Jpanel is moving, not fix

Hi there, i am making a swing appl. and there is a jpanel on my window. On jpanel there is a jlabel. When i run application my panel is movind 2-3 mm to the right side. While application is working a few minutes later the jpanel is turning back the its original place. Because of panel is moving other components at the right of panel is moving as panel. I unchecked all resizables but didnt work.
I coundt find why it is happining? can anyone have idea?
Thanks all.

Your problem IS the NetBeans visual designer, which generates code you can't understand (most of which I don't understand [or even try to understand] either). Learn layouts and do the job correctly.
I have lots of things have to do parallel at same time. 10 days i am in trouble with this.
Teacher: Why are you late for school?
Student: Please sir, I started late from home.
Teacher: So why didn't you start early?
Student: Please sir, it was too late to start early.
Already i handled my problem.No, you just deferred it to the next time. When you'll be back here with the same unsmart questions about something you simply neglected to learn the right way.
I wish you luck in life. You'll need it.
db

Similar Messages

  • I am a new user and my Iphone sound stopped. The Verizon store could not fix it so a new Iphone has arrived.  What do I do to keep all the apps I have on the phone? Can I transition them somehow to my new Iphone or do I start all over?

    I am a new Iphone user so I am going to sound very dumb. The sound in my phone stopped working for some unknown reason about a month in. Verizon could not fix so a new phone was sent. I sit here with my current soundless Iphone and the new one. The guy at Verizon moved my contacts over but what can I do to get all the apps I downloaded to be on my new Iphone before I send the current one back? He said something about downloading something on the my PC (not a mac) and then restoring from the PC to the new phone.  Where do I start getting the stuff downloaded from my current soundless phone to the PC?

    iTunes: About iOS backups - Support - Apple

  • Verizon ellipsys update did not fix the app memory problem!

    The Verizon update for the ellipsys did not fix the original issue with the storage of apps on the device. The update gave you the capability to move apps to your tablet space; but, the device's pre installed apps cannot be moved. Those apps take up roughly 500mb of the allotted 1gb of space.
    This tablet was meant for my parents to use and they can't be sitting here umistalling and disabling preinstalled apps just to use there tablet.
    Please include in the next update a reallocation of memory for more app storage space. I have already moved all available apps over to the tablet space: I have 4 gigs open on their tablet and only 200mb for apps? Crazy sauce...

    I called Verizon 2nd level tech support and they assured me there is NO ED06 update's said they haven't even finished rolling out ED05 yet. I think they just told you that to get you off the phone. I also have a Fascinate and have had problems and can't get them to replace my phone with a different device. I want the Droid Charge since it is the only other one that has the AMOLED screen that I originally chose the Fascinate for . They had a program that ended on July 28th the day that ED05 rolled out. They offered the Droidx, the Incredible 2, and the Droid Charge to replace the Fascinates that were having trouble. I had called to report my issues during this replacement program but was not told that it was going on and now they won't give me the Droid Charge because it has expired. I think since there are STILL issues-they need to bring this program back and allow us to get a different phone. I have been a customer of Verizon for 10 years and have 7 lines so I am REALLY disappointed that they can't work with me (or other customers ) especially since it is not something we did to the phone. It is a problem with either Verizon or Samsung. I don't know where to go from here but maybe if they hear enough from others that didn't have any success with ED05 they will start to replace them. I will probably go to a higher level to voice my concern. Let me know if anyone has any success getting a new device especially the Droid Charge.

