Just FYI, new blog post "Deploy BranchCache Content and Hosted Cache Servers Using Windows PowerShell"

Just FYI, new blog post "Deploy BranchCache Content and Hosted Cache Servers Using Windows PowerShell" at
http://aka.ms/le85n3
Thanks -
James McIllece

Great to see new BranchCache content out there!
We created a BranchCache info page to try to get all of the relevant info into one place for V1 and 2
http://2pintsoftware.com/microsoftbranchcache
thanks
Phil
Phil Wilcock http://2pintsoftware.com @2pintsoftware

Similar Messages

  • Just FYI, new blog post "Deploy Border Gateway Protocol (BGP) with the RRAS Multitenant Gateway"

    This is just FYI about the new blog post for Windows Server 2012 R2, "Deploy Border Gateway Protocol (BGP) with the RRAS Multitenant Gateway," at
    http://bit.ly/OfDkty
    James McIllece

    Hi,
    Thanks for sharing and it would be greatly helpful to anyone who has requirements for that.
    Best regards,
    Susie

  • Just FYI, new blog post "New Posterpedia Content Now Available"

    Just FYI, new blog post "New Posterpedia Content Now Available" at
    http://bit.ly/1IYdFMA
    Thanks -
    James McIllece

    Great to see new BranchCache content out there!
    We created a BranchCache info page to try to get all of the relevant info into one place for V1 and 2
    http://2pintsoftware.com/microsoftbranchcache
    thanks
    Phil
    Phil Wilcock http://2pintsoftware.com @2pintsoftware

  • Just FYI, new blog post "Windows Server Networking Resources"

    Hi there -
    Just FYI, new blog post "Windows Server Networking Resources" at
    http://aka.ms/vrigwx
    Thanks -
    James McIllece

    Hi James,
    Thanks for the sharing.
    Best Regards.
    Steven Lee
    TechNet Community Support

  • Just FYI, new blog post "More Windows Server 2008 Guides Available in TechNet Gallery"

    Just FYI, new blog post "More Windows Server 2008 Guides Available in TechNet Gallery" at
    http://aka.ms/Sqatv1
    Thanks -
    James McIllece

    Hi James,
    Thanks for your sharing!
    Best Regards.
    Steven Lee
    TechNet Community Support

  • Just FYI, new blog post "New and Revised Networking Technologies for Windows Server Technical Preview"

    Just FYI, new blog post "New and Revised Networking Technologies for Windows Server Technical Preview" at
    http://aka.ms/xb9l0w
    Thanks -
    James McIllece

    Hi,
    Thanks for your good sharing.
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Just FYI, new blog post "Windows Server 2012 Server Certificate Deployment Guide Now Available in TechNet Gallery"...

    ...At
    http://gallery.technet.microsoft.com/Windows-Server-2012-Core-e0970aa7
    James McIllece

    Hi,
    Thanks for your sharing, the guide will very helpful for the network deploy and troubleshooting!
    Best regards.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Just FYI, new blog post "New Version of Posterpedia Now Live in Windows Store"

    ...At http://bit.ly/1kMe7S6
    Thanks -
    James McIllece

    Hi James,
    Thanks for your sharing! This is a greate guide which can give us a global network view.
    Best Reagrds.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Just FYI, new blog post "Windows Server 2008 Networking Guides Now Available in TechNet Gallery for Download"

    ...At http://aka.ms/Siafr9
    Thanks -
    James McIllece

    Hi James,
    Thanks for your sharing! This is a greate guide which can give us a global network view.
    Best Reagrds.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Just FYI, new blog post "New Windows Server Cloud Networking Technologies Documentation"

    ...At http://aka.ms/b2dtsw
    Thanks -
    James McIllece

    Hi James,
    Thanks for your sharing .
    Best Regards,
    Elton JI
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • Just FYI, the blog post "New! Posterpedia Universal App" is now available

    Just FYI, the blog post "New! Posterpedia Universal App" is now available at
    http://aka.ms/Tl0pd9
    Thanks -
    James McIllece

    Hi,
    Thanks for the sharing!
    Best Regards.
    Steven Lee
    TechNet Community Support

