Just bought a Macbook Air. I does not appear to be compatible with my LCD projector. What LCD projectors work best with MacBook Air?

My Cannon LCD LV-7210 projector does not recognize my Macbook Air nor does my Macbook Air recognize it is attached to an LCD projector. Yes, I do have the proper adapter.
What LCD projectors work best with Macbook Air? Does this LCD projector have auto-detect for computer?
Thanks!

I've just purchased a *27in (aluminium case) LCD Cinema Display* and am using it with my MacBook Pro, linked by the supplied three-jack cable (Mini DVI display jack).
The 27" display uses Mini DisplayPort, not Mini DVI.
But I also have *a white-cased MacBook (purchased in 2008) which has an older type of display socket*, certainly not compatible with the Mini DVI type.
The early Mac Book uses Mini DVI.
1. Is there a cable or adaptor available to link my older MacBook to the Cinema Display? Nothing in the online store looks 'right'
No. Mini DVI is single-link, and does not support the resolution needed for the 27" display.

Similar Messages

After hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?

after hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

I just bought an iMac and it does not have IDVD on it. Isn't it supposed to have it????

I just bought an iMac and it does not have IDVD on it. Isn't it supposed to have it???? HEEELLLLPPP?

No, iDVD and iWeb are no longer included with Macs shipping with Lion preinstalled.
You will need to purchase iLife '11 on DVD if you need iDVD.

Just bought an iMac and it does not recognise my existing HP printer which is wifi - how do i connect it to my imac

just bought an iMac and it does not recognise my existing HP printer which is wifi - how do i connect it to my imac

It should recognize it if they are both on the same Wifi network. Have you signed into the Wireless network on your iMac?
Also, you must go into the Printer and log the printer into the wireless network. If the printer was working wirelessly before, this may have already been done.
If that does not help, tell us the model of the HP Printer.

HT203176 When I delete a file, it does not appear in the Trash - How can I fix this. Its a brand new MacBook Pro 17'

When I delete a file, it does not appear in the Trash - How can I fix this. Its a brand new MacBook Pro 17''

http://www.thexlab.com/faqs/trash.html for starters.

HT201263 My iPod touch is stuck in recovery mode, but when I connect it to my computer to restore it, my computer does not recognize it. It does not appear as a device in my iTunes. What can I do to restore it/make my computer recognize it?

My iPod touch is stuck in recovery mode, but when I connect it to my computer to restore it, my computer does not recognize it. It does not appear as a device in my iTunes. What can I do to restore it/make my computer recognize it?

DId it successfully connect to this computer before?
Try:
iOS: Device not recognized in iTunes for Windows
or
V
Also try placing the iPod in DFU mode and then try restoring
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

I updated my Iphone 3gs to 6.1.3 after that I am having this message "Your iPhone could not be activated because the activation server is temporarily unavailable." "The SIM card inserted in this iPhone does not appear to be supported" plz help me! what s

I updated my Iphone 3gs to 6.1.3, after that m having this message:
"Your iPhone could not be activated because the activation server is temporarily unavailable."
"The SIM card inserted in this iPhone does not appear to be supported"
plz help me! what should i do now?

You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one.

ICloud symbol in settings does not appear, instead there is the one for MobileMe, what do I have to do or didn't do well?

iCloud symbol in settings does not appear, instead there is the one for MobileMe, what do I have to do or didn't do well?
Thanks in advance

If your Mac is one year old it did not come with Lion, so you must have purchased and installed it yourself, or it is not installed.
Do this
Go to Apple Menu>About This Mac:
It should look like this:
If your version is anything other than 10.7.xx you do not have Lion (10.6 is Snow Leopard)

Can't perform a Apple Hardware Test because the alternate menu does not appear after pressing "D" while it restarts. What can I do?

I followed the instructions on the macbook manual and inserted the disk, i pressed and hold "D" but the menu did not appear.
I want to know if there is anything that can be done.
Thanks

Is the DVD you are trying to use the original install DVD or a retail Snow Leopard DVD

Error The file just loaded does not appear to be executable.

