JTree - setSelectionPath not the same as mouse click

I have a JTree. Selecting a node on it with a mouse displays a panel in a neighbouring area. However, I also need to select a node programatically. I have tried using JTree.setSelectedPath(), JTree.getSelectionModel().setSelectionPath() and a few variations thereof. All these methods highlight the node but do not bring up the panel alongside. The widgets are in a framework, so I am limited in changing that.
Why is a mouse click different from a set selection path? The keyboard works fine too if I navigate using the arrow keys and then press Enter. Strangely, clicking anywhere within the JTree after selecting the node programatically also works. I am using JDK 1.3.

Hi DB,
Try restoring the connection (right click on the source system - restore).
Hope this helps.
Regards,
Diego

Similar Messages

Safari logs me out of logged in web pages - not the same problem as other similar post - please read.

Before you crucify me please read the problem I've outlined below, because it's not the same issue other people are having. I did research the forums for the particular issue I'm having and it's not the same as what's already been posted. Please let me explain.
Here is my machine info.
iMac running Mac OS X Lion 10.7.5 on 2.5 GHZ Intel core.
Safari Version 5.1.7
I run two instances of Safari. I will have 1 safari browser window open on the left side of my screen with 7 tabs all on pages that require login. I run a second instance of Safari on the right side of my screen with only one tab open logged into 1 web page.
Here's what happens. Ocassionaly when switching the focus from one browser to the other all of my logged in web pages will refresh and I'll be logged out of all my logged in web pages, on both open browsers. There's never a certain amount of time that this happens, I've had it happen 3-4 hours into my work day and I've had it happen 10 minutes into my work day. I've also had this occure when I'm putting the focus from one browser window to the other and then I go to resize the width of the window I just put the focus on.
I'm thinking that there must be some setting or short cut "gesture" built into Safari that I'm triggering to make this happen, however I have looked at all the settings and can't seem to find anything that would cause this.
Any help or advice is apprecaited.

BDAqua - I have two Safari windows open - I guess in my semi technical mind that equated to two instances. But your probably right, just one instance of app with two windows open.
About two minutes after I posted my question, I was doing some work in one of my tabbed web pages, as I pressed the submit button to update the record on that page and as the page was refreshing I clicked my mouse on the second open Safari window to put the focus on that window, as soon as I put the focus on the second open browser I got logged out of all my logged in tabs in both windows.
The time it happened was sometime between 14:30 and 14:35
I'm looking at the Sytem Log. IN the filter I typed Safari and nothing came up from today in the log.
Just looking at "All Messages" between the hours of 1430 and 1435 their are no messages about safari, just the following.
1/10/13 2:32:22.000 PM kernel: IOSurface: buffer allocation size is zero
1/10/13 2:32:25.000 PM kernel: IOSurface: buffer allocation size is zero
1/10/13 2:32:25.000 PM kernel: IOSurface: buffer allocation size is zero

My UI is not the same as that shown in the Mozilla website..why? (i.e home button still on left hand side of screen and no bookmark icon)

I was using FF 4 Beta and applied the update ... I noticed that my final version was not the same as shown on the website so I removed the beta setup file and took off all versions of FF cleaned adn restarted my laptop and then reinstalled a clean version of FF 4.. however my final* version is not the same as shown still. Is this right or do I need to do something else :(
Examples of what is different is the home icon remains on the left hand side of the screen next to the back button and I do not have the bookmarks icons which from the website should appear on the right hand side next to the new location of the home button.

Look you can customize it very easily.
Press Alt+V to have the View Menu -> Select Toolbars -> Click on Customize -> Now drag the Home Button to anywhere on the toolbar and pick the Bookmarks Button from the available icons and put it in the toolbar.

HT204053 Seems my iCloud password is not the same as my iTunes. Where do I go to reset my iCloud password? I cannot access anything when prompted to put in my iCloud password because I do NOT KNOW it. Thanks!

Seems my iCloud password is not the same as my iTunes. Where do I go to reset my iCloud password? I cannot access anything when prompted to put in my iCloud password because I do NOT know it. Thanks! I've used my iTunes password for everything else Apple does and would like to use the same one for my iCloud.

Do the following:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

I plugged in my iphone 4 for the first time to my computer to back everything up. but when i got to the screen to click on "new phone" or restore to the "same phone" i clicked "same phone by accident. now i have all of my old stuff from my G3s on my new

i plugged in my iphone 4 for the first time to my computer to back everything up. but when i got to the screen to click on "new phone" or restore to the "same phone" i clicked "same phone by accident. now i have all of my old information from my G3s on my new iphone 4. how can i reverse this? please help.

