.
CDHDR - header details
CDPOS - item details
Regards,
Sailaja.
Dont forget to reward points, if answer helps you.
Message was edited by: Sailaja N.L.

Problem Regarding TABLE updation for Scheduling Agreement

Dear Experts,
We have noticed that whenever we are releasing any Delivery Schedule for a line item against a Scheduling Agreement the table field ABART(Scheduling Agreement Release Type) in table EKET is not getting updated,but the same field or column in TABLE EKEH or EKEK is getting updated.
Please advice what is the problem and how to resolve the same.
Regards,
Soumick

Hi,
The scheduling agreement schedule line is not firmed physically:The fixing indicator (EKET-FIXKZ) is empty for this schedule line.
This can be checked in Transaction ME39 or with Transaction SE16 for table EKET for the corresponding schedule line.
In the MRP group of the corresponding material, it is set that only transferred scheduling agreement schedule lines should be regarded as firmed (Transaction OPPR, firming scheduling agreement, Firm transmSLines [Field XFAT1]).
In this case, only such scheduling agreement schedule lines are firmed which were transferred by message transmission through purchasing to the vendor. (see also the F1 help for the field).
However, the system displays all scheduling agreement schedule lines as fixed in Transaction MD04 within the release period and assigns them with a star ('*'), that is, this applies also scheduling agreement schedule lines with a transmitted quantity of 0.
In contrast to the above, these schedule lines are not displayed as fixed in Transaction MD05 or in the planning with 'Display result'.
Note 354164 explains this system behavior.
For the planning, the transmitted quantity is considered as fixed if this is correspondingly set in the MRP group of the material.
If the transmitted quantity was updated correctly, it should be contained in field AMENG of table EKET.
By using Transaction SE16 for this table and the corresponding schedule line (scheduling agreement number EBELN, item EBELP, schedule line ETENR), you should be able to find out....
transmitted quantity was written to the database and a fixing can be carried out correspondingly in amount of the transmitted quantity or whether no update of the transmitted quantity occurred (see below Notes 82169, 117093, 134356).
Solution
First, the system behaves as intended.
It should be checked whether the function, which is controlled by this indicator, is actually wanted this way (to firm only scheduling agreement schedule lines which actually have been transferred).
In addition, problems can occur in purchasing when the printed quantity is updated (AMENG).This symptom can especially occur after you have upgraded from a release < Release 4.0A to a release > Release 4.0B.
In this regard, see the related Notes 82169, 117093 and 134356.
Regards,
Udaya.

Table updation for J2IUN available balance

Hi Experts !!
I have my "available balance" in J2IUN is wrong. So I want to correct this balance through table level. Please let me know the procedure & table names for updating this balance.
Thanks & Regards,
Aruna.

Hi,
Please check table BSIS and J_1ISERUTZ.
BR

New Price Updates for newly added Items Through VA02

Hi All,
Through VA02 ,If you change first date in line item we have written code in MV45AFZB(USEREXIT_NEW_PRICING_VBKD
) for updating price for that item.
Now the issue is if u add one more new line item through VA02 itself..here we were not getting that line item detials.because its not yet saved.
We want to update prices for newly added items also.

Hi Reddy,
For translation of any text , goto SE63 -> in menu TRANSLATION -> R/3 Enterprise - > Transport object -->
for Transport Entry of Object : R3TR SHI3 ZABC
then select target & source lang. click EDIT.
Hope this helps you.
Reagards,
Aby

Tables updated for GP12N

Hi,
On successful execution of Tcode GP12N, which tables are getting updated?
Thanks,
Asha

T8PL00                              FI Planning: Installed Plan Tables
T8PL01                              FI-Planning: Summary Table Dimensions to be Planned
T8PL01DD                          FI Planning: Dimensions Table Index - Dictionary Information
T8PL01DP                          FI Planning : Field Dependency for Validation
T8PL01S                           FI-Planning: Dimensions that Allow Sets
T8PL01SF                          FI Planning: Special Handling of Dimensions
T8PL01SV                          FI-Planning: Comb. fixed values/attr. for key fig. and dim.
T8PL02                              FI-Planning: User attributes
T8PL02CC                          FI Planning: Currency Translation
T8PL03                               FI Planning: Configuration of Plan Tasks
T8PLUATTR                        FI-Planning: Key Figures for Planning
Edited by: Bala Krishna on Sep 12, 2008 12:25 AM

Error in MCH1 table update for batch create with class assignment

Hi Experts,
I am looking for a BAPI which could help me to assign a class and in respectively assigns characteristics to th batch.
and hence i cant update MCH1 table for the same.
so please suggest me how could i achieve the same.
Thank you in advance.
Regards,
Ashish

Hello,
You can use the BAPI BAPI_OBJCL_CHANGE.
Regards,
Alok Tiwari

Need table name for currency of material

Hi,
Could anyone tell that the currency type that is displayed in MM02 accounting1 is taken from which table?
Regards,
Ezhil

Hi,,
look the below tables for Price..
MDIP-Material ,MRP Profiles
MKOP-Consigment Price Segment
MLAN-Tax calculation for Material
WLK2- Material Master Data R/3 Retail / Part POS Control Data
Regards,
Prabhudas

VBFA Table Update for Credit Note

Hi ,
I have created a rebate credit memo advice and a credit memo billing docment for final settlement. Now the document category that is displayed in VBAK and VBRK document respectively indicate that the documents created are credit memo documents but when i check in the document flow in Table VBFA, i observed that the document category indicated against the credit note order and Billing document is P and L respectively which is the document category for Debit Memo. Need to know how this document category changed in VBFA from Credit memo to debit memo category.Further need to know how the document category in VBFA table is updated.
To provide more inputs,when i create a normal credit note advice to billing process,VBFA takes the document category of credit memo.
Regards,
VEE KAY

