JSP is not updated after redeploying new war file

Hi
I have a simple code change in JSP in a war file. When I redeploy the war file, I do not see modified JSP. Very strange.
I am using Weblogic 8.1 and copying new war file under Admin/upload folder.
Thank you
RM

Here are the steps:
1. Modify JSP
2. Run ant to create new war file
3. Copy war file to Weblogic's Admin/upload/web_module_name folder
Redeploy Application from console or restarting admin and appserver does not seem to unjar modified war file into Admin/upload and Stage folders. Can someone tell me how to force weblogic to take this new war file to deploy into Stage area?

Similar Messages

  • Firefox will not update after installing new version

    I have repeatedly updated Firefox (both by updating and by uninstalling completely and re-installing a fresh copy of the latest version) and when I go to HELP > ABOUT FIREFOX it shows I have version 6.0.2
    BUT
    SEVERAL sites (including Mozilla.com) give me pop-up notices saying I am using an outdated version of Firefox and need to upgrade. Firefox on this PC even looks and acts different than it does, for example on my other Windows 7 PC (which also has v 6.0.2)
    HOW can I get Firefox to actually fully update itself and not only report that it's the latest version (I see that in the config it's reporting v 3.0.11) but to act like the latest version?
    Like I said, I have tried uninstalling it completely and installing a fresh copy downloaded from Mozilla.com.

    Your User Agent used to post with is Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.11) Gecko/2009060215 Firefox/3.0.11 FBSMTWB
    See https://support.mozilla.com/en-US/kb/new?title=Web+sites+or+add-ons+incorrectly+report+incompatible+browser
    Check the '''general.useragent''' prefs on the '''about:config''' page.
    You can open the '''about:config''' page via the Location (address) bar, just like you open a website.
    Filter: '''general.useragent'''
    If any '''general.useragent''' prefs are bold (user set) then right-click that pref and choose '''Reset'''.
    It may likely be due to the FBSMTWB on end of your useragent that the Fast Browser Search toolbar extension you have now or had and it added on to UA.

  • SSRS 2008 - report layout not updating after uploading new version

    So I changed the layout from portrait to landscape on a report, uploaded it again (marking it to be overwritten), but when doing a print preview or actually printing the report to the printer or pdf, the layout has not changed.  Is something being cached?
     I even deleted the report and uploaded again, still the same thing.
    suggestions?
    [edit]
    I looked oln the 'Execution' tab of the report in ReportManager, and the radio button for "always run this report with the most recent data" was selected.

    Disregard...  duh, I was loading them from a previous folder that had older reports in it.  Nothing like stupid user error to waste an hour.
    Note:
    Make sure you know where your loading your RDL files from 

  • Redeploying a war file in tomcat 6.0.16 Options

    Hi All,
    Tomcat is undeployed the application and trying to deploy the new war file.
    But tomcat did not able to redeploy the war file and no errors in to log file also.
    I am using tomcat 6.0.16. Msg in the log file is as follows
    INFO: Undeploying context [evpn]
    Nov 17, 2008 3:21:21 PM org.apache.catalina.startup.HostConfig deployWAR
    INFO: Deploying web application archive evpn.war
    Nov 17, 2008 3:22:59 PM org.apache.catalina.core.StandardService stop
    INFO: Stopping service Catalina
    Nov 17, 2008 3:23:00 PM org.apache.catalina.core.StandardContext stop
    INFO: Container org.apache.catalina.core.ContainerBase.[Catalina].
    [localhost].[examples] has not been started
    Nov 17, 2008 3:23:00 PM org.apache.coyote.http11.Http11Protocol destroy
    INFO: Stopping Coyote HTTP/1.1 on http-8080
    your help values more to me.
    Thanq very much..............

    Hi all,
    I don't want to restart the tomcat to redeploy this war file.
    Plz help me out ......

  • Why Netflix does not open after the new 7.0 update?

    WHY  Netflix does not open after the new update 7.9?

    Vincent149 wrote:
    I went to At&t yesterday, they said you have to call Apple support! Which im gong to try today since no one on here has posted anything back! Im frustrated! Maybe its there way of selling new phone!!!!
    These are user to user forums.  You are not addressing Apple by posting here.  If some other person has a solutoin for you, then they will post it.

  • HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Sorry for being unclear.
    When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list).  I will already be logged in with the Apple ID I use for everything (my dev account).  I will be able to update all of the other various applications needing updating except for my Final Cut Pro.  When I click the update button next to the FCP update, it will give me an error saying  "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
    I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite.  FCP was working fine until the upgrade.  Is there anything that can be done to fix this?

  • Picked Quantity is not updated After delivery in Vl03n

    After delivey in Order (VA03), the picked quantity is not updated Properly(VL03n). It is coming as Zero.
    Is it any configurations needed or writng any code.
    For that I put Break point in FMs like SD_DELIVERY_UPDATE_PICKING in program RVADEK01.
    But it is not stopping the Program.
    Please give any possible solution.

