Jstart.exe stopped and MAXDB CE1 service not starting

Hi
I am installing EHP1 for SAP NetWeaver Composition Environment 7.1 - Preview Version CE711SP1_SDN-Preview
the installation was successful and I could work on the server after that.
But when I restarted my machine now i can not start the server the jstart.exe is stopped and when i see the services then MAXDB CE1 is not starting
can anyone help me in starting the server
Regards
JM

In my case I had to manually start the MAXDB instace from command line....and then start the CE1 instance from SAP MMC.
However the license that comes with the preview version is not valid...you have to request for a license key from minisap website and install it on the sap system. Unfortunately I could not locate the saplicense.exe program from the preview version of SAP CE install....anybody has any ideas?

Similar Messages

Server does not start /jstart.exe stopped

Hi everyone! Unfortunately my jstart.exe stops abnormally.
Please, help.
This happed after changing the value in the field u2018Custom Number Of Nodesu2019 and restarting the server.
trc file: "D:\usr\sap\VW6\J00\work\dev_jstart", trc level: 1, release: "711"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS All, egi
F [Thr 744] *** LOG => connected to Enqueue Server.
F [Thr 744] *** LOG => connected to Message Server.
F [Thr 744] *** LOG => Starting run level 1.
F
F [Thr 744] Tue Oct 06 13:29:13 2009
F [Thr 744] *** ERROR => SfICreateFiElem: FiInit(JSF-FI-BRSESS, 1, 32) failed (rc = 6 invalid argument) [jsfxxsbase.c 1935]
F [Thr 744] *** ERROR => SfEInternalError: SfCInstanceManager::createDynShm: SfCreateDynShm failed (rc = 1 general error) [sfxxinst.hpp 566]
F [Thr 744] *** LOG => Instance state is "Not started" (STARTING @ 0, INACTIVE).
F [Thr 744] *** LOG => Instance state is "Some processes running" (RUNNING @ 0, INACTIVE).
Edited by: Sergey Talchuk on Oct 6, 2009 2:29 PM

Hi Tobias,
1. NW was stopped via SAPMMC console
2. Custom Number of Server Nodes field value was changed to 2 in configtool
3. NW was successfully started and stopped via SAPMMC console
4. Custom Number of Server Nodes field value was changed to N/A (to get the previous config and since the field does not allow empty values.)
5. As the result the issue above occured (starting/restarting did not help)
Thank you
Unfortunatelly default trace is not updated. Start Up procedure stops very quickly (after about 30 seconds)
Jstart.exe stops after 04 sec elapsed time.
Edited by: Sergey Talchuk on Oct 6, 2009 4:39 PM

Jstart.exe stopped!!

