Jump Query Assignment Problem

Hi all,
I have a problem with Jump query. I have Posting Date (variable of type range) in Source Query. Target Query has Invoice Date (variable of type range). Both Posting and Invoice dates variables are identical. In RSBBS setting in the assignment details I assigned Posting Date variable to Invoice date variable. When I try to jump from source to target it is still asking for the Invoice date. Tried different options in the RSBBS assignment but still no luck.
Any ideas as to how to send Posting Date variable values to Invoice date values.
Thanks,
Ram.

Bhanu,
Both posting date and Invoice date are part of selection screen entries in both the queries. I cannot remove it.

Similar Messages

RSBBS Jump Query -- Assignment Details

Hi , I went RSBBS Jump Query --> Assignment Details --> InfoObject is Company Code so I (select type "Variable") --> Field Name I tried both Info Object Name("0comp_code")and Variable of Infoobject "0comp_code" is "ZS_CC" Manual entry variable for choosing NYLP OR NYPLP So i tired putting that in Field Name --> Selection Type (E Single Value). But it did not work and reciever query still show me the both NYLP AND NYPLP COMPANY CODE. reason I think of is use of Structure Company code in Receiver query and not the same Variable ("0comp_code")ZS_CC which is used in Sender query. I cannot change the same beacuse of reconicillation issue between two report
Please let me know if I am doing any thing wrong or is there any other way to resolve this quick.
thanks
soniya

I didn't understand your question, i think you can do this way.
RSBBS Assign your Sender Query and receiver query. In Receiver query i think you have company code then create a variable and should be replacement path and specify the sender query In the next screen in the query option. Then you should be getting only those values for that company code. When u drill down. It should work, wait for others opnion.
Regards
Kunal

Jump Query (RRI) Problem: not showing particular record......

Hi
In BI, i have 2 queries and implementing Jump query so that after selecting 1 material from 1st query should give me details of that particular material in second query.
But in my case, i am getting details of all the materials and not the details of particular material from 1st material.
Might be i am doing some mistake at RSBBS level.
In RSBBS assigment level i am using:
InfoObject = Material
Type = InfoObject
Field Name = 0Material
Selection Type = Parameter (i tried everything here like single value, selection option)
could u pls. let me know how can i solve it.
Thanks....

Hi,
First Goto RSBBS and Give your query name that means which query is sender then in next tab give your infoprovider name
then click on create button it ask the receiver query give your send query. When your run the sender query select any row click on right click it shows your send query name click on that it's goto next query.
Thanks
Venkat.

Problem with jump query

Hello ,
iam having problem with jump query when i execute the web report but the same jump query is working fine in Bex analyzer.i think there are some settings need to be done in SAP WAS for web report. if it so can anybody tell me how to maintain these settings so that i can execute the my web report.
Regards
Komal

Hi Komal,
What is the problem you are facing while executing the report.
Are you working on WAD? Explain clearly about your problem you are facing.
Regards,
KK.

Problem of running the jump query from the result line

Dear expert,
I have a problem when running a jump query from the result line. Apparently, the values of the caracteristics haven't been sent to the jump target. However, the configuration in RSBBS seems to be good as the jump works well from the other lines.
Does anyone have some ideas on that?
Thanks in advance!

Hi,
If you are supposed to bring across characteristic values to your target, then you will not be able to jump from the result line. The configuration expects that the values of the characteristic marked as being used in the jump are filled with unique values. When you use the result line as a source for your jump, the values in the result line will most likely be based on the sum of multiple characteristic values.
Hth,
-Jacob

Jump Query problem

Is there any way where I can come back to source query from my jump query ?
E.g , I have executed one query and from there I jumped to detail level query . Now I want to come back the source query from the same screen .
Let me know how to do this ?
Regards

Hi Maasum,
If i have understood u r question properly............
1)Just Right Click on the Screen and then Cllick on the One Step Navigation Back
It will take u to the previous Screen.
Rgds
SVU123