    Hi Vinod,
    Thank u For ur Answer.
    Just my Fuctional Consultant given Procedure.
    How to test the picking list. The problem is after Deliver  the Order quantity in VA03 and after saving, this will creates One Out Bound delivery.
    Now We r checking VL03n. Now it is updating the Picked Quantity Correctly, For that We r using the Standard Print program: RVADEK01, Form: RVPICSKSIN.
    Output Type: EK00, Application: V4.
    Here My problem is We copied the Form and print Program and modified according to our requirement and they configured in Nace with our own Output type.  We haven't chenged the updated Functionality and Not even Standard program. We wrote some include program for getting new values in scripts.
    Now the picked quantity is not updated after picking in VL03n.

  • Itunes will not update to a newer version.

    Itunes will not update to a newer version. The error received sates an older version could not be removed.

    The error is specifically an older version of Itunes could not be removed.
    Many thanks, alex. We'll first try the iTunes variation of my standard instructions, then.
    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • Node.length not updating after removeInstance

    I have a dynamic form where line items can be added dynamically. I also have a button to remove the last line item. The code worked fine until Acrobat 7.0.7 now I get an error that the index in the removeInstance method is invalid. After doing some debugging it appears that the node.length is not updating after a removal of an instance.
    For example, the form starts with 1 line item. (node.length = 2, index = 0)
    I can successfully add a new line item (node.length = 3, index = 1)
    I then can add another line item (node.length = 4, index = 2)
    I can successfully delete the last line item (index = 2) using the following code:
    var nodelength = form1.items.nodes.length;
    //need to know which instance is being removed
    if(nodelength>2){
    items.item.instanceManager.removeInstance(nodelength-2);
    else if(nodelength==2){
    form1.items.items.Status.rawValue = "";
    form1.items.items.guestName.rawValue = "";
    form1.items.items.Payment.rawValue = "";
    form1.items.items.Entree.rawValue = "";
    At this point the items.node.length property should be 3 but it remains 4 thus causing an error when running the above script again because there is no corresponding item to remove.
    This appears to be a bug - but if I am doing something wrong please let me know. If it is a bug, please fix it.

    This sounds like a bug I recently encountered. If it's the same thing then calling xfa.form.remerge() after the removeInstance() should correct the problem. If it is the same issue, it's already been logged in order to get it fixed.
    Chris
    Adobe Enterprise Developer Support

  • HT5460 I can  not update to the new OS X Mountain Lion. Whenever I do I get a message an error has occurred, timed out 102.W

    I can not update to the new OS x Mountain Lion.  I get an error that  says it has timed out then "102".   WHy can't I get it update??
    Thanks for your help.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Documents that are park in FBV0 do not update with the new user name when

    Hi,
         I need to find out why documents that are park in FBV0 do not update with the new user name when any changes are made.  Also when we park using MIR7 and make changes to the documents at a later time the document updates with the new users name.
    Requesting you to please suggest what could be the reason.
    Earliest reply will be highly appreciated,
    With regards,
    Rj

    Hi,
        I have checked this in system. I posted one Parked invoice using T.code FV60 and there i appeared my name because i created. But after some time one of my collegue changed the reference and text field with his login i.d. But still in the invoice it is showing as my name whereas if we go to the environmnet, there in the changes we can see what are the changes done and it is appearing my collegues user i.d. But in the main invoice it is still appearing my name.
    Regards,
    Rj.

  • I have a problem with the iPhoto not updating after the hard drive recall.

    The iPhoto with not update after doing the Hard Drive Recall. It keeps saying I don't have the right ID. I have tried resetting all my passwords and no change. What do I need to do to fix this problem?

    Which OS version did you have when you acquired iPhoto and was it on a DVD (iLife) or did you download it from the app store initially?
    And, last question, did you skip Mavericks? Mavericks owners were given the opportunity to update iPhoto to an app store version free of charge; if you skipped it and do not have a backup or the installer DVD or purchased a new computer recently, then you'll need to purchase it.

  • AME will not update to the new release

    AME will not update to the new release.  Tried from the help menu in both AME and Premiere.  It Fails each time I try.  Is this a known issue.  I was not able to update AE or Premiere from the CC app manager.  I had to update those both from the update item in the help menus of each program.  What is going on?

    There are two steps in patching via creative cloud or from within the application.
    1. download the patch
    2 apply the patch
    Which stage failed for you? 
    I did run into download issue yesterday where CC tried to download patches for a few apps at the same time and it failed to download.  I suspect the servers that patches reside on were busy.  When I tried it a few hours later, it worked.
    You can download the manual patchers from these locations:
    http://www.adobe.com/support/downloads/product.jsp?product=160&platform=Macintosh
    http://www.adobe.com/support/downloads/product.jsp?product=160&platform=Windows

  • I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?

    I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?