  • Just FYI, new Windows Server 2012 R2 RRAS Multitenant Gateway Deployment Guide

    New! Windows Server 2012 R2 RRAS Multitenant Gateway Deployment Guide
    This new guide is available on the Web at
    http://technet.microsoft.com/en-us/library/dn641937.aspx. It is also available for download in Word format at TechNet Gallery at
    http://gallery.technet.microsoft.com/Windows-Server-2012-R2-37eb8e17
    If you work for a Cloud Service Provider (CSP) or an organization that's planning on deploying cloud technologies, you might be interested in the new Windows Server 2012 R2 RRAS Multitenant Gateway Deployment Guide.
    You may already know that in Windows Server® 2012 R2, the Remote Access server role includes the Routing and Remote Access Service (RRAS) role service. (It also includes DirectAccess and Web Application Proxy, however those role services will not be discussed
    in this article.)
    The new deployment guide demonstrates how to use Windows PowerShell to deploy RRAS as a virtual machine (VM)-based multitenant software gateway and Border Gateway Protocol (BGP) router that allows CSPs and Enterprises to enable datacenter and cloud network
    traffic routing between virtual and physical networks, including the Internet.
    You can use the gateway with VM networks by using either Hyper-V Network Virtualization or Virtual Local Area Networks (VLANs) - but using Network Virtualization is recommended due to VLAN limitations such as difficult management and a limited number of
    available VLAN IDs.
    If you're using System Center Virtual Machine Manager (SC VMM), you can use SC VMM to deploy Windows Server Gateway; however even if you are using SC VMM, you can manage the gateway with the same Windows PowerShell commands that are used for the RRAS Multitenant
    Gateway. (Some Windows Server Gateway features are configurable only with Windows PowerShell.)
    For information on deploying Windows Server Gateway with SCVMM, see the Test Lab Guide: Windows Server 2012 R2 Hyper-V Network Virtualization with System Center 2012 R2 VMM, at
    http://www.microsoft.com/download/details.aspx?id=39284
    With the RRAS Multitenant Gateway, you can create site-to-site VPN connections between your tenants' physical locations and your cloud datacenter. You can also provide tenants with point-to-site VPN connections that allow tenant Administrators to access
    and manage their VM resources from anywhere. The RRAS Multitenant Gateway also allows you to configure Network Address Translation (NAT), so that tenant VMs can access the Internet, and you can deploy dynamic routing by configuring the gateway and tenant gateways
    with BGP.
    Thanks -
    James McIllece

    Hi,
    It is very useful , thanks for your sharing .
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and  TC. I set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or my wireless router but nothing. Just a flashing orange light. Help for a simpleton p

    Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and  TC. I tried to set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or direct to my wireless router but nothing. Just a flashing orange light. Help for a simpleton please. Have tried reseting TC, but to no avail.

    Just updated from 10.6.7 ---> 10.6.8 and had the same issue. Despite having done a clean install from 10.6 and got everything back off my TC, now Time Machine can't find it!
    Green light is on, ethernet cable conected, network CP says its conected but nothing. Airport Utility can't find it. Hit reset button, Orange flashing light but still no show in Airport Utility.
    But I know its there, as rebooting from 10.6 SL disk shows the backups are still ok?
    Hmm, ideas anyone?
    SBB

  • Just got new hard drive installed from apple and my old password doesn't work and it won't let me change it

    just got new hard drive installed from apple and my old password doesn't work and it won't let me change it.cant install anything ,pls help,thx

    Camera works. Now gotta find out about this mic thing

  • Not able to debug Provider Hosted App in local (Deployed in Azure and Hosted in Office 365)

    I have Provider Hosted App - Deployed in Azure and Hosted in Office 365. 
    Deployed successfully on azure after attaching publishing profile of azure.
    Now I wish to debug app in local?

    Hi,
    According to your post, my understanding is that you want to debug SharePoint provider hosted app in local.
    Per the previous thread, to debug SharePoint provider hosted app in local, we should configure S2S authentication.
    You can follow the article below to build the high trust app, then you can debug the app locally.
    http://blog.karstein-consulting.com/2013/01/08/create-provider-hosted-high-trust-app-for-sharepoint-2013-short-guide/
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

Maybe you are looking for

  • Multi-user multi-head setup

    Purely out of curiosity, I would like to create the following setup: Computers: 1 (i.e. 1 motherboard) Physical displays: N Keyboards, mice: N Processor: >= N cores ...and have a separate tty allocated to each monitor/mouse/keyboard group such that N

  • "Can't get Action from Action Reference"?

    I really can't figure out why I get java.lang.IllegalArgumentException with "Can't get Action from Action Reference: BeanName.actionName" message. I specified all properties in faces-config.xml. Bean and its action names are all checked several times

  • From customize report to customise transaction code

    Hi, I want to pass data from basic list (from my customize report) , when I double click, I want to call my z transaction code field and the field type is P length 8 decimals 2.and the data which i want to pass is also same data type. hoe to do.. can

  • How does XI pick up idoc-file sitting in SAP?

    Hi All, Our scenario is SAP (Idoc) --> XI --> Bank(FTPS). We are creating idoc-file in SAP system and want transfer this file using XI to bank FTP server. This what we done in SAP system: 1) Created FILE port pointing to physical directory in SAP sys

  • Integration with Restful webservice i..e Request details

    Dear Experts, After going through several blogs and attempting in system , I am not really convinced with the way my results are shaping up. There are 2 systems SAP ABAP portal and JAVA portal. I am having a scenario when any user logs in ABAP web dy