JSTL WLS 7 to WLS 8.1 Upgrade Issues

We have a web app that currently runs on WLS 7. We have been asked to upgrade the app to WLS 8.1 recently. Most of the screen have ported fine, but there are a couple of screens that seem to be throwing fits. It could be a JDK/JRE issue, but here is the scenario
          jstl looks up a string variable property which is set to either "Y" or "N". Using WLS 7, it comes back as either "Y" or "N". But when I run the same code with WLS81, it comes back as "true" or "false".
          Looking at the property right before it returns always shows the correct value. When I look into the parameters and values, they seem to match the above statements as well (Y,N,true,false).
          Here is an interesting twist though. If I switch the JDK to 1.4 on WLS7, it also changes to "true" and "false". I have tried both sun and jrockit jvms to no avail.
          Has anyone seen this behavior?
          Thanks,
          Ashar

That's almost what I said but not quite, you should not have any trouble, but this is the real world hence my suggestion to backup properly first.
As for Yosemite I don't know the answer yet, I would expect it to be a no but we'll have to wait and see.

Similar Messages

  • Upgrade issues OBIEE 10g to 11g along with OBIA upgrade

    Hi,
    I have to upgrade OBIEE 10.1.3.4.1 to OBIEE 11.1.1.5 along with OBIA 7.9.6.1 to 7.9.6.5(Informatica 8.6.1 to 9.0.1) at my client location and I have very little knowledge on it. and want to know/have help documents for upgrade.
    And if anyone in the forums involved in upgrade please list the errors/issues occured during upgrade and after upgrade.
    1. OBIEE 10g to 11g upgrade issues??
    2. OBIA OBIA 7.9.6.1 to 7.9.6.5 upgrade issues along with 10g to 11g??
    3. Informatica 8.6.1 to 9.0.1 upgrade issues??
    4. DAC upgrade issues??
    any response for my questions is appreciated.
    Thanks
    Jay.
    Edited by: Jay on Apr 11, 2012 9:11 AM

    HI Jay,
    We cannot explained thread list here, If you get any errors plz post me,will try to help out.
    This is oracle document link - This document has given step by step with screen shots upgration for 10g to 11g ,Please refer the below link.
    http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm
    http://obieemanu.blogspot.in/2011/05/rpd-upgration-from-10g-to-11g.html
    http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10125/ua_command_line.htm#ASMAS149
    Award points it is useful.
    Thanks,
    satya

  • Report generation toolkit upgrade issues

    I have created multiple vi's in that utilize the previous report generation toolkits specifically using the Generate Report Get Data to Modify.vi and the Generate Report Set Modified Data.vi.  Obviously the report reference has now changed in 8.6's version of the report generation toolkit and these vi's do not exist in the 8.6 library anymore.  What vi's do I need to replace these functions with to make this code work.  Can anyone tell me what the work around is to solving this problem.  This is a picture of the code.
    BJD1613
    Lead Test Tools Development Engineer
    Philips Respironics
    Certified LV Architect / Instructor
    Attachments:
    code.JPG ‏92 KB

    Hi BJD1613,
    The Report Generation VIs on the LabVIEW Palettes mutate properly. However, you may run into upgrade issues if VIs distributed with LabVIEW, but not available in the Palettes are used in the code. Hence, I would caution against using them for the same reason.
    In this case, the specific references do exist in the report generation classes; however, since they are private, they cannot be accessed by VIs outside the respective classes. A temporary workaround for now is mentioned in the following KB 4OOCSJ4M Getting References in Report Generation Toolkit 1.1.3 with LabVIEW 8.6.  
    This was reported to R&D (CAR# 123064) for further investigation

