JTree Problem again

Deat 7rst,
Sorry, I want to ask you about the same problem.
if I want to display a difference components from difference node in JTree, how the code I must use?
I already understand about the code that you give to me. But I still confuse if many nodes in JTree to perform difference panel with many components each of its. The components beside JTextField.
Thanks

I have used THE SEARCH BOX - can't find nothing about editable JList, there are only references for editable Trees and Tables.
Do anybody have concrete idea (the best would be some code), or should I reconcile myself with the JTable solution?

Similar Messages

  • The same problem again with HP Simple Pass fingerprint reader after upfrading from Firefox 4 to Firefox 5. I have already installed HPSimPlePass 7.0.74.0 to fix the problem after upgrading to Firefox 4.

    I have a HP Pavilion dv6 with a fingerprint reader. I had the same problem as many other people when upgrading to Firefox 4, : I couldn't use the HP Simple Pass to enter a website needing a username and password by just swiping my fingerprint. I fixed the problem by downloading the new HPSimPlePass 7.0.74.0. This fixed the problem and I was very happy. Since upgrading to Firefox 5 I have the same problem again, but I already have the new version of HP Simple Pass. How can this be fixed so that I can use this fingerprint scan feature again, or where can I download Firefox 4 again?

    ''FredMcD [[#answer-709783|said]]''
    <blockquote>
    The programers know of this and are working on it.
    </blockquote>

  • Audio Render Problems Again

    I'm having problem again rendering a one hour presentation. If I use Command/R, the dialog box indicates seven or more days. If I highlight the selection I get essentially the same estimated time.
    Command/R usually works, but not this time. Audio For Playback is checked.
    The DV timeline plays in Quick Time OK.
    I desperately need to get this video sent out! I even deleted preferences using the "Preference Manager" program.
    David

    All of my lecture video series are recorded in LP 16 bit audio. Each lecture is between 1 to 1.5 hr in length. I have successfully completed 10 of the 23.
    Each lecture is sent to iMovie HD and then the timeline.mov is placed into FCE. One other time the timeline audio would not render, so I converted it to DV via MPEG Stream Clip and placed it back into FCE. The lecture I'm having trouble with is #11.
    As mentioned, usually Command-R will do the trick in 10 minutes or so, not 6 to 10 days.
    David

  • Explorer problem again????

    I got explorer.exe problem again,which was solved previously  by creating new user account.I am free from problem for around 1 month and started again, and this time very frequently i am getting windows with message that
    "Windows Explorer has  stopped working".I am using windows 7 professional service pack 1.Please any body give permanent solution to this problem,Problem details are below
    Problem signature:
      Problem Event Name:    AutoVerifierV2
      Application Name:    explorer.exe
      Application Version:    6.1.7600.16450
      Application Timestamp:    4aeba271
      Fault Module Name:    verifier.dll
      Fault Module Version:    6.1.7600.16385
      Fault Module Timestamp:    4a5bdb2a
      Exception Code:    80000003
      Exception Offset:    0000c0de
      Status Code:    201
      OriginalBucketID:    0
      OS Version:    6.1.7600.2.0.0.256.48
      Locale ID:    1033
      Additional Information 1:    e903
      Additional Information 2:    e90395e1c160c582c0a3c5e6d36ee788
      Additional Information 3:    f03b
      Additional Information 4:    f03b4ab77c5a1d7b156e29c2436e59a6

    Hello,
    The TechNet Sandbox forum is designed for users to try out the new forums functionality. Please be respectful of others, and do not expect replies to questions asked here.
    Since your post is off-topic, I am moving it to the
    off topic forum.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • When i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

    when i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • Why am I having update problems again?

    When I started Muse today I received a message that there was a new update and did I want to install. I said yes and it proceeded, when complete I received this pop up message:
    Title,  Adobe AIR -  "Intial content could not be loaded for this application. Try re-installing or contacting the publisher for assistance".
    But you can't re-install because it shows it's already installed. This happen to me a month ago and I had to un-install Muse & reboot before I could re-install.
    Why is this happening? Is there a way I could open up Muse without going through a un-install again. This only happens with Muse updates which occur when starting Muse, other Adobe updates that take place through the Creative Cloud control panel are fine.
    I just tried again, same problem

    Help Again.
    My computer just doesn't like Muse & apparently CC programs. After all this time when starting Muse I have been ignoring the message to update because I'm afraid if I say yes I will have the above problem again. Today I got brave and said yes and Muse would not open again!
    So I returned to this site and used the link you gave me before to reinstall Muse, when it finished it told me that there was a newer version 7.4 available and would I like to install it and I said yes, and it seemed to work and opens fine.
    I also had a request to install the latest update of Creative Cloud so I said yes. Everything went fine. I got really brave and I noticed that there was a newer version of Muse CC 2014 and I installed it but now that CC and other CC programs tell me I need a sign in with my adobe ID to try a 30 trial, if I press the License This Software button it asks me for a Serial Number. Why can't I open CC programs without a serial number, I am a Creative Cloud member? I have 2 Icons on my desktop, Adobe Muse.exe which works and Adobe Muse CC that tells me I need a serial number.

