JOLT / JET Data Limit

Hi
I use WLE 5.1, Tuxedo 6.5 and Jolt 1.2. I call in Java with JET (a part of JOLT)
a Tuxedo Remote Service. In the log i see the following:
Allocate IN View:
151010.wceh00ct!JavaServer.6404: TRACE:at: { tpalloc("VIEW32", "EkonStatIN",
396)
-> OK
Allocate the OUT View:
151010.wceh00ct!JavaServer.6404: TRACE:at: { tpalloc("VIEW32", "EkonStatOUT",
4096)
151010.wceh00ct!JavaServer.6404: GP_CAT:1058: ERROR: Insufficient space allocated
for VIEW32 EkonStatOUT
-> Error!
We found JET allways allocate the OUT view with size 4096! But in this case our
view is more than 20k. The IN view is correct allocated with the real size (396).
Knows somebody a solutions for this case or is it a fault of JET?
regards
simon

"advaita" <[email protected]> wrote in message
news:3b7a73dc$[email protected]..
>
Does JOLT 1.2 have a limitation of the data / message size in a session /transaction
? Is there any limit such as 64K or 256K of only can be streamed to tuxedo?
I don't think it's a "hard" limit, but we've found that going over a rather
small amount
does cause timeouts which appear to be time spent marshalling the data in
the
jolt server.
Mike

Similar Messages

  • Is it possible to set a daily data limit on a Linksys Router?

    Okay, let me give a bit of back-story.
    Recently me and those living with me moved out to a rather remote little house in the wilderness. As such our internet options are limited. Our only options were DSL that was "only slightly faster than dial-up" (that's exactly what we were told) or satellite (let's not even consider dial-up).
    After a few months of deciding we finally picked the best bad apple out of the bucket of rotting apples and got hughesnet. Of course we are forced into a one year contract and all that business.
    Alright, let's not waste anymore time and get to the meat of my post.
    So we have a total data limit. (up to 500 mb) but a few of my roommates either forget to check their data use or don't care enough to keep track. As a result I get on the computer only to find the data limit at either a really low percentage of the total or completely used. And recently Hughesnet has been throttling us hard when the limit has been met. So much so as that we can't even browse but one web page at a time. Assuming only one person is using internet.
    So now you know the problem, and here's what I'd like to know:
    Is there any FREE way to cap internet usage per IP or connection to the router (they are really paranoid and some of them won't even let me on to find their MAC address) to, say, 100 mb used total in a day, and then completely cutting them off from the internet until the next day? (our data limit gets refreshed every day) I don't care if it's third-party software or not. I have talked to them about it many times and they all agree to only using a certain amount and then use over that amount anyway.
    There is also a time during the night that internet usage is no longer capped and you get free internet until it ends. So I would also need to know how to unlock this cap at a specified time and then have the cap resume once more afterward.
    (if this is not possible, don't worry, I can do it manually as I tend to be on the computer during this time. It would just be nice to have it done automatically.)
    Finally, if this is possible and ONLY as a bonus, is there any way to allow them BACK onto the internet after the full 500 mbs have been used (or so) so that they can at least enjoy what little internet is left after that point? This would be awesome to have but not at all necessary.
    So, any ideas?
    Solved!
    Go to Solution.

    You could connect a bunch of 3700s to each computer and do this . 
    Or...since you're the one who monitors the monthly limit, you could restrict an individual's internet access once you see that you guys are coming too close to the cap. 
    I don't work for Cisco. I'm just here to help.

  • What is the Data limit we can transfer from an iview

    Hi All
         What is maximum data transfer from an iview ?
         Is there any specific setting we need to do ? Can we increase the Data limit?
    Thanx in advance
    Prasad K

    Hi
        Clearly ...If i create an iview for SAP R/3 system ...so howmuch data i can 
        transfer to R/3 from portal.
        I hope some one can help me on this
    Advance thanx and points
    Prasad K

  • Error in Oracle Apex 4.2:GET_STMT error. ORA-56720: I/O data limit exceeded

    Dear Experts
    I have a workspace on apex.oracle.com
    I tried to copy an application. It gives me
    GET_STMT error. ORA-56720: I/O data limit exceeded - call aborted:281:0
    ORA-56720: I/O data limit exceeded - call aborted
    How to solve this?
    Best Regards
    Mahmoud

    mahmoudrabie wrote:
    Dear fac586
    I found the solution in the following steps
    1) Export (Backup) your report queries and report layouts
    2) Delete them from the shared components
    3) Copy the application
    4) Import them again to both applicationsThis may provide a workaround in your immediate situation, but the error message is indicative of an underlying problem in APEX 4.2 (as described in Joel's post). Please edit the Subject line of your original post to include "APEX 4.2" to help to bring this to Oracle's attention.