Hi, raneth's boyfriend!
Unfortunately, iTunes was told to restore all data from an old backup onto the new phone, and that cannot be undone.
However, prior to this, iTunes 10 would have also asked to make a backup of the phone before doing the restore. If the user elects to say "yes" to perform the backup, then iTunes would have backed up the phone before erasing it.
Hopefully, that backup will still be available in iTunes, and if so, it would be backed up under the new phone's name prior to it being erased and restored (if the name of the new phone is different to the name of the old phone).
To check if iTunes has a backup of the phone prior to the restore, look in the Devices category in iTunes Preferences. All backups made are timestamped and are identified with the iPhone's name at the time of the backup. Look for:
• a backup of the phone using the new phone's name prior to the erase and restore, or
• a backup with the same date and time as that when the phone was erased and restored (not the date and time AFTER when the phone was erased and restored!). This may be the case if the new and old phones have the same name.
If a backup is available, you can erase and restore again using that backup. The phone will be restored with what would hopefully be the original image of the new phone.
If no backup was made prior to erasing and restoring the phone initially, then there is no way to
undo it, meaning your phone's original data has been lost.
--tonza

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every time.

Safari (3.0.4) on Mac OS 10.4.11 has started quitting when viewing news and weather sites - not all sites, not the same sites every day. Help?

Hi Gary...
I see you are running v10.4.11 and you have updated Safari but make certain all the system software is up to date by clicking your Apple menu / Software Update.
If everything is up to date, try resetting Safari from the menu bar.
Select the top 7 buttons, click Reset.
Restart your Mac. Launch Safari. Try several of the sites you mentioned.
has started quitting
If resetting didn't help, post a crash report.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

The song palying and the album are not the same.

When I'm playing my music on my iphine, the song and the album are not the same. Sometimes they are not even close to the same thing.

hi
You have to click on the song with the right click (or Option Click) and click on get information,
in that menu you can define the order in the album

Print output not the same

Hello.
I have a puzzle that I cannot seem to find a solution for.
When trying to print a PDF, one output is not the same as the other; let me explain.
- Open PDF > File > Print > Make sure "Fit to page" is selected > Print = Printout looking good.
However...
- Highlight PDF > Right click > Print = Document is not shrinked to fit, and I lose part of my PDF.
Is there a fix for this?
Using either Acrobat Standard 8 (to the latest update) or Adobe Reader 9 (to the latest update).
Thanks for any input, advice.

Ok, I can see from my first post that the question is not clear.
There are 2 ways to print a PDF document.
Option 1
Opening the PDF, going to File > Print or clicking on the Printer icon.
From there you get the print dialog and you select printer, properties, etc, etc, etc...
This one works fine.
Option 2
By going to the folder where the PDF is stored, right-clicking on the PDF and selecting print (without opening it). This one does give me the printout with the missing margins.
I've looked at the printer settings and printing preferences (from Printers and Faxes), there is no options that I could see to say to always make the document fit. Is there such a setting from inside Acrobat's preferences?
Hope this clarification makes my problem clearer to understand.

Outlook-2 different entries for the same person (but not the same email)

i was asked to switch from outlook 2007 to outlook 2013 as a trial.
For some reason, I get two different entries for the same person (but not the same email), one which is the name as normal and one where the name has ' around it. In the below example:
I have 24 emails sent to Ciaran and then a further 14 sent to 'Ciaran'
The email address for both is exactly the same and it does not seem to matter if I create a new email or reply to an incoming one.
I switched back to Outlook 2007 and the issue is still the same.
any suggestions?

I would say that there is no way to prevent Outlook from doing it, it dependents on how the sender formatted the sending address, not the recipient who replies.
To fix this:
Open the message and double click the address and view source
Just replace the generated Display As with the Display As you want
Thanks,
Ethan Hua CHN
TechNet Community Support

Log-on client 200 is not the same as BI clients "600"

Hi Experts,
My data load got failed and when i checked the error message, it says " Log-on client 200 is not the same as BI clients "600"".
Diagnosis
You are using client-dependent BI functions in client 200. However, the standard BI client is 600.
System Response
The function is terminated.
Procedure
Maintain a destination in the BI standard client. For information, see SAP Note 522569.
I went through the sap note and checked the maintenance of rfc desination. But not able to uderstand this issue. Do anyone have good idea about this issue.
Thanks in advance.
Anand

Hi,
In BW, you must work on only client. As the error said, you log on to client 200, but using 600 client as the connected one. Please check the source system conncection whether it is given for the default client in RSADMINA table BWMANDT field or not. if not change that.