  • My Iphone Has a Restart Problem Again and Again wot To do?

    MY Iphone Has a restart problem again and again wot to do please tell me

    Basics from the user guide are restart, reset, restore from backup, restore as new.  If you go through ALL of those steps and you still have issues, you need to get your phone checked out by Apple.

  • A dns problem again?

    I sent email to [email protected] but the engineer there said he did not receive it. Also, I did not receive the email he sent to me through his sun.com email. it sounds a dns problem again.
    I have changed our mx record to:
    @ IN MX junk.domain.com.
    before, it was:
    @ IN MX junk ==>would this cause dns problems?
    Here is the entry in the mail.log which seemed that sun has received my email successfully:
    09-Dec-2005 09:39:10.59 tcp_local D 2 [email protected] rfc822;[email protected] [email protected] dns;btmx1.sun.com (relay1.sun.com [IntraStore TurboSendmail] ESMTP Service ready) smtp;250 recipient <[email protected]> OK

    Your log shows that Sun did indeed receive your mail.
    Sun's mail infrastructure has been under DOS attack for some days. Sometimes that's caused delays of up to several hours for inbound mail to get to us.
    We also have had some virus infected systems pounding our servers. More delays.
    We do contract with an external company to scan for spam/virus scanning. Those folk historically have lost us some mails, too.
    Your MX record isn't likely to make any difference in you sending out mail, but in your ability to receive mails, yes.

  • Performance Problem Again

    Hi all,
    We are encountering performance problem again
    The batch process deletes 1M rows every night which took 30mins the usual.
    But last night (12AM) it took more that 2hrs and hangs.
    Does it help if I run gather_schena stats regularly when there is constant DELETE on the table?
    Please help me check our ASH, AWR, ADDM to resolve the issue.
    ADDM
    https://app.box.com/s/7o734e70aa2m2zg087hf
    ASH
    https://app.box.com/s/xadlxfk0r5y7jvtxfsz7
    AWR
    https://app.box.com/s/x8ordka2gcc6ibxatvld
    Thanks....
    zxy

    Hi ARM,
    ***What is the SGA_TARGET or MEMORY_TARGET that the database is running on?
    Our server has 8Gb Physical Memory and 8Gb Swap.
    What  is the ideal SGA_TARGET and MEMORY_TARGET shouldbe?
    Our current setting is:
    ========
    SQL> show parameter memory
    NAME                                 TYPE        VALUE
    hi_shared_memory_address             integer     0
    memory_max_target                        big integer 5936M
    memory_target                                big integer 5936M
    shared_memory_address                 integer     0
    SQL> show parameter sga_
    NAME                                 TYPE        VALUE
    sga_max_size                         big integer 5936M
    sga_target                               big integer 0
    Thanks

  • Post Moved BT Problems Again

    Post moved to infinity board http://community.bt.com/t5/BT-Infinity/BT-Problems-Again/td-p/544347
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    I was going to put it in the Infinity forum but as there were other similarish ones here, and that my problem is reagrding a connection issue (my modem gets Inifinity just fine), I thought thought the connection issues forum would be the correct place.
    Also as HH3 is not Infinity specific, I thought the problem was not necessarily Inifinity specific either
    Even so, thanks for putting in the correct place.

  • Problem again with flickering and no firmware update

    I've got the problem again....
    I think I'll leave Imac world ....

    I had the flickering problem with my new iMac, it was resolved with the new software update to 10.4.6.

