Jump Backwards Problem...

I have 5 Tracks each with 4 chapter markers
When you press Start, the whole things goes with storys and shows up like a seamless film. The start button is linked to the story of the first track end at the end it jumps to the story of the next track via script with a jump command.
So far...so fine it works. When i skip forward it proceeds throug the storys.
The problem is, when i want to jump backwards. That only applys within the story, so when i am in the 3th story and press backwards it goes only to the begin of the story but not to the story before (2nd).
somebody got an idea how to solve this? can it be done with storys? or is there some other way to skip backwards?

this is standard. like when you skip forward on an audio CD, you go to the next track. When you skip back, you go to the beginning of the same track. This is because the start of the track you are on is the first marker seen when shuttling backwards. Since you know scripting, you just need to make one for jumping back 2 spots.

Similar Messages

  • Reinstalling Lion Progress Bar Jumps Backwards

    Anyone have this problem?  I'm reinstalling Lion, and I get to "less than a minute," then all of a sudden the progress bar jumps backwards to "21 minutes left!" WTH????

    The first part is downloading what will be installed. The second part is the actual installation.

  • Premier pro cc playback is jumping backward

    Since I've upgraded from Premier Pro CS6 to CC, the playback head keeps on jumping backwards in playback mode. In the event page I get the following message: "Audio Dropout Detected at: and the list goes on for ever of the same message at different timecode interval.  What can I do to resolve this?

    hi
    look at this
    I have the same problem
    https://forums.adobe.com/thread/1504407
    You can post your computer specs?
    It seems that not everyone is complaining about it

  • Swipe backwards problem

    I seem to have a Swipe backward problem with Safari 6.0.2
    When Im browsing and wants to go back to a previous page and use the two finger backward swipe, it almost everytime take 1-3 seconds to reload the previous page, and often it takes longer. Sometimes I just get a white page, and nothing happends before I press the update button.
    I have tried to swipe pack several times when it freezes up, but it won´t still nothing. The funny thing though is that if I use the original back button, Safari go back to the previous page instantly, and I never get the white pages.
    I just can´t figure out whats wrong, or if it´s me who have misses something in the settings.
    Anyone with the same problem?

    Have the same issue and it is very annoying. Any news about possible workaround?

  • Cursor randomly jumps backwards when typing sentence

    How can I find solution to the cursor randomly jumping backwards when typing a sentence... I end up with my name is Chris and I haven typing a sentence this trouble whe
    == This happened ==
    A few times a week

    Is this happening on specific sites or totally at random?
    Also you might want to check your keyboard - may sound a bit silly, but I tried that myself on a friends laptop and we found a tiny bit of metal under the left arrow key.

  • Jumping pages problem in IE

    Here's the link: http://www.barristercopy.com
    I have two of my pages that are deeper with content than the others, Case Studies and Management Team. These are the two pages that seemingly jump slightly when viewed with IE. No problem in FF.
    Generally to fix the problem I add this code to the top of the style sheet:         html, :root { overflow-y:scroll; }
    This time, it doesn't seem to work. Any suggestions?

    Unable to replicate in IE6
    You have a consistent vertical scrollbar and a consistent horizontal scrollbar only in a narrow viewport
    Please elaborate on "jump"

  • Dynamic Jump Menu Problem in CS3

    I'm trying to create a link in a Jump Menu to a Detail Page.php by setting the parameters in the menu item to match a value in a recordset. When selected from the menu, a new page should open with a subset of the original php page. So far I haven't found a method to transfer a value in the menu to a url parameter which can be used by the target php page. Any suggestions appreciated.
    Regards to the List

    Nevermind. I was over-thinking the problem and adding dynamic parameters, when a simple solution was all that was required.
    Regards to the list.

  • Jump / Skipping Problem

    I wonder if anyone could help me. I have a 4GB Nano which I purchased about 18 months ago. Everything has been fine until recently. Sometimes when I listen to a track, the iPod starts skipping/jumping. It doesn't skip tracks and it doesn't jump to the next track either. It simply jumps/skips within the track that is playing at the time. The tracks will start to play and then suddenly it will jump to a random point in the song. The jumping/skippig continues until I press stop or until I skip to the next track. Has anyone else experienced this before and what should I do? Should I reset/restore the iPod?
    Many thanks.

