JPG's not displaying full colour in Bridge

When I import the images from my Nikon D300s Camera into Photoshop Bridge CS4 the images seem to be a coldish blue color when browsing them, this has only happened with the newiMac 2013 that I have just purchased, it all works fine in my earlier iMac 2009 model, I have checked that the settings are the same as the earlie one and all seems to be ok, when I open them up in photoshop the color returns, I have set everything up as Adobe RGB even on the camera but still not right. I have tried Tiff's and they are fine in bridge same as the RAW files, it is just the jpgs that don't look right. has anyone got any ideas what is wrong. If I open them in Raw and touch them up then open them in photoshop and save them as PSD files they are fine. any idea's.

Here is a link to the site. The homepage doesn't have any
dynamic jpgs so you will have to click the '7 TranScan' button
(this is the bottom button within the menu down the right-hand
side).
This will take you to the '7 Transcan' homepage where one of
the problem jpgs is not displaying. As you'll see it won't display
at all within Flash Player 8 but displays fine in Flash Player 9.
The address is
http://www.sevengroup.co.uk/flash_version.cfm
If you find anything please let me know - thanks in
advance.

Similar Messages

JPG images not displayed correctly in Bridge and Photoshop (Mac OS)

(Note: I have copied the content of this query from the Creative Suites forum where I originally opened it.)
I am using CS4 under OSX 10.4.11 on a PowerMac G5 Quad with 23" Apple cinema display. Images which have been captured as JPG are displayed fine by Preview, but when opened in Bridge, Camera Raw or Photoshop. the colours are all "washed out". The attached screen capture should give an idea of the difference, with the upper being Camera Raw (image settings) and the lower being Preview. My monitor has been calibrated and I'm using sRGB IEC61966-2.1 colour space in Camera Raw and Photoshop. The colours displayed by Preview are pretty close to "real life". I find it virtually impossible to adjust the colours in Photoshop to get back to anything similar.
After opening the image in Photoshop without adjustment, and Save As JPEG with embedded color profile, Preview displays the new image the same as Photoshop. Save As JPEG without embedded color profile, and Preview displays this copy just like the original. It seems that Photoshop is making different (incorrect) assumptions about what color space to use when there is no embedded color profile. Shouldn't it assume sRGB like virtually everything else (http://en.wikipedia.org/wiki/SRGB)? Or is its interpretation of sRGB incorrect? How can I fix this?
Re: JPG images not displayed correctly in Bridge and Photoshop

