JPG fine in Photoshop but error in After Effects: "The file format module could not parse the file (45::36)"

I found a lot of discussion on this error in Photoshop but I'm getting it in After Effects. I have a sequence of JPG images created by photoshop (output is RGB in sRGB color space) and it appears one of them is causing problems in AE. There are several hundred images in the sequence, all created from PS, and only this one is causing problems. I've re-created it several times in PS and the error persists. I've also re-created several others and they're still fine.
I've seen other comments that the issue is with incorrect file formats and CMYK color space. I've confirmed that neither of those is my problem - the file is JPG straight out of PS in RGB. Also, there are several hundred others that are just fine using the same process and "save as" properties...
Any help?
Thanks,
rgames

Have you stripped its metadata in Bridge? Could well be that it contains botched info from the camera. PS carries this through until the bitter end. Alternatively save it with Save for Web choosing to remove metadata.
Mylenium

Similar Messages

Before one week i installed the facebook chat manager,its working fine still now,but if i chat in some other system(Pc),its not recording the chat history in my system

Before one week i installed the facebook chat manager,its working fine still now,but if i chat in some other system(Pc),its not recording the chat history in my system

How does that problem relate to Firefox support?

I have been using Adobe Photoshop since 1998. I recently replaced my computer and placed the Adobe Photoshop 5.0 CD in to install, and found that could not load the software, and referred me to Adobe. What should I do?

I have been using Adobe Photoshop since 1998. I recently replaced my computer and placed the Adobe Photoshop 5.0 CD in to install, and found that could not load the software, and referred me to Adobe. What should I do?

According to this forum post from the time of the shutdown, it is only those directly affected.
Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products
Here is a list from that link
If your software is affected by the activation server shut down then you will receive an error that the Activation server is unavailable. The specific affected products are as follows:
Acrobat 7.0 - Windows
After Effects 7.0
Audition 3.0
Captivate 1.0
Contribute 2.0
Contribute 3.0
Creative Suite 2.0
Director MX 2004
Dreamweaver MX 2004
Fireworks MX 2004
Flash Paper 2.0
Freehand MX
GoLive CS2
GoLive 9.0
Illustrator CS2
InCopy CS2
InDesign CS2
Macromedia Studo MX 2004
Photoshop CS
Photoshop CS2
Photoshop Elements 4.0
Photoshop Elements 5.0
Premiere Pro 7.0
Production Studio Premium

Error Message: Could not Parse the Request

Hello Experts,
I am getting the following error in one of my VC models on the portal when the portal is idle for some time.
Could not Parse the Request
I have a timer attached to this model and is set for 30mins.
Please let me know if anyone has any thoughts on this.
Thanks,

Shalom Guy,
I'm getting this kind of error "Could not parse request" after 30 min.
The design like this: I have in the VC model Timer which is fire my event (every 30 min) and executing
Data Service Web service -> ivies to -> HTML View.
Than we deployed VC model into the Portal (VC Model -> iView-> Page)
I am getting popup of the error as "Could not parse Request" and the model
is not getting refreshed after 30mins.
Please let me know if anyone has any thoughts on this.
Appreciate your help.
Thanks
Costa

Getting the error " [java] Problem invoking WLST - java.lang.RuntimeException: Could not find the OffLine WLST class " while building the O2A 2.1.0 PIP

Getting the error " [java] Problem invoking WLST - java.lang.RuntimeException: Could not find the OffLine WLST class " while building the O2A 2.1.0 PIP. I am using the Design Studio 4.3.2 for building the O2A 2.1.0 PIP. Please let me know how to resolve this issue. Here I am enclosing the log file .

