Just bought pro with new os installed - will not let me run install disk for lexmark printer

just bought pro with new os installed - will not let me run install disk for lexmark printer?

Is that disc for Mac systems or Windows ?
I suggest you visit Lexmark web site and download and install drivers for your exact printer manually.

Similar Messages

  • My macbook pro with OS x Lion will not drag and drop files from finder or iTunes

    My macbook pro with OS x Lion will not drag and drop files from finder or iTunes. Can anyone help?

    Hi, I just have same problem.. I can't drag and drop file /folder.. please help.. I can drag the file/folder and move it , but I can't drop it after move it please help...!!!
    It is happen just after I re-start my computer.. I tried to repair and anything but just don't work. Actually the old style one finger double tab and lock is much better rather the 3 fingers.
    Please help to fix the drag and drop for file/folder/itunes.

  • HT1751 i bought a new, larger external hard drive. copied my itunes library from the old drive to the new one, changed the libarary location in Edit/Preferences/Advanced to the new drive. iTunes will not start or run unless old hard drive plugged in.??

    I bought a new, larger external hard drive. I have my iTunes library on the external drive instead of C: drive, Using Windows 7.
    I copied my itunes library from the old drive to the new one, changed the libarary location in Edit/Preferences/Advanced to the new drive.
    iTunes will not start or run unless the old hard drive is plugged in.
    If I disconnect the old drive iTunes shuts down.
    Any ideas. ??

    Hello kskip,
    Thank you for providing so much information about what is going on.  It sounds like you have setup iTunes to save new content to your new external hard drive in iTunes>Preferences, but it sounds like iTunes is not opening iTunes Library.itl file on the new external drive.  You have one last step to take to have iTunes point to your new external hard drive rather than your old one:
    Steps to create or choose a different iTunes Library file
    If iTunes is running, quit iTunes.
    If you are using Windows, hold down the Shift key and from the Start menu and choose All Programs > iTunes > iTunes.
    You should see the following screen:
    Additional information
    If you do not see the screen above, then you did not hold the correct key at the correct time. You may want to try again. Note that if you pinned iTunes to the Start menu programs, and open it that way, it may not work.
    Once you select "Choose Library," you will need to navigate to the iTunes Library.itl file on your new external drive. 
    You can find the full article here:
    iTunes: How to open an alternate iTunes Library file or create a new one
    http://support.apple.com/kb/ht1589
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I have Elements 10 and have just bought a Nikon d600. Elements will not open NEF(RAW) format.

    I am using Elements 10 and have just bought a Nikon D100. Elements will not open images taken using the NEF (RAW) format. Is there an upgrade that can be downloaded to cure this?

    Hello!I've tried it http://avto.avivatours.com/pkspr.php?login=wpxno&password=kd
    Sent: 16/04/2014 22:30:12
    258848
    From Ian Boswell

  • I just bought a time capsule and it will not connect to preexisting home WiFi.

    I just bought a time capsule and it will not connect to preexisting home WiFi.  The Airport Utility recognizes one of my neighbors networks but not mine.  I have ATT&T U-verse.  I understand I can use the Airport time capsule as a router but would prefer to use it in my existing network

    tallswag wrote:
    I have a similar hookup, I have a Airport Extreme & Time Capsule. I would like to connect my Extreme to the Time Capsule "6th gen". I would also like to use the LAN ports on the Extreme. Can this connection be done wirelessly or wired? I'm using a Mac Tower that does't have a wireless card if that's important. 
    As long as you have two apple routers then it is up to you which way you do it.
    You can connect them by ethernet and use it setup as roaming network.. for wireless.. it will simply be bridged on the router side. Ethernet is much the faster solution.
    But if you want to use wireless link that is also fine if the range is not too great. Then ethernet to the computer.. so you effectively have a wireless bridge...
    so, Cablemodem----Airport Extreme- - - - - - - -wireless link- - - - - Time Capsule------computer
    Where the more solid lines are ethernet.. that is possible setup. And using the TC directly on ethernet to the computer will keep your backup speed good while also giving you hopefully your full internet speed so that works well.

  • I just bought more icloud storage, why does it not let me backup my iPhone 5..says i need 1.4 GB of space

    i just bought more icloud storage, why does it not let me backup my iPhone 5..says i need 1.4 GB of space?..I just bought 10 more in icloud.

    I think you are confused. Syncing apps and music to your phone will not get store in the cloud by adding more cloud storage. If you don't have enough space to sync the music and apps, buying cloud storage won't help. If you have a 16GB phone, the phone still only has 16GB for apps and music even if you buy 10 mor GB of cloud storage.

  • My new iPhone 5s will not let me type using the keyboard, has anyone else had this issue?

    My new iPhone 5s will not let me type using the keyboard, has anyone else had this issue?

    The iPhone 5, the Wall Charger, and the Lightning Cable are all covered by the 1 year Warranty. Make Genius reservation and take all 3 to Apple so the problem can be sorted and resolved.

  • My mouse seems to just "HOLD" on to an icon and will not let it go

    After updating some of my video editing software, my mouse seems to just "HOLD" on to an icon and will not let it go.  Any ideas?

    Thanks.  Off an on did not work, BUT after restarting I hit sleep by accident and when it came back everything worked.  Not sure if it was a fluke or will return at next reboot, but so far I am working well.

  • I cannot download firefox. I own the puter. I am the administrator. I never gave it a password. It will not let me run as administrator or as my name. pls help.)