  • 3.1EA2 bug still not fixed - Members of package body not listed in the tree

    Hi, I was working today with SQL Developer again and found that this bug is still not fixed even when it was reported more than 1 year ago!!!
    I did a quick search and found it here
    Package Body Tree not always showing
    The problem is when you expand the package specification or package body tree, not all members of the specification/body are listed. This is mostly observable in the package body, but it regards to the specification as well.
    Consider this case:
    CREATE TABLE EMP (
        ID               NUMBER(6,0) DEFAULT 0,
        NAME             VARCHAR2(20 BYTE) DEFAULT NULL,
        DEPT             VARCHAR2(20 BYTE) DEFAULT NULL,
        FUNCTION         VARCHAR2(20 BYTE),
        PROCEDURE        VARCHAR2(20 BYTE));
    CREATE TABLE LOOP (
      AREA    VARCHAR2(5),
      VALUE   VARCHAR2(2));
    CREATE OR REPLACE PACKAGE Test_Package1 AS
    gvc_const CONSTANT VARCHAR2(10) := 'xxx';
    PROCEDURE Test(p_RC OUT NUMBER,
                   p_ID IN NUMBER);
    END Test_Package1;
    CREATE OR REPLACE PACKAGE BODY Test_Package1 AS
    PROCEDURE Test(p_RC OUT NUMBER,
                   p_ID IN NUMBER)
    IS
    BEGIN
      --INSERT INTO EMP (ID, NAME, DEPT, PROCEDURE) VALUES (1, 'Tina', 'xxx', 'xxx');
      --INSERT INTO EMP (ID, NAME, DEPT, FUNCTION) VALUES (2, 'Jeff', 'xxx', 'xxx');
      --INSERT INTO LOOP(AREA, VALUE) VALUES('a','b');
      NULL;
    END;
    END Test_Package1;Compile the package specification and the body. Expand the spec + body in the tree. Uncomment any of the commented lines in the package body and compile the body again. Now expand the package body again and look what is displayed.
    Why? It is because SQL Developer handles words "Function", "Procedure" and "Loop" as keywords and according to them does the parsing.
    Another case
    CREATE OR REPLACE PACKAGE Test_Package1 AS
    gvc_const CONSTANT VARCHAR2(10) := 'xxx';
    TYPE Loop_rec IS RECORD(
      item1   LOOP.AREA%TYPE);
    PROCEDURE Test(p_RC OUT NUMBER,
                   p_ID IN NUMBER);
    END Test_Package1;Compile just this specification and try to expand it in the tree. Again, during parsing the package, SQL Developer takes the word "LOOP" into consideration and fails to parse the specification.
    There is exactly the same problem when you declare functions from external dll libraries in package body. Since there is no "END;" in this case, SQL Developer's parser fails...
    To me it seems you simply blindly took some keywords like "FUNCTION" and expect there will be some "END;" keyword corresponding with it.
    Can anyone have a look at this and finally fix it?

    Hi,
    Thanks for trying out SQL Developer 3.1 EA2 and providing a clear, reproducible test case for this issue. I logged an internal bug for it:
    Bug 13438696 - 3.1EA2: FORUM: CERTAIN KEYWORDS IN PKG BODY BLOCK MEMBERS FROM CONN VIEW TREE
    It seems the bug noted in the other forum thread you reference has been fixed, but really had nothing to do with problems discussed either here or there. That fix involved adding an Edit Body... item to the Package context menu in the Schema Browser, not displaying Package members correctly in the Connection view tree.
    Regards,
    Gary
    SQL Developer Team

  • Just got new air and trying to set up. When I put in my Apple ID and password it comes up with error message 'can't sign in because of server error. Try again signing on.' Trying again does not fix. I know my ID and PW are right as work on other devices.

    Just got new air and trying to set up. When I put in my Apple ID and password it comes up with error message 'can't sign in because of server error. Try again signing on.' Trying again does not fix. I know my ID and PW are right as work on other apple devices I have.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • IPad Safari Landscape innerHeight/outerHeight bug still not fixed in iOS 7.1.1

    iPad Safari Landscape innerHeight/outerHeight bug still not fixed in iOS 7.1.1
    No bug in Chrome or other third party browsers.
    When are Apple going to fix this bug? It's painful.
    more info here:
    http://stackoverflow.com/questions/19012135/ios-7-ipad-safari-landscape-innerhei ght-outerheight-layout-issue

    Tell Apple not other users.
    Use http://www.apple.com/feedback/ipad.html

  • ACR 7.1 RC Issue Not Fixed in ACR 7.1

    The issue I identified in ACR 7.1RC is not fixed in the production release of ACR 7.1.  Maybe I did not explain this in enough detail, it's very easy to miss. 
    1. Select a RAW file that was previously adjusted using PV2010.  When you open the file with ACR 7.1 it will open with PV2010 since the xmp file was saved with that process version. 
    2. Click on the "!" next to the image and it changes to PV2012 with suggested slider settings.  Adjust one of the sliders in the Basic Panel - this is very important becasue if you don't adjust a slider the issue does not show up. 
    3.  With the Basic Panel still selected, click on the three dashes to the right of the Basic Panel to get the pop down menu and select "Image Settings".  The image changes back to PV2010 with settings that are saved in the XMP file.  Now click on the three dashed again to get the pop down menu and "Custom Settings" is checked, but the image is displaying PV2010, not PV2012 like it should if "Custom Settings" is checked.  You just lost your PV2012 settings. ACR 7.0 does not have this issue. 
    4. If in #3 above you select another panel before you click "Image Setting"  the first time you can switch between PV2010 and PV2012 by clicking "Image Settings" for PV2010 and "Custom Settings" for PV2012.   After you do this first in a panel other than the Basic Panel for the first time you can then do it in the Basic Panel without the problem occuring. 
    I discovered this while converting images that were adjusted using PV2010 to PV2012 and like to compare the two Process Versions.  I did not have any problems with ACR 7.0, but when I installed ACR 7.1RC the issue occured.  I was hoping it would be resolved in the Production Release of ACR 7.1, but it's still there. 
    I am using Photoshop CS6 on a Windows 7 Professional 64 bit computer, don't know if this same issue exists in Lightroom. 