HI,
this is not possible.
Tips:
1. Create a reserve invoice with negative amount with items copying the original invoice rows inside with custom code. (this will not thouch the stock).
or
2. Create a non inventory managed item (service type) - code: DE (Discount/Exemptions)
then you can use it:
2.1. Create the credit memo
2.2. Copy lines via custom code, but the itemcode will be always your itemcode, and every other can be copied from Invoice.
each cases there will no connection between your Original Invoice and Created Credit Memo/Reserve Invoice. You should have to use custom code to copy lines from original items.
In payment you can use the numatcard field for matching the documents together (numatcard: Vendor/Customer reference number)
Regards,
J:

Need table name for currency of material - Accounting veiw 1

Hi,
Could anyone tell that the currency field that is displayed in MM02 Accounting 1 is taken from which table?
Regards,
Sankaran

Hi,
thanks
Regards,
Sankaran
Edited by: Sankaran M on Jul 1, 2009 3:53 PM

Automatic table updation for every 10hrs

dear friends,
once in a 10 hour my table should be truncated.so please guid me to choose which is a suitable package and functions

If you4re using UNIX or LINUX, try to start the cron command. In this, start a procedure that truncates your table . Hope it helps you.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
dear friends,
once in a 10 hour my table should be truncated.so please guid me to choose which is a suitable package and functions<HR></BLOCKQUOTE>
null

Is there a howto for programmatically adding users and groups

Hi. I'm using WLS 7.0 SP2, and I'm trying to find docs/howtos to
programmatically add users and add them to groups. But unfortunately I must
be looking in the wrong places, cause I can't seem to find any straight
forward code. I've found some in a book called "J2EE Applications and BEA
Weblogic Server" (the white book with the race car on the front) but that
code is deprecated and for wls 6.1. I would like to find something as
straight forward as they have in their security section.
Can anyone help? Thank you in advance.

"Flip" <!no_spam![email protected]> wrote in message
news:[email protected]..
Hi. I'm using WLS 7.0 SP2, and I'm trying to find docs/howtos to
programmatically add users and add them to groups. But unfortunately Imust
be looking in the wrong places, cause I can't seem to find any straight
forward code. I've found some in a book called "J2EE Applications and BEA
Weblogic Server" (the white book with the race car on the front) but that
code is deprecated and for wls 6.1. I would like to find something as
straight forward as they have in their security section.
Can anyone help? Thank you in advance.
See the UserEditor and GroupEditor MBeans documentation. There have also
been some
posts in this news group with example code.
http://e-docs.bea.com/wls/docs81/javadocs/weblogic/management/security/authe
ntication/UserEditorMBean.html
>

Table Update using Nolog/Hint

Hi all
Although we can insert records using /nolog so that they are not added into archive logs.
We required using this for table update for some large routene updates which in any way does not effect the integrity of the database.
This table updation facility using /nolog was not available in earlier versions.
Alternate solution for temporarily turning the database into Noarchivelog ->Fire update statement ->Turn database into archivelog mode is not acceptable as the database is production database where certain users are always on with their routene small entry/updation jobs.
I want to know whether this has been enhanced in Oracle 10g or is there any work around by way of giving some hints at the update statement. As large table updation generating too much archive logs are not really desired in certain cases.
Suresh Bansal

Mr. Sayed
Thanks for reply. Insert idea is given just for the available workaround when required and to link this to the subject of discussion. Idea is when Oracle has provided some workaround for Inserting records without loging , why they have not provide so for update.
Pl. advise some workaround for the large update problem.
In Oracle 10g, the default is 'database force logging'. Hence, even nologging transaction, oracle will force to create logging.I would request you to elaborate this. We installed Oracle 10g at one site and the database runs in Noarchive log which is default installation in Windows 2003 server. I could not understand what you mean by default 'database force logging'
Suresh Bansal

Joint Venture Accounting documents

Hi Experts,
I need Joint Venture Accounting documents for a fresh implimentation.
Any help will be well rewarded..
Please send the documents to my id which is visible in my profile
Pratiksha

Hi,
A joint venture (JV) is an association of two or more parties formed to diversify risks, achieve operational efficiencies, and share in costs and revenues. Sharing is proportional according to each partyu2019s interest in the venture. Each cost object that is used to post joint venture accounting expenses must be assigned to a single joint venture.
Please find attached link:
http://help.sap.com/saphelp_oil472/helpdata/en/f1/9d2c3adcc8431be10000000a114084/frameset.htm
Ashok

RAISING AN EVENT WHEN DATABASE TABLE UPDATES

hi all,
i want to raise an event when database table updates.For eg : if a price of a material has been changed then i have to raise an event and run the abap program in back ground.i know transaction SM62 to create event, i dont know about transaction SM64. please give me the procedure how to solve this problem. i dont know work flow. please give me a sample code how to raise event.
thanka and regards
suresh

Hi Suresh
It is important to understand that the SAP architecture abstracts the database from the application.
I think that you should look for ways that the application triggers an event when an update has taken place, rather than the DB.
Two ways of doing this that spring to mind are change pointers (for the ALE interface, see menu SALE) and Business Transaction Events (various things including CRM integration, see menu FIBF).
The latter works very well for sending prices to CRM when they change. I am more familiar with this than ALE so I will discuss it.
If you go to menu FIBF and then follow menu path Environment -> Info System (P/S), and then run the report for event 00503301, you can find documentation and a sample function module that you can copy.
Once you register your new function module in the event tables then it will be called when prices are changed.
Cheers
Dom

Joint Venture : tables updation for currency added to equity group

Similar Messages

Maybe you are looking for