Sorry this is the content of log_bootstrap.0 file:
[Sep 10, 2007 1:21:29 PM ] * Properties used for initialization: {element.resynch=detect, Logging properties = {log[defaultTrace]=FileLog, .logs=log[defaultTrace],log[consoleLog], log[defaultTrace].pattern=..\..\work\log_bootstrap.log, /.severity=Info, log[consoleLog].formatter=formatter[ConsoleFormatter], formatter[ConsoleFormatter]=TraceFormatter, log[consoleLog]=com.sap.engine.bootstrap.logging.BootstrapConsoleLog, log[defaultTrace].cnt=3, formatter[BootstrapFormatter]=TraceFormatter, log[defaultTrace].formatter=formatter[BootstrapFormatter], formatter[ConsoleFormatter].pattern=%m, log[defaultTrace].limit=5242880, .severity=Info, formatter[BootstrapFormatter].pattern=[%24d] %m}}, debugoff
[Sep 10, 2007 1:21:29 PM ] * Bootstrap initialized for 640 ms.
[Sep 10, 2007 1:21:29 PM ] * Initializing DB connection...
[Sep 10, 2007 1:21:32 PM ] Entering setDefaultsFromProperties()
[Sep 10, 2007 1:21:32 PM ] com.sap.sql.trace.standalone_impl LOGGING
[Sep 10, 2007 1:21:32 PM ] com.sap.sql.trace.j2ee.cnt is 10
[Sep 10, 2007 1:21:32 PM ] com.sap.sql.trace.j2ee.limit is 10000000
[Sep 10, 2007 1:21:32 PM ] Exiting setDefaultsFromProperties()
[Sep 10, 2007 1:21:32 PM ] Entering setDefaultsFromProperties()
[Sep 10, 2007 1:21:32 PM ] com.sap.sql.trace.standalone_impl LOGGING
[Sep 10, 2007 1:21:32 PM ] com.sap.sql.trace.j2ee.cnt is 10
[Sep 10, 2007 1:21:32 PM ] com.sap.sql.trace.j2ee.limit is 10000000
[Sep 10, 2007 1:21:32 PM ] Exiting setDefaultsFromProperties()
[Sep 10, 2007 1:21:32 PM ] SecStoreFS object initialized.
[Sep 10, 2007 1:21:32 PM ] setDefaultFilenames () called, filename = "C:\usr\sap\CE1\SYS\global/security/data/SecStore.properties".
[Sep 10, 2007 1:21:32 PM ] File version = "7.00.000.001", software version = "7.00.000.001".
[Sep 10, 2007 1:21:32 PM ] File version = "7.00.000.001", software version = "7.00.000.001".
[Sep 10, 2007 1:21:32 PM ] setDefaultKeyFilename () called, filename = "C:\usr\sap\CE1\SYS\global/security/data/SecStore.key".
[Sep 10, 2007 1:21:32 PM ] Check record okay.
[Sep 10, 2007 1:21:32 PM ] Existing store opened.
[Sep 10, 2007 1:21:32 PM ] File version = "7.00.000.001", software version = "7.00.000.001".
[Sep 10, 2007 1:21:34 PM ] Component: [internal/unkown] of type [unkown]
Message: [Exception occurred:]
com.sap.engine.bootstrap.SynchronizationException: Database connection initialization failed. Check if the database is running and the database properties.
at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:79)
at com.sap.engine.bootstrap.Bootstrap.initializeSynchronizer(Bootstrap.java:66)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:208)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:409)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:153)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:48)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:176)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:263)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:57)
at com.sap.engine.bootstrap.HelperImpl.getConfigurationHandlerFactory(HelperImpl.java:38)
at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:77)
at com.sap.engine.bootstrap.Bootstrap.initializeSynchronizer(Bootstrap.java:66)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:208)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://privato-0922f88/CE1 [Restart required].
at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:216)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.createVendorConnection(DriverPooledConnectionFactory.java:50)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:37)
at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:687)
at com.sap.sql.connect.datasource.DBDataSourceImpl.newPooledConnection(DBDataSourceImpl.java:631)
at com.sap.sql.connect.datasource.DBDataSourceImpl.getPooledConnection(DBDataSourceImpl.java:159)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:211)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:353)
... 14 more
[Sep 10, 2007 1:21:34 PM ] [Bootstrap]> Problem occurred while performing synchronization. For more details see the logs above.
Do you want another log?

See my reply in your other thread: jstart.exe stopped!!
BTW, please do not open duplicate threads for the same issue.
Thanks,
-- Vladimir

Oracle service, Listener and http server does not start automatically

Hello,
I have Oracle 9i release 2 installed on Unix HP box if system restart in case of power failure the Oracle service, Listener and http server does not start automatically, is there any ready reference available to check what's wrong is happening(I don't have knowledge of Unix).
Thanks, Khawar.

Hi Rajesh,
Thanks for reply, I will check this link and will be back if facing problem.
Regards, Khawar.