xxxxyyyyz wrote:
…If there is someone out there who has experience of obtaining decent colour management in CS4 on a Power PC, I would really like to know how you achieved it.
That would be yours truly, and I hasten to reply because I may have some insights that can help you too.
Just get it it out of the way, here's my setup:
Photoshop 11.0.2 ("CS4"); VersionCue disabled and uninstalled.—2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; 1 FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.
I can unambiguously and in good faith represent to you that my color management, from capture to print, is as spot-on as anyone with any kind of setup can hope to achieve. Unequivocally and without qualifications.
Now, first things first: Forget about trying to synchronize color management across the point applications lumped together only by Adobe marketing fiat into a variety of meaningless "creative suites". Concentrate on Photoshop. Do not try to use Bridge to synchronize anything.
The "suites" are a totally artificial construct created by Adobe bean counters and marketing types. The point applications (i.e. the individual programs clumsily bundled together, e.g. Photoshop, Illustrator, InDesign, etc.) are developed independently by separate engineering teams that are not only not in the same building, but in different cities, different states of the American Union, and even in different countries. They have very little communication among them, if any, as evidenced by repeated posts in these forums by Photoshop engineering staff urging us, the end users, to let the other teams know in their own forums that a given problem exists and is actually affecting our work.
Enough said about the cause of the problem. The end result is that Color Management is at very, very different levels of progress and sophistication in each individual point application, with only Photoshop fully entitled to be considered state of the art.
Secondly, a disclaimer: I have been hanging on to my CRT monitors and take care of them as Jascha Heifetz used to take care of his Stradivarius. I don't know what I will do if I manage to outlive the usefulness and accuracy of my CRTs (unlikely at this point). I have despaired in futile efforts to bring the luminosity of any LCD monitor down to where I would feel comfortable calibrating and profiling it. I believe my monitors are the foundation of my color management efforts.
Especially if you have one of the extreme wide-gamut LCD or LED monitors, you'll face an uphill battle.
Be careful to avoid any version 4 icc profiles, whether canned or generated by your calibration software. Stick to version2 icc profiles. Ask the manufacturer of your calibration software/hardware if in doubt.
Here are some not-too-recent, but thoroughly representative screen shots of the calibration results I obtain with my monitors, which I calibrate and profile often and regularly (I validate the calibration at least several times per month).
In a nutshell, my color management practices and settings mirror those described by Bruce Fraser, Jeff Schewe, Andrew Rodney and Gary Ballard's site. I have learned from all of them.
My working color space is ProPhoto RGB. I choose to work with PSD and PSB files. As a long-time, rabid JPEG hater, I only rarely deal with JPEGs, using them sporadically to illustrate a point in this forum or elsewhere in the web. My main output consists of prints.
I only deal with tagged image files (files with an embedded color profile) and often recommend beating up with a baseball bat any moron that hands you an untagged file—figuratively of course, but I find the expression gets my point across unambiguously.
Following is a screen shot of some of my pertinent settings:
Note that I have never bought into the "suite" concept myself. I do have and routinely use Adobe Illustrator 10.x, InDesign 2.x and Acrobat Professional 8.x, but they are all older, independent versions of each point application, licensed at different times.
Be further advised, that the answer to many problems offered by Adobe engineers often is not to install VersionCue, or uninstall it, or at least disable it.
Also, as outlined at the beginning of this post, concentrate on Photoshop, not on synchronizing applications that can't really communicate with each other, despite the claims of Adobe marketing hacks to the contrary.
One big caveat, do not fall into this trap:
xxxxyyyyz wrote:
…I believe my problem has nothing to do with my monitor profile, for several reasons, but…
…It seems extremely unlikely to me that…
You either want to learn, or you don't. You either want to solve your problems, or you don't.
When you start arguing instead of studying, questioning advice instead of following it and detecting where you went wrong, you're on the right track to nowhere. That attitude will get you there fast. Remember you are the one with the problem, and only you can acquire the discipline to learn how to solve it.
Go ahead and ask me anything that is not clear, just don't argue with me please, and don't tell me why you think Fraser, Rodney, Ballard and I are wrong. You see, I am not experiencing any problem that needs fixing. I have an interest in helping you, but not in hearing about your speculations, theories or conclusions.
Good luck.
Wo Tai Lao Le
我太老了

Menu toolbar icons not displayed in colour when deployed on the Web

Hello!
We are developing an application using Forms6i on Windows NT.
Our problem is that menu toolbar icons are not displayed in colour when the application is deployed on the Web using lookAndFeel = generic. This is the case both when using Microsoft IE5 and Netscape 4.5. When lookAndFeel = oracle, however, the icons are displayed in colour.
The icons are stored as *.gif files in the same directory as the application *.html file. It does not help to create a virtual path /web_icons/ in the www listener and edit the parameter default.icons.iconpath in the file Registry.dat.
When running the application as client/server, the menu toolbar icons are displayed in colour as expected.
Any ideas on how to solve this problem?
Regards,
Kjell Pedersen
Nera SatCom AS
Norway
null

Hi,
I got the same problem and I didn't figure out, how to solve this problem.
But did you try to printout the form anyway? I guess you will see the icons on the printout, won't you?
Regards
Dirk

FLVs created with ADOBE MEDIA ENCODER CS6 do not display thumbnails in ADOBE BRIDGE CS6

Could you please attempt to shed some light on why FLVs created with ADOBE MEDIA ENCODER CS6 do not display thumbnails in ADOBE BRIDGE CS6, yet apple finder is able to display thumbnails for these same FLVs without issue?
I'm running CS6 Production Premium with ALL updates installed on 10.6.8
I appreciate any input and help provided the input is provided by someone who either
A) knows the answer because they actually work for adobe
B) actually tried this themselves before attempting to provide a solution
If the conclusion is that it is a codec issue or a header issue with the FLVs You'd have to present a very strong case to back that claim up as it makes no sense whatsoever that CS6 is unable to generate thumbnails for media encoded using CS6, yet Apple finder can without issue. NOT to mention the FLVs in question are CREATED on the same machine with the same codecs installed that is trying to generate previews in Bridge.
Apologies if my frustration is showing, I've gotten and seen several... incompetent replies on this forum regarding this issue and it has never been actually addressed properly as far as I can tell by Adobe support.