    None of the issues reported on this forum have been fixed in Camera Raw 7.1, near as I can see.
    The Camera Raw 7.1 software was built on May 15, but Adobe appears to ignore beta feedback unless it's a real show-stopper.  I can only imagine the definition of "show-stopper" must include users' systems actually catching fire or something.
    Camera Raw 7.1 puts columnar color artifacts like this into images, for example:
    Compare the above to the same conversion done with Camera Raw 7.0:
    Plus Adobe has removed several color-fringing reduction features without providing suitable substitutes.
    I recommend eveyone avoid upgrading to this release.
    -Noel

  • Windows Update Error Code 80072F8F! I Did All The Steps And Will Not Fix Please HELP?

    No one seems they can not help me fix this error code I did many things and not one person has really
    helped me, I have a question at another forum but all they do is just ask me questions tell me steps to fix this but nothing worked at all, This happened on 8/30/2014 and ever since no one can help me fix this at all....I have no money to pay for the fix...I
    am on very very low limited disability income, No credit cards nothing. I need help now I paid a lot of money for my Windows 7 Ultimate and now since 8/30/2014 I got that error code no one has helped me....PLEASE help me please....And I am not sure where to
    go for help here thank you. I have done many things but nothing is fixing this issue. please help...And yes I did the clock and clock keeps perfect time, doing that clock did not fix this error code at all...

    Hi Angelsims,
    First I also want to get more information from you to help us to troubleshhot:
    1.Did this error occur on a single update or multiple updates? please also post the update name in issue.
    2.Please also post the steps you have followed to fix this issue.
    In addition, please try to use the general steps to troubleshoot the windows update issue, and refer to the steps below:
    The following outlines how to stop services pertaining to Windows Update, rename system folders, register related DLL files, and then restart the previously mentioned services. This troubleshooting generally applies to all Windows Update related issues.
     Stopping services pertaining to Windows Update
    1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
    2.     If you receive a notification from User Account Control simply click Continue.
    3.     At the command prompt, type the following, commands and then press ENTER after each command.
            net stop wuauserv
            net stop bits
            net stop cryptsvc
     Please do not close the Command Prompt window.
     Renaming folders pertaining to Windows Update
    1.     At the command prompt, type the following commands, and then press Enter after each command:
    2.     ren %systemroot%\System32\Catroot2 Catroot2.old
    3.     ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
    4.     Please do not close the Command Prompt window.
     Registering DLL’s pertaining to Windows Update
    1.     Please copy and paste the following text into a new Notepad document, and save the file as WindowsUpdate.BAT
    2.     If saved correctly the icon will change from a Notepad file to BAT file which has two blue cogs as its     icon.
                                           -or-
    3.     You can manually type each command at the command prompt:
             regsvr32 c:\windows\system32\vbscript.dll /s
             regsvr32 c:\windows\system32\mshtml.dll /s
             regsvr32 c:\windows\system32\msjava.dll /s
             regsvr32 c:\windows\system32\jscript.dll /s
             regsvr32 c:\windows\system32\msxml.dll /s
             regsvr32 c:\windows\system32\actxprxy.dll /s
             regsvr32 c:\windows\system32\shdocvw.dll /s
             regsvr32 wuapi.dll /s
             regsvr32 wuaueng1.dll /s
             regsvr32 wuaueng.dll /s
            regsvr32 wucltui.dll /s
             regsvr32 wups2.dll /s
             regsvr32 wups.dll /s
             regsvr32 wuweb.dll /s
             regsvr32 Softpub.dll /s
            regsvr32 Mssip32.dll /s
             regsvr32 Initpki.dll /s
             regsvr32 softpub.dll /s
             regsvr32 wintrust.dll /s
             regsvr32 initpki.dll /s
            regsvr32 dssenh.dll /s
            regsvr32 rsaenh.dll /s
             regsvr32 gpkcsp.dll /s
             regsvr32 sccbase.dll /s
             regsvr32 slbcsp.dll /s
             regsvr32 cryptdlg.dll /s
             regsvr32 Urlmon.dll /s
             regsvr32 Shdocvw.dll /s
             regsvr32 Msjava.dll /s
             regsvr32 Actxprxy.dll /s
             regsvr32 Oleaut32.dll /s
            regsvr32 Mshtml.dll /s
             regsvr32 msxml.dll /s
             regsvr32 msxml2.dll /s
             regsvr32 msxml3.dll /s
             regsvr32 Browseui.dll /s
             regsvr32 shell32.dll /s
             regsvr32 wuapi.dll /s
             regsvr32 wuaueng.dll /s
             regsvr32 wuaueng1.dll /s
             regsvr32 wucltui.dll /s
             regsvr32 wups.dll /s
             regsvr32 wuweb.dll /s
             regsvr32 jscript.dll /s
             regsvr32 atl.dll /s
             regsvr32 Mssip32.dll /s 
     Restarting services pertaining to Windows Update
    1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
    2.     If you receive a notification from User Account Control simply click Continue.
    3.     At the command prompt, type the following, commands and then
    press ENTER after each command.
            net start wuauserv
            net start bits
            net start cryptsvc
             exit
    Please try the steps above, if the step failed, please post the error or failure information.
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang       