  • Network and Sharing Centre problems (again)

    I seem to be tearing my hair out once again with the Network List Service. Several months back the Network and Sharing centre stopped displaying or reporting the active networks, although I was connected with internet access. A consequence was most of the
    Metro apps would not work as they thought the computer was off-line.
    The problem seemed to be that the permissions were wrong in the Network List hierarchy and adding Full Control for my user account in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
    NT\CurrentVersion\NetworkList' seemed to solve the problem.
    Once again thought the Metro apps are not working reporting no internet connection and the Network and Sharing centre has the following message:
    Unknown
    The service to detect this status is disabled
    More Information
    When I select More Information I get a dialog asking if I want to turn on Network List Service,  when I click "Turn this on' nothing happens. 
    Having looked in the Event Viewer, there are a large number of this entry, maybe it is related?
        DCOM got error "1068" attempting to start the service netprofm with arguments "Unavailable" in order to run the server:
    Network List Service is reported as running in Services.msc. and task  manager.
    I tried to check the permissions in the registry key as I did before but key was missing (i think). I tried switching to a local account on the computer from my Microsoft Live account but no change, although when I checked the registry, the NetworkList
    key was there and the permissions were correct. Maybe I was just looking in the wrong place but I was pretty sure it was missing...
    Not sure where to go next with this.. 

    Hi,
    The Network and Sharing centre opens as normal but where you would normally see 
    'View your active networks' followed by the network or list of networks that you are connected to it just says:
    Unknown (when view your active networks would be)
    The service to detect this status is disabled
    More Information
    Clicking on 'More information' informs me that the Network List Service is not running and asks if I want to start it, clicking yes does nothing. The Network list Service is listed as running in Service.msc
    I have tried a full virus scan and also ran a whole host of anti malware tools and the computer seems clean. I also tried sfc /scannow with no problems detected.
    I restored and old clonezilla backup I had and it is fine now but made a system backup before I did. This is the second time this has happened and I would like to find a solution so I will revert back to the drive image with the issue and post a screen shot. 

  • Query problem again

    Will I ever get this!
    I have a form template which runs fine (it registers a user
    of my discussino board):
    <h2>Register here to post comments to any forum on this
    site </h2>
    <form action="Education - Bulletin Board - Register -
    code.cfm" method="post">
    <p>
    <strong>Username: </strong>
    <input type="text" name="user" />
    </p>
    <p><br />
    <strong>Password: </strong>
    <input type="password" name="pass" />
    </p>
    <p><br />
    <strong>Your mother's maiden name (a security
    precaution if you forget your username/password and need to
    retrieve them): </strong>
    <input type="text" name="MaidenName" />
    </p>
    <p><br />
    <strong>Email address (optional - in case I need to
    contact you about your posts): </strong>
    <input type="text" name="email" />
    </p>
    <p><br />
    <p>
    <input type="submit" value="Register!" />
    <input type="button" value="Back"
    onClick="self.location='index.cfm';" />
    </p>
    </form>
    </body>
    Now I want to check if the username and password have been
    taken by a previous user so I use this code:
    <cfif NOT structIsEmpty(form)>
    <cfquery name="CheckUserName" datasource= "Education
    Forum">
    SELECT UserName, Count(UserName) as Duplicates
    FROM ForumUsers
    WHERE ForumUsers.UserName=#form.user#
    GROUPBY ForumUsers.UserName
    </cfquery>
    <cfquery name="CheckPassword" datasource= "Education
    Forum">
    SELECT PassWord, Count(PassWord) as Duplicates
    FROM ForumUsers
    WHERE ForumUsers.Password=#form.PassWord#
    GROUPBY Password
    </cfquery>
    I just count how many times the password has been used. If it
    has been used more than once I'll later ask the new user to enter a
    different password. Unfortunately, Coldfusion has a problem with
    this query. Specifically, it gives me the error:
    Access Driver] Syntax error (missing operator) in query
    expression 'ForumUsers.UserName=jimmy GROUPBY ForumUsers.UserName'.
    The Error Occurred in C:\CFusionMX\wwwroot\Education\Bulletin
    Board\Education - Bulletin Board - Register - code.cfm: line 7
    5 : WHERE ForumUsers.UserName=#form.user#
    6 : GROUPBY ForumUsers.UserName
    7 : </cfquery>
    8 : <cfquery name="CheckPassword" datasource= "Education
    Forum">
    9 : SELECT PassWord, Count(PassWord) as Duplicates
    SQL SELECT UserName, Count(UserName) as Duplicates FROM
    ForumUsers WHERE ForumUsers.UserName=jimmy GROUPBY
    ForumUsers.UserName
    DATASOURCE Education Forum
    VENDORERRORCODE -3100
    SQLSTATE 42000
    I've run into this before, but I don't seem to be able to
    grasp the general principle involved.
    I'd be very grateful if someone could explain the error in
    this particular case and how I can avoid the problem in the futre.
    Thanks, once again, very much in advance.