We are all just incompetent users here. As pointed out before this is just a user to user forum, Adobe rarely checks in.
I was hoping by now you would have gotten to the bottom of this problem and were offering a solution.

Safari does not display full URL

Safari 6.0.5 will not display full URL until I click in the URL Location bar. For example, the full URL of this page is:
https://discussions.apple.com/community/mac_os/question-post!input.jspa?containe rType=14&container=2131&fromWidget=true&question=Safari%20does%20not%20display%2 0full%20URL
However, in my Safari location bar it displays only the domain level path, i.e.:
https://discussions.apple.com
Is this new behavior a featue or a bug? Is there any way to make it display the full URL as it has since the beginning of time?
Thanks!

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

External Monitor will not display full view MS apps.

I have a HDMI monitor that was previously working fine. The other day I went to use Word and Excel and the applications would only appear in the lower toolbar. When I would select them they would not enlarge. They remained in a thumbnail view. My email and Internet work as expected. Any ideas what's causing this?

Hello @Bjenkins,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your external monitor will not display full view Microsoft applications on your system, and that certain functions will not work on your desktop. How long ago did your applications work properly? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Why Hp2800 Inkjet not printing full colour. Have replaced cartridge and heads

My old HP 2800 suddenly began printing not in full colour - I replaced the colour cartridges, still not full colour printing - then replaced printer heads - still not full colour printing - everything is in black and shades of blue. Please help

Hi melissaccss,
I see you have replaced a cartridge and can no longer print black ink. I appreciate the troubleshooting you have done so far, but please take a look at the following document to see if you have done all that can be done; Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems.
If the issue persists, I recommend calling HP and letting the know the issue as well as the steps you have already completed. It may be helpful to even let them know you completed all of the steps in HP document #c01957673.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Firefox 3.6.3 - ebay pages are centered, do not display full width of screen

Upgraded to Firefox 3.6.3 and my ebay pages are centered and do not display full width of screen as they did in the previous version. Most other pages will automatically adjust to the full width of the screen
== This happened ==
Every time Firefox opened
== Firefox 3.6.3 upgrade

See if anything here helps you. <br />
https://support.mozilla.com/en-US/kb/Images+or+animations+do+not+show

Flash 8 Player - Dynamic jpg's not displaying.

Hi there,
Has anyone else experienced this issue and if so has anyone
got a fix?
Basically, I am using loadMovie() to load a dynamic jpg into
a simple movieclip. When you go to view the website using the Flash
8 player the image doesn't display. However, if you are using the
new flash 9 player the image displays fine.
The information is being pulled from an oracle database, via
coldfusion and flash remoting. The information is obviously being
returned as the images are infact displaying in flash player 9 and
also the text being returned from the same query is also being
displayed correctly.
Any help or ideas will be great.
cheers
the whippet

Here is a link to the site. The homepage doesn't have any
dynamic jpgs so you will have to click the '7 TranScan' button
(this is the bottom button within the menu down the right-hand
side).
This will take you to the '7 Transcan' homepage where one of
the problem jpgs is not displaying. As you'll see it won't display
at all within Flash Player 8 but displays fine in Flash Player 9.
The address is
http://www.sevengroup.co.uk/flash_version.cfm
If you find anything please let me know - thanks in
advance.

XML Publisher report output in RTF format does not display full page

Hi,
We have one XML Publisher report, the output of report in RTF format is not getting displayed in Full Page in normal way (MS Word -->View menu --> Print layout) but we can see full page display when we do MS Word -->View menu --> Outline.
Appreciate your valuable inputs on this.
Is this a template issue or any profiles needs to be set.
Thanks
Vijay

Do you have any header and footer on your template?
If you have any header and footer then try to adjust it as of to display full page.
Thanks
Yasar

Hierarchy Node Variable is not displaying full list of Hierarchy

Hi,
I loaded Hierarchy to an info object using flat file.
When i created a test reports and settings to display of MAster Data of Char and executed the report
The output displays full list of Hierarchy
Now to have a User Entry on Hierarchy ...created a Hierarchy Node variable and executed the value help of Hierarchy Node variable is not displaying fill list of Hierarchy ...its only displaying first 15 entries in Hierarchy.
I changed the settings of variable...etc but couldn't get the Hierarchy full list in User entry selection
How can i fix it...
Thanks in advance

If anyone has the same problem, I think I found the reason when transported to production.
BW7.3 (at least) can not show the hierarchy nodes if there is no transactional data loaded.
So do your hierarchies only after the data has been loaded..