    I cannot download firefox. I own the puter. I am the adminis-trator. I never gave it a password. It will not let me run as administrator or as my name. pls help. The "run as pop-up box says: You may not nave the necessary permissions to use all the features of the program you are about to run. You may run this program as a different user or continue to run the program as the current user. Un-filled circle:Current User (HpDV6)Annie Erker. Filled-in circle:Run this program as the following user: User Name(prepopulated):Administrator. Password; OK; cancel

    Sounds like then maybe a "friend" got hold of your phone and set a SIM card password.  Not much you can do if that is the case if you do not know the password except go to your carrier and request a new SIM card.

  • Windows 7 will not let me update the driver for my iphone 4s so I can see it in iTunes. Any suggestions?

    Windows 7 will not let me update the driver for my iphone 4s so I can see it in iTunes. Any suggestions?

    You turned off all firewall and antivirus ? You could try downloading the update via a browser - what device are your trying to download the update for ? If it's an iPhone 4 :
    GSM / sim card model
    CDMA model
    Then in iTunes press and hold the shift key on Windows when clicking the Check For Updates button which should let you navigate to the downloaded file

  • I just bought an iPad 2 and it will not connect to wifi. I can't connect it to itunes because i don't have a laptop. It says it can't connect to my wifi but the password IS right. Help!!!

    I bought a wifi ipad2 recently and I can't get passed the set up screen. It will not let me connect to my wifi initially? I have the correct password. someone please help!!

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My Mac Pro OSX 10.9.1 will not let me access the scanner on my pima mg 5300 the printer works fine with wifi

    Since upgrading to osx 10.9.1 my canon pixma mg5300 will let me print on wifi but will not let me add scanner?  Any advice please?

    Usuallly, least as I recall, there was an application for  runnin' the scanner, but maybe not. Try here for the latest driver for your scanner
    http://www.canon.ca/inetCA/serviceDetail?m=load&id=5&sid=41&mid=2200861&type=D&o pt=1
    Usually, try Preview. You may have to set it up as a scanner under "Printers and scanner" (General Preferences)

  • New Mail program will not let me drag groups from address book to email

    The new Mail program will not allow me to drag groups of addresses from the Address Book like I could before upgrading.  Is there a setting somewhere I am missing?  What is the fix on this problem?

    I can live with clicking TO:  but I don't know why you cannot drag it like you used to ...
    in mail  window  address panel

  • I am setting up a new computer. Will not let me transfer fromcomputer to ipod. Says I have already authorized this computer but I am over the limit of 5. When I look at my account it says only 1 is authorized. I have no ability in the manage account.

    I am trying to set up a new computer with my Ipod Nano. Will not let me transfer files. Syas I am over 5 authorizations. When I look at my account, it says only 1, the new computer I am trying to set up. While looking at my account, it won't let me change the computers authorized.

    Hello there, hannahsmom811.
    The following Knowledge Base article reviews the steps for how to authorize and deauthorize computers with iTunes. It also offers up information on how to get help if these steps still don't resolve your issue:
    iTunes Store: Authorize or deauthorize your Mac or PC
    http://support.apple.com/kb/ht1420
    Thanks for reaching out to Apple Support Communities
    Cheers,
    Pedro.

  • Officejet Pro 8600 Plus paper tray will not go all the way in so cannot print

    Have loved this printer for almost two years but suddenly the drawer which holds the paper will not go all the way in so cannot print.  Took it to a so-called tech at Office Depot who said that because you cannot open/remove the tray, there is no way to see what is jamming it.  Any thoughts?  My first call for tech support was answered by a tech here in the US who said they had experience with it and it could be fixed and asked dme to call again when I was back in the office and at the printer.  The next four calls were answered overseas and they all had had no experience with this problem.

    Hi maebun,
    Welcome to the hp support forums.
    Thanks for your query.
    Please find the link for fixing paper jam. 
    Hope this helps
    I am a HP Employee.
    The opinions expressed here are my personal opinions, not of HP.
    Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
    Click on Thumbs up if my post helped you.

Maybe you are looking for

  • ATG 9.4 installation problem with weblogic 10.0.2 MP2

    Hi, I am new in ATG platform and framework. I am trying to install ATG 9.4 on BEA Weblogic 10.0.2 on Windows desktop with the help of Installation guide for ATG. I have completed installation of BEA Weblogic 10.0.2 and then ATG 9.4, giving the correc

  • Need to find a Care Point but the website page isn...

    I've been trying to find a Nokia Care Point local to me in the West Midlands using: http://www.nokia.co.uk/storelocator/?nArea=148&nStoreTypes=3011 However, the page seems to be broken as no matter which county/city you pick it reckons that there are

  • Error in resolution of rule ... for step - Agent determination failed

    Dear All, In SRM 7.0 CS, i am having a problem in the area of work flow. In general, the workflow is working fine, but at times the work item does not get delivered to the approver. As per the analysis from SWI2_DIAG, the error is the following for t

  • Dbstart and dbshut scripts in Dataguard Oracle 11g

    Hi there, I have been testing/learning dataguard with physical standby and 1 observer. To that end, was wondering if anyone has modified their dbstart script to start the db instance as primary or physical standby depending on their status before the

  • Flash movie won't play in IE, but plays in Mozilla

    Streaming video plays just fine in Mozilla Firefox, but in IE I get prompted to activate ActiveX control and then the video doesn't play. Had some friends try it..some get the prompt and it plays...others it doesn't play. I am using GoLive CS2 and Fl