Just got the iPad mini. Why can't I view my Facebook profile? (I'm using the Facebook app) I can open my News Feed but when I go to my page, it comes out with a notice "page doesn't exist, or you don't have permission to view this page" HELP!
It's frustrating to not be able to view my own Facebook page using the iPad mini. I have the iPad 1 and the Facebook app works fine there, I can see my personal FB page with 1. Is this characteristic of the iPad mini only?
Try this:
Make sure IOS is updated to latest version
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings
(no media or data will be deleted from the device, this will only take a minute).
If none of those work, delete the app and install it again.
Similar Messages
-
CS4 Admin "You don't have permission to edit this page"
I am new to Contribute. Created a website in Dreamweaver CS4, using templates, can put and checkin files, seems fine. FTP client has full access to all folders. Site in browser OK, Dreamweaver OK. Contribute starts and connects OK, access via FTP. I am the Admin. No lock files. For some reason Contribute won't let me edit most pages - getting error bar below Address that says "You don't have permission to edit this page". On some pages the bar is not there, but when I click on Edit Page button a dialog box pops up with the same message. I tried deleting the _mm folder and recreated the site admin info. Still no luck.
Does this sound familiar? Anyone know how to troubleshoot? Does Contribute write out debug logs? Any ideas what to try? Thanks!A bit more info, I hope it helps. We do not use Contribute Publishing Server. In Contribute I can create a new page derived from a template and publish it. If I try to browse to that page again it says I don't have permission to edit the page. We use FTP to connect. There is only one FTP account for the website, so it's not an issue of Dreamweaver logging in differently from Contribute. My standalone FTP client is FileZilla and I cannot view folder or file permissions directly in that program.
-
I may have accidentally trashed my iPhoto library (fomr the pictures folder). No problem, I thought1. I;ll jsut resore it using Time Machine, but I have tried it several times and get the message "You don't have permission to accesss the iPhoto library". How can this be? Any help will be appreciated.
Welcome to the Apple Support Communities
It's a known problem using Time Machine. Read > http://pondini.org/TM/E9.html -
why is the ipad mini screen so delicate I just got my ipad mini yesterday and it fell of a stand I bought and now the screen is cracked
My Ipad 3 is the same, it must be a design fault cuz I dropped a pound coin on my ipad screen and it shattered and every other week there's a new dent or scratch, though I wouldn't say I'm overly rough with it. I use it a lot, like most do, so accidents will happen and Apple hav to allow for that. I deffently wouldn't say that they are worth the money for the amount of trouble they cause, they r great devices, just far too delicate and expensive!
-
When I try to open images I am getting this message: "The file “image.jpg” couldn’t be opened because you don’t have permission to view it." "Which I've tried - but it's not responding, plus its with all images now. Can anyone help?
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.iBooksX
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Hello this week I'm unable to open any pdf's with preview, when I select to open a window opens up with message "file couldn't be opened because you don't have permission to view it" none of the pdf's have any security thanks if you can assist
Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
I can't seem to open (view) my photos. I get an error message that says "the file couldn't be opened because you don't have permission to view it. To view or change permission, select the item in the finder and choose File. Get info." I have never had this happen before? Thanks!
Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #1, Repair Permissions.
OT -
The file couldn't be opened because you don't have permission to view it
Everytime I time to open a PDF file in Preview I get the msg, the file couldn't be opened because you don't have permission to view it. I have checked the GET INFO and all permissions are correct. Does anyone know how to solve this problem?
Thank you.Back up all data.
Quit the application, if it's running.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.Preview
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu. A Finder window should open with a folder selected. If it does, move the selected folder—not just its contents—to the Desktop.
The folder you're moving has a name that begins with "com." It is not the subfolder named "Data" or anything else.
Launch the problem application and test. If it works now, delete the folder you moved. Otherwise, quit again, and put the folder back where it was, overwriting the one that may have been created in its place.
Caution: If you delete some or all of the contents of the selected folder, but leave the folder itself in place, the application may not launch. Deleting the folder will cause it to be rebuilt automatically. -
The file "aaa.jpg" couldn't be opened because you don't have permission to view it
The file “aaaa.jpg” couldn’t be opened because you don’t have permission to view it.
This message is coming up every time i try to look at a photo on my Mac . This is new ... does anyone know what has happened?Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’renot going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
Preview gives error "The file ... couldn't be opened because you don't have permission to view it."