    Hey my ipod Nano is doing almost the same thing. I also have a 4gb that is also skipping but it skips numerous songs all at once, and doen't even play the selection at all. It will just keep skipping till it does play a song..... I Konw how you feel.. I hope we can get this problem fixed. Just to let ya know I have tried to restar my nano but it still doesn't work for me.. If you need to know how to reset ur ipod:
    1. slide the Hold switch to HOLD and then back to OFF HOld
    2. Then Press the Menue & Center Button at the same time until the Apple Logo appers...
    I hope this was helpful in some way..If not I'm truly sorry. Good Luck.
    Message was edited by: Ladyduke13

  • Jumping Workset Problem

    Hi all,
    I have one role Role1 under which I have 4 worksets say Workset1, Workset2, Workset3, Workset4 displayed as tabs in same order. All the pages in all worksets show preview without any error.
    Now when I start the browser and click on the Workset3 it works fine. Now after this if I click on Workset2 or Workset4 and when I click again on the Workset3 it jumps to Workset1 i.e. the first workset in the role.
    Has anbody faced same problem before?
    Regards,
    Jaydeep

    Unable to replicate in IE6
    You have a consistent vertical scrollbar and a consistent horizontal scrollbar only in a narrow viewport
    Please elaborate on "jump"

  • K7N2 Delta-L Jumper J11 problems!

    Hi,
    i am having problems getting my 2800+ chip to run at speed.
    i have got the j11 jumper set to 133/166 fsb. When i take my J10 jumper off safe mode onto user mode 133MHz my computer will start, but the moniter satys blank and the computer just hangs there. When running on safe mode the processor runs at 2200+.
    i am fairly sure its not my PSU as i bought a new thermaltake silent 420W, which runs at:
    +5V  3.3V  12V
    40A  30A   18A
    which should be up to the job...
    Thanks for any help!!!!!!!!:P

    lol i win "spanner of the year" award, rember put cpu fan on the right way round...

  • 5.0 debugger more sophisticated (jump backwards)?

    A very nice feature of Visual Basic debugging is, that you can drag the pointer that point to the current line of code backwards (and forwards). This way you can re-execute some line of codes during debugging with changed (temporarily fixed variable values) code just by dragging the debug pointer with the mouse to another code location.
    I haven't seen this feature in a Java IDE, I guess this feature is not offered through the Java debugging API. As 5.0 introduces some improvements to this API I wonder if it also offers this "back stepping" in code?

    Adjusting the program counter/byte code index to an arbitrary
    location is a non-trivial problem because you must also preserve
    the integrity of the expression stack and the semantics of the
    runtime execution environment (type safety, verification, and
    so on...).
    I haven't seen this feature in a Java IDE, I guess
    this feature is not offered through the Java debugging
    API.The current JDI implementations offer PopFrame which
    pops frame(s) off the stack. So you can pop out of the leaf
    method back to the caller and then re-enter the method.
    As 5.0 introduces some improvements to this APIPopFrame was added in 1.4 and was not changed in 5.0
    (aside from bug fixes...)
    Here is a summary of the JPDA Enhancements in 5.0:
    http://java.sun.com/j2se/1.5.0/docs/guide/jpda/enhancements.html
    I wonder if it also offers this "back stepping" in code?This capability is the subject of Bug-ID 4059717
    Synopsis: "JPDA: Want to be able to set program counter in debugger"
    http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4059717

  • Jump menu problems in IE

    Hello,
    I am having trouble with the Dreamweaver Jump Menu. I have
    set up a basic page, used the Insert: Form: Jump Menu to navigate
    to different pages. It works fine in all browsers with or without
    the "Go" button, but it never works in IE 6 or 7. Is this a common
    issue with the Jump Menu? Is there some bit of code I need to add
    to make it work in IE? I can post my code in here if necessary;
    just thought I'd check to see if it was an easy fix first.
    Thanks for any advice.