We have basically the same issue when we try to create the interpreter using the embedded method..
I was able to use the interpreter embedded in a java client as long as the weblogic jars were located in a weblogic install if I tried to use them from a maven repository no luck at all...
All of this worked easily in 9.2 now in 10.3 it seems more error prone and less documented.
I have seen close to a 100 posts on issues related to this so is there a document which outlines specifics....
We / I have used weblogic now for almost 10 years and moving from 8.1 to 9.2 was painful and we expected the move from 9.2 to 10.3 not to be soo bad but its proving to be as painful if not more painful than moving to 9.2. We seem to spend a good bit of our time working around issues in the next new release that were not in the previous one..
Any help would be appreciated I think we will open a support case but even that is more painful...
Any help would be greatly appreciated..
PS: We confirmed that all jars in the startweblogic classpath were in the startup. The server we have the embedded wlst instance is a managed server and we are using the component in a war... Are there any restrictions which we are unaware of.
Error we get is
1 [ERROR] com.tfn.autex.order.weblogic.QueueMaintenanceUtility.addQueue():217 Error Adding Queue wowsers JNDI Name wowsers Exception: Invocation Target exception while getting the WLSTOffLineScript path

When I open Firefox the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution in the forum but only for Windows based

When I open the application the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution on the support site but only for Windows-based Firefox, and I'm a Mac user. I have plenty of room on my hard disk.
== This happened ==
Every time Firefox opened
== Two days ago, for no apparent reason.

In Mac OS X v10.7, the $HOME/Library folder is a hidden folder.
Open Finder and use one of these:
* Go > Go To Folder (Shift-Command-G) and in the dialog type: ~/Library
* Open the "Go" menu and hold down the Option key to make the Library appear
You can also use this command in a Terminal window to remove the hidden flag.
* Mac HD > Applications > Utilities > Terminal
* chflags nohidden ~/Library

Hello - my safari on my ipad2 gives the following message "safari could not open the page because the server stopped responding"...email works fine and I can download from the app store...seems to just be a safari issue

Hello - my safari on my ipad2 gives the following message "safari could not open the page because the server stopped responding"...email works fine and I can download from the app store...seems to just be a safari issue

Marc-
The Safari message is probably telling the truth. Is the problem repeatable at several websites, or is it only with a particular one? If all websites, you may have trouble with your internet connection downloading large amounts of data. Mail messages are relatively small unless there are attachments or embedded images.
Fred

HT201263 when i follow the steps it does it but when it gets to itunes it says 'iTunes could not contact the iPhone software update server because you are not connected to the internet' but i am connected to the internet ..?

when i follow the steps it does it but when it gets to itunes it says 'iTunes could not contact the iPhone software update server because you are not connected to the internet' but i am connected to the internet ..?

Were you definitely connected to the internet at the time? If you don't have iOS 5 on your iPhone then the only way to update it would be via iTunes, once updated to the latest version of iOS you'll be able to update your iPhone without connecting to iTunes "over-the-air".
Before updating however it goes without saying to Backup your iPhone, this should happen by default upon connecting your iPhone to iTunes.
Regards,
Steve

After Saving File get Message "Could not find the included template"

I have a strange issue going on and it's becoming very, very annoying. When I edit a file on our web server (it's a virtual machine running Windows Server 2008) and then try to view it in my browser, I get the error message "Could not find the included template". If I refresh the page (sometimes upwards of 40 times) my page with whatever changes I made will finally load. I checked with our system administrator and he's not aware of what could be causing this.
It happens on whatever the most recent file I was working on. If it's a ColdFusion file, I get the "Could not find the included template" error. If it's a change to my stylesheet, the styles will not load. Again, in both instances it takes hitting F5 upwards of 40 times until the page displays correctly.
Has anybody else ever encountered such an issue? It's happening on two separate virtual servers (both Win 2008), one has CF9 installed and the other CF10. It get's frustrating having to referesh before the page or stylesheet get picked up. Any help or suggestions are appreciated!
Thanks.
Brian

azuro28 wrote:
> I'm new to ColdFusion and after I edit a cfm
(template.cfm) file using vim, I
> got the following error:
> Could not find the included template template.cfm
>
> page.cfm contains:
> <cfinclude template="template.cfm">
>
That means that the file 'template.cfm' is not where
ColdFusion needs it
to be so that it can include it. Which is generally in the
same folder
at page.cfm with that syntax.

Dsconf error on ODSEE 11.1.1.7.1 : could not negociate the desired...