Yesterday I could access all my pdf´s with Preview. Today I get the error "The file ... couldn’t be opened because you don’t have permission to view it." upon opening a pdf file with Preview. All other pdf viewers open the files with no problem.
I repaired permissions with disk utitlity with no success.I booted into recovery and repaired disk permissions with the disk utility from there. That fixed it. Apperently it repairs more stuff than when you´re booted into the OS. But what an annoying bug, this happened twice to me already by now...
-
I scanned a doc into my mac air and I got a message: file couldn't not be opened because you don't have permission to view it. I have done this many times before and never had a problem. What should I do?
cashewnut12 wrote:
Please help. I need to get this work done.
the problem is not solved. I need help
Now that you have marked your question as solved there will be little interest in it and little chance of a solution for you.
Start a new thread, don't mark it as solved until it is. -
The file "Scan 30.pdf" couldn't be opened because you don't have permission to view it
Whats with the message?
Hi Number1inchrist,
Welcome to Apple Support Communities.
The article linked below provides steps that you can follow to change the permissions on most files.
OS X Mavericks: If you don’t have the correct permissions to open a file or folder
http://support.apple.com/kb/PH13752
I hope this helps.
-Jason -
Why do I get"You do't have permmission to perform this task" when I try to restore an application from Time Machine backup on my Imac running Mavericks?
See Pondini's TM FAQs, for details.
-
"The file "_" couldn't be opened because you don't have permission to view it." on Ipad.
It happens whilest adding files from PC to Ipad (*.png) using Itunes... Is this solveable in any way?? Its driving me crazy!
Oh, and it takes HOURS with Itunes! :/ (50mb)I booted into recovery and repaired disk permissions with the disk utility from there. That fixed it. Apperently it repairs more stuff than when you´re booted into the OS. But what an annoying bug, this happened twice to me already by now...
-
I've only noticed this since the software update (10.7.1), but I've got a big problem with preview at the moment. I'm trying to open some PDFs (journal articles) saved on my MacBook Pro, which I've previously had no trouble opening, but all I get is an error message saying:
"The file couldn’t be opened because you don’t have permission to view it. To view or change permissions, select the item in the Finder and choose File > Get Info."
I then go to get info for the file, and see that I DO have read and write permission for the file. But it still won't let me open it.
I'm trying to write my Masters dissertation (due in in less than 2 weeks) and it is ESSENTIAL that I'm able to view these files to complete it. Needless to say this is making me very stressed out and frustrated! I'm almost certain they all worked before the 10.7.1 update, but can't be 100% sure.
Any guidance on this would be much appreciated.
Thanks,
GeorgeThanks for trying to help but this is a different issue - see my post for details. I'm pretty sure sandboxing is the cause: you can only access files via bookmarks etc if you have already explicitly opened them.
From: http://developer.apple.com/library/mac/#documentation/Security/Conceptual/AppSan dboxDesignGuide/AppSandboxInDepth/AppSandboxInDepth.html
"Your sandboxed app can access file system locations outside of its container in the following three ways:
At the specific direction of the user
By using entitlements for specific file-system locations (described in “Entitlements and System Resource Access”)
When the file system location is in certain directories that are world readable"
Maybe you are looking for
-
How do you re-encode h.264 video without artifacts?
Hi I have a video that was exported out of Premiere using h.264 at max 20mbps. All is good. Since the export takes 10+ hours I now want to create a version for Vimeo and Youtube. Becuase of the file size I don't want to upload the entire 2GB file to
-
Making a Text File in Microsoft Virtual Studio Xaml App
I'm trying to save kinect data to a text file, but first I'm trying to get any text file to start with. I have found a number of places that say to use: TextWriter tw = new StreamWriter("TestFile" + ".txt"); tw.WriteLine("test"); tw.
-
Problem with a JDBC Adapter when connect to Instance on SQL Server
Hi, Currently I'm setting up a communication channel with the JDBC adapter to work on a SQL Server database. When I use a string without specifying the connection instance, the JDBC driver takes the default instance and connects to a database without
-
Hi Gurus, I want to know about SAP Insurance Certification course
Hi Gurus, I want to know about SAP Insurance Certification course. Can anyone guide me how to proceed. Regards Raghu
-
How do I fix Error Message = Out Of Memory Could Not Install or Delete Data"
I have looked all over the internet and there is a lot of discussion about WHY this happens and a lot of discusion about what to do in the future to avoid this from happening. I need help with specific steps on how to delete the static image that is