  • SAP LSO:  What is the suspend data limit on the LSO Repository out of the box?

    What is the suspend data limit on the LSO Repository out of the box?  What is this value set to by default in the SAP LSO?
    Thanks in advance!

    This laptop is equipped with SATA I, which is 150Gbit/s. You wont reach the maximum speed of your SSD but it will be much faster then your current old school spinner drive. An SSD will always outperform a normal HDD. Plus you should see a bump in battery life as well.
    Hope this helps!
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Data limit

    is there a data limit to upload a file?
    i've tried like 10 times with the same file and nothing

    Add FamilyBase.

  • Jet Data Base and MDAC

    I'm being told I need to repair my "Jet Data Base" and "MDAC", I think it has to with components in the OS, but I could be wrong. I'm pretty sure it doesn't have anything to do with fighter planes. I'm fairly new at
    this, I'm sure it shows. But I want to learn. It's hard to tear myself away from the screen. When I do it's usually to buy upgrades for my "rig". My question is, where do I go for definitions and more importantly, where do I find repairs for things
    I didn't know where broken? If my "rig" crashes I'm afraid I might have to get a life. So if someone can point me in the right direction I'll be glad to take it from there. Am I at the right place?
    Thanks
       

    See if the following helps:
    http://support.microsoft.com/kb/239114
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • Passing the data limit on the iphone 4 warning?

    is there an app that alerts you when you are close to passing your monthly data limit?

    Quoted from AT&T:
    AT&T outlines several different ways to achieve this:
    * Customer Text Notifications On Data Usage. When customers begin to approach their monthly usage limit, AT&T will send three text notifications – after they reach 65 percent, 90 percent and 100 percent of the threshold. Customers will also be sent emails if AT&T has their email address.
    * Data Usage Monitoring. Additionally, customers with iPhones and other select devices can use the free AT&T myWireless application to check data usage. The application is available for download in several smartphone app stores. Also, AT&T customers can call *DATA# from their wireless phone to check their data usage for the current billing period. They receive a free text message with their usage information. Customers can also go online to www.att.com/wireless to see all of their usage information, past and present.
    * Data Calculator. The easy-to-use online data calculator enables customers to estimate their mobile data usage and get a better sense for which data plan is right for them. It’s located at www.att.com/datacalculator.

  • Date limit reached

    i m getting this messgae i have reached my data limit. and a choice to either ok or re-enable.  when i tried to re-enable nothing but i keep getting the message. any idea what to do.

    Allot of Folks have run into the Issue that your experiencing on you Razr. If you know were the Data Settings are!  you can Adjust the Level high enough to were it Never runs in to this Problem.
    On mine i have my Dates Set to were they Follow my Bill cycle Dates witch is the 26 of every Month when it get's to the Date my Data even though i'm on a Unlimited plan resets to Zero. It will do the Same on the Phone it Will Reset to Zero the Morning of the 27th..
    Have at this You Tube Video it should Shed some Light on the Data Manager
    http://www.youtube.com/watch?v=UvP-Ac-YvzU&playnext=1&list=PLE9715F5B04ACDB6E&feature=results_main

  • Got 'bea.jolt.ServiceException: Data conversion failed; check log file'

    Got CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Data conversion failed; check log file
    when started PIA and login screen appeared.

    What version of PeopleTools are you using?  Have you looked at E-AS: Error "Cannot find or open field table. Maybe FIELDTBLS32 is not set properly" (Doc ID 660607.1) yet?

  • HT1689 How do I disable the 50mb data limit on 3g?

    I have paid for an unlimited data plan and can not use it. Every time I try to download something I get a message saying item over 50mb conect to wifi or pc.
    If I had known about this I would never have bought an iphone, is there some way to disable this, or will I throw this usless phone away and get an Android.

    I don't buy that...and don't understand the cap...  same carrier with Android device and same plan doesn't have a data transfer limit.  One of the many reasons I'm looking forward to dumping this thing once my contract is up.  Apple requires a lot more functionality before they will win my business back.  Small examples...memory card, bluetooth file transfers (to non-IOS devices), no download cap, competive answer to 'swype' typing, and file management system to save and transfer files other than movies and pictures.

  • HT201299 Can you set a cellular data limit on one specific phone

        My phone always seems to make my family's cell plan go over. I have figured out many ways to help not use so much data. My brother has an HTC One M8 and he can set a limit that his phone will not let him go over. I really want that because I dont want to be blamed for it.

    Not that I'm aware of.  I would check with your cellular provider and see what cellular limiting options they offer.