Hi,
We migrate a DSEE instance from 6.3.1 to 11.1.1.7.1 but now we encounter random errors with some scripts we used on the 6.3.1 instance
For instance when we try to disable a replication agreement :
     Unable to bind securely on "myHost:51389".
     "myHost:51389" and "dsconf" could not negotiate the desired level of security.
     Details: Received fatal alert: bad_record_mac
     The "disable-repl-agmt" operation failed on "myHost:51389".
Or when we list the replication agreements :
     Unable to bind securely on "localhost:51389".
     "localhost:51389" and "dsconf" could not negotiate the desired level of security.
     Details: Received fatal alert: bad_record_mac
     The "list-repl-agmts" operation failed on "localhost:51389".
Those scripts are launched in a once a day and they fail randomly.
Il we launch the command mannually we do not encounter the problem.
So the questions are :
     - why do we have those random errors? what is the root cause? (certificate problem?)
     - On the forum, I have found that we can use -e option or set the $DIRSERV_UNSECURED variable (see : https://community.oracle.com/thread/2282940?tstart=0)
          => Is it THE solution?
Regards,
Gilles

Hi.
This looks like a known issue that occurs on Solaris platform. See known DS bug in 14467092 in the release note:Directory Server Bugs Fixed and Known Problems - 11g Release 1 (11.1.1.7.0)
Regards,
Carole.

Can you still import a 3D photoshop file into After Effects to edit in 3D? (not getting the Live Photoshop 3D choice?)

trying to import a 3d photoshop file into ae, but it is not coming through as a 3D file despite the hundreds of videos that I have watched on it. I am not getting the live photoshop 3d tick box as an option on import...help!!!

No, these features have been removed since CS6.
Mylenium

Netflix Error - Unable to sign in. Sorry we could not reach the Netflix server.

I have been a big fan of the Apple TV 2 and have been using it since the day it came out. While I have had periodic challenges with Netflix, once I moved into our new house and completely reworked my home network, it was working flawlessly until right before the last update in December. I had been having zero problems with it when I started getting the above message. I read an update was on the way so I waited but even after the latest update I am still having the same problems and I don't get it.
I can sit in my living room and turn on my Macbook and watch Netflix just fine. I can turn on my Android phone while on the wireless in the house and watch Netflix just fine. I can turn on my samsung DVD player and watch Netflix just fine. I can even turn on my xBox and watch Netflix just fine. Everything in the Apple TV works and I can link with my iTunes no problem. I don't get this problem.
There have been other threads on this topic in these forums with no resolution and when I contact Apple, they say it's a Netflix issue and when I contact Netflix, they say it is an Apple issue.
Has anyone found a resolution to this?

In case you did not already see this.
http://www.tipb.com/2010/12/13/apple-tv-bugs-reach-netflix-service/
I am having the same problem.

"...file-format module cannot parse the file" Error

I am using PS CS3 Extended on a PC
I keep getting the error...file-format module cannot not parse the file" errors when attempting to open PNG or GIF files that were created using the same version of Photoshop.
I used to have to reboot the machine to get rid of this error - but that is no longer working.
The error is occuring more and more frequently.
I really need to edit these files.
Please tell me how to fix this.
I have seen this error in the forum - but was unable to find a real solution. Rebooting the machine is not really a solution.
Thanks
JD

Thanks for trying Chris but the files are not corrupted. They open sometimes in CS4, and always do in CS3 and Elements 6, as well as on another computer. I'm talking about all my PNG files. They work most of the time, just not all of the time. If I close down PS CS4 and open it again they open just fine for a while before the problem starts again.
I reset all preferences to factory defaults and uninstalled/ re-installed again this morning so now I'll see what happens.
Cheers
Maggie

Using trial of Photoshop CC but when trying 3D get "Could not apply the workspace because the disk is not available." can anyone help?

I am trying out Photoshop CC specifically the 3D facility but every time i go to 3D I get "Could not apply the workspace because the disk is not available"
I have searched online for answer but cannot resolve this, can anyone advise?
regards
Drew.

I am using a MacBook Air
Model Name: MacBook Air
Model Identifier: MacBookAir6,2
Processor Name: Intel Core i7
Processor Speed: 1.7 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 8 GB

Error in Fiori Launchpad "could not start the app due..."