  • EHP Upgrade Issue - Java Stack

    Hi,
    Our Source System at NW 7.0 SP13 and we are upgrading the system to EHP1 SP03.
    Upgrade failed at Downtime > DEPLOY_ONLINE_DEPL phase.
    Error log:
    Sep 9, 2009 10:11:51 PM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
    Sep 9, 2009 10:11:51 PM [Error]:             com.sap.sdt.jspm.unattended.RequestController.addContextInfo(RequestController.java:178) [Thread[main,5,main]]: Deployment of queue sapjup-queue completed with error
    JSPM version is 7.01.3.0.15. Current JSPM log directory is /usr/sap/XPD/JC00/j2ee/JSPM/log/log_2009_09_09_16_09_42.
    Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.createAndLogRapiException(SAPJupJSPMRapiAdapter.java:698) [Thread[main,5,main]]: The deployment of the queue failed.
    Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.deploy.SAPJupJSPMDeployer.deployList(SAPJupJSPMDeployer.java:68) [Thread[main,5,main]]: Could not execute deployment of stack file /usr/sap/trans/EPS/in/XPD.xml.
    Sep 9, 2009 10:11:51 PM [Error]:      com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.execute(PhaseTypeDeploymentManager.java:519) [Thread[main,5,main]]: Error while executing DeploymentManager phase with action deploySlot. Check the log files for the specified action.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase UPGRADE/DEPLOYMENT_BASED_UPGRADE/DEPLOY_ONLINE_DEPL has been completed.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2009/09/09 22:09:42.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2009/09/09 22:11:51.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:02:08.248.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
    I went through the following link , proceeded with option 2, But still getting same error.  
    Portal Upgrade Issue
    Please advise the resolution for the issue I have.
    Thanks in advance
    Regards
    Srinivas
    Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM
    Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM

    Issue resolved

  • Upgrade issues list needed

    Hi,
    We're currently on 4.6b and going to upgrade to ECC6 with unicode I'm trying to compile a list point taken care converting to unicode from ABAP technical point of view. Does anyone have such a list?
    Some points i shortlisted are :
    1) Use GUI_UPLOAD and GUI_DOWNLOAD rather than WS_UPLOAD and WS_DOWNLOAD.
    2) Structures or table headers that contain non-character data need to be identical when moving, comparing, selecting into, updating from, etc.
    3) OPEN DATASET filename IN TEXT MODE FOR INPUT ENCODING DEFAULT.
    I know there are others. Any help would be appreciated.
    aRs

    Check the below links
    http://www.sapfans.com/forums/viewtopic.php?t=268386&highlight=upgrade+issues
    http://www.sapfans.com/forums/viewtopic.php?t=263434&highlight=upgrade+issues
    http://www.sapfans.com/forums/viewtopic.php?t=261051&highlight=upgrade+issues
    http://www.sapfans.com/forums/viewtopic.php?t=253316&highlight=upgrade+issues

  • Errors in Forte 3.5 -Upgrade issue

    hello ,
    We are having a frequent disruption in the communication SO which has an
    externalConnection Class. Did anything change in 3.5? We did not have
    these errors in 3L!
    After these erros, we have a mutex locking problem which leaves our
    application hanging.
    Any help will be greatly appreciated!
    thanks
    suma
    Here is an Excerpt of the log file
    Task 9: extConn4030a808.Write: 194 bytes written to 10
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Error #: [501, 152]
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Thu May 24 09:16:29
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    "MerlinWindows_cl41", pid 23406 on node laxrc2 in environment laxrc2.
    INFORMATION: Error parameters for Set:0 Msg:0:
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Thu May 24 09:16:29
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    24-May-2001 09:16:47: VH.G.G..GUIT/GUI0/PLAXRC172.23.4.401/../..;PGYX;
    Task 9: extConn4030a808.Write: 233 bytes written to 10
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Error #: [501, 152]
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Thu May 24 09:16:47
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    "MerlinWindows_cl41", pid 23406 on node laxrc2 in environment laxrc2.
    INFORMATION: Error parameters for Set:0 Msg:0:
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Thu May 24 09:16:47
    regards,
    Suma Venkatesh

    -----Original Message-----
    From: Venkatesh, Suma
    Sent: Thursday, May 24, 2001 2:39 PM
    To: '[email protected]'
    Subject: Errors in Forte 3.5 -Upgrade issue
    hello ,
    We are having a frequent disruption in the communication SO which has an
    externalConnection Class. Did anything change in 3.5? We did not have
    these errors in 3L!
    After these erros, we have a mutex locking problem which leaves our
    application hanging.
    Any help will be greatly appreciated!
    thanks
    suma
    Here is an Excerpt of the log file
    Task 9: extConn4030a808.Write: 194 bytes written to 10
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Error #: [501, 152]
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Thu May 24 09:16:29
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    "MerlinWindows_cl41", pid 23406 on node laxrc2 in environment
    laxrc2.
    INFORMATION: Error parameters for Set:0 Msg:0:
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Thu May 24 09:16:29
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    24-May-2001 09:16:47: VH.G.G..GUIT/GUI0/PLAXRC172.23.4.401/../..;PGYX;
    Task 9: extConn4030a808.Write: 233 bytes written to 10
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Error #: [501, 152]
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Thu May 24 09:16:47
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    "MerlinWindows_cl41", pid 23406 on node laxrc2 in environment
    laxrc2.
    INFORMATION: Error parameters for Set:0 Msg:0:
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Thu May 24 09:16:47
    regards,
    Suma Venkatesh