    Hey there rmflint,
    It sounds like you are wanting to update the Apps that were synced over from your computer to your new iPhone 5s. If you are clicking Updates in the App Store in the bottom right corner, would you mind clarifying what happens when you are trying to update them? 
    App Store at a glance
    http://help.apple.com/iphone/7/#/iph3dfd8c19
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • OC4J:home is not coming up after deployment of war file(i.e demantra war)

    Hi,
    The oc4j:home services is not coming up in OracleAS 10.1.3.2 Middle Tier after deplyment of war file(j2sdk 1.4.2_10)
    I tried so many times bouncing but oc4j:home is not coming up. Below is the status.
    Please guide me and help me.
    D:\product\10.1.3.2.0\OracleAS_10\opmn\bin>opmnctl startall
    opmnctl: starting opmn and all managed processes...
    ================================================================================
    opmn id=WG8LSW3J:6201
    2 of 3 processes started.
    ias-instance id=OracleAS.WG8LSW3J.ced.corp.cummins.com
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    default_group/home/default_group/
    Error
    --> Process (index=1,uid=687477649,pid=5304)
    time out while waiting for a managed process to start
    Log:
    D:\product\10.1.3.2.0\OracleAS_10\opmn\logs\\default_group~home~default_grou
    p~1.log
    The log file of default_group~home~default_group~1.log
    08/09/30 19:41:51 Start process
    WARNING: Code-source D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\applications\demantra\demantra\WEB-INF\lib\activation.jar (from WEB-INF/lib/ directory in D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\applications\demantra\demantra\WEB-INF\lib) has the same filename but is not identical to /D:/product/10.1.3.2.0/OracleAS_10/j2ee/home/lib/activation.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader demantra.web.demantra:0.0.0.
    WARNING: Code-source D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\applications\demantra\demantra\WEB-INF\lib\mail.jar (from WEB-INF/lib/ directory in D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\applications\demantra\demantra\WEB-INF\lib) has the same filename but is not identical to /D:/product/10.1.3.2.0/OracleAS_10/j2ee/home/lib/mail.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader demantra.web.demantra:0.0.0.
    2008-09-30 19:42:01,650 [OC4J Launcher] DEBUG appserver.system :: Configuration file loaded > D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\applications\demantra\demantra\conf\logconf.lcf
    2008-09-30 19:42:01,650 [OC4J Launcher] DEBUG appserver.system :: Logs will be dumped to D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\applications\demantra\demantra\conf\..\logs\collaborator.log
    2008-09-30 19:42:01,650 [OC4J Launcher] DEBUG appserver.system :: Logs will be dumped to D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\applications\demantra\demantra\conf\..\logs\integration.log
    2008-09-30 19:42:01,665 [OC4J Launcher] DEBUG appserver.system :: Value for parameter client.javaPlugin.downloadUrl was not specified, using ../plugin/
    2008-09-30 19:42:01,681 [OC4J Launcher] DEBUG appserver.system :: Starting Service Demantra Application Server/7.1.1 (118)
    08/09/30 19:42:01 ................................2008-09-30 19:51:11,747 [OC4J Launcher] WARN appserver.system :: Object is not valid :
         Invalid EXTRA_FRON and EXTRA_WHERE expressions, missing expected join for EXTRA_FROM tables: BRANCH_DATA, therefore EXTRA_FROM and EXTRA_WHERE expressions will be ignored, Series: 'Event Sim'.
    2008-09-30 19:51:11,747 [OC4J Launcher] WARN appserver.system :: Object is not valid :
         Invalid EXTRA_FRON and EXTRA_WHERE expressions, missing expected join for EXTRA_FROM tables: BRANCH_DATA, therefore EXTRA_FROM and EXTRA_WHERE expressions will be ignored, Series: 'Evt Cost'.
    Please anybody help me .
    Thanks & Regards,
    Ravi Kumar

    You might want to check these logfiles:
    D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\applications\demantra\demantra\logs\collaborator.log
    D:\product\10.1.3.2.0\OracleAS_10\j2ee\home\applications\demantra\demantra\logs\integration.log
    These logfiles should give you more clues. Seems it is missing some "objects", but what these objects are is rather undefined.

Maybe you are looking for

  • Error while mapping BAPI wrappers.

    Hi, I have two SAP standard BAPIs (GetList & GetDetail) related with Inventory. When I assigned these BAPIs into my SyncBO and tried for mapping, I got an error "No import parameter refering to a filed of header structure exists in GetDetail BAPI Wra

  • T.code on PO list

    Hello, Is there ant t.code on PO list with below data? (I tried ME2L, ME2M ) Period: Date of the request, who made it, who approved. Purchase order: Date, Order Number, who made it. Status: closed or open.

  • Webi Vs Bex Analyzer for the same query

    Hi Experts , I face an issue in Webi Vs Bex Analyzer for the same query : Output of Bex query: Transport System     Location ID     Quantity PIPEC1-Z4          LOCCP1-Z4     1,000.000 BBL                           LOCCP2-Z4     400 TO                

  • Apps that use GPS Location

    Has anyone else noticed that apps that rely on your location based on GPS don't update when you open them? You have to go to the Default maps app and tap on the GPS button, let it acquire your location and then open up your other app and it will be c

  • Ora 10g client compatibility

    Accessing Oracle 8.1.7.3 databases with a 10.1. Client produces an ORA-03134 error - access to a server version not supported any more. Where can I find which versions are supported - the documentation that comes with the client says nothing about it