Line item Ship-to Info is not the same in Header Ship-to Party During Sales Order Creation via IDOC

We have observed that during creation of sales order using idoc, the line item ship-to party is not the same with header ship-to. The ship-to party info in line item is equivalent to the header's sold to party. To give you a quick background, Sold to party info is given in idoc and ship to party is being determined using table EDPAR. In this specific scenario, sold to customer is not the same with ship to customer.
Initial checking on the code leads us in function module VIEW_KUAGV. This FM populates partner details of sales order header and line item in program LVEDAF1Z
Below is the code for Sales order Header. Notice that WE_INPUT parameter which contains Ship to party is passed as exporting parameter in FM VIEW_KUAGV. This is the reason why Ship to Party is populated correctly in sales order header but not in sales order item.
Initially, it first set to Sold-To Party. However, if WE_INPUT is given or provided, partner details is set to Ship-To Party.
Please advise on how we can make the ship to party info in header and line item be consistent. This is SAP Standard program which why we are hesitant to make change on the program. If there is a configuration to make this happen, kindly advise.
Regards,
Rommel

Hi Jayesh,
If I understand you correctly, you want that when creating SO from Quoatation
the Ship to Party also follow/copy Ship to Party from Quotation, right?
Just to confirm with you, when you creating SO reference from Quotation, you
use copy/follow-up function, am I right?
You can do this by setting in configuration of Copy Control (like mentioned by Hui).
Step as follow :
1. Go to IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions
2. Create your BAdi (Business Add-In for Copying Control), such as get Ship to
    Party value from source document and use it in current document
3. Use this Rule you have created in BAdi (no. 2), in copy control transaction type
    IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions-> Define Copying Control for Transaction Types
4. Here you set Copying Routine for your transaction types (put name of your Badi
    created in step no. 2)
Or alternatively, you can set it on access sequence in Partner Function
Ship to Party in configuration. You can define access sequence the Ship
to Party is taken from Preceeding Document -> Ship To Party
1. Go to Partner Function access sequence :
    IMG->CRM->Basic Functions->Partner Processing->Define Access Sequence
2. Create new access sequence with following entry :
    - Source COM_PARTNER_A (PrecedingPartner)
    - Check Mapping for Partner Being search
    - Partner Function in Source = Ship To Party
3. Assign this Access Sequence in you Partner Function used in Sales Order Transaction
   Type.
Tell me if this is what you looking for
Gun.

With iTunes match, order of the songs in my playlist of mobile devices is not the same as on my computer

In my iTunes on computer, I have several smart play lists. Within each playlist, songs are set to a certain order. Some playlist songs order are organized by name, some playlists are organized by Album, some playlists are organized by artist etc.
When I was syncing my iPhone and iPad directly with my computer, the playlists on my mobile device had same order of songs as on my itunes in computer.
Now, I signed up for iTunes match. With iCloud sync, order of the songs in my playlist of mobile devices is not the same as on my computer. In fact, order of songs within a playlist appears to be completely random. Moreover, order of songs are different in my iPhone 4s and iPad 2
How can I change the order of songs on my mobile devices or how do I make iTunes match to sync my songs such that within a playlist, my songs are in the same order as that of iTunes on my computer.

Thanks mracole. I assume this means order of songs will work with regular play lists I iTunes match. Will try it this afternoon and report.
Please let me know if my understanding is not correct.
Best regards and thanks once again.

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.

HT5312 how do i reset my admin password, my apple iD password is NOT the same as my admin login password

all ive been seeing is that i can reset my password with my apple iD, but its not the same. and it doesnt do the command R thing or the terminal/utilities thing. so what do i do??

Phil,
First of all, to log in as the HTML DB administrator, you want to use a different page, one that ends in /pls/htmldb/htmldb_admin Try logging in there. If that doesn't work, see this thread about creating a new admin account:
stupid password tricks
Sergio

My iPhone serial number and IMEI is not the same as Apple server

Hello,
My problem started when I want to unlock my iphone 3gs via Imei.
My old iphone broke about a month after i bought it (it was 2 years ago), so i sent it to Movistar to change it (i think that they sent it to appleCare). Now Movistar told me that i have to send the old iphone imei in order to unlock the iphone i have now, i ask apple for the repair order receipt, then i received an email and i could see the information about the 2 iphones: the old broken one and the new one.
Then I realized that the iphone they sent me as a replacement (the new one) is not the same iphone i have. The serial number and the Imei are different, so, should apple change this data in their server in order to unlock my iphone or what can i do to solve it?
There is any formal way to perform this data change?
Thank you in advance,
Francisco Marzabal

Here we work with repairs for devices that does not have waranty (expired or other issue). In this case, I did the screen replacement. No other ipad was on my station, the ipad arrives, i took it change the glass, put everithing back, give to customer. Thats it. The job was done by me, the customer test his ipad in front on me, works fine, everything ok. Few days pass and he came back saying that it wasn't his ipad, he brings the box that the ipad came and ask me why the serial number does not match the serial number in the box (sorry NOT in the back of the ipad).
There were no other part changed only glass. After 7 years working on this, thats the first customer complaining about a work done here. After this I was curious and look for more information and some forums, also one port here is claiming that the serial number on the device is not the same as the box where it came.
I just want to make sure that there are possibilities that there could be such mistake during the packaging process.
Thanks for the replies

JTree - setSelectionPath not the same as mouse click

Similar Messages

Maybe you are looking for