  • R12 upgrade issue:Not able to login using forms:Please help****urgent

    We have recently upgraded our instance from 11.5.9 to 12.0.4 in Windows 2003 server.
    We are unable to login to forms after upgrade, however we are able access self service responsibilities without any issues.
    We are getting APP-FND-01496 when we access any forms responsibility. We have tried all possible metalink notes with no luck.
    Any help to resolve this issue will be appreciated.

    Duplicate thread ...
    R12 upgrade issue:Not able to login to forms**please help
    Re: R12 upgrade issue:Not able to login to forms**please help

  • ECC 6.0 EHP-4 upgrade Issue in phase MAIN SHDRUN/ALTNTAB FILL were negative

    Hi Basis Expert,
    while doing ECC 6.0 EHP-4 Upgrade in MAIN_SHDRUN/ALTNTAB_FILL phase we are getting the following issue please help us.
    Checks after phase MAIN_SHDRUN/ALTNTAB_FILL were negative!
    Last error code set: BATCH JOB RDDNT2MT FAILED: Error(s) found in the log(s), accumulated in "ALTNTFI.ELG".
    We check the shadow instance is up and we can log in to the system. Check ST22 and SM21 notice no error.
    Check the JOB RDDNT2MT (SM37) successfully running and all the job finish without any error.
    Hope anybody can share a bit your experience on this issue. we try search the note and  find the forum but no luck.
    Thanks

    Hi,
    > 2EETG011 "No shadow system""(environment parameter)""auth_shadow_upgrade"
    > 2EETG011 "No shadow system""DB-connect not against shadow tables !"
    >
    It looks from your log that shadow system is not able to connect to database. Please check your shadow system. Check below link as well:
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/ecc-6-upgrade-issue-in-phase-altntab_fill-1556272
    Thanks
    Sunny
    Edited by: Sunny Pahuja on Oct 15, 2010 1:27 PM

  • Upgrade issues list

    Hi All,
    I was wondering if anyone had a list of Upgrade issues (most likely, from ticketting system) to the 5.0 system.
    Thanks

    Hi mark,
    Can u please send me the  upgrade issue list to this email address
    [email protected]

  • IDSM-2 - upgrade issue - 5.x to 6.x

    Hello All,
    I have an issue upgrading the IDSM-2 module I'm playing with.
    It is currently running version 5.0(2).
    The thing is when I try to upgrade the image to the latest 6.x version using the .bin.gz file, I get the follwing error message :
    The filename IPS-IDSM2-K9-sys-1.1-a-6.1-2-E3.bin.gz is not a valid upgrade file type.
    Continue with upgrade? []:
    There is no image file that is not .bin.gz on the download section of the website. Only recovery images have the .pkg extension.
    Does anybody how to troubleshoot this simple(I guess) upgrade issue?
    Regards,
    Thibault.

    You are trying to "upgrade" using a "System Image" (-sys-) file instead of an Upgrade file.
    The upgrade file for the IDSM-2 is the standard upgrade file used across almost all IPS/IDS models:
    IPS-K9-6.1-2-E3.pkg
    It can be downloaded here:
    http://www.cisco.com/cgi-bin/tablebuild.pl/ips6

  • Frustrating Phone Upgrade issue

    We need help with phone upgrade issue we encounter when BestBuy associate process our upgrade. Associate is saying we are not eligible but we have not done any phone upgrade since Jan 2011. Our ATT mobile service was established with BB in 2009 and we only upgraded 2 phones in Jan 2011 thru BB. The only recent change in January 2013 was a change of responsibility between my spouse and me since my company has a better employer discount thru ATT. No change and per ATT, no contract and we should be able to upgrade in any retail store. But BB keeps telling us we have issue with ATT and can do our upgrade only with ATT Corporate Store. Our mobile account is a regular family plan account as originally established with BB and just like any BB customer, have employer's discount attached. I don't understand how BB system communicates with ATT system so it is hard for me to explain to ATT what "error message" BB associate is receiving. It has become so frustrating with BestBuy telling us to check with ATT and then for ATT to tell us that there is no issue at their end. We have been a loyal BB customer with all major appliances bought from them including protection plan. The least they can do is work with their ATT representative to figure out between themselves what the issue is. Here we are willing to give both companies our business with new phones and new contracts and no one can help us out.