  • Jet OLEDB 'LIMIT' clause

    Hi Folks,
    I'm monitoring an access database for new records using LV2009 + the Database connectivity toolset(not 8.5.1 as in sig). Anyway the number of rows could be on the order of 200,000+, so I want to limit my query to only one record, the last. Unable to get the LIMIT clause to function, I searched and came across this: http://office.microsoft.com/en-us/access/HP010322501033.aspx. It states:
    Microsoft Jet SQL does not support the following ANSI SQL features:
    DISTINCT aggregate function references. For example, Microsoft Jet SQL does not allow SUM(DISTINCT columnname).
    The LIMIT TO nn ROWS clause used to limit the number of rows returned by a query. You can use only the WHERE Clause to limit the scope of a query.
    Is this the problem I'm going up against? The reason I use Jet is because I can more easily programatically load individual databases (and not have to mess around with UDL files).
    Any thoughts on a work-around?
    Happy Wiring,
    Jamie
    v2009 devel. w/RT
    Attachments:
    DB-test.zip ‏27 KB

    Potential workaround: may not be the most efficient solution though (my only exp. w/database access is from PHP/mySQL many years back!). Comments welcome. :-)
    v2009 devel. w/RT
    Attachments:
    DB-access-TEST_v2.vi ‏25 KB

  • Large data transfers in early morning hours putting me over my data limit

    I am getting large data transfers labeled Intranet Media Net from two different Iphones in my home.   These transfers occur typically in the early morning hours when we are sleeping and when we should be connected to Wifi.  ATT suggested that I turn off the option to send updates to Apple, which I did.  However, the charges are still occuring.  Last night a 35MB transfer has nearly put my daughter's phone over her 200 MB limit.  ATT suggested that I turn off cellular data to eliminate these from occuring, but that seems silly.  Plus, who is to say that they won't occur when I turn cellular on, in order to use data when I am outside of a Wifi area?  Any help would be much appreciated.  I don't know if this is an Apple issue or an ATT issue.

    How do you get logs out of a TC anyway?
    From the latest one you cannot.. no logs at all so that is the direction Apple is moving.. the black box.. well white box that you feed this into and get that out of.. but all the works inside are complete mystery.. that is the end point.. not quite there yet.
    Logs from v5 utility or SNMP.. both still working on any of the earlier TC.
    You can install v5 on Mountain Lion.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
    Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.
    Give 7.6.3 firmware the heave ho.. and use 7.6.1 and if the TC is more than 18months old.. round about .. even a Gen4 you can go back to 7.5.2.. which seems more solid again.
    As stated above.. by the time you get early Gen3.. they can have board faults. and earlier ones are especially not reliable with power supply faults.

  • So really how much is my Option 1 data limit of 10...

    Greetings Gurus,
    Here is my conundrum. I try to monitor my usage and use the broadband monitor on the ' my BT page' pasting the figures into a spreasheet.   So far so good, all I need to clarify is just how much is my daily allowance?
    Say for the month of November withits 30 days, Is the daily allowance 1/30th of exactly 10 Gigabytes (or 10,000 Megabytes) or is it 1/30 of what some in the data community regard as 10 Gigabytes which is 10,737.42 megabytes.
    It makes quite a difference  and you never know it might save me £5 if i creep over my monthly limit. Over to the experts - all opinions welcome or even a definitive answer from BT.
    TTFN

    Cannot fault the maths here my Amigos, thanks for the rapid response and so good to see that standards of numeracy are being maintained
    I got the same answer on my Sinclair Scientific
    Gonna keep an eye on the utilisation and amend my spreadsheet to be exactly 10Gigabytes/10000 Megabytes instead of my more optimistic figure.
    Any other views welcome on when is a Gigabyte not a Gigabyte

Maybe you are looking for

  • Unable to run a .class file w/ javaw

    I created a simple application which uses swing gui. This application works just fine when I click the "run" button in eclipse. But as soon as i copy the .class file from the eclipse project folder to somewhere else and try to run it with "javaw mycl

  • Tables in dropdowns cut off when printing

    In a RoboHelp (X5) HTML project, one of our topics has some fairly long tables in dropdowns. When we print these topics (either from the preview or from the compiled CHM), any table in a dropdown that crosses a page break is invisible until the point

  • How can I customize button's function in N73

    Hi Can any one help me on this? I need to customise the functioning of my N73 buttons. Currently left button has 'Messaging' and right button has 'Home' functions assigned to it. I mistakely press right button some time which takes me Orange home pag

  • Material master without valuation class

    Hi, Is it possible to have material master (of different material types) without valuation class? Also, is it possible to have only one GL account getting reflected for all these materials when we do posting (at the time of Goods receipt) irrespectiv

  • Updating In Elements 9

    I have been able to update Elements 9 since installing it, and even re-installing it. When I click on Update, the updater box searches for updates and then says it cannot connect to the update server. This has been going on for weeks.  I have checked