When i turned on my i pod a white apple logo was shown which then turned to rainbow colours and the i pod started buffering, this is all it does, i cannot get it to stop and my computer will not talk to the i pod, help?

when i turned on my i pod a white apple logo was shown which then turned to rainbow colours and the i pod started buffering, this is all it does, i cannot get it to stop and my computer will not talk to the i pod, help?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have updated itunes but now phone and ipod will not connect to pc - message reads apple mobile device service not started

i have updated itunes and cannot connect devices - apple mobile device service not started?

Hello there, mikemason5.
The following Knowledge Base article provides some great troubleshooting recommendations:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

SMF and multi-user service not running

Hi,
I have an issue with several services not starting ...
As you can see, the multi-user services is "offline*" And it remains like this...
I've recently patched the system hoping it would resolve this issue, but no luck. Restarting the server does not help.
# svcs | grep multi-user
offline 14:14:21 svc:/milestone/multi-user-server:default
offline* 14:14:53 svc:/milestone/multi-user:default
# svcs -xv
svc:/milestone/multi-user:default (multi-user milestone)
State: offline since Wed Dec 05 14:14:53 2007
Reason: Start method is running.
See: http://sun.com/msg/SMF-8000-C4
See: man -M /usr/share/man -s 1M init
See: /var/svc/log/milestone-multi-user:default.log
Impact: 6 dependent services are not running:
svc:/system/webconsole:console
svc:/milestone/multi-user-server:default
svc:/system/basicreg:default
svc:/system/zones:default
svc:/application/graphical-login/cde-login:default
svc:/application/cde-printinfo:default
I've tried to enable the services above manually, but had no luck.
Thanks.

Darren_Dunham wrote:
>
# svcs | grep multi-user
offline 14:14:21 svc:/milestone/multi-user-server:default
offline* 14:14:53 svc:/milestone/multi-user:default
# svcs -xv
svc:/milestone/multi-user:default (multi-user milestone)
State: offline since Wed Dec 05 14:14:53 2007
Reason: Start method is running.The start method of milestone/multi-user is responsible for (among other things), running all the /etc/rc2.d scripts. If you've placed a startup script in there and it's hanging, you'll see this behavior. From memory, I think there's a 30 minute timeout before it gives up and continues.
During the problem period, you probably want to do a 'ps -ef | grep rc' and look for any rc scripts running. That will probably point to a startup script hanging.
DarrenThanks Darren,
That was the problem. A hung script in rc2.d/
What is odd, is that this script is the same on many of our machines and no problems have been found until now. Thanks for your help. Killing that processes made everything start properly.

I am unable to update to IOS5 from Itunes, says "mobile device services not started". What is this and how do I fix it?

I am unable to update to IOS5 from Itunes, says "mobile device services not started". What is this and how do I fix it?

Here is a YouTube video which should guide you through a solution: http://www.youtube.com/watch?v=VLFAo-FWLxE

SAP Service Not Starting in BI 7.0

Hi All,
Today morning my BI 7.0 server restarted twice automatically, then I started the server in last known good configuration after that when I tried to start the server from SAP MMC it didn't started and when i checked the sap service in services.msc it gives error <b>"Some services stop automatically when they have no work to do"</b>.and didn't get started.
I found a thread similiar to this problem and following that I used sapstartsrv.exe in usr\sap\SID\......\exe directory. This didn't worked for me and by using this Both the services SAPEP2_00 and SAPEP2_01 got removed from services.msc.
Now I have installed these service again and now I am at same status as in morning,
In Event log
For SAPEP2_00 and SAPEP2_01 the following error are avaliable:
--Initialization failed. Service not started. [ntservmain.cpp 1269]
--Unable to change to Directory
gms40\saploc\EP2\DVEBMGS00\work. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 966]
If any one have gone through such situation please help me out from this, Its has became too critical for me now.
Thanks in advance....
Regards
Vinay Paul

Hi
Service are started now but when I am trying to start the server, it is showing strdbs.cmd, sapcpe.exe in red status "could not be started".
Regards
Vinay Paul
Message was edited by:
Vinay Paul

Remote Desktop Management service not starting. service-specific error: %%2284126209 - Event ID: 7024