Hello everyone,
I am having a previously unseen (well, at least for me) error which raises on a click on the tile "Track Purchase Orders" on the SAP Fiori Launchpad:
"Could not start the app due to an internal error" (see the screenshot attached)
I haven't found any help on this error on Google and SAP portals.
The other applications work fine. So did this one before the implementation of SAP_UI 740 SP09 (before that it was SAP_UI 740 SP08). We applied all the notes specified in this post http://scn.sap.com/docs/DOC-56967
Components needed for Track Purchase Orders are patched to their maximum levels (UIX01EAP 100 SP03 and SRA020 600 SP05). OData and UI5 services are activated.
Plus, this error doesn't appear in the Gateway error logs (transaction /iwfnd/error_log) so troubleshooting is difficult.
The issue is systematically reproducible and has been reproduced on several computers.
Thanks a lot if you have any insight about this issue!
Best regards,
Guillaume

Thank you for replying.
I have inspected the element and clicked on the tile. The network tab is below:
The status seems OK.
The response for ResolveLink:
{"d":{"results":[{"__metadata":{"id":"http://<server>:<port>/sap/opu/odata/UI2/INTEROP/NavTargets('PurchaseOrder-track~68')","uri":"<server>:<port>/sap/opu/odata/UI2/INTEROP/NavTargets('PurchaseOrder-track~68')","type":"INTEROP.NavTarget"},"id":"PurchaseOrder-track~68","shellType":"FLP","postParameters":"","text":"Track Purchase Order","applicationData":"SAPUI5.Component=ui.s2p.mm.purord.tracking","applicationAlias":"TrackPurchaseOrder","applicationType":"URL","url":"/sap/bc/ui5_ui5/sap/mm_purord_tpo"}]}}
I'm surprised that gbapp_poapproval and sra001 OData services are called here (with an intriguing ";mo")... We have found these errors in our /iwfnd/error_log screen after the SAP_UI 740 SP09 patch. Seeing this, we have installed GBAPP002 600 SP6 and SRA001 600 SP4 and activated the OData services but have not tried to use the corresponding apps (meaning that we have not done any other app implementation tasks because we don't really intend to for the moment).
In case the two problems are related, these are the responses to these requests:
For gbapp_poapproval request
{"error":{"code":"GBAPP_APV_MSG/013","message":{"lang":"en","value":"Workflow Task Type is not passed as filter criteria"},"innererror":{"transactionid":"53EB173F121613F0E1008000A87C135A","timestamp":"20140814124456.5404250","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"GBAPP_APV_MSG/013","message":"Workflow Task Type is not passed as filter criteria","propertyref":"","severity":"error"},{"code":"/IWBEP/CX_MGW_BUSI_EXCEPTION","message":"An exception was raised.","propertyref":"","severity":"error"}]}}}
For gbapp_prapproval request
{"error":{"code":"GBAPP_APV_MSG/013","message":{"lang":"en","value":"Workflow Task Type is not passed as filter criteria"},"innererror":{"transactionid":"53EB0B1112160FA0E1008000A87C135A","timestamp":"20140814124456.4449070","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"GBAPP_APV_MSG/013","message":"Workflow Task Type is not passed as filter criteria","propertyref":"","severity":"error"},{"code":"/IWBEP/CX_MGW_BUSI_EXCEPTION","message":"An exception was raised.","propertyref":"","severity":"error"}]}}}
For sra001_pcapproval request
{"error":{"code":"SRA001_CMN_MSG/013","message":{"lang":"en","value":"Workflow Task Type is not passed as filter criteria"},"innererror":{"transactionid":"53EB0E4512161140E1008000A87C135A","timestamp":"20140814124456.3244590","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"SRA001_CMN_MSG/013","message":"Workflow Task Type is not passed as filter criteria","propertyref":"","severity":"error"},{"code":"/IWBEP/CX_MGW_BUSI_EXCEPTION","message":"An exception was raised.","propertyref":"","severity":"error"}]}}}
Regards,
Guillaume

JPG fine in Photoshop but error in After Effects: "The file format module could not parse the file (45::36)"

Similar Messages

Maybe you are looking for