Hi there,
I have some problems with a Sun Fire T2000. Solaris 10 was installed one year ago. The server went down and now I am trying to connect to recover the dates and make a new installation.
Booting the server, I don't get any message. If I type #. I reach to sc> mode and from there I can get to ok prompt. From either mode, I can't get in the operating system.
From the ok prompt I issued "show-disks" and I booted with the cdrom choosing the option from the output of "show-disks". I got the "The file just loaded does not appear to be executable."
I searched the error and then I booted with "boot cdrom -s" and I got the "ERROR: /virtual-devices@100/console@1: Last Trap: Division by Zero".
Please advice for a new installation.
Thank you.

Hi, and again thanks.
I understood that this server runs on different levels, like with firmware OpenBoot (ok prompt) or System Controll (sc>).
I understood the different setups can be made from ok prompt, like the problem I have now.
I am at the ok prompt. The "printenv" showed me that I was booting from net1, which is wrong because the installation just ended. So I changed to "disk" following your indications. I checked with printenv and indeed the boot sequence was changed to boot disk.
I issued the boot command I after the message "Boot device: disk File and args:" it looks like hanging. I am sure I can get back to sc> prompt but it looks like a loop to me: how do I get into the operating system? I looks I can switch only from ok to sc and backwards. But, after booting I'd like to enter in Solaris OS, not OpenBoot firmware or System Control...
Thank u for the time and listening.

I bought an iPhone 5 but does not accept sim card.How to do?

I bought an iPhone 5 but does not accept sim card.How to do?

Exactly, what do you mean by "does not accept sim card"? Are you saying you purchased a carrier locked iPhone & you can't use a sim from a different carrier? If so, that's the way it works. Carrier locked iPhones can only be used/activated on the carrier's network the phone is locked to. Either return it for a refund or contact the carrier the phone is locked to to see if they offer official unlocking.

Email sent from MacBookAir does not appear on iphone or other windows?

Hi All,
Just started using MackBook Air, love it. Can someone guide me please. When i send an email from MacBook Air, it does not appear in the "Sent" folder on the iphone or other computer?
How can i fix this issue, so that whatever email i send using yahoo or etc, appears on all, ie MacBook Air, iphone, windows.
Thanks
A

That will happen under two conditions:
You have an IMAP mail account, such as iCloud.
You select the option to store sent messages on the server in the account settings.

Purchased music does not appear in library

I just purchased an album but it does not appear in my library. Thinking I screwed something up went back into store to purchase. When I clicked purchase a pop up said you have already purchased this do you want to purchase again, a pop up said you purchased this already do you want to purchase again? I clicked No. Where is my music?

All purchased items will be put in the "iTUnes Music" folder on the PC where you bought them and then added tot he green "Purchased" playlist.
When you add these files to a new PC/iTUnes library tho, there not automaticly added to the purchased playlist. So first search the itunes main music library for purchased items. If not listed search the PC by going to Start>Search in windows select "Files and folders" (Not music) and in the search field put ".M4P" and search the PC

Acrobat 9 does not appear in Install of CS4

I have acrobat 8 pro running on my machine and just installed cs4. Acrobat 9 does not appear on the install menu. Any suggestions?

Acrobat 9 is the cinderella of CS4 upgrades.
Check if it appears as installed in the 'add/remove software' panel' under Adobe CS4. If it is, uninstall, restart, and install again. If it isn't same without uninstalling (hehe).
I had to do this several times and still could't get MSOffice documents printed as pdf.
If you have that problem as well, try this:
Delete all instances of Adobe pdf maker from Printers.
Start Acrobat and try creating a new pdf out of an existing Office doc.
If you're lucky, Acrobat's self-repair function should start and solve the problem (I think I had to restart for this though).
Hope this helps.

Album artwork does not appear in album list or grid

I added album artwork (did get info then copy and paste) and it shows up fine in cover flow but does not appear in album list or grid view.
What am I doing wrong? Artwork files were scanned from album covers that I have.

Your album artwork cache may be corrupt. Provided most, if not all, of your artwork is embedded you can simply delete the Album Artwork folder that you will find inside your main iTunes folder and then scroll slowly through the library in Grid/Albums mode to rebuild it. Any images that were "downloaded" rather than embedded will need to be reacquired.
Threre are separate folders for the downloaded and cached images, but I've always gone for a complete rebuild so I don't know it would work to delete just the cached folder.
tt2

Just bought a Macbook Air. I does not appear to be compatible with my LCD projector. What LCD projectors work best with MacBook Air?

Similar Messages

Maybe you are looking for