    LTGee -
    I am very sorry to hear about this. I am going to send you a Private Message to collect some information from you to see if we can get to the bottom of this. To check your private messages, ensure you are logged into the forum and click on the envelope on the upper right hand side of the forum.
    Thanks!
    Jesus|Senior Social Media Specialist | Best Buy® Corporate
     Private Message

  • Urgent: WLS 8.1 upgrade to SP3

    Hi all,
    I want to upgrate a productive WLS 8.1 (not SP2) cluster environment to SP 3. There is no chance to upgrade the system over a direct connection to the internet..
    Where can I download the SP3 directly ? Any ideas, hints or links ?
    Any help would be appreciated !
    Thanks,
    Mike

    Please go to support.bea.com and download the appropriate upgrade installer for your OS. You need to be a registered user for this.
    -Vishwas

  • WLST and WLS 81. SP4 Issue

    A WLST script of mine that I have used to build domains since 8.1 SP1 no longer works with SP4. It appears that calls to shutdown( <servername>, force="true" ) immediately followed by startServer (to pick up config changes) are generating errors:
    Connecting to weblogic server instance running at t3://htx690.cce.cpqcorp.net:10
    510 as username admin ...
    <Apr 4, 2005 3:08:57 PM CDT> <Notice> <WebLogicServer> <BEA-000353> <Thread "ListenThread.Default" stopped listening on port 10510, ip address 16.110.73.1
    30>
    <Apr 4, 2005 3:08:57 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Apr 4, 2005 3:08:57 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to SHUTTING_DOWN>
    <Apr 4, 2005 3:08:57 PM CDT> <Alert> <WebLogicServer> <BEA-000218> <Servershutdown has been requested by <WLS Kernel>>
    <Apr 4, 2005 3:08:57 PM CDT> <Alert> <WebLogicServer> <BEA-000219> <The shutdown sequence has been initiated.>
    Traceback (innermost last):
    File "/opt/sasu/utils/domainBuilder/bin/sasu_init.py", line 56, in ?
    File "<string>", line 1, in ?
    File "/opt/sasu/utils/domainBuilder/bin/sasu_funcs.py", line 89, in configureD
    omain
    File "/opt/sasu/utils/domainBuilder/bin/sasu_funcs.py", line 38, in connectToA
    dmin
    File "<iostream>", line 64, in connect
    WLSTException: 'Error occured while performing connect : Unknown Error. Use dump
    Stack() to view the error stack trace'
    * I have now put in a 15 second sleep and this appears to be working. Is this a known issue with WLST and SP4? I notice with the 15 seconds sleep that is appears to properly drain stdout/err, something it does not do without the pause (though it was not required with < SP4).
    Here is it now working with 15 second pause:
    Disconnected from weblogic server: AdminServer
    Waiting 15 seconds for AdminServer to shut down...
    <Apr 4, 2005 3:45:25 PM CDT> <Notice> <WebLogicServer> <BEA-000353> <Thread "ListenThread.Default" stopped listening on port 10510, ip address 16.110.73.1
    30>
    <Apr 4, 2005 3:45:25 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Apr 4, 2005 3:45:25 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to SHUTTING_DOWN>
    <Apr 4, 2005 3:45:25 PM CDT> <Alert> <WebLogicServer> <BEA-000218> <Servershutdown has been requested by <WLS Kernel>>
    <Apr 4, 2005 3:45:25 PM CDT> <Alert> <WebLogicServer> <BEA-000219> <The shutdown sequence has been initiated.>
    Stopped draining child stderr
    Stopped draining child stdout
    Admin Server Name:AdminServer
    Domain Name:validateSP4
    Domain Directory:/opt/sasuapps/validateSP4/domain/validateSP4
    Starting weblogic server ...
    <Apr 4, 2005 3:45:43 PM CDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM Version 1.4.2 1.4.2.05-040917-
    18:54-PA_RISC2.0 PA2.0 (aCC_AP) from Hewlett-Packard Company>
    Message was edited by:
    dstoflet

    Hello Daryl,
    Not sure what to say, it does seem like the sp4 server is returning success even before it is completely shutdown.. :-(. The workaround you put in to wait for 15 seconds seems to be a right workaround.
    thanks,
    -satya

  • WLS 5.1 certificate issue: encrypted private key

    My organization has acquired some certificates for use with WLS. However, the private
    keys for these certs were inadvertently encrypted with a password. We have a mix
    of 5.1 and 6.1 servers. We got the keys working with our 6.1 servers, but 5.1
    is a little tougher. How can we use these keys with our 5.1 servers?