  • I have an older version of Adobe Digital Editions (around 3 years old) and was very happy with it.  Then I had problems with my Kobo Reader and asked a friend who works in IT to assist. She could not fix the Kobo but she messed up my Addobe. She downloade

    I have an older version of Adobe Digital Editions (around 3 years old) and was very happy with it.
    Then I had problems with my Kobo Reader and asked a friend who works in IT to assist. She could not fix the Kobo but she messed up my Addobe. She downloaded version three and I have an account and a password - was not able to transfer my books from my reader to version three (and I don't like the lay-out - I would prefer to stay with the old version as I also loose all my download date info..)
    But all the books I have bought over the last three years are in the old Adobe Digital and I cannot access them any more. When I use it I get the message "that the document is licensed to a different account. I can't even open the books on my computer.
    When I go to my Kobo library, I cannot also not open my books and get the message "this doc is protected by adobe digital rights management and is not currently authorized for use with your adobe. please sign in with your authorized adobe id and try again"
    I believe the problem is that I do not seem to have a digital id for my old adobe or that the Kobo is not in sync with it anymore.
    can you please help me - going on vacation in three days and cannot go without books.

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

    I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

    I have been experiencing the same problem. My mail app won't even open on my Late 2011 Macbook Pro. It will show as open, but the app will never actually show up.

  • MY APPLE ID EMAIL ACCOUNT WAS STOLEN BY SOMEONE, AND I NOW I CAN NOT FIX THAT. SO I OPEN A NEW GAMIL HOW CAN I CHANGE MY APPLE ID INTO A NEW EMAIL ADRESS? THANKS.

    MY APPLE ID EMAIL ACCOUNT WAS STOLEN BY SOMEONE, AND I NOW I CAN NOT FIX THAT. SO I OPEN A NEW GAMIL HOW CAN I CHANGE MY APPLE ID INTO A NEW EMAIL ADRESS? THANKS.

    If you are going to change your AppleID login you will need to log out and back in on all your devices. Turn off 'Find My iPhone/iMac/iPod' first or you will find yourself unable to sign out and be stuck.

  • The save for the web function has stopped working in my copy of photoshop elements 12.  I get this message, " The operation could not be completed.  The system cannot find the path specified" Resetting preferences did not fix.

    The save for the web function has stopped working in my copy of photoshop elements 12.  I get this message, “ The operation could not be completed.  The system cannot find the path specified” Resetting preferences did not fix.

    my os is windows 7.  elements 12 worked fine for many months then save for the web stopped working