Error Message not displaying full error msg in screen

Hi Frds,
Need to display the error message as my specified words.... . I have created a message class also... even though its not displaying mesage properly
My Message i passed here . R&D Material already exists.........

Hello Kabil,
If you use '&' then your message will be truncate in Status bar message. Best option would be use 'and' instead of '&' the your problem will be resolved.
Cheers,
Vadamalai A

Videos not displaying full screen

I downloaded SD videos from Itunes on my Ipad2 and they will not load full screen. Their is no option to touch to make go full screen or turning the device sideways does not move the movie either. How do I get the movie to play full screen?

Hi,
Are you playing videos ? Some videos may have black bands around. Now using this to test:
http://www.whatismyscreenresolution.com/
Just clik the link, what is the result ? Is it similar to this ? (If can't click, copy it then paste to browser URL/address space).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Firefox does not display full page

I have an application that is being served from a mainframe HTTPD server. The pages do not display correctly in Firefox. I have a column of icons on the left side of the webpage. Each icon will display information on the rest of the webpage in multiple frames. There is a black bar at the top of the screen. My webpage is above this black bar. I have to pull down the black bar to see my webpage. I also tried this in Firefox safe mode (same results). Every time I click on an icon to open the webpage, I have to pull the black bar down again. How can I get my page to display correctly? I installed the "IE TAB 2 extension" and that didn't help.

I already tested in Firefox safe mode which removed extensions and plugins. I am including 2 files. 1) A screen shot with the black line at the top of the screen. 2) A screen shot when I pull down the black line. When I pull down the black line, the application webpage is visible. Note: I have a dual monitor setup so the captured Paint screens are twice as wide.
The Firefox troubleshooting information is as follows.
Application Basics
Name: Firefox
Version: 28.0
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:28.0) Gecko/20100101 Firefox/28.0
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: Symantec Vulnerability Protection
Version: 12.2.0.5 - 1
Enabled: false
ID: {BBDA0591-3099-440a-AA10-41764D9DB4DB}
Important Modified Preferences
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.disk.smart_size_cached_value: 358400
browser.places.smartBookmarksVersion: 6
browser.sessionstore.upgradeBackup.latestBuildID: 20140314220517
browser.startup.homepage_override.buildID: 20140314220517
browser.startup.homepage_override.mstone: 28.0
dom.mozApps.used: true
extensions.lastAppVersion: 28.0
gfx.direct3d.last_used_feature_level_idx: 0
network.cookie.prefsMigrated: true
places.history.expiration.transient_current_max_pages: 103957
plugin.disable_full_page_plugin_for_types: application/pdf
privacy.sanitize.migrateFx3Prefs: true
Graphics
Adapter Description: ATI Radeon HD 3400 Series
Adapter Drivers: aticfx64 aticfx64 aticfx32 aticfx32 atiumd64 atidxx64 atiumdag atidxx32 atiumdva atiumd6a atitmm64
Adapter RAM: 256
Device ID: 0x95c5
Direct2D Enabled: true
DirectWrite Enabled: true (6.2.9200.16571)
Driver Date: 1-26-2011
Driver Version: 8.821.0.0
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 10
Vendor ID: 0x1002
WebGL Renderer: Google Inc. -- ANGLE (ATI Radeon HD 3400 Series Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: false
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.3
Version in use: 4.10.3
NSS
Expected minimum version: 3.15.5 Basic ECC
Version in use: 3.15.5 Basic ECC
NSSSMIME
Expected minimum version: 3.15.5 Basic ECC
Version in use: 3.15.5 Basic ECC
NSSSSL
Expected minimum version: 3.15.5 Basic ECC
Version in use: 3.15.5 Basic ECC
NSSUTIL
Expected minimum version: 3.15.5
Version in use: 3.15.5

My macbook pro does not display full screen

my macbook pro wont display full screen in any appp. it has a one inch margin black on both sides

Hi there joemoto,
You may need to adjust your display resolution. Take a look at the article below for more information.
OS X Mountain Lion: Adjust your display resolution
http://support.apple.com/kb/PH11462
-Griff W.

JPG's not displaying full colour in Bridge

Similar Messages

Maybe you are looking for