    Thanks for the suggestions. I've changed the code to
    incorporate the advice as far as I can. It now reads:
    <cfif NOT structIsEmpty(form)>
    <cfparam name = "form.user" default = 0>
    <cfparam name = "form.password" default = 0>
    <cfparam name = "form.Email" default = 0>
    <cfparam name = "form.MaidenName" default = 0>
    <cfquery name="CheckUserName" datasource= "Education
    Forum">
    SELECT Uname, Count(Uname) as Duplicates
    FROM ForumUsers
    WHERE ForumUsers.Uname='#form.user#'
    GROUPBY ForumUsers.Uname
    </cfquery>
    <cfquery name="CheckPassword" datasource= "Education
    Forum">
    SELECT Pword, Count(Pword) as Duplicates
    FROM ForumUsers
    WHERE ForumUsers.Pword="AK"
    GROUPBY Pword
    </cfquery>
    Unfortunately, it still fails giving me the same error:
    Access Driver] Syntax error (missing operator) in query
    expression 'ForumUsers.Uname='adk' GROUPBY ForumUsers.Uname'.
    The Error Occurred in C:\CFusionMX\wwwroot\Education\Bulletin
    Board\Education - Bulletin Board - Register - code.cfm: line 11
    9 : WHERE ForumUsers.Uname='#form.user#'
    10 : GROUPBY ForumUsers.Uname
    11 : </cfquery>
    12 : <cfquery name="CheckPassword" datasource= "Education
    Forum">
    13 : SELECT Pword, Count(Pword) as Duplicates
    SQL SELECT Uname, Count(Uname) as Duplicates FROM ForumUsers
    WHERE ForumUsers.Uname='adk' GROUPBY ForumUsers.Uname
    DATASOURCE Education Forum
    VENDORERRORCODE -3100
    SQLSTATE 42000
    I think its just a SQL error as I get the same failure
    message if I replace '#form.user#' with say 'GAK'.
    Any further suggestions would be greatly appreciated.
    P.S. I'm still a novice, so how would I use
    <cfqueryparam> tags here?

  • I can't select my phone number for iMessage (-sigh- Yeah, this problem again)

    Let me explain the whole scenario:
    My iMessage and FaceTime worked perfectly fine this morning.
    I turned off my iMessage to check if I would be able to get messages from other iPhones.
    My observation is that when an iPhone has their iMessage turned off and someone else who sends an imessage to that phone, their message would automatically turn to "text" messages instead of imessages. (Whoa, that sounds a bit confusing).
    Anyway, I turned my iMessage back on and what do you know, I can't click my phone number because it's grey
    I'm only able to select my emails. So for "send and recieve" it says "No address" (Because i didn't select anything, I'm waiting for my phone number to 'magically' get selected)
    I have tried so many things and it's irritating.
    My Facetime worked well, I would turn it off and back on and my number would get selected instantly. And I messed around with it, turning it off and back on to see if it'll automatically choose my number and it did. But I turned it off and on again and now It doesn't choose anything, it just says "Waiting for Activation"
    But now after so many attempts of trying to turn it off and back on just to fix this iMessage crap, I can't even sign in to my apple id anymore. It says that I can't sign in and that I need to check my network connection. (I'm using wi-fi. And it's working perfectly fine; My network connection is fine)
    So now, I'm really screwed. my iMessage and Facetime don't work anymore.
    I'm really looking for a solution to this annoying problem.
    By the way, it's an iPhone 4s and my carrier is T-Mobile.

    I had the same issue. I cannot tell you why it happend although it may be tied to me changing my Apple ID passowrd.
    Regardless, this was the solution for me:
    Go to "Settings" on your device (I used my iPhone 5s).
    Scroll down and select "Messages".
    Select "Send & Receive".
    Touch your "Apple ID: [email protected]" (top line in blue text).
    Touch "Sign Out".
    From the Messages window turn iMessage back on and sign back into your Apple ID account.
    Your phone number should now be selected by default. Select the email addresses you also want assoaciated with your iMessages account and click "Next". It will verify your info and your DONE!

  • Install new apps in my iphone 5 since I update my iOS to 8.0.2. I already restore my settings and then it works but after 2 days i have this problem again. What to do? Please help

    I Am currently having trouble with my iphone 5. After I update my iOs to 8.0.2 i can't update and install new apps on my phone it always on a "waiting mode". I already restore the setting and its works but after two days problem happened again. Pls help

    Choose System Preferences from the Apple Menu.
    Choose Software Update from the View menu.
    Click Update Now.
    Select the items you want to install, then click Install.
    Enter an Admin user name and password.
    After the update is complete, restart the computer if necessary.

Maybe you are looking for