  • Billed for Premium Tech Support That Did Not Fix the Problem

    i too was scammed last night by a premiun tech support rep...he assured me that the problem i was having with my pc
    could be repaired and pursuaded   me to purchase the 10 month plan for $14.00 month also said if i canceled prior to the 10 mos i would be charged a $59.99 fee.......I told him I would sign up if he could assure me the pc problem would be resolved.
    He also assusred me that if  it could not be resolved  to ask to be transfered to the billing department to cancel the  the plan   I confirmed this with him at least 3 times and he assured me I would not have to  pay and I could cancel with no monetary obligation if the problem on my pc could not be resolved....well it was not  and my computer was left in worse condition than when the premium support tech began working on it...the support tech worked on my computer for 3 and 1/2 hoursI was on the phone with him until 3:30 am....he apologized and said he did not expect the outcome of what happened to my computer. well needless to say when i called billing i was told I was liable for the $59.00 early cancelation fee  it did not matter that the tech did not repair the problem or that he left my computer in worse condition than when he  began working on it.........so technically what they are saying is that I have to pay for them creating problems on my pc that did not exist before I called them   I  The sales rep I spoke to was "scott : he said he was in massachusetts..I spoke with Eric in BIlling and he said he would note on my account what I had told him and asked me to call after the charge appears on my phone bill to see if i could have it removed...i also called billing again today and spoke with another billing rep and she said she also would note my problem on my account and that hopefully the $59.00 fee would be removed..it is very disppointing to know that Verizon Hires people that lie to consumers.....all of their employee conversations to customers need to be recorded and monitored. I received a recorded message from verizon this am asking if i was satisfied with the service i received from tech suppoort with #1 being the least satisfed  which of course described my experience with them.  If My tele phone bill does not reflect the cancellation  of the $59.00charge I will definitly pursue this matter further....

    I was also billed on July 15, 2014 for tech support that did not fix my computer problem. 
    I was billed $99.99 to my credit card to a tech in the country of India.
    I tried to get my money back but the number I was referred to would not answer.
    I immediately went to my bank which took all of the info and changed my credit card number.
    The bank also did their own investigation and said it seemed to be a scam.  My money was redeposited into my account within 36 hours - not because of anything Verizon did, but my BANK!!   I was so grateful.
    Such service from Verizon's tech department is unethical and inexcusable.
    Verizon customers deserve better tech service than this.  "Ma Bell" would turn over in her grave if she knew how far down the service of the original phone company has gone. It's a disgrace!!  A SCAM perpetuated and sanctioned by Verizon.
    I complained to the Verizon Customer Correspondance Claim Dept.  Do you think they will straighten this mess out?  I doubt it - I am a retiree with an excellent payment record.
    They don't care.  This hurts the American economy.

  • No matter how many times I start itunes on my pc I have to agree to the terms of service gain and when it does open my settings have all been changed.  why is it doing this and how can I satop it?  reinstalling does not fix it.

    No matter how many times I start itunes on my pc I have to agree to the terms of service again and when it does open my settings have all been changed.  Why is it doing this and how can I stop it?  Reinstalling/repairing does not fix it.

    McAfee AntiVirus by any chance? See the thread Why does iTunes delete my itunesprefs.xml?
    Or it could be an issue with the SC Info folder. See TS1277 - iTunes: Missing folder or incorrect permissions may prevent authorization for details.
    Or a repair install of iTunes from the Programs and Features control panel might fix the problem.
    tt2

  • After the last update iTunes no longer works...  "This application failed to start because MSVCF80.dll was not found.  Re-installing the application may fix this problem"  I tried and it did not fix the problem?

    After the last update iTunes no longer works...  "This application failed to start because MSVCF80.dll was not found.  Re-installing the application may fix this problem"  I tried and it did not fix the problem?

    Click here and follow the instructions.
    (99061)

Maybe you are looking for

  • Clearing Values in Sctript

    i am issuing the output from VF31. there are some values(serial numbers) are there to display in the script .if first document have the five values and second have only one even it is dipslyin five.previous values are not clearing. even i am not call

  • ISE 1.2 - Error 12929 NAS sends RADIUS accounting update messages too frequently

    We are currently running Cisco ISE 1.2, and every day under the "Misconfigured Network Devices" section on the main ISE Page, I have a huge list of different devices that are all being flagged with the following error message: "12929 NAS sends RADIUS

  • PDF File Type Icon Not Displaying HELP!!!

    Hey guys! I have a quick question that I need resolved. Make sure you READ before you respond as people seem to be having trouble with this one. Something happened on my system to where .pdf files aren't displaying the PDF file type image anymore. Th

  • Getting an error that the iMessage cannot be initialized - why now, I have been using it for the last 3 years?

    I cannot send iMessages anymore (have been able to do so for the last 3 years) and when I go Settings / Messages / the iMessage is OFF so when I turn it on it returns an error saying that iMessage cannot be initialized and that I should sign on with

  • Constant HP printer crashing issues

    Currently if anyone in my dept at my University tries to print a page from the Apple store it immediately crashes our HP 8150 with a 79.01.fe error. I tried saving the page as a PDF, copying and pasting rich text into TextEdit, saving as PS, all stil


HashFlare