Hi Forum members,
We have a client that has intermittent issues with RDS on a 2012 R2 server.
As an overview of the environment, the client has a single VMWare host support 2 x Windows 2012 R2 VMs one is the File/Print/Email server and the 2nd is the RDS server used to allow the client to run MYOB Enterprise. Both servers have the AD DS role and
DNS roles amongst others.
The 1st issue is that the RD Connection Broker shows the error: "The server pool does not match the RD Connection Brokers that are in it. and then "1. Cannot connect to any of the specified RD Connection Broker servers".
The above issue seems to be caused by the RDMS service not starting. When you attempt to start it, the service stops and the error in the title is logged in the "System" event log. Full transcript below:
Log Name:      System
Source:        Service Control Manager
Date:          21/01/2015 4:50:32 PM
Event ID:      7024
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      intentionally removed.local
Description:
The Remote Desktop Management service terminated with the following service-specific error: %%2284126209
Event Xml:
<Event xmlns="
<System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7024</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-21T05:50:32.129949400Z" />
    <EventRecordID>53721</EventRecordID>
    <Correlation />
    <Execution ProcessID="568" ThreadID="12436" />
    <Channel>System</Channel>
    <Computer> intentionally removed.local</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">Remote Desktop Management</Data>
    <Data Name="param2">%%2284126209</Data>
    <Binary>520044004D0053000000</Binary>
</EventData>
</Event>
In addition in the "Application" event log, the following error is logged:
Log Name:      Application
Source:        MSSQL$MICROSOFT##WID
Date:          21/01/2015 5:24:47 PM
Event ID:      18456
Task Category: Logon
Level:         Information
Keywords:      Classic,Audit Failure
User:          NETWORK SERVICE
Computer:      intentionally removed.local
Description:
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Could not find a login matching the name provided. [CLIENT: <named pipe>]
Event Xml:
<Event xmlns="
<System>
    <Provider Name="MSSQL$MICROSOFT##WID" />
    <EventID Qualifiers="49152">18456</EventID>
    <Level>0</Level>
    <Task>4</Task>
    <Keywords>0x90000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-21T06:24:47.000000000Z" />
    <EventRecordID>4228336</EventRecordID>
    <Channel>Application</Channel>
    <Computer>intentionally removed.local</Computer>
    <Security UserID="S-1-5-20" />
</System>
<EventData>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data> Reason: Could not find a login matching the name provided.</Data>
    <Data> [CLIENT: <named pipe>]</Data>
    <Binary>184800000E0000001F00000055004E0047004500520045005200410055005300530056005200300033005C004D004900430052004F0053004F0046005400230023005700490044000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
I have been attempting to resolve these errors for some time, without success. I have read the many KBs and forum entries related to the above and applied a number of the suggested fixes, including the one which suggests to add the NT SERVICE\ALL SERVICES
to the "Logon as a Service" in the "User Rights Assignment" of the "Default Domain Policy" which is linked to the domain level, that both servers are objects of.
My question to the forum is, can anyone come up with a solution to resolve the above issues and all the RDMS service to start which will then hopefully resolve the broker error?
Regards,
David West.

Hi David,
If virtual machines on the server are Windows Server 2012, then it is not supported to install Remote Desktop Connection Broker on a Domain Controller.
More information for you:
Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012
http://support.microsoft.com/kb/2799605/de
Guidelines for installing the Remote Desktop Session Host role service on a computer running Windows Server 2012 without the Remote Desktop Connection Broker role service
http://support.microsoft.com/kb/2833839
If the VMs are Windows Server 2012 R2, I suggest you install RDS on a separate machine to see if the issue persists.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Fix for Apple Mobile Device Services not starting

Finally a fix for Apple Mobile Device Services not starting. Basically I got this from someone else in these forums and it worked. Go to C:\Documents and Settings\AllUsers\Application Data\Apple and delete any file in there that says Apple Mobile Device Services (I understand these are cached files...I had about 8 files to delete). Next go to your control panel, click on Add/Delete programs, find Apple Mobile Device Support and delete (remove) it. Once this is all done do not reboot, rather open itunes and go to Help menu /Check for Updates and update to the latest version. This will install the latest version of iTunes and also a new version of Apple Mobile Device Services. Next reboot and it should work for many of you...it did for me. Open iTunes and plug in your device...good luck. I wrote this from memory so if some of the phrases don't match exactly what you see I apologize. Also, this worked for me on a Windows XP computer.