    I dont think 5.1 supports password encrypted private keys
    Jason Norman wrote:
    My organization has acquired some certificates for use with WLS. However, the private
    keys for these certs were inadvertently encrypted with a password. We have a mix
    of 5.1 and 6.1 servers. We got the keys working with our 6.1 servers, but 5.1
    is a little tougher. How can we use these keys with our 5.1 servers?

  • WLS 7.0 LDAP Issue

    I am trying to use Netscape LDAP server for authentication with WLS 7.0, but having
    some problems.
    Here are steps I took.
    -Configured and started the default server
    -Add IPlanet LDAP provider
    -Removed the default Authentication provider and identity assertion provider.
    On the LDAP side, I have a Administrators group and have system user in that group.
    Restarted the server, came up correctly with user/password of LDAP server, and I
    assumed that it authenticated to LDAP server.
    On the console, if I click on Users or Groups, I do not see any user and group, and
    no option to create a user and group.
    What could be wrong here?
    After sometime, with the same settings I restarted server, and can not get authentication,
    getting access denied error.
    Can anyone please help me?

    Did you find a solution for this problem?
    I have somthing very similar going on where I am currently working.
    Thanks!
    Andy.
    "Simple Guy" <[email protected]> wrote:
    >
    Hi,
    I've a setup with iplanet 6.x webserver using the wls 7.0 sp2 proxy plugin
    to
    route requests to the clustered app server instances (2 of them) that
    are in wls
    6.1 sp3.
    The issue is, I'm noticing that the session is not sticky and is getting
    routed
    onto the other app server instance. The error that I see in the wlproxy.log
    is
    as follows:
    *******Exception type [PROTOCOL_ERROR] raised
    at line 654 of URL.cpp
    Thu Nov 13 11:30:08 2003 failure on sendRequest() w/ recycled connection
    to Instance1:7001, numfailures=1
    Thu Nov 13 11:30:08 2003 Marking Instance1:7001 as bad
    Thu Nov 13 11:30:08 2003 got exception in sendRequest phase:
    PROTOCOL_ERROR [line 654 of URL.cpp]: unexpected EOF
    reading HTTP status at line 1010
    Thu Nov 13 11:30:08 2003 Failing over after sendRequest exception
    Thu Nov 13 11:30:08 2003 attempt #1 out of a max of 5
    Has anyone seen this issue? Can anyone explain why this issue is occuring.?
    Thanks.

Maybe you are looking for

  • ADF View Object query to use Oracle  LONG data type

    Hi, I'm using a view object that uses Oracle LONG data type.The following exception is thrown *"java.sql.SQLException: Stream has already been closed"* and it is not fetching the correct data. I have searched in many forums,they suggested to use LOB

  • Shot photos in camera raw and after editing and saving as jpeg photo becomes extremely grainy

    I click open in photoshop and choose my raw image from folder. I edit colors, clarity tones sharpness etc from the pop-up.Then click open image. It opens in photoshop. Photo looks great with no graininess. I save opened file as jpeg. I open jpeg file

  • Default timezone is wrong!

    On one computer in our development shop, java's notion of time is one hour behind. It seems that Java gets the wrong default timezone for that machine, and I can't for the life of me figure out why. All machines are running java 1.4.2_03 on WinXP SP1

  • Launch iview in new window: howto rename browser window name?

    Hi all, When I open an iview in a new window, I would like to set the visible window name to the name of the iview, instead of just "SAP Enterprise Portal 6.0". Any suggestions? I am working with a SAP Transaction iView (windows gui). Cheers, faB

  • Pop up window - Issue warning on possible duplicate

    Hi, Could somebody please help me with the following? I do not have any experience with Javascript, but think this is a fairly easy issue. We have an HR database, and I would like a user to get a pop-up window if there is already an employee in the s