    Your markup is screwed up. Compare yours with the following
    <ul id="MenuBar1" class="MenuBarHorizontal">
      <li><a href="index.html">Home</a></li>
      <li><a class="MenuBarItemSubmenu" href="#">About Us</a>
        <ul>
          <li><a href="about us.html">About Us</a>
          <li><a href="calendar.html">Calendar</a></li>
          <li><a href="bus ministry.html">Bus Ministry</a></li>
          <li><a href="subscribe.html">Newsletter</a></li>
        </ul>
      </li>
      <li><a href="directions.html">Directions</a>
      <li><a href="sermons.html">Sermons</a></li>
      <li><a href="contacts.html">Contacts</a></li>
      <li><a href="gallery.html">Gallery</a></li>
    </ul>
    Gramps

  • Jump Query problem

    Is there any way where I can come back to source query from my jump query ?
    E.g , I have executed one query and from there I jumped to detail level query . Now I want to come back the source query from the same screen .
    Let me know how to do this ?
    Regards

    Hi Maasum,
    If i have understood u r question properly............
    1)Just Right Click on the Screen and then  Cllick on the One Step Navigation Back
    It will take u to the previous Screen.
    Rgds
    SVU123

  • Pdf view : jumping back problem ?

    Hello. I've been having an issue lately where i view pdfs on Acrobat.com, and when i drag the sliders up, the page first jumps to its top, then slides normally from where it should be.
    Correct behaviour while dragging sliders to the bottom : pages flow one after the other smooth.
    Same thing is awaited the other way. But here, if i drag fast, my window will "blink" with a subliminal of the full page i'm reading...
    who can i contact to send this as a private file (document is not mine and can't share on an open forum, and i didn't find a bug form)

    Hello Franck,
    Thanks for posting. We're investigating the issue you report with the PDF viewer; we've seen something like this before, so I'm confident that we'll be able to find a fix for you. Could you tell us what browser and operating system you're using, we will reply with further instructions.
    Thank you for your patience!
    Rebecca

  • Jump menu problem

    I am a new user of Dreamweaver and setting up my first jump
    menu. I believe I have followed directions properly, but when I
    view my jump menu in the browser and try to have one of my list
    values transfer to the designated URL - nothing happens. I went
    into the Behaviors section and tried onclick to see if that would
    work - nothing. I then recreated the jump menu and tried the 'go'
    button. That didn't work either. Does anyone have any other
    suggestion? I am working on a PC with Windows XP.

    dianecope wrote:
    > <select name="Hockey-events"
    onclick="MM_jumpMenu('parent',this,1)">
    > <option value="Hockey-Event-H1.html"
    >
    selected="selected">12/13/06-Breakers-game-Event-H1</option>
    > <option
    >
    value="Hockey-Event-H2.html">12/17/06-Breakers-game-Event-H2</option>
    > </select>
    >
    <select name="HockeyEvents">
    <option value="Hockey-Event-H1.html" selected>
    12/13/06-Breakers-game-Event-H1</option>
    <option value="Hockey-Event-H2.html">
    12/17/06-Breakers-game-Event-H2</option>
    </select><input type="button"
    onclick= "location=
    this.form.HockeyEvents[this.form.HockeyEvents.selectedIndex].value"
    Note the change of select name.
    Mick

Maybe you are looking for

  • Is there a way to open page with a new Tabular Form row?

    Hi All, I have a (non-manual) Tabular Form that works great. My requirement is to have the new page to open with a new row already added. I tried      onLoad="onLoadProcess()";      <script language="JavaScript" type="text/javascript">      function

  • IPod Touch (2nd Gen) not charging properly and apps won't update

    Hi, I'm not really sure if or how these problems can be linked, but I thought I'd put them together just in case... My first problem is that my apps aren't updating properly.  When I try to apply the updates, I get the "waiting" come up but then it j

  • Mac OS X Lion (Late 2010) having Recovery screen freeze with spinnig wheel

    I have a Mac Air purchased in December 2010 with Snow Leopard. I upgraded the OS to Lion and now running 10.7.4 version. I recently tried to use 'Disk Utility' feature to 'Verify' the disk which asked me to repair through 'Recovery HD' which is done

  • Address book entries doubled on just one device

    I have 3 macs, an iPad and an iPhone and all the data is synchronized with iCloud.  However on one of the Macs the Address Book entries are doubled.  Would someone have any idea how I can resolve this issue ?

  • EBS: RFEBGB00 No line items found

    Hello All, When I try to post the Electronic Bank Statement in Great Britan into the system through RFEBGB00 (FF_5), the system is picking up the header the trailer data correctly. Whereas, the transaction data is not getting posted and it shows "No