Thanks for posting this, my iTunes randomly started saying the Apple Mobile Device was stopped, and apple's solutions didn't help. I hope this one will, but what do I do if I have the latest iTunes, so it doesn't update? Wait till they come out with an update? It says I need to run the iTunes installer, but I can't find that. Please help, this is really annoying me...=(

OracleHome92 agent service not started

hai All,
I renamed my windows 2003 server machine. After rebooting the server a message appears that oracle intellegent agent exectable encountered a problem and needed to close. After that I noticeed that The oracleHome92 agent service not started. I cannot able to start that service.some eror occurs.... need any extra change?
Please help?
Shiju

You wrote: "Some error occurs"
Let me rephrase that for you: "My car won't start tell me why."
No one can help you if you don't post relevant information.
My advice ... Stop doing things when you don't know the implications. That is why testing environments exist. Rename the server back to its original name and then learn what to do, and test it, before doing it again.

Apple mobile device service not started

Each time i try to sync my iphone to itunes it keeps on saying "apple mobile device service not started"
I know how to start it and everything its that when i start it it says "Windows could nt start the Aplle Mobile Device service on local computer"
I have the newest itunes and i have windows 7

first I would check the event viewer for into about what goes wrong that cause the service to fail
if this don't give a clear image about what the problem is
then I would uninstall itunes and resinstall it
if that didn't help I would ask questions about solve the problem in the itunes for windows forum where people wise in the ways of itunes would be more likely to read your post
https://discussions.apple.com/community/itunes/itunes_for_windows

Apple mobile device service not started please help

Each time i try to sync my iphone to itunes it keeps on saying "apple mobile device service not started"
I know how to start it and everything its that when i start it it says "Windows could nt start the Aplle Mobile Device service on local computer"
I have the newest itunes and i have windows 7

when i start it it says "Windows could nt start the Aplle Mobile Device service on local computer"
Does Windows give you an error code number when AMDS fails to start, Love? If so what number do you you get?

Oracle distributed document capture service not started

Oracle distributed document capture service not started
and timeout

I did check the Distributed Document Capture Configuration (from the Start menu) and it also indicates that I have selected "Oracle Distributed Document Capture Prompted Login". Once I click "OK" after I supplied all the paths required by server settings, it also displays the error "The username and password could not be validated". What credentials should be entered in the User ID / Password / Domain fields? You should use the username and password entered while configuring the "capture" security model. Leave the domain field blank.
I have not yet configured the IIS at this point. Is it required for the Capture application to authenticate the user I specified during the installation configuration at login? IIS will serve web ODDC interface and will be needed for authentication while accessing ODDC web pages. I beleive that it is not needed for authentication from ODC/ODDC applets. However, when something is not working as expected, I would first finish all required installation and especially post installation setup steps.
I had a look at the IIS configuration in the installation document. It doesn't clearly state which document is the default document for the website one needs to create in IIS. Do you know what it should be? You have to add new web site, say like "Capture" and add virtual directory from assumed path like: C:\Program Files\Oracle\Document Capture\WebPages
For the default document I have WebCapture.asp.
The Oracle Distributed Document Capture service does no start on my PC. Is this required for me to atleast login to the Capture application? It's required only for processing the scanned batches.
I hope that this will help.
Boris
Edited by: tombo on 2012.03.16 06:32

Jstart.exe stopped and MAXDB CE1 service not starting

Similar Messages

Maybe you are looking for