Jump Query not working

Hello Gurus,
I have a problem with Jump query. When i open query in Bex Analyzer and when i right click and goto i can see two queries there. But when i click on any query it opens the complete list of queries to search for.
I checked against RSBBS when i feed the sender query name in Text box and enter i can see 2 receiver query below. which confirms me that it is configured corrrectly so why im not able to jump to receiver query please suggest me.
Any suggestions are highly appreciated with Points
Thanks
Mahesh

HI MAhesh,
Have u done this .....
This steps for RRI i.e report to Report Interface !!!!!!
T Code -RSBBS.
Report A-Jump to report B.
Report B-Is Employee Based
Assume u want call report B from Report A
1)GOTO RSBBS
2)Create New
3)Sender Query Give the First Query Report A
4)Below sender Query there is Receiver Query  give the RRI query report B (The query which u want to call).Report type should be BEX ,and Target system--Assign the System(Local) and in the report give the Report B.
5)In the Report A check whether in the GOTO -u get the Receiver Query ,i.e Report B
The Input Variable of Query No 1 will become as the Filter to the Query No 2 and That is the Default propoerty of RRI.
Hence in TCODE RSBBS ,in the Assignment TAB please set that Infoobject on which u have built the variable to DELETE mode instead of Generic and then try.
Pl let us know the settings for the assignments in the RSBBS .
Rgds
SVU
Edited by: svu123 on Jul 29, 2009 1:53 PM

BAdI SMOD_RSR00004 for Jump Query

Hi,
I have to create a jump query to an R/3 transaction. The I/O 'Object key' in the BW corresponds to the r/3 field OBJKY of the NAST table. After trying out all the possibilities/ assignments in RSBBS also its not working.
Can anybody pls guide me how to implement BADI for this jump query(RRI for Transaction).
Thanks in Advance,
Sandy.

Hi Sandy,
What is the problem you are experiencing exactly?
What I had to do was in the Assignment Details choose Type "3 Table Field" for the infoobject in the query you want to pass to the transaction then fill in the field name for the source table and the fields data element and domain values.
You will also need authorisation to transaction RSRR_WEB in the source for this to work.
Hope this helps.
Cheers
Craig

How to monitor the values transferred to the jump query in a debug mode?

Dear experts,
There is a problem in the interface of two qeuries. In the first query, the infoobject is defined as a global filter with a constant. I added this infoobject in the interface via RSBBS.
Nevertheless, if i run the jump query, the value in this InfoObject is not taken into account by the jump query.
Does anybody know whether there is a method to debug (monitor) the values tranferred to the jump query? For example, in the transaction RSRT or others.
Thanks in advance!

in RSRT- EXECUTE+DEBUG => breakpoint in RRI transpormations
also see the note 1053310
Regards, Ragz

RRI Jump Query opens the receiver query in standard Template??

Hi,
Few questions from me (Note I have searched the forum database for answers but didnt get a convincing answer)
1) How can I use 1 web custom built template for 2 different queries?
2) I have created the sender receiver setting for the Jump queries. The problem that I am facing is that the sender query uses the custom built web template but when I use GOTO the receiver query instead of using the custome template it executes in standard webtemplate. Kindly suggest how can I open the receiver query in the custom built web template after GOTO function.
Thanks for all your help in advance..
- Amit

Hi SS,
I agree to the statement that RRI uses link to Query but if we setup the custom web template for that jump query in WAD....it will never open in that template via RRI ???
That very disappointing discovery for me !!!
Any other possiblity to make this work????
What if I have the sender and receiver query web template(custom) same???.is it possbile to use the same template for these two template even after jump ???
Regards

Jump Query in Business Object ?

Hello friends,
I am currently working on a BEX report which has the Jump query feature ( using tcode RSBBS). There is a requirement now that all Bex queries must feed Business Object and we need to convert all the report in Crystal report or Webi Report.
The problem I have is :
Does Business Object support Jump Query ?
I tried searched many formuns but i found no answers in any of them. Please help me out with your ideas..........
Thanks,

Hello all,
I did some research yesterday and found out that there is some options in Business Object with which u can do Jump query:
Crystal report :
Using Sub-Report feature
Web Intelligence:
Using Hyper Link
Can any body please confirm whether this information is right. Any idea or suggestions are appreciated.
Thanks friends.......

Jump Query settings.

Hi All,
I have a problem with jump query.
I want to execute a query based on Equipment say for ex. A.
3 materials are displayed say for ex. M1, M2 and M3.
User wants to see other equipments for the above 3 materials M1, M2 and M3.
I have created another query for displaying equipments based on materials.
Now i want to jump from the first query to the second query.
But i want to display the equipments for the materials only in the first report.
In our case M1, M2 and M3.
Please some body suggest.

Hi Prem,
The receiver of a jump query is filtered with the variables and the filters from the sender query, not with the result values of the sender.
This explain the receiver reactions in your case:
1/ When you execute the Goto from the column material, the receiver is only filtered on the equipment value (A for example) and not with material values (M1, M2..) displayed in the sender query. So you have more materials in the receiver query than in the sender.
2/ But, when you execute the Goto from a material line, you filter the sender with a material value which is also used in the receiver query and you see only one material value.
I don't know automatic solution to filter a receiver with the result values from the sender, and I think no one is existing.
But "Yes, we can", do it like this:
execute the sender query, on the material characteristic used the option "Select filter value..." and select all your material values (M1, M2, M3...)
then execute the Goto and let me know if it work like you want
I hope it's helpfull
Regards

Jump Query

In my sender query(Sales Cube) I have variable as order creation date (I enter a range as 01/01/2006 to 01/10/2006) and do a jump to get the details of delivery dates (delivery Cube), now the issue is delivery can be as early as 01/01/2006 to current date, but in the report it filters to only 01/01/2006 to 01/10/2006. How to resolve? Urgent
Regards
Kunal

Hi Kunal,
I assume you are using RRI for the jump query.
In the screen named "Maintain Sender/Receiver Assignment", you can change the mapping of the filter to make it a one-sided (less than or equal to) filter.
Hope this helps.
- Pete

Jump Query asking for Sign on again in Portal

Hi All,
I have a jump query (target is a URL not a web template) and when we click on goto/xyz_report the system is asking login again. On other reports when the target is a web template the system follows the SSO (we have SSO on the portal and once you are in the portal you will not be asked for login again).
Any idea if the problem is because the target is an url or any other settings i have to watch for...
Please help.
Thanks and Best Regards,

so target is also a BW application (http://servername.companyname.com:7990/sap/bw/BEx?sap-lang"
) right?
you logged into system A, ran a webtemplate and jump target is another webquery/template in the same system, but its again throwing login window? - is my understanding right?
Can you confirm this
Regards
Raja

Selection Screen pop up issue - with jump query RRI

Hi Experts,
I am facing one issue regarding Jump Query(RRI) functionality.
I have one query and also one drill down query.
I need to jump from the first query to the drill down query.
To achieve this , I have added the first query as sender in RSBBS T-Code and added the drill down query as Receiver.
I have also done the variable assignment from the Assignment Details tab.
Now the Jump functionality is working.
But , whenever I am jumping to the receiver query , The selection screen pop up is appearing.
I don't want this selection screen to appear during jump.
Please help me in this regard.
Thanks,
Biswarup

Hi ,
For testing purpose , I have used a single query as sender as well as receiver query.
So , the characteristics set is same.
The query is a simple query, with only one input variable.
and I have assigned it, from variable assignment.
But still the selection screen pop up is coming , when trying to jump.
Please suggest.
Regards,
Biswarup

Jump Query Assignment Problem

Similar